diff mbox

[3/3] dmaengine: at_hdmac: add slave config operation

Message ID 1151852b20789636633095406a180335364f4afb.1309259835.git.nicolas.ferre@atmel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Nicolas Ferre June 28, 2011, 11:17 a.m. UTC
Only change source/destination peripheral register access width.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/dma/at_hdmac.c |   29 +++++++++++++++++++++++++++++
 1 files changed, 29 insertions(+), 0 deletions(-)

Comments

Vinod Koul July 7, 2011, 2:33 a.m. UTC | #1
On Tue, 2011-06-28 at 13:17 +0200, Nicolas Ferre wrote:
> Only change source/destination peripheral register access width.
How about a little more explainable change log

> 
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
>  drivers/dma/at_hdmac.c |   29 +++++++++++++++++++++++++++++
>  1 files changed, 29 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
> index 7096adb..9cb8044 100644
> --- a/drivers/dma/at_hdmac.c
> +++ b/drivers/dma/at_hdmac.c
> @@ -954,6 +954,35 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
>  		clear_bit(ATC_IS_PAUSED, &atchan->status);
>  
>  		spin_unlock_irqrestore(&atchan->lock, flags);
> +	} else if (cmd == DMA_SLAVE_CONFIG) {
> +		struct dma_slave_config *dmaengine_cfg = (void *)arg;
> +		struct at_dma_slave	*atslave = chan->private;
This API was created to remove chan->private, so this doesn't make sense
at all. If your intent is to have a channels internal data, then you
should consider embedding dma_chan into this structure (the way other
dma drivers do) rather than using private field.
> +		enum dma_slave_buswidth sdma_width;
> +		enum at_dma_slave_width	atdma_width;
> +
> +		/* only modify transfer size width */
> +		if (!atslave)
> +			return -ENXIO;
> +
> +		if (dmaengine_cfg->direction == DMA_FROM_DEVICE)
> +			sdma_width = dmaengine_cfg->src_addr_width;
> +		else
> +			sdma_width = dmaengine_cfg->dst_addr_width;
> +
> +		switch (sdma_width) {
> +		case DMA_SLAVE_BUSWIDTH_1_BYTE:
> +			atdma_width = AT_DMA_SLAVE_WIDTH_8BIT;
> +			break;
> +		case DMA_SLAVE_BUSWIDTH_2_BYTES:
> +			atdma_width = AT_DMA_SLAVE_WIDTH_16BIT;
> +			break;
> +		case DMA_SLAVE_BUSWIDTH_4_BYTES:
> +			atdma_width = AT_DMA_SLAVE_WIDTH_32BIT;
> +			break;
> +		default:
> +			return -EINVAL;
> +		}
> +		atslave->reg_width = atdma_width;
>  	} else if (cmd == DMA_TERMINATE_ALL) {
>  		struct at_desc	*desc, *_desc;
>  		/*
Nicolas Ferre July 25, 2011, 9:12 p.m. UTC | #2
On 07/07/2011 04:33 AM, Vinod Koul wrote:
> On Tue, 2011-06-28 at 13:17 +0200, Nicolas Ferre wrote:
>> Only change source/destination peripheral register access width.
> How about a little more explainable change log
>
>>
>> Signed-off-by: Nicolas Ferre<nicolas.ferre@atmel.com>
>> Signed-off-by: Uwe Kleine-König<u.kleine-koenig@pengutronix.de>
>> ---
>>   drivers/dma/at_hdmac.c |   29 +++++++++++++++++++++++++++++
>>   1 files changed, 29 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
>> index 7096adb..9cb8044 100644
>> --- a/drivers/dma/at_hdmac.c
>> +++ b/drivers/dma/at_hdmac.c
>> @@ -954,6 +954,35 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
>>   		clear_bit(ATC_IS_PAUSED,&atchan->status);
>>
>>   		spin_unlock_irqrestore(&atchan->lock, flags);
>> +	} else if (cmd == DMA_SLAVE_CONFIG) {
>> +		struct dma_slave_config *dmaengine_cfg = (void *)arg;
>> +		struct at_dma_slave	*atslave = chan->private;
> This API was created to remove chan->private, so this doesn't make sense
> at all. If your intent is to have a channels internal data, then you
> should consider embedding dma_chan into this structure (the way other
> dma drivers do) rather than using private field.

Yes, I need to rework this slave config part of the driver (and its 
related calling drivers).

So please drop this 3/3 patch of the series.

Best regards,
diff mbox

Patch

diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 7096adb..9cb8044 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -954,6 +954,35 @@  static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 		clear_bit(ATC_IS_PAUSED, &atchan->status);
 
 		spin_unlock_irqrestore(&atchan->lock, flags);
+	} else if (cmd == DMA_SLAVE_CONFIG) {
+		struct dma_slave_config *dmaengine_cfg = (void *)arg;
+		struct at_dma_slave	*atslave = chan->private;
+		enum dma_slave_buswidth sdma_width;
+		enum at_dma_slave_width	atdma_width;
+
+		/* only modify transfer size width */
+		if (!atslave)
+			return -ENXIO;
+
+		if (dmaengine_cfg->direction == DMA_FROM_DEVICE)
+			sdma_width = dmaengine_cfg->src_addr_width;
+		else
+			sdma_width = dmaengine_cfg->dst_addr_width;
+
+		switch (sdma_width) {
+		case DMA_SLAVE_BUSWIDTH_1_BYTE:
+			atdma_width = AT_DMA_SLAVE_WIDTH_8BIT;
+			break;
+		case DMA_SLAVE_BUSWIDTH_2_BYTES:
+			atdma_width = AT_DMA_SLAVE_WIDTH_16BIT;
+			break;
+		case DMA_SLAVE_BUSWIDTH_4_BYTES:
+			atdma_width = AT_DMA_SLAVE_WIDTH_32BIT;
+			break;
+		default:
+			return -EINVAL;
+		}
+		atslave->reg_width = atdma_width;
 	} else if (cmd == DMA_TERMINATE_ALL) {
 		struct at_desc	*desc, *_desc;
 		/*