| Message ID | 1472108238-24309-4-git-send-email-cw00.choi@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Thu, Aug 25, 2016 at 03:57:18PM +0900, Chanwoo Choi wrote: > This patch sets the clock rate for DREX (DRAM Express) block > on exynos5422-odroidxu3 board. In the exynos5422 TRM, > DRAM clocks use BPLL clock and CMU_CDREX generates > the 800MHz DRAM clock. > From the commit message I don't get two things: 1. Why setting this on XU3-family of boards, not all 542x/5800? 2. Why this is needed? The commit msg lacks the answer to the "why". > [clk_summary on exynos5422-odroidxu3 board] > fout_bpll 0 0 800000000 0 0 > mout_bpll 0 0 800000000 0 0 > mout_mclk_cdrex 0 0 800000000 0 0 > dout_pclk_core_mem 0 0 200000000 0 0 > dout_sclk_cdrex 0 0 800000000 0 0 > What is the purpose of this dump of clk_summary? Is it a state before or after the change? After it is quite obvious that it should have 800MHz... Best regards, Krzysztof > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > --- > arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > index d56253049ccb..fd3f67c72039 100644 > --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > @@ -229,6 +229,11 @@ > status = "okay"; > }; > > +&clock { > + assigned-clocks = <&clock CLK_DOUT_SCLK_CDREX>; > + assigned-clock-rates = <800000000>; > +}; > + > &clock_audss { > assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, > <&clock_audss EXYNOS_MOUT_I2S>, > -- > 1.9.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2016년 08월 28일 01:33, Krzysztof Kozlowski wrote: > On Thu, Aug 25, 2016 at 03:57:18PM +0900, Chanwoo Choi wrote: >> This patch sets the clock rate for DREX (DRAM Express) block >> on exynos5422-odroidxu3 board. In the exynos5422 TRM, >> DRAM clocks use BPLL clock and CMU_CDREX generates >> the 800MHz DRAM clock. >> > >>From the commit message I don't get two things: > 1. Why setting this on XU3-family of boards, not all 542x/5800? I have the only xu3 board. I cannot test it on other boards. > 2. Why this is needed? The commit msg lacks the answer to the "why". In the exynos5422's TRM, CMU_CDREX generates the 800MHz DRAM clock as above commit message. But, I'm missing what there is different before applying this patch. I add comment why we should set the clock rate for DRAM on below. > >> [clk_summary on exynos5422-odroidxu3 board] >> fout_bpll 0 0 800000000 0 0 >> mout_bpll 0 0 800000000 0 0 >> mout_mclk_cdrex 0 0 800000000 0 0 >> dout_pclk_core_mem 0 0 200000000 0 0 >> dout_sclk_cdrex 0 0 800000000 0 0 >> > > What is the purpose of this dump of clk_summary? Is it a state before or > after the change? After it is quite obvious that it should have > 800MHz... I'm missing the difference before applying this patch. As I mentioned on v1[1] patch, if I don't set the clock rate for CDREX, the default clock is 825MHz instead of 800MHz. So, I set the clock rate on this patch. [1] https://lkml.org/lkml/2016/8/22/255 If I don't apply this patch, the DREX clock is 825MHz. fout_bpll 0 0 825000000 0 0 mout_bpll 0 0 825000000 0 0 mout_mclk_cdrex 0 0 825000000 0 0 dout_pclk_core_mem 0 0 206250000 0 0 dout_sclk_cdrex 0 0 825000000 0 0 dout_clk2x_phy0 0 0 825000000 0 0 dout_aclk_cdrex1 0 0 412500000 0 0 dout_pclk_cdrex 0 0 103125000 0 0 dout_cclk_drex0 0 0 412500000 0 0 If you want to edit the commit message, I'll resend the v3 patch. Best Regards, Chanwoo Choi > > Best regards, > Krzysztof > >> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >> --- >> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 5 +++++ >> 1 file changed, 5 insertions(+) >> >> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi >> index d56253049ccb..fd3f67c72039 100644 >> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi >> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi >> @@ -229,6 +229,11 @@ >> status = "okay"; >> }; >> >> +&clock { >> + assigned-clocks = <&clock CLK_DOUT_SCLK_CDREX>; >> + assigned-clock-rates = <800000000>; >> +}; >> + >> &clock_audss { >> assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, >> <&clock_audss EXYNOS_MOUT_I2S>, >> -- >> 1.9.1 >> >> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index d56253049ccb..fd3f67c72039 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -229,6 +229,11 @@ status = "okay"; }; +&clock { + assigned-clocks = <&clock CLK_DOUT_SCLK_CDREX>; + assigned-clock-rates = <800000000>; +}; + &clock_audss { assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, <&clock_audss EXYNOS_MOUT_I2S>,
This patch sets the clock rate for DREX (DRAM Express) block on exynos5422-odroidxu3 board. In the exynos5422 TRM, DRAM clocks use BPLL clock and CMU_CDREX generates the 800MHz DRAM clock. [clk_summary on exynos5422-odroidxu3 board] fout_bpll 0 0 800000000 0 0 mout_bpll 0 0 800000000 0 0 mout_mclk_cdrex 0 0 800000000 0 0 dout_pclk_core_mem 0 0 200000000 0 0 dout_sclk_cdrex 0 0 800000000 0 0 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> --- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 5 +++++ 1 file changed, 5 insertions(+)