ath10k: add cc_wraparound type for QCA9888 and QCA9884
diff mbox

Message ID 1474026327-7065-1-git-send-email-akolli@qti.qualcomm.com
State Accepted
Commit bafe492610d58ec66cc149b19c51774efd95344a
Delegated to: Kalle Valo
Headers show

Commit Message

akolli@qti.qualcomm.com Sept. 16, 2016, 11:45 a.m. UTC
From: Anilkumar Kolli <akolli@qti.qualcomm.com>

During offchannel scan, iw survey dump shows wrong values.
Fix this by assigning cycle counter wranarround type for
QCA9888 and QCA9884, they share same config with QCA4019.

Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c |    2 ++
 1 file changed, 2 insertions(+)

Comments

Kalle Valo Oct. 4, 2016, 2:58 p.m. UTC | #1
akolli@qti.qualcomm.com wrote:
> From: Anilkumar Kolli <akolli@qti.qualcomm.com>
> 
> During offchannel scan, iw survey dump shows wrong values.
> Fix this by assigning cycle counter wranarround type for
> QCA9888 and QCA9884, they share same config with QCA4019.
> 
> Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>

Patch applied to ath-next branch of ath.git, thanks.

bafe492610d5 ath10k: add cc_wraparound type for QCA9888 and QCA9884

Patch
diff mbox

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 3a8984ba9f74..93168d9f8902 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -191,6 +191,7 @@  static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca9984/qca9994 hw1.0",
 		.patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
 		.uart_pin = 7,
+		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
 		.otp_exe_param = 0x00000700,
 		.continuous_frag_desc = true,
 		.cck_rate_map_rev2 = true,
@@ -215,6 +216,7 @@  static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca9888 hw2.0",
 		.patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
 		.uart_pin = 7,
+		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
 		.otp_exe_param = 0x00000700,
 		.continuous_frag_desc = true,
 		.channel_counters_freq_hz = 150000,