[38/47] xfs: create rmap update intent log items
diff mbox

Message ID 146907721624.25461.1280539951915485473.stgit@birch.djwong.org
State Accepted
Headers show

Commit Message

Darrick J. Wong July 21, 2016, 5 a.m. UTC
Create rmap update intent/done log items to record redo information in
the log.  Because we need to roll transactions between updating the
bmbt mapping and updating the reverse mapping, we also have to track
the status of the metadata updates that will be recorded in the
post-roll transactions, just in case we crash before committing the
final transaction.  This mechanism enables log recovery to finish what
was already started.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
---
 fs/xfs/Makefile                |    1 
 fs/xfs/libxfs/xfs_log_format.h |   64 +++++-
 fs/xfs/libxfs/xfs_rmap.h       |   19 ++
 fs/xfs/xfs_rmap_item.c         |  459 ++++++++++++++++++++++++++++++++++++++++
 fs/xfs/xfs_rmap_item.h         |  100 +++++++++
 fs/xfs/xfs_super.c             |   21 ++
 6 files changed, 662 insertions(+), 2 deletions(-)
 create mode 100644 fs/xfs/xfs_rmap_item.c
 create mode 100644 fs/xfs/xfs_rmap_item.h

Patch
diff mbox

diff --git a/fs/xfs/Makefile b/fs/xfs/Makefile
index b76e937..6c90393 100644
--- a/fs/xfs/Makefile
+++ b/fs/xfs/Makefile
@@ -103,6 +103,7 @@  xfs-y				+= xfs_log.o \
 				   xfs_extfree_item.o \
 				   xfs_icreate_item.o \
 				   xfs_inode_item.o \
+				   xfs_rmap_item.o \
 				   xfs_log_recover.o \
 				   xfs_trans_ail.o \
 				   xfs_trans_buf.o \
diff --git a/fs/xfs/libxfs/xfs_log_format.h b/fs/xfs/libxfs/xfs_log_format.h
index e8f49c0..a8d794d 100644
--- a/fs/xfs/libxfs/xfs_log_format.h
+++ b/fs/xfs/libxfs/xfs_log_format.h
@@ -110,7 +110,9 @@  static inline uint xlog_get_cycle(char *ptr)
 #define XLOG_REG_TYPE_COMMIT		18
 #define XLOG_REG_TYPE_TRANSHDR		19
 #define XLOG_REG_TYPE_ICREATE		20
-#define XLOG_REG_TYPE_MAX		20
+#define XLOG_REG_TYPE_RUI_FORMAT	21
+#define XLOG_REG_TYPE_RUD_FORMAT	22
+#define XLOG_REG_TYPE_MAX		22
 
 /*
  * Flags to log operation header
@@ -227,6 +229,8 @@  typedef struct xfs_trans_header {
 #define	XFS_LI_DQUOT		0x123d
 #define	XFS_LI_QUOTAOFF		0x123e
 #define	XFS_LI_ICREATE		0x123f
+#define	XFS_LI_RUI		0x1240	/* rmap update intent */
+#define	XFS_LI_RUD		0x1241
 
 #define XFS_LI_TYPE_DESC \
 	{ XFS_LI_EFI,		"XFS_LI_EFI" }, \
@@ -236,7 +240,9 @@  typedef struct xfs_trans_header {
 	{ XFS_LI_BUF,		"XFS_LI_BUF" }, \
 	{ XFS_LI_DQUOT,		"XFS_LI_DQUOT" }, \
 	{ XFS_LI_QUOTAOFF,	"XFS_LI_QUOTAOFF" }, \
-	{ XFS_LI_ICREATE,	"XFS_LI_ICREATE" }
+	{ XFS_LI_ICREATE,	"XFS_LI_ICREATE" }, \
+	{ XFS_LI_RUI,		"XFS_LI_RUI" }, \
+	{ XFS_LI_RUD,		"XFS_LI_RUD" }
 
 /*
  * Inode Log Item Format definitions.
@@ -604,6 +610,60 @@  typedef struct xfs_efd_log_format_64 {
 } xfs_efd_log_format_64_t;
 
 /*
+ * RUI/RUD (reverse mapping) log format definitions
+ */
+struct xfs_map_extent {
+	__uint64_t		me_owner;
+	__uint64_t		me_startblock;
+	__uint64_t		me_startoff;
+	__uint32_t		me_len;
+	__uint32_t		me_flags;
+};
+
+/* rmap me_flags: upper bits are flags, lower byte is type code */
+#define XFS_RMAP_EXTENT_MAP		1
+#define XFS_RMAP_EXTENT_UNMAP		3
+#define XFS_RMAP_EXTENT_CONVERT		5
+#define XFS_RMAP_EXTENT_ALLOC		7
+#define XFS_RMAP_EXTENT_FREE		8
+#define XFS_RMAP_EXTENT_TYPE_MASK	0xFF
+
+#define XFS_RMAP_EXTENT_ATTR_FORK	(1U << 31)
+#define XFS_RMAP_EXTENT_BMBT_BLOCK	(1U << 30)
+#define XFS_RMAP_EXTENT_UNWRITTEN	(1U << 29)
+
+#define XFS_RMAP_EXTENT_FLAGS		(XFS_RMAP_EXTENT_TYPE_MASK | \
+					 XFS_RMAP_EXTENT_ATTR_FORK | \
+					 XFS_RMAP_EXTENT_BMBT_BLOCK | \
+					 XFS_RMAP_EXTENT_UNWRITTEN)
+
+/*
+ * This is the structure used to lay out an rui log item in the
+ * log.  The rui_extents field is a variable size array whose
+ * size is given by rui_nextents.
+ */
+struct xfs_rui_log_format {
+	__uint16_t		rui_type;	/* rui log item type */
+	__uint16_t		rui_size;	/* size of this item */
+	__uint32_t		rui_nextents;	/* # extents to free */
+	__uint64_t		rui_id;		/* rui identifier */
+	struct xfs_map_extent	rui_extents[1];	/* array of extents to rmap */
+};
+
+/*
+ * This is the structure used to lay out an rud log item in the
+ * log.  The rud_extents array is a variable size array whose
+ * size is given by rud_nextents;
+ */
+struct xfs_rud_log_format {
+	__uint16_t		rud_type;	/* rud log item type */
+	__uint16_t		rud_size;	/* size of this item */
+	__uint32_t		rud_nextents;	/* # of extents freed */
+	__uint64_t		rud_rui_id;	/* id of corresponding rui */
+	struct xfs_map_extent	rud_extents[1];	/* array of extents rmapped */
+};
+
+/*
  * Dquot Log format definitions.
  *
  * The first two fields must be the type and size fitting into
diff --git a/fs/xfs/libxfs/xfs_rmap.h b/fs/xfs/libxfs/xfs_rmap.h
index 92ac067..c4b1133 100644
--- a/fs/xfs/libxfs/xfs_rmap.h
+++ b/fs/xfs/libxfs/xfs_rmap.h
@@ -163,4 +163,23 @@  int xfs_rmap_query_range(struct xfs_btree_cur *cur,
 		struct xfs_rmap_irec *low_rec, struct xfs_rmap_irec *high_rec,
 		xfs_rmap_query_range_fn fn, void *priv);
 
+enum xfs_rmap_intent_type {
+	XFS_RMAP_MAP,
+	XFS_RMAP_MAP_SHARED,
+	XFS_RMAP_UNMAP,
+	XFS_RMAP_UNMAP_SHARED,
+	XFS_RMAP_CONVERT,
+	XFS_RMAP_CONVERT_SHARED,
+	XFS_RMAP_ALLOC,
+	XFS_RMAP_FREE,
+};
+
+struct xfs_rmap_intent {
+	struct list_head			ri_list;
+	enum xfs_rmap_intent_type		ri_type;
+	__uint64_t				ri_owner;
+	int					ri_whichfork;
+	struct xfs_bmbt_irec			ri_bmap;
+};
+
 #endif	/* __XFS_RMAP_H__ */
diff --git a/fs/xfs/xfs_rmap_item.c b/fs/xfs/xfs_rmap_item.c
new file mode 100644
index 0000000..5398b84
--- /dev/null
+++ b/fs/xfs/xfs_rmap_item.c
@@ -0,0 +1,459 @@ 
+/*
+ * Copyright (C) 2016 Oracle.  All Rights Reserved.
+ *
+ * Author: Darrick J. Wong <darrick.wong@oracle.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it would be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write the Free Software Foundation,
+ * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+#include "xfs.h"
+#include "xfs_fs.h"
+#include "xfs_format.h"
+#include "xfs_log_format.h"
+#include "xfs_trans_resv.h"
+#include "xfs_mount.h"
+#include "xfs_trans.h"
+#include "xfs_trans_priv.h"
+#include "xfs_buf_item.h"
+#include "xfs_rmap_item.h"
+#include "xfs_log.h"
+
+
+kmem_zone_t	*xfs_rui_zone;
+kmem_zone_t	*xfs_rud_zone;
+
+static inline struct xfs_rui_log_item *RUI_ITEM(struct xfs_log_item *lip)
+{
+	return container_of(lip, struct xfs_rui_log_item, rui_item);
+}
+
+void
+xfs_rui_item_free(
+	struct xfs_rui_log_item	*ruip)
+{
+	if (ruip->rui_format.rui_nextents > XFS_RUI_MAX_FAST_EXTENTS)
+		kmem_free(ruip);
+	else
+		kmem_zone_free(xfs_rui_zone, ruip);
+}
+
+/*
+ * This returns the number of iovecs needed to log the given rui item.
+ * We only need 1 iovec for an rui item.  It just logs the rui_log_format
+ * structure.
+ */
+static inline int
+xfs_rui_item_sizeof(
+	struct xfs_rui_log_item *ruip)
+{
+	return sizeof(struct xfs_rui_log_format) +
+			(ruip->rui_format.rui_nextents - 1) *
+			sizeof(struct xfs_map_extent);
+}
+
+STATIC void
+xfs_rui_item_size(
+	struct xfs_log_item	*lip,
+	int			*nvecs,
+	int			*nbytes)
+{
+	*nvecs += 1;
+	*nbytes += xfs_rui_item_sizeof(RUI_ITEM(lip));
+}
+
+/*
+ * This is called to fill in the vector of log iovecs for the
+ * given rui log item. We use only 1 iovec, and we point that
+ * at the rui_log_format structure embedded in the rui item.
+ * It is at this point that we assert that all of the extent
+ * slots in the rui item have been filled.
+ */
+STATIC void
+xfs_rui_item_format(
+	struct xfs_log_item	*lip,
+	struct xfs_log_vec	*lv)
+{
+	struct xfs_rui_log_item	*ruip = RUI_ITEM(lip);
+	struct xfs_log_iovec	*vecp = NULL;
+
+	ASSERT(atomic_read(&ruip->rui_next_extent) ==
+			ruip->rui_format.rui_nextents);
+
+	ruip->rui_format.rui_type = XFS_LI_RUI;
+	ruip->rui_format.rui_size = 1;
+
+	xlog_copy_iovec(lv, &vecp, XLOG_REG_TYPE_RUI_FORMAT, &ruip->rui_format,
+			xfs_rui_item_sizeof(ruip));
+}
+
+/*
+ * Pinning has no meaning for an rui item, so just return.
+ */
+STATIC void
+xfs_rui_item_pin(
+	struct xfs_log_item	*lip)
+{
+}
+
+/*
+ * The unpin operation is the last place an RUI is manipulated in the log. It is
+ * either inserted in the AIL or aborted in the event of a log I/O error. In
+ * either case, the RUI transaction has been successfully committed to make it
+ * this far. Therefore, we expect whoever committed the RUI to either construct
+ * and commit the RUD or drop the RUD's reference in the event of error. Simply
+ * drop the log's RUI reference now that the log is done with it.
+ */
+STATIC void
+xfs_rui_item_unpin(
+	struct xfs_log_item	*lip,
+	int			remove)
+{
+	struct xfs_rui_log_item	*ruip = RUI_ITEM(lip);
+
+	xfs_rui_release(ruip);
+}
+
+/*
+ * RUI items have no locking or pushing.  However, since RUIs are pulled from
+ * the AIL when their corresponding RUDs are committed to disk, their situation
+ * is very similar to being pinned.  Return XFS_ITEM_PINNED so that the caller
+ * will eventually flush the log.  This should help in getting the RUI out of
+ * the AIL.
+ */
+STATIC uint
+xfs_rui_item_push(
+	struct xfs_log_item	*lip,
+	struct list_head	*buffer_list)
+{
+	return XFS_ITEM_PINNED;
+}
+
+/*
+ * The RUI has been either committed or aborted if the transaction has been
+ * cancelled. If the transaction was cancelled, an RUD isn't going to be
+ * constructed and thus we free the RUI here directly.
+ */
+STATIC void
+xfs_rui_item_unlock(
+	struct xfs_log_item	*lip)
+{
+	if (lip->li_flags & XFS_LI_ABORTED)
+		xfs_rui_item_free(RUI_ITEM(lip));
+}
+
+/*
+ * The RUI is logged only once and cannot be moved in the log, so simply return
+ * the lsn at which it's been logged.
+ */
+STATIC xfs_lsn_t
+xfs_rui_item_committed(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
+{
+	return lsn;
+}
+
+/*
+ * The RUI dependency tracking op doesn't do squat.  It can't because
+ * it doesn't know where the free extent is coming from.  The dependency
+ * tracking has to be handled by the "enclosing" metadata object.  For
+ * example, for inodes, the inode is locked throughout the extent freeing
+ * so the dependency should be recorded there.
+ */
+STATIC void
+xfs_rui_item_committing(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
+{
+}
+
+/*
+ * This is the ops vector shared by all rui log items.
+ */
+static const struct xfs_item_ops xfs_rui_item_ops = {
+	.iop_size	= xfs_rui_item_size,
+	.iop_format	= xfs_rui_item_format,
+	.iop_pin	= xfs_rui_item_pin,
+	.iop_unpin	= xfs_rui_item_unpin,
+	.iop_unlock	= xfs_rui_item_unlock,
+	.iop_committed	= xfs_rui_item_committed,
+	.iop_push	= xfs_rui_item_push,
+	.iop_committing = xfs_rui_item_committing,
+};
+
+/*
+ * Allocate and initialize an rui item with the given number of extents.
+ */
+struct xfs_rui_log_item *
+xfs_rui_init(
+	struct xfs_mount		*mp,
+	uint				nextents)
+
+{
+	struct xfs_rui_log_item		*ruip;
+	uint				size;
+
+	ASSERT(nextents > 0);
+	if (nextents > XFS_RUI_MAX_FAST_EXTENTS) {
+		size = (uint)(sizeof(struct xfs_rui_log_item) +
+			((nextents - 1) * sizeof(struct xfs_map_extent)));
+		ruip = kmem_zalloc(size, KM_SLEEP);
+	} else {
+		ruip = kmem_zone_zalloc(xfs_rui_zone, KM_SLEEP);
+	}
+
+	xfs_log_item_init(mp, &ruip->rui_item, XFS_LI_RUI, &xfs_rui_item_ops);
+	ruip->rui_format.rui_nextents = nextents;
+	ruip->rui_format.rui_id = (uintptr_t)(void *)ruip;
+	atomic_set(&ruip->rui_next_extent, 0);
+	atomic_set(&ruip->rui_refcount, 2);
+
+	return ruip;
+}
+
+/*
+ * Copy an RUI format buffer from the given buf, and into the destination
+ * RUI format structure.  The RUI/RUD items were designed not to need any
+ * special alignment handling.
+ */
+int
+xfs_rui_copy_format(
+	struct xfs_log_iovec		*buf,
+	struct xfs_rui_log_format	*dst_rui_fmt)
+{
+	struct xfs_rui_log_format	*src_rui_fmt;
+	uint				len;
+
+	src_rui_fmt = buf->i_addr;
+	len = sizeof(struct xfs_rui_log_format) +
+			(src_rui_fmt->rui_nextents - 1) *
+			sizeof(struct xfs_map_extent);
+
+	if (buf->i_len != len)
+		return -EFSCORRUPTED;
+
+	memcpy((char *)dst_rui_fmt, (char *)src_rui_fmt, len);
+	return 0;
+}
+
+/*
+ * Freeing the RUI requires that we remove it from the AIL if it has already
+ * been placed there. However, the RUI may not yet have been placed in the AIL
+ * when called by xfs_rui_release() from RUD processing due to the ordering of
+ * committed vs unpin operations in bulk insert operations. Hence the reference
+ * count to ensure only the last caller frees the RUI.
+ */
+void
+xfs_rui_release(
+	struct xfs_rui_log_item	*ruip)
+{
+	if (atomic_dec_and_test(&ruip->rui_refcount)) {
+		xfs_trans_ail_remove(&ruip->rui_item, SHUTDOWN_LOG_IO_ERROR);
+		xfs_rui_item_free(ruip);
+	}
+}
+
+static inline struct xfs_rud_log_item *RUD_ITEM(struct xfs_log_item *lip)
+{
+	return container_of(lip, struct xfs_rud_log_item, rud_item);
+}
+
+STATIC void
+xfs_rud_item_free(struct xfs_rud_log_item *rudp)
+{
+	if (rudp->rud_format.rud_nextents > XFS_RUD_MAX_FAST_EXTENTS)
+		kmem_free(rudp);
+	else
+		kmem_zone_free(xfs_rud_zone, rudp);
+}
+
+/*
+ * This returns the number of iovecs needed to log the given rud item.
+ * We only need 1 iovec for an rud item.  It just logs the rud_log_format
+ * structure.
+ */
+static inline int
+xfs_rud_item_sizeof(
+	struct xfs_rud_log_item	*rudp)
+{
+	return sizeof(struct xfs_rud_log_format) +
+			(rudp->rud_format.rud_nextents - 1) *
+			sizeof(struct xfs_map_extent);
+}
+
+STATIC void
+xfs_rud_item_size(
+	struct xfs_log_item	*lip,
+	int			*nvecs,
+	int			*nbytes)
+{
+	*nvecs += 1;
+	*nbytes += xfs_rud_item_sizeof(RUD_ITEM(lip));
+}
+
+/*
+ * This is called to fill in the vector of log iovecs for the
+ * given rud log item. We use only 1 iovec, and we point that
+ * at the rud_log_format structure embedded in the rud item.
+ * It is at this point that we assert that all of the extent
+ * slots in the rud item have been filled.
+ */
+STATIC void
+xfs_rud_item_format(
+	struct xfs_log_item	*lip,
+	struct xfs_log_vec	*lv)
+{
+	struct xfs_rud_log_item	*rudp = RUD_ITEM(lip);
+	struct xfs_log_iovec	*vecp = NULL;
+
+	ASSERT(rudp->rud_next_extent == rudp->rud_format.rud_nextents);
+
+	rudp->rud_format.rud_type = XFS_LI_RUD;
+	rudp->rud_format.rud_size = 1;
+
+	xlog_copy_iovec(lv, &vecp, XLOG_REG_TYPE_RUD_FORMAT, &rudp->rud_format,
+			xfs_rud_item_sizeof(rudp));
+}
+
+/*
+ * Pinning has no meaning for an rud item, so just return.
+ */
+STATIC void
+xfs_rud_item_pin(
+	struct xfs_log_item	*lip)
+{
+}
+
+/*
+ * Since pinning has no meaning for an rud item, unpinning does
+ * not either.
+ */
+STATIC void
+xfs_rud_item_unpin(
+	struct xfs_log_item	*lip,
+	int			remove)
+{
+}
+
+/*
+ * There isn't much you can do to push on an rud item.  It is simply stuck
+ * waiting for the log to be flushed to disk.
+ */
+STATIC uint
+xfs_rud_item_push(
+	struct xfs_log_item	*lip,
+	struct list_head	*buffer_list)
+{
+	return XFS_ITEM_PINNED;
+}
+
+/*
+ * The RUD is either committed or aborted if the transaction is cancelled. If
+ * the transaction is cancelled, drop our reference to the RUI and free the
+ * RUD.
+ */
+STATIC void
+xfs_rud_item_unlock(
+	struct xfs_log_item	*lip)
+{
+	struct xfs_rud_log_item	*rudp = RUD_ITEM(lip);
+
+	if (lip->li_flags & XFS_LI_ABORTED) {
+		xfs_rui_release(rudp->rud_ruip);
+		xfs_rud_item_free(rudp);
+	}
+}
+
+/*
+ * When the rud item is committed to disk, all we need to do is delete our
+ * reference to our partner rui item and then free ourselves. Since we're
+ * freeing ourselves we must return -1 to keep the transaction code from
+ * further referencing this item.
+ */
+STATIC xfs_lsn_t
+xfs_rud_item_committed(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
+{
+	struct xfs_rud_log_item	*rudp = RUD_ITEM(lip);
+
+	/*
+	 * Drop the RUI reference regardless of whether the RUD has been
+	 * aborted. Once the RUD transaction is constructed, it is the sole
+	 * responsibility of the RUD to release the RUI (even if the RUI is
+	 * aborted due to log I/O error).
+	 */
+	xfs_rui_release(rudp->rud_ruip);
+	xfs_rud_item_free(rudp);
+
+	return (xfs_lsn_t)-1;
+}
+
+/*
+ * The RUD dependency tracking op doesn't do squat.  It can't because
+ * it doesn't know where the free extent is coming from.  The dependency
+ * tracking has to be handled by the "enclosing" metadata object.  For
+ * example, for inodes, the inode is locked throughout the extent freeing
+ * so the dependency should be recorded there.
+ */
+STATIC void
+xfs_rud_item_committing(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
+{
+}
+
+/*
+ * This is the ops vector shared by all rud log items.
+ */
+static const struct xfs_item_ops xfs_rud_item_ops = {
+	.iop_size	= xfs_rud_item_size,
+	.iop_format	= xfs_rud_item_format,
+	.iop_pin	= xfs_rud_item_pin,
+	.iop_unpin	= xfs_rud_item_unpin,
+	.iop_unlock	= xfs_rud_item_unlock,
+	.iop_committed	= xfs_rud_item_committed,
+	.iop_push	= xfs_rud_item_push,
+	.iop_committing = xfs_rud_item_committing,
+};
+
+/*
+ * Allocate and initialize an rud item with the given number of extents.
+ */
+struct xfs_rud_log_item *
+xfs_rud_init(
+	struct xfs_mount		*mp,
+	struct xfs_rui_log_item		*ruip,
+	uint				nextents)
+
+{
+	struct xfs_rud_log_item	*rudp;
+	uint			size;
+
+	ASSERT(nextents > 0);
+	if (nextents > XFS_RUD_MAX_FAST_EXTENTS) {
+		size = (uint)(sizeof(struct xfs_rud_log_item) +
+			((nextents - 1) * sizeof(struct xfs_map_extent)));
+		rudp = kmem_zalloc(size, KM_SLEEP);
+	} else {
+		rudp = kmem_zone_zalloc(xfs_rud_zone, KM_SLEEP);
+	}
+
+	xfs_log_item_init(mp, &rudp->rud_item, XFS_LI_RUD, &xfs_rud_item_ops);
+	rudp->rud_ruip = ruip;
+	rudp->rud_format.rud_nextents = nextents;
+	rudp->rud_format.rud_rui_id = ruip->rui_format.rui_id;
+
+	return rudp;
+}
diff --git a/fs/xfs/xfs_rmap_item.h b/fs/xfs/xfs_rmap_item.h
new file mode 100644
index 0000000..bd36ab5
--- /dev/null
+++ b/fs/xfs/xfs_rmap_item.h
@@ -0,0 +1,100 @@ 
+/*
+ * Copyright (C) 2016 Oracle.  All Rights Reserved.
+ *
+ * Author: Darrick J. Wong <darrick.wong@oracle.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it would be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write the Free Software Foundation,
+ * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+#ifndef	__XFS_RMAP_ITEM_H__
+#define	__XFS_RMAP_ITEM_H__
+
+/*
+ * There are (currently) three pairs of rmap btree redo item types: map, unmap,
+ * and convert.  The common abbreviations for these are RUI (rmap update
+ * intent) and RUD (rmap update done).  The redo item type is encoded in the
+ * flags field of each xfs_map_extent.
+ *
+ * *I items should be recorded in the *first* of a series of rolled
+ * transactions, and the *D items should be recorded in the same transaction
+ * that records the associated rmapbt updates.  Typically, the first
+ * transaction will record a bmbt update, followed by some number of
+ * transactions containing rmapbt updates, and finally transactions with any
+ * bnobt/cntbt updates.
+ *
+ * Should the system crash after the commit of the first transaction but
+ * before the commit of the final transaction in a series, log recovery will
+ * use the redo information recorded by the intent items to replay the
+ * (rmapbt/bnobt/cntbt) metadata updates in the non-first transaction.
+ */
+
+/* kernel only RUI/RUD definitions */
+
+struct xfs_mount;
+struct kmem_zone;
+
+/*
+ * Max number of extents in fast allocation path.
+ */
+#define	XFS_RUI_MAX_FAST_EXTENTS	16
+
+/*
+ * Define RUI flag bits. Manipulated by set/clear/test_bit operators.
+ */
+#define	XFS_RUI_RECOVERED		1
+
+/*
+ * This is the "rmap update intent" log item.  It is used to log the fact that
+ * some reverse mappings need to change.  It is used in conjunction with the
+ * "rmap update done" log item described below.
+ *
+ * These log items follow the same rules as struct xfs_efi_log_item; see the
+ * comments about that structure (in xfs_extfree_item.h) for more details.
+ */
+struct xfs_rui_log_item {
+	struct xfs_log_item		rui_item;
+	atomic_t			rui_refcount;
+	atomic_t			rui_next_extent;
+	unsigned long			rui_flags;	/* misc flags */
+	struct xfs_rui_log_format	rui_format;
+};
+
+/*
+ * This is the "rmap update done" log item.  It is used to log the fact that
+ * some rmapbt updates mentioned in an earlier rui item have been performed.
+ */
+struct xfs_rud_log_item {
+	struct xfs_log_item		rud_item;
+	struct xfs_rui_log_item		*rud_ruip;
+	uint				rud_next_extent;
+	struct xfs_rud_log_format	rud_format;
+};
+
+/*
+ * Max number of extents in fast allocation path.
+ */
+#define	XFS_RUD_MAX_FAST_EXTENTS	16
+
+extern struct kmem_zone	*xfs_rui_zone;
+extern struct kmem_zone	*xfs_rud_zone;
+
+struct xfs_rui_log_item *xfs_rui_init(struct xfs_mount *, uint);
+struct xfs_rud_log_item *xfs_rud_init(struct xfs_mount *,
+		struct xfs_rui_log_item *, uint);
+int xfs_rui_copy_format(struct xfs_log_iovec *buf,
+		struct xfs_rui_log_format *dst_rui_fmt);
+void xfs_rui_item_free(struct xfs_rui_log_item *);
+void xfs_rui_release(struct xfs_rui_log_item *);
+
+#endif	/* __XFS_RMAP_ITEM_H__ */
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index 0f51e1d..5c28072 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -46,6 +46,7 @@ 
 #include "xfs_quota.h"
 #include "xfs_sysfs.h"
 #include "xfs_ondisk.h"
+#include "xfs_rmap_item.h"
 
 #include <linux/namei.h>
 #include <linux/init.h>
@@ -1769,8 +1770,26 @@  xfs_init_zones(void)
 	if (!xfs_icreate_zone)
 		goto out_destroy_ili_zone;
 
+	xfs_rud_zone = kmem_zone_init((sizeof(struct xfs_rud_log_item) +
+			((XFS_RUD_MAX_FAST_EXTENTS - 1) *
+				 sizeof(struct xfs_map_extent))),
+			"xfs_rud_item");
+	if (!xfs_rud_zone)
+		goto out_destroy_icreate_zone;
+
+	xfs_rui_zone = kmem_zone_init((sizeof(struct xfs_rui_log_item) +
+			((XFS_RUI_MAX_FAST_EXTENTS - 1) *
+				sizeof(struct xfs_map_extent))),
+			"xfs_rui_item");
+	if (!xfs_rui_zone)
+		goto out_destroy_rud_zone;
+
 	return 0;
 
+ out_destroy_rud_zone:
+	kmem_zone_destroy(xfs_rud_zone);
+ out_destroy_icreate_zone:
+	kmem_zone_destroy(xfs_icreate_zone);
  out_destroy_ili_zone:
 	kmem_zone_destroy(xfs_ili_zone);
  out_destroy_inode_zone:
@@ -1809,6 +1828,8 @@  xfs_destroy_zones(void)
 	 * destroy caches.
 	 */
 	rcu_barrier();
+	kmem_zone_destroy(xfs_rui_zone);
+	kmem_zone_destroy(xfs_rud_zone);
 	kmem_zone_destroy(xfs_icreate_zone);
 	kmem_zone_destroy(xfs_ili_zone);
 	kmem_zone_destroy(xfs_inode_zone);