| Message ID | 1472640730-24326-2-git-send-email-architt@codeaurora.org (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On Wed, Aug 31, 2016 at 04:22:08PM +0530, Archit Taneja wrote: > Add the regulator supply properties needed for ADV7533. The regulator > names are named after the pin names. The exact use of each supply isn't > clear from the data sheets. > > The regulators are specified as optional properties since there can > be boards which have a fixed supply directly routed to the pins, and > these may not be modelled as regulator supplies. > > There might be a similar set of regulators for ADV7511, but we don't > have the docs at the moment to find out what supplies it needs. The > regulator properties needed by ADV7511 can be updated as we get more > data on it. The ADV7510 is available and there's a pinout comparison with the 7511: http://www.analog.com/media/en/technical-documentation/evaluation-documentation/ADV7510_to_ADV7511_differences.pdf These 2 seem to have the same supplies... > > Cc: Rob Herring <robh@kernel.org> > Cc: devicetree@vger.kernel.org > Signed-off-by: Archit Taneja <architt@codeaurora.org> > --- > Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt > index 6532a59..669b6f2 100644 > --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt > +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt > @@ -56,6 +56,12 @@ Optional properties: > - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing > generator. The chip will rely on the sync signals in the DSI data lanes, > rather than generate its own timings for HDMI output. > +- avdd-supply: Only for ADV7533. A 1.8V supply that powers up the AVDD, DVDD > + PVDD and A2VDD pins on the chip. This sounds wrong. Each input to the chip should be a property even if they are typically from the same supply. The 7511 has DVDD, AVDD, and PVDD. > +- v1p2-supply: Only for ADV7533. A supply that powers up the V1P2 pin on the > + chip. Can be either 1.2V or 1.8V. This appears to be 7533 specific. > +- v3p3-supply: Only for ADV7533. A 3.3V supply that powers up the V3P3 pin on > + the chip. DVDD_3V on 7511 7510/7511 also have BGVDD (for Bandgap). Not clear what the voltage is. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 09/02/2016 09:26 PM, Rob Herring wrote: > On Wed, Aug 31, 2016 at 04:22:08PM +0530, Archit Taneja wrote: >> Add the regulator supply properties needed for ADV7533. The regulator >> names are named after the pin names. The exact use of each supply isn't >> clear from the data sheets. >> >> The regulators are specified as optional properties since there can >> be boards which have a fixed supply directly routed to the pins, and >> these may not be modelled as regulator supplies. >> >> There might be a similar set of regulators for ADV7511, but we don't >> have the docs at the moment to find out what supplies it needs. The >> regulator properties needed by ADV7511 can be updated as we get more >> data on it. > > The ADV7510 is available and there's a pinout comparison with the 7511: > > http://www.analog.com/media/en/technical-documentation/evaluation-documentation/ADV7510_to_ADV7511_differences.pdf > > These 2 seem to have the same supplies... Thanks. I'll use this. > >> >> Cc: Rob Herring <robh@kernel.org> >> Cc: devicetree@vger.kernel.org >> Signed-off-by: Archit Taneja <architt@codeaurora.org> >> --- >> Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 6 ++++++ >> 1 file changed, 6 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt >> index 6532a59..669b6f2 100644 >> --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt >> +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt >> @@ -56,6 +56,12 @@ Optional properties: >> - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing >> generator. The chip will rely on the sync signals in the DSI data lanes, >> rather than generate its own timings for HDMI output. >> +- avdd-supply: Only for ADV7533. A 1.8V supply that powers up the AVDD, DVDD >> + PVDD and A2VDD pins on the chip. > > This sounds wrong. Each input to the chip should be a property even if > they are typically from the same supply. I'll create an entry for each. > > The 7511 has DVDD, AVDD, and PVDD. > >> +- v1p2-supply: Only for ADV7533. A supply that powers up the V1P2 pin on the >> + chip. Can be either 1.2V or 1.8V. > > This appears to be 7533 specific. > >> +- v3p3-supply: Only for ADV7533. A 3.3V supply that powers up the V3P3 pin on >> + the chip. > > DVDD_3V on 7511 > > 7510/7511 also have BGVDD (for Bandgap). Not clear what the voltage is. I'll add this regulator, and mention that we don't know what the voltage is. > > Rob >
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 6532a59..669b6f2 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -56,6 +56,12 @@ Optional properties: - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing generator. The chip will rely on the sync signals in the DSI data lanes, rather than generate its own timings for HDMI output. +- avdd-supply: Only for ADV7533. A 1.8V supply that powers up the AVDD, DVDD + PVDD and A2VDD pins on the chip. +- v1p2-supply: Only for ADV7533. A supply that powers up the V1P2 pin on the + chip. Can be either 1.2V or 1.8V. +- v3p3-supply: Only for ADV7533. A 3.3V supply that powers up the V3P3 pin on + the chip. Required nodes:
Add the regulator supply properties needed for ADV7533. The regulator names are named after the pin names. The exact use of each supply isn't clear from the data sheets. The regulators are specified as optional properties since there can be boards which have a fixed supply directly routed to the pins, and these may not be modelled as regulator supplies. There might be a similar set of regulators for ADV7511, but we don't have the docs at the moment to find out what supplies it needs. The regulator properties needed by ADV7511 can be updated as we get more data on it. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Archit Taneja <architt@codeaurora.org> --- Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 6 ++++++ 1 file changed, 6 insertions(+)