Message ID | 20160922000331.4193-1-andrey.utkin@corp.bluecherry.net (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Thu, Sep 22, 2016 at 03:03:31AM +0300, Andrey Utkin wrote: > This fixes a lockup at device probing which happens on some solo6010 > hardware samples. This is a regression introduced by commit e1ceb25a1569 > ("[media] SOLO6x10: remove unneeded register locking and barriers") > > The observed lockup happens in solo_set_motion_threshold() called from > solo_motion_config(). > > This extra "flushing" is not fundamentally needed for every write, but > apparently the code in driver assumes such behaviour at last in some > places. > > Actual fix was proposed by Hans Verkuil. > > Signed-off-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net> > --- > drivers/media/pci/solo6x10/solo6x10.h | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/media/pci/solo6x10/solo6x10.h b/drivers/media/pci/solo6x10/solo6x10.h > index 5bd4987..3f8da5e 100644 > --- a/drivers/media/pci/solo6x10/solo6x10.h > +++ b/drivers/media/pci/solo6x10/solo6x10.h > @@ -284,7 +284,10 @@ static inline u32 solo_reg_read(struct solo_dev *solo_dev, int reg) > static inline void solo_reg_write(struct solo_dev *solo_dev, int reg, > u32 data) > { > + u16 val; > + > writel(data, solo_dev->reg_base + reg); > + pci_read_config_word(solo_dev->pdev, PCI_STATUS, &val); > } > > static inline void solo_irq_on(struct solo_dev *dev, u32 mask) > -- > 2.9.2 > Mauro, Hans, Please pick this up. This has been around for a month, I expected it would get to v4.9-rc1 easily. Thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/pci/solo6x10/solo6x10.h b/drivers/media/pci/solo6x10/solo6x10.h index 5bd4987..3f8da5e 100644 --- a/drivers/media/pci/solo6x10/solo6x10.h +++ b/drivers/media/pci/solo6x10/solo6x10.h @@ -284,7 +284,10 @@ static inline u32 solo_reg_read(struct solo_dev *solo_dev, int reg) static inline void solo_reg_write(struct solo_dev *solo_dev, int reg, u32 data) { + u16 val; + writel(data, solo_dev->reg_base + reg); + pci_read_config_word(solo_dev->pdev, PCI_STATUS, &val); } static inline void solo_irq_on(struct solo_dev *dev, u32 mask)
This fixes a lockup at device probing which happens on some solo6010 hardware samples. This is a regression introduced by commit e1ceb25a1569 ("[media] SOLO6x10: remove unneeded register locking and barriers") The observed lockup happens in solo_set_motion_threshold() called from solo_motion_config(). This extra "flushing" is not fundamentally needed for every write, but apparently the code in driver assumes such behaviour at last in some places. Actual fix was proposed by Hans Verkuil. Signed-off-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net> --- drivers/media/pci/solo6x10/solo6x10.h | 3 +++ 1 file changed, 3 insertions(+)