@@ -2306,6 +2306,18 @@ struct cfg80211_nan_conf {
};
/**
+ * enum cfg80211_nan_conf_changes - indicates changed fields in NAN
+ * configuration
+ *
+ * @CFG80211_NAN_CONF_CHANGED_PREF: master preference
+ * @CFG80211_NAN_CONF_CHANGED_DUAL: dual band operation
+ */
+enum cfg80211_nan_conf_changes {
+ CFG80211_NAN_CONF_CHANGED_PREF = BIT(0),
+ CFG80211_NAN_CONF_CHANGED_DUAL = BIT(1),
+};
+
+/**
* struct cfg80211_nan_func_filter - a NAN function Rx / Tx filter
*
* @filter: the content of the filter
@@ -2670,6 +2682,9 @@ struct cfg80211_nan_func {
* On success the driver should assign an instance_id in the
* provided @nan_func.
* @del_nan_func: Delete a NAN function.
+ * @nan_change_conf: changes NAN configuration. The changed parameters must
+ * be specified in @changes (using &enum cfg80211_nan_conf_changes);
+ * All other parameters must be ignored.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2942,6 +2957,10 @@ struct cfg80211_ops {
struct cfg80211_nan_func *nan_func);
void (*del_nan_func)(struct wiphy *wiphy, struct wireless_dev *wdev,
u64 cookie);
+ int (*nan_change_conf)(struct wiphy *wiphy,
+ struct wireless_dev *wdev,
+ struct cfg80211_nan_conf *conf,
+ u32 changes);
};
/*
@@ -862,6 +862,10 @@
* the response to this command.
* Look at %NL80211_ATTR_SOCKET_OWNER as well.
* @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie.
+ * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN configuration. NAN
+ * must be operational (%NL80211_CMD_START_NAN was executed).
+ * It must contain at least one of the following attributes:
+ * %NL80211_ATTR_NAN_MASTER_PREF, %NL80211_ATTR_NAN_DUAL.
*
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
@@ -1055,6 +1059,7 @@ enum nl80211_commands {
NL80211_CMD_STOP_NAN,
NL80211_CMD_ADD_NAN_FUNCTION,
NL80211_CMD_DEL_NAN_FUNCTION,
+ NL80211_CMD_CHANGE_NAN_CONFIG,
/* add new commands above here */
@@ -1904,12 +1909,14 @@ enum nl80211_commands {
* used to pull the stored data for mesh peer in power save state.
*
* @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by
- * %NL80211_CMD_START_NAN. Its type is u8 and it can't be 0.
+ * %NL80211_CMD_START_NAN and optionally with
+ * %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0.
* Also, values 1 and 255 are reserved for certification purposes and
* should not be used during a normal device operation.
* @NL80211_ATTR_NAN_DUAL: NAN dual band operation config (see
* &enum nl80211_nan_dual_band_conf). This attribute is used with
- * %NL80211_CMD_START_NAN.
+ * %NL80211_CMD_START_NAN and optionally with
+ * %NL80211_CMD_CHANGE_NAN_CONFIG.
* @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See
* &enum nl80211_nan_func_attributes for description of this nested
* attribute.
@@ -10829,6 +10829,40 @@ static int nl80211_nan_del_func(struct sk_buff *skb,
return 0;
}
+static int nl80211_nan_change_config(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct wireless_dev *wdev = info->user_ptr[1];
+ struct cfg80211_nan_conf conf = {};
+ u32 changed = 0;
+
+ if (wdev->iftype != NL80211_IFTYPE_NAN)
+ return -EOPNOTSUPP;
+
+ if (!wdev->nan_started)
+ return -ENOTCONN;
+
+ if (info->attrs[NL80211_ATTR_NAN_MASTER_PREF]) {
+ conf.master_pref =
+ nla_get_u8(info->attrs[NL80211_ATTR_NAN_MASTER_PREF]);
+ if (conf.master_pref <= 1 || conf.master_pref == 255)
+ return -EINVAL;
+
+ changed |= CFG80211_NAN_CONF_CHANGED_PREF;
+ }
+
+ if (info->attrs[NL80211_ATTR_NAN_DUAL]) {
+ conf.dual = nla_get_u8(info->attrs[NL80211_ATTR_NAN_DUAL]);
+ changed |= CFG80211_NAN_CONF_CHANGED_DUAL;
+ }
+
+ if (!changed)
+ return -EINVAL;
+
+ return rdev_nan_change_conf(rdev, wdev, &conf, changed);
+}
+
static int nl80211_get_protocol_features(struct sk_buff *skb,
struct genl_info *info)
{
@@ -12203,6 +12237,14 @@ static const struct genl_ops nl80211_ops[] = {
NL80211_FLAG_NEED_RTNL,
},
{
+ .cmd = NL80211_CMD_CHANGE_NAN_CONFIG,
+ .doit = nl80211_nan_change_config,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_WDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
+ {
.cmd = NL80211_CMD_SET_MCAST_RATE,
.doit = nl80211_set_mcast_rate,
.policy = nl80211_policy,
@@ -928,6 +928,23 @@ static inline void rdev_del_nan_func(struct cfg80211_registered_device *rdev,
trace_rdev_return_void(&rdev->wiphy);
}
+static inline int
+rdev_nan_change_conf(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev,
+ struct cfg80211_nan_conf *conf, u32 changes)
+{
+ int ret;
+
+ trace_rdev_nan_change_conf(&rdev->wiphy, wdev, conf, changes);
+ if (rdev->ops->nan_change_conf)
+ ret = rdev->ops->nan_change_conf(&rdev->wiphy, wdev, conf,
+ changes);
+ else
+ ret = -ENOTSUPP;
+ trace_rdev_return_int(&rdev->wiphy, ret);
+ return ret;
+}
+
static inline int rdev_set_mac_acl(struct cfg80211_registered_device *rdev,
struct net_device *dev,
struct cfg80211_acl_data *params)
@@ -1911,6 +1911,30 @@ TRACE_EVENT(rdev_start_nan,
__entry->dual)
);
+TRACE_EVENT(rdev_nan_change_conf,
+ TP_PROTO(struct wiphy *wiphy, struct wireless_dev *wdev,
+ struct cfg80211_nan_conf *conf, u32 changes),
+ TP_ARGS(wiphy, wdev, conf, changes),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ WDEV_ENTRY
+ __field(u8, master_pref)
+ __field(u8, dual);
+ __field(u32, changes);
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ WDEV_ASSIGN;
+ __entry->master_pref = conf->master_pref;
+ __entry->dual = conf->dual;
+ __entry->changes = changes;
+ ),
+ TP_printk(WIPHY_PR_FMT ", " WDEV_PR_FMT
+ ", master preference: %u, dual: %d, changes: %x",
+ WIPHY_PR_ARG, WDEV_PR_ARG, __entry->master_pref,
+ __entry->dual, __entry->changes)
+);
+
DEFINE_EVENT(wiphy_wdev_evt, rdev_stop_nan,
TP_PROTO(struct wiphy *wiphy, struct wireless_dev *wdev),
TP_ARGS(wiphy, wdev)