diff mbox

tpm, tpm_crb: remove redundant CRB_FL_CRB_START flag

Message ID 20161017204224.27163-1-jarkko.sakkinen@linux.intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jarkko Sakkinen Oct. 17, 2016, 8:42 p.m. UTC
Because all the existing hardware have HID MSFT0101 we end up always
setting CRB_FL_CRB_START flag as a workaround for 4th Gen Core CPUs.
Even if ACPI start is used, the driver will always issue also CRB start.

This commit makes the invocation of CRB start unconditional.

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
---
 drivers/char/tpm/tpm_crb.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

Comments

Jarkko Sakkinen Oct. 17, 2016, 10:51 p.m. UTC | #1
On Mon, Oct 17, 2016 at 11:42:24PM +0300, Jarkko Sakkinen wrote:
> Because all the existing hardware have HID MSFT0101 we end up always
> setting CRB_FL_CRB_START flag as a workaround for 4th Gen Core CPUs.
> Even if ACPI start is used, the driver will always issue also CRB start.
> 
> This commit makes the invocation of CRB start unconditional.
> 
> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> ---
>  drivers/char/tpm/tpm_crb.c | 16 +++++-----------
>  1 file changed, 5 insertions(+), 11 deletions(-)

I will include this to the next version of locale series if this is
accepted. Just wanted to make sure that this is OK before I make the
next version of the series.

/Jarkko

> 
> diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
> index 65040d7..5928ec8 100644
> --- a/drivers/char/tpm/tpm_crb.c
> +++ b/drivers/char/tpm/tpm_crb.c
> @@ -72,7 +72,6 @@ enum crb_status {
>  
>  enum crb_flags {
>  	CRB_FL_ACPI_START	= BIT(0),
> -	CRB_FL_CRB_START	= BIT(1),
>  };
>  
>  struct crb_priv {
> @@ -226,8 +225,11 @@ static int crb_send(struct tpm_chip *chip, u8 *buf, size_t len)
>  	/* Make sure that cmd is populated before issuing start. */
>  	wmb();
>  
> -	if (priv->flags & CRB_FL_CRB_START)
> -		iowrite32(CRB_START_INVOKE, &priv->cca->start);
> +
> +	/* At least some of the 4th Gen Core CPUs that report only needing ACPI
> +	 * start require also CRB start so we always set it just in case.
> +	 */
> +	iowrite32(CRB_START_INVOKE, &priv->cca->start);
>  
>  	if (priv->flags & CRB_FL_ACPI_START)
>  		rc = crb_do_acpi_start(chip);
> @@ -407,14 +409,6 @@ static int crb_acpi_add(struct acpi_device *device)
>  	if (!priv)
>  		return -ENOMEM;
>  
> -	/* The reason for the extra quirk is that the PTT in 4th Gen Core CPUs
> -	 * report only ACPI start but in practice seems to require both
> -	 * ACPI start and CRB start.
> -	 */
> -	if (sm == ACPI_TPM2_COMMAND_BUFFER || sm == ACPI_TPM2_MEMORY_MAPPED ||
> -	    !strcmp(acpi_device_hid(device), "MSFT0101"))
> -		priv->flags |= CRB_FL_CRB_START;
> -
>  	if (sm == ACPI_TPM2_START_METHOD ||
>  	    sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD)
>  		priv->flags |= CRB_FL_ACPI_START;
> -- 
> 2.9.3
> 

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
Winkler, Tomas Oct. 19, 2016, 10:28 a.m. UTC | #2
> 
> On Mon, Oct 17, 2016 at 11:42:24PM +0300, Jarkko Sakkinen wrote:
> > Because all the existing hardware have HID MSFT0101 we end up always
> > setting CRB_FL_CRB_START flag as a workaround for 4th Gen Core CPUs.
> > Even if ACPI start is used, the driver will always issue also CRB start.

Do you have some more historical data about this fix, I was wondering about this quirk before, when restructuring the start method parsing. 
The description is ' in practice seems to require both'  sounds not certain about the root cause of this.


> > This commit makes the invocation of CRB start unconditional.
> >
> > Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> > ---
> >  drivers/char/tpm/tpm_crb.c | 16 +++++-----------
> >  1 file changed, 5 insertions(+), 11 deletions(-)
> 
> I will include this to the next version of locale series if this is accepted. Just
> wanted to make sure that this is OK before I make the next version of the
> series.
> 
> /Jarkko
> 
> >
> > diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
> > index 65040d7..5928ec8 100644
> > --- a/drivers/char/tpm/tpm_crb.c
> > +++ b/drivers/char/tpm/tpm_crb.c
> > @@ -72,7 +72,6 @@ enum crb_status {
> >
> >  enum crb_flags {
> >  	CRB_FL_ACPI_START	= BIT(0),
> > -	CRB_FL_CRB_START	= BIT(1),
> >  };
> >
> >  struct crb_priv {
> > @@ -226,8 +225,11 @@ static int crb_send(struct tpm_chip *chip, u8 *buf,
> size_t len)
> >  	/* Make sure that cmd is populated before issuing start. */
> >  	wmb();
> >
> > -	if (priv->flags & CRB_FL_CRB_START)
> > -		iowrite32(CRB_START_INVOKE, &priv->cca->start);
> > +
> > +	/* At least some of the 4th Gen Core CPUs that report only needing
> ACPI
> > +	 * start require also CRB start so we always set it just in case.
> > +	 */
> > +	iowrite32(CRB_START_INVOKE, &priv->cca->start);
> >
> >  	if (priv->flags & CRB_FL_ACPI_START)
> >  		rc = crb_do_acpi_start(chip);
> > @@ -407,14 +409,6 @@ static int crb_acpi_add(struct acpi_device *device)
> >  	if (!priv)
> >  		return -ENOMEM;
> >
> > -	/* The reason for the extra quirk is that the PTT in 4th Gen Core CPUs
> > -	 * report only ACPI start but in practice seems to require both
> > -	 * ACPI start and CRB start.
> > -	 */
> > -	if (sm == ACPI_TPM2_COMMAND_BUFFER || sm ==
> ACPI_TPM2_MEMORY_MAPPED ||
> > -	    !strcmp(acpi_device_hid(device), "MSFT0101"))
> > -		priv->flags |= CRB_FL_CRB_START;
> > -
> >  	if (sm == ACPI_TPM2_START_METHOD ||
> >  	    sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD)
> >  		priv->flags |= CRB_FL_ACPI_START;
> > --
> > 2.9.3
> >
> 
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> tpmdd-devel mailing list
> tpmdd-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/tpmdd-devel

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
Jarkko Sakkinen Oct. 19, 2016, 4:09 p.m. UTC | #3
On Wed, Oct 19, 2016 at 10:28:29AM +0000, Winkler, Tomas wrote:
> 
> 
> > 
> > On Mon, Oct 17, 2016 at 11:42:24PM +0300, Jarkko Sakkinen wrote:
> > > Because all the existing hardware have HID MSFT0101 we end up always
> > > setting CRB_FL_CRB_START flag as a workaround for 4th Gen Core CPUs.
> > > Even if ACPI start is used, the driver will always issue also CRB start.
> 
> Do you have some more historical data about this fix, I was wondering
> about this quirk before, when restructuring the start method parsing.
> The description is ' in practice seems to require both'  sounds not
> certain about the root cause of this.

I have a 4th Gen Core NUC where I experienced this issue. It reported
requiring only ACPI start but actually required ACPI + CRB start. The
comment could have been better.

/Jarkko

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
diff mbox

Patch

diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
index 65040d7..5928ec8 100644
--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -72,7 +72,6 @@  enum crb_status {
 
 enum crb_flags {
 	CRB_FL_ACPI_START	= BIT(0),
-	CRB_FL_CRB_START	= BIT(1),
 };
 
 struct crb_priv {
@@ -226,8 +225,11 @@  static int crb_send(struct tpm_chip *chip, u8 *buf, size_t len)
 	/* Make sure that cmd is populated before issuing start. */
 	wmb();
 
-	if (priv->flags & CRB_FL_CRB_START)
-		iowrite32(CRB_START_INVOKE, &priv->cca->start);
+
+	/* At least some of the 4th Gen Core CPUs that report only needing ACPI
+	 * start require also CRB start so we always set it just in case.
+	 */
+	iowrite32(CRB_START_INVOKE, &priv->cca->start);
 
 	if (priv->flags & CRB_FL_ACPI_START)
 		rc = crb_do_acpi_start(chip);
@@ -407,14 +409,6 @@  static int crb_acpi_add(struct acpi_device *device)
 	if (!priv)
 		return -ENOMEM;
 
-	/* The reason for the extra quirk is that the PTT in 4th Gen Core CPUs
-	 * report only ACPI start but in practice seems to require both
-	 * ACPI start and CRB start.
-	 */
-	if (sm == ACPI_TPM2_COMMAND_BUFFER || sm == ACPI_TPM2_MEMORY_MAPPED ||
-	    !strcmp(acpi_device_hid(device), "MSFT0101"))
-		priv->flags |= CRB_FL_CRB_START;
-
 	if (sm == ACPI_TPM2_START_METHOD ||
 	    sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD)
 		priv->flags |= CRB_FL_ACPI_START;