diff mbox

[v2,05/11] Kbuild: don't add obj tree in additional includes

Message ID 21521763.EfAflxWUP8@wuerfel (mailing list archive)
State New, archived
Headers show

Commit Message

Arnd Bergmann July 19, 2016, 8:31 a.m. UTC
On Monday, July 18, 2016 10:14:39 PM CEST Michal Marek wrote:
> On Wed, Jun 15, 2016 at 05:45:47PM +0200, Arnd Bergmann wrote:
> > When building with separate object directories and driver specific
> > Makefiles that add additional header include paths, Kbuild adjusts
> > the gcc flags so that we include both the directory in the source
> > tree and in the object tree.
> > 
> > However, due to another bug I fixed earlier, this did not actually
> > include the correct directory in the object tree, so we know that
> > we only really need the source tree here. Also, including the
> > object tree sometimes causes warnings about nonexisting directories
> > when the include path only exists in the source.
> > 
> > This changes the logic to only emit the -I argument for the srctree,
> > not for objects. We still need both $(srctree)/$(src) and $(obj)
> > though, so I'm adding them manually.
> > 
> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> 
> Hi Arnd,
> 
> I applied the series up to this patch to kbuild.git#kbuild. The rest
> seem to be related but not dependent patches, so I'll leave it up to the
> respective maintainers to pick them up. Is that OK with you?

I think that's fine, a couple were already picked up, and what I have
left now is

a281bfa5713a [SUBMITTED 20160615] [EXPERIMENTAL] Kbuild: enable -Wmissing-include-dirs by default
83934921e68e [SUBMITTED 20160615] rtlwifi: don't add include path for rtl8188ee
5664e7bb88a8 [SUBMITTED 20160615] drm: amd: remove broken include path
e6d3cf76f9f8 [SUBMITTED 20160615] ARM: hide mach-*/ include for ARM_SINGLE_ARMV7M
b21947dbd792 [SUBMITTED 20160615] ARM: don't include removed directories

I can probably put the last two into arm-soc directly. After that, we'd
be left with a very small diff for the series:




I have only tested this on arm, arm64 and x86, so I don't know if that
introduces new warnings, but we could ask Andrew if he wants to add that
to linux-mm after the merge window.

	Arnd

Comments

Kalle Valo July 19, 2016, 2:33 p.m. UTC | #1
Arnd Bergmann <arnd@arndb.de> writes:

> On Monday, July 18, 2016 10:14:39 PM CEST Michal Marek wrote:
>> On Wed, Jun 15, 2016 at 05:45:47PM +0200, Arnd Bergmann wrote:
>> > When building with separate object directories and driver specific
>> > Makefiles that add additional header include paths, Kbuild adjusts
>> > the gcc flags so that we include both the directory in the source
>> > tree and in the object tree.
>> > 
>> > However, due to another bug I fixed earlier, this did not actually
>> > include the correct directory in the object tree, so we know that
>> > we only really need the source tree here. Also, including the
>> > object tree sometimes causes warnings about nonexisting directories
>> > when the include path only exists in the source.
>> > 
>> > This changes the logic to only emit the -I argument for the srctree,
>> > not for objects. We still need both $(srctree)/$(src) and $(obj)
>> > though, so I'm adding them manually.
>> > 
>> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>> 
>> Hi Arnd,
>> 
>> I applied the series up to this patch to kbuild.git#kbuild. The rest
>> seem to be related but not dependent patches, so I'll leave it up to the
>> respective maintainers to pick them up. Is that OK with you?
>
> I think that's fine, a couple were already picked up, and what I have
> left now is
>
> a281bfa5713a [SUBMITTED 20160615] [EXPERIMENTAL] Kbuild: enable -Wmissing-include-dirs by default
> 83934921e68e [SUBMITTED 20160615] rtlwifi: don't add include path for rtl8188ee

Apparently[1] you didn't CC linux-wireless and that's why I didn't see
the rtlwifi patch in wireless patchwork. Care to resend?

[1] https://patchwork.kernel.org/patch/9178861/
Arnd Bergmann July 19, 2016, 3:38 p.m. UTC | #2
On Tuesday, July 19, 2016 5:33:44 PM CEST Kalle Valo wrote:
> Arnd Bergmann <arnd@arndb.de> writes:
> 
> > On Monday, July 18, 2016 10:14:39 PM CEST Michal Marek wrote:
> >> On Wed, Jun 15, 2016 at 05:45:47PM +0200, Arnd Bergmann wrote:
> >> > When building with separate object directories and driver specific
> >> > Makefiles that add additional header include paths, Kbuild adjusts
> >> > the gcc flags so that we include both the directory in the source
> >> > tree and in the object tree.
> >> > 
> >> > However, due to another bug I fixed earlier, this did not actually
> >> > include the correct directory in the object tree, so we know that
> >> > we only really need the source tree here. Also, including the
> >> > object tree sometimes causes warnings about nonexisting directories
> >> > when the include path only exists in the source.
> >> > 
> >> > This changes the logic to only emit the -I argument for the srctree,
> >> > not for objects. We still need both $(srctree)/$(src) and $(obj)
> >> > though, so I'm adding them manually.
> >> > 
> >> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> >> 
> >> Hi Arnd,
> >> 
> >> I applied the series up to this patch to kbuild.git#kbuild. The rest
> >> seem to be related but not dependent patches, so I'll leave it up to the
> >> respective maintainers to pick them up. Is that OK with you?
> >
> > I think that's fine, a couple were already picked up, and what I have
> > left now is
> >
> > a281bfa5713a [SUBMITTED 20160615] [EXPERIMENTAL] Kbuild: enable -Wmissing-include-dirs by default
> > 83934921e68e [SUBMITTED 20160615] rtlwifi: don't add include path for rtl8188ee
> 
> Apparently[1] you didn't CC linux-wireless and that's why I didn't see
> the rtlwifi patch in wireless patchwork. Care to resend?
> 
> [1] https://patchwork.kernel.org/patch/9178861/
> 

Done. I've also thrown in two patches for drivers/staging/rtl8*/ that I submitted
a while ago, but I'm not sure if they should get merged through the staging
tree or the wireless tree. I had previously submitted those two as a combined
patch along with a third one that turned out to be unnecessary.

	Arnd
Kalle Valo July 19, 2016, 6:07 p.m. UTC | #3
Arnd Bergmann <arnd@arndb.de> writes:

>> > I think that's fine, a couple were already picked up, and what I have
>> > left now is
>> >
>> > a281bfa5713a [SUBMITTED 20160615] [EXPERIMENTAL] Kbuild: enable -Wmissing-include-dirs by default
>> > 83934921e68e [SUBMITTED 20160615] rtlwifi: don't add include path for rtl8188ee
>> 
>> Apparently[1] you didn't CC linux-wireless and that's why I didn't see
>> the rtlwifi patch in wireless patchwork. Care to resend?
>> 
>> [1] https://patchwork.kernel.org/patch/9178861/
>> 
>
> Done.

Thanks.

> I've also thrown in two patches for drivers/staging/rtl8*/ that I
> submitted a while ago, but I'm not sure if they should get merged
> through the staging tree or the wireless tree. I had previously
> submitted those two as a combined patch along with a third one that
> turned out to be unnecessary.

Greg applies drivers/staging patches to his staging tree, but I'll take
the rtlwifi patch.
diff mbox

Patch

diff --git a/Makefile b/Makefile
index caa33e007a8c..53074dbe8619 100644
--- a/Makefile
+++ b/Makefile
@@ -754,6 +754,9 @@  endif
 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
 CHECKFLAGS     += $(NOSTDINC_FLAGS)
 
+# warn about incorrect -I include paths
+KBUILD_CFLAGS += -Wmissing-include-dirs
+
 # warn about C99 declaration after statement
 KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 
diff --git a/drivers/gpu/drm/amd/acp/Makefile b/drivers/gpu/drm/amd/acp/Makefile
index 8363cb57915b..8a08e81ee90d 100644
--- a/drivers/gpu/drm/amd/acp/Makefile
+++ b/drivers/gpu/drm/amd/acp/Makefile
@@ -3,6 +3,4 @@ 
 # of AMDSOC/AMDGPU drm driver.
 # It provides the HW control for ACP related functionalities.
 
-subdir-ccflags-y += -I$(AMDACPPATH)/ -I$(AMDACPPATH)/include
-
 AMD_ACP_FILES := $(AMDACPPATH)/acp_hw.o
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/Makefile b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/Makefile
index a85419a37651..676e7de27f27 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/Makefile
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/Makefile
@@ -12,4 +12,4 @@  rtl8188ee-objs :=		\
 
 obj-$(CONFIG_RTL8188EE) += rtl8188ee.o
 
-ccflags-y += -Idrivers/net/wireless/rtlwifi -D__CHECK_ENDIAN__
+ccflags-y += -D__CHECK_ENDIAN__