@@ -108,6 +108,7 @@ obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
+ board-zoom-flash.o \
hsmmc.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o \
hsmmc.o
@@ -38,6 +38,7 @@
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
+#include <mach/board-zoom.h>
#include <asm/delay.h>
#include <plat/control.h>
@@ -389,6 +390,45 @@ static struct omap_musb_board_data musb_board_data = {
.power = 100,
};
+static struct mtd_partition zoom_nand_partitions[] = {
+ /* All the partition sizes are listed in terms of NAND block size */
+ {
+ .name = "X-Loader-NAND",
+ .offset = 0,
+ .size = 4 * (64 * 2048), /* 512KB, 0x80000 */
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot-NAND",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
+ .size = 10 * (64 * 2048), /* 1.25MB, 0x140000 */
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "Boot Env-NAND",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
+ .size = 2 * (64 * 2048), /* 256KB, 0x40000 */
+ },
+ {
+ .name = "Kernel-NAND",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x0200000*/
+ .size = 240 * (64 * 2048), /* 30M, 0x1E00000 */
+ },
+ {
+ .name = "File System - NAND",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x2000000 */
+ .size = MTDPART_SIZ_FULL, /* 96MB, 0x6000000 */
+ },
+
+};
+
+static struct flash_partitions zoom_flash_partitions[] = {
+ {
+ .parts = zoom_nand_partitions,
+ .nr_parts = ARRAY_SIZE(zoom_nand_partitions),
+ },
+};
+
static void __init omap_ldp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -401,6 +441,7 @@ static void __init omap_ldp_init(void)
ads7846_dev_init();
omap_serial_init();
usb_musb_init(&musb_board_data);
+ zoom_flash_init(zoom_flash_partitions, ZOOM_NAND_CS);
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */