diff mbox

[1/2] ASoC: sunxi: Add bindings for sun6i to SPDIF

Message ID 20160730142716.29377-2-codekipper@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Code Kipper July 30, 2016, 2:27 p.m. UTC
From: Marcus Cooper <codekipper@gmail.com>

The A31 SoC uses the same SPDIF block as found in earlier SoCs, but its
reset is controlled via a separate reset controller.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 3 +++
 1 file changed, 3 insertions(+)

Comments

Maxime Ripard July 30, 2016, 3:17 p.m. UTC | #1
On Sat, Jul 30, 2016 at 04:27:15PM +0200, codekipper@gmail.com wrote:
> From: Marcus Cooper <codekipper@gmail.com>
> 
> The A31 SoC uses the same SPDIF block as found in earlier SoCs, but its
> reset is controlled via a separate reset controller.
> 
> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> ---
>  Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
> index 13503aa..4fe80f7 100644
> --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
> +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
> @@ -9,6 +9,7 @@ Required properties:
>  
>    - compatible		: should be one of the following:
>      - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
> +    - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
>  
>    - reg			: Offset and length of the register set for the device.
>  
> @@ -25,6 +26,8 @@ Required properties:
>  	"apb"		  clock for the spdif bus.
>  	"spdif"		  clock for spdif controller.
>  
> +  - reset		: reset specifier for the ahb reset (A31 and newer only)

Isn't it resets ? (plural)

Thanks,
Maxime
Code Kipper July 30, 2016, 3:34 p.m. UTC | #2
On 30 July 2016 at 17:17, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> On Sat, Jul 30, 2016 at 04:27:15PM +0200, codekipper@gmail.com wrote:
>> From: Marcus Cooper <codekipper@gmail.com>
>>
>> The A31 SoC uses the same SPDIF block as found in earlier SoCs, but its
>> reset is controlled via a separate reset controller.
>>
>> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
>> ---
>>  Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 3 +++
>>  1 file changed, 3 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
>> index 13503aa..4fe80f7 100644
>> --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
>> +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
>> @@ -9,6 +9,7 @@ Required properties:
>>
>>    - compatible               : should be one of the following:
>>      - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
>> +    - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
>>
>>    - reg                      : Offset and length of the register set for the device.
>>
>> @@ -25,6 +26,8 @@ Required properties:
>>       "apb"             clock for the spdif bus.
>>       "spdif"           clock for spdif controller.
>>
>> +  - reset            : reset specifier for the ahb reset (A31 and newer only)
>
> Isn't it resets ? (plural)

Dohh..yes it is. Do you want me to send an updated patch series, a
single patch change or could I beg for your commit massaging?
Thanks,
CK
>
> Thanks,
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
Maxime Ripard July 30, 2016, 3:40 p.m. UTC | #3
On Sat, Jul 30, 2016 at 05:34:11PM +0200, Code Kipper wrote:
> On 30 July 2016 at 17:17, Maxime Ripard
> <maxime.ripard@free-electrons.com> wrote:
> > On Sat, Jul 30, 2016 at 04:27:15PM +0200, codekipper@gmail.com wrote:
> >> From: Marcus Cooper <codekipper@gmail.com>
> >>
> >> The A31 SoC uses the same SPDIF block as found in earlier SoCs, but its
> >> reset is controlled via a separate reset controller.
> >>
> >> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> >> ---
> >>  Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 3 +++
> >>  1 file changed, 3 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
> >> index 13503aa..4fe80f7 100644
> >> --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
> >> +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
> >> @@ -9,6 +9,7 @@ Required properties:
> >>
> >>    - compatible               : should be one of the following:
> >>      - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
> >> +    - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
> >>
> >>    - reg                      : Offset and length of the register set for the device.
> >>
> >> @@ -25,6 +26,8 @@ Required properties:
> >>       "apb"             clock for the spdif bus.
> >>       "spdif"           clock for spdif controller.
> >>
> >> +  - reset            : reset specifier for the ahb reset (A31 and newer only)
> >
> > Isn't it resets ? (plural)
> 
> Dohh..yes it is. Do you want me to send an updated patch series, a
> single patch change or could I beg for your commit massaging?

I'm not the one who is going to apply that patch, so I don't know :)

Maxime
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index 13503aa..4fe80f7 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -9,6 +9,7 @@  Required properties:
 
   - compatible		: should be one of the following:
     - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
+    - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
 
   - reg			: Offset and length of the register set for the device.
 
@@ -25,6 +26,8 @@  Required properties:
 	"apb"		  clock for the spdif bus.
 	"spdif"		  clock for spdif controller.
 
+  - reset		: reset specifier for the ahb reset (A31 and newer only)
+
 Example:
 
 spdif: spdif@01c21000 {