@@ -55,6 +55,9 @@ may be done automatically by your distribution.
Driver options
~~~~~~~~~~~~~~
+.. tabularcolumns:: |p{13ex}|L|
+
+
============== ========================================================
Option Description
============== ========================================================
@@ -31,31 +31,33 @@ The drivers exposes following files:
information. The contents of the file is binary data of the
following layout:
+ .. tabularcolumns:: |p{7ex}|p{12ex}|L|
+
============= ============== ====================================
- Offset Name Description
+ Offset Name Description
============= ============== ====================================
- 0x00 blend_int Flag, set when stereo separation has
+ 0x00 blend_int Flag, set when stereo separation has
crossed below the blend threshold
- 0x01 hblend_int Flag, set when HiBlend cutoff
+ 0x01 hblend_int Flag, set when HiBlend cutoff
frequency is lower than threshold
- 0x02 hicut_int Flag, set when HiCut cutoff
+ 0x02 hicut_int Flag, set when HiCut cutoff
frequency is lower than threshold
- 0x03 chbw_int Flag, set when channel filter
+ 0x03 chbw_int Flag, set when channel filter
bandwidth is less than threshold
- 0x04 softmute_int Flag indicating that softmute
+ 0x04 softmute_int Flag indicating that softmute
attenuation has increased above
softmute threshold
0x05 smute 0 - Audio is not soft muted
1 - Audio is soft muted
- 0x06 smattn Soft mute attenuation level in dB
- 0x07 chbw Channel filter bandwidth in kHz
- 0x08 hicut HiCut cutoff frequency in units of
+ 0x06 smattn Soft mute attenuation level in dB
+ 0x07 chbw Channel filter bandwidth in kHz
+ 0x08 hicut HiCut cutoff frequency in units of
100Hz
- 0x09 hiblend HiBlend cutoff frequency in units
+ 0x09 hiblend HiBlend cutoff frequency in units
of 100 Hz
- 0x10 pilot 0 - Stereo pilot is not present
+ 0x10 pilot 0 - Stereo pilot is not present
1 - Stereo pilot is present
- 0x11 stblend Stereo blend in %
+ 0x11 stblend Stereo blend in %
============= ============== ====================================
@@ -63,12 +65,14 @@ The drivers exposes following files:
This file contains statistics about RDS receptions. It's binary data
has the following layout:
+ .. tabularcolumns:: |p{7ex}|p{12ex}|L|
+
============= ============== ====================================
- Offset Name Description
+ Offset Name Description
============= ============== ====================================
- 0x00 expected Number of expected RDS blocks
- 0x02 received Number of received RDS blocks
- 0x04 uncorrectable Number of uncorrectable RDS blocks
+ 0x00 expected Number of expected RDS blocks
+ 0x02 received Number of received RDS blocks
+ 0x04 uncorrectable Number of uncorrectable RDS blocks
============= ============== ====================================
* /sys/kernel/debug/<device-name>/agc
@@ -77,21 +81,23 @@ The drivers exposes following files:
The layout is:
+ .. tabularcolumns:: |p{7ex}|p{12ex}|L|
+
============= ============== ====================================
- Offset Name Description
+ Offset Name Description
============= ============== ====================================
- 0x00 mxhi 0 - FM Mixer PD high threshold is
+ 0x00 mxhi 0 - FM Mixer PD high threshold is
not tripped
1 - FM Mixer PD high threshold is
tripped
- 0x01 mxlo ditto for FM Mixer PD low
- 0x02 lnahi ditto for FM LNA PD high
- 0x03 lnalo ditto for FM LNA PD low
- 0x04 fmagc1 FMAGC1 attenuator resistance
+ 0x01 mxlo ditto for FM Mixer PD low
+ 0x02 lnahi ditto for FM LNA PD high
+ 0x03 lnalo ditto for FM LNA PD low
+ 0x04 fmagc1 FMAGC1 attenuator resistance
(see datasheet for more detail)
- 0x05 fmagc2 ditto for FMAGC2
- 0x06 pgagain PGA gain in dB
- 0x07 fmwblang FM/WB LNA Gain in dB
+ 0x05 fmagc2 ditto for FMAGC2
+ 0x06 pgagain PGA gain in dB
+ 0x07 fmwblang FM/WB LNA Gain in dB
============= ============== ====================================
* /sys/kernel/debug/<device-name>/rsq
@@ -100,48 +106,50 @@ The drivers exposes following files:
The layout is:
+ .. tabularcolumns:: |p{7ex}|p{12ex}|p{60ex}|
+
============= ============== ====================================
- Offset Name Description
+ Offset Name Description
============= ============== ====================================
- 0x00 multhint 0 - multipath value has not crossed
+ 0x00 multhint 0 - multipath value has not crossed
the Multipath high threshold
1 - multipath value has crossed
the Multipath high threshold
- 0x01 multlint ditto for Multipath low threshold
- 0x02 snrhint 0 - received signal's SNR has not
+ 0x01 multlint ditto for Multipath low threshold
+ 0x02 snrhint 0 - received signal's SNR has not
crossed high threshold
1 - received signal's SNR has
crossed high threshold
- 0x03 snrlint ditto for low threshold
- 0x04 rssihint ditto for RSSI high threshold
- 0x05 rssilint ditto for RSSI low threshold
- 0x06 bltf Flag indicating if seek command
+ 0x03 snrlint ditto for low threshold
+ 0x04 rssihint ditto for RSSI high threshold
+ 0x05 rssilint ditto for RSSI low threshold
+ 0x06 bltf Flag indicating if seek command
reached/wrapped seek band limit
- 0x07 snr_ready Indicates that SNR metrics is ready
- 0x08 rssiready ditto for RSSI metrics
- 0x09 injside 0 - Low-side injection is being used
+ 0x07 snr_ready Indicates that SNR metrics is ready
+ 0x08 rssiready ditto for RSSI metrics
+ 0x09 injside 0 - Low-side injection is being used
1 - High-side injection is used
- 0x10 afcrl Flag indicating if AFC rails
- 0x11 valid Flag indicating if channel is valid
- 0x12 readfreq Current tuned frequency
- 0x14 freqoff Signed frequency offset in units of
+ 0x10 afcrl Flag indicating if AFC rails
+ 0x11 valid Flag indicating if channel is valid
+ 0x12 readfreq Current tuned frequency
+ 0x14 freqoff Signed frequency offset in units of
2ppm
- 0x15 rssi Signed value of RSSI in dBuV
- 0x16 snr Signed RF SNR in dB
- 0x17 issi Signed Image Strength Signal
+ 0x15 rssi Signed value of RSSI in dBuV
+ 0x16 snr Signed RF SNR in dB
+ 0x17 issi Signed Image Strength Signal
indicator
- 0x18 lassi Signed Low side adjacent Channel
+ 0x18 lassi Signed Low side adjacent Channel
Strength indicator
- 0x19 hassi ditto fpr High side
- 0x20 mult Multipath indicator
- 0x21 dev Frequency deviation
- 0x24 assi Adjacent channel SSI
- 0x25 usn Ultrasonic noise indicator
- 0x26 pilotdev Pilot deviation in units of 100 Hz
- 0x27 rdsdev ditto for RDS
- 0x28 assidev ditto for ASSI
- 0x29 strongdev Frequency deviation
- 0x30 rdspi RDS PI code
+ 0x19 hassi ditto fpr High side
+ 0x20 mult Multipath indicator
+ 0x21 dev Frequency deviation
+ 0x24 assi Adjacent channel SSI
+ 0x25 usn Ultrasonic noise indicator
+ 0x26 pilotdev Pilot deviation in units of 100 Hz
+ 0x27 rdsdev ditto for RDS
+ 0x28 assidev ditto for ASSI
+ 0x29 strongdev Frequency deviation
+ 0x30 rdspi RDS PI code
============= ============== ====================================
* /sys/kernel/debug/<device-name>/rsq_primary
A few tables are not properly output on LaTeX format. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> --- Documentation/media/v4l-drivers/cpia2.rst | 3 + Documentation/media/v4l-drivers/si476x.rst | 116 +++++++++++++++-------------- 2 files changed, 65 insertions(+), 54 deletions(-)