| Message ID | 1479863388-23678-4-git-send-email-jeremymc@redhat.com (mailing list archive) |
|---|---|
| State | Under Review, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On Tue, Nov 22, 2016 at 05:09:46PM -0800, Jeremy McNicoll wrote: > Add Nexus 5X (msm8992) SDHCI support, including initial regulator > entries to support enabling the main SDHCI/MMC. > > The msm8994 RPM regulator talks over SMD to the APPS processor. > > Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com> > --- > .../bindings/regulator/qcom,smd-rpm-regulator.txt | 40 ++++ > .../boot/dts/qcom/msm8992-bullhead-rev-101.dts | 262 +++++++++++++++++++++ > arch/arm64/boot/dts/qcom/msm8992-pins.dtsi | 82 +++++++ > arch/arm64/boot/dts/qcom/msm8992.dtsi | 153 ++++++++++++ > drivers/regulator/qcom_smd-regulator.c | 49 ++++ > 5 files changed, 586 insertions(+) A few nits, otherwise, Acked-by: Rob Herring <robh@kernel.org> > > diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt > index 1f8d6f8..126989b 100644 > --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt > +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt > @@ -23,6 +23,7 @@ Regulator nodes are identified by their compatible: > "qcom,rpm-pm8916-regulators" > "qcom,rpm-pm8941-regulators" > "qcom,rpm-pma8084-regulators" > + "qcom,rpm-pm8994-regulators" > > - vdd_s1-supply: > - vdd_s2-supply: > @@ -97,6 +98,40 @@ Regulator nodes are identified by their compatible: > Definition: reference to regulator supplying the input pin, as > described in the data sheet > > +- vdd_s1-supply: > +- vdd_s2-supply: > +- vdd_s3-supply: > +- vdd_s4-supply: > +- vdd_s5-supply: > +- vdd_s6-supply: > +- vdd_s7-supply: > +- vdd_l1_l11-supply: > +- vdd_l2_l3_l4_l27-supply: > +- vdd_l5_l7-supply: > +- vdd_l6_l12_l14_l15_l26-supply: > +- vdd_l8-supply: > +- vdd_l9_l10_l13_l20_l23_l24-supply: > +- vdd_l1_l11-supply: > +- vdd_l6_l12_l14_l15_l26-supply: > +- vdd_l16_l25-supply: > +- vdd_l17-supply: > +- vdd_l18-supply: > +- vdd_l19-supply: > +- vdd_l21-supply: > +- vdd_l22-supply: > +- vdd_l16_l25-supply: > +- vdd_l27-supply: > +- vdd_l28-supply: > +- vdd_l29-supply: > +- vdd_l30-supply: > +- vdd_l31-supply: > +- vdd_l32-supply: > + Usage: optional (pm8994 only) > + Value type: <phandle> > + Definition: reference to regulator supplying the input pin, as > + described in the data sheet. > + > + > The regulator node houses sub-nodes for each regulator within the device. Each > sub-node is identified using the node's name, with valid values listed for each > of the pmics below. > @@ -118,6 +153,11 @@ pma8084: > l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, > l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 > > +pm8994: > + s1, s2, s3, s4, s5, s6, s7, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, > + l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, > + l27, l28, l29, l30, l31, l32, lvs1, lvs2 > + > The content of each sub-node is defined by the standard binding for regulators - > see regulator.txt. > > diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts > index 4542133..2ce8798 100644 > --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts > +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts > @@ -39,3 +39,265 @@ > }; > }; > }; > + > +&smd_rpm { > + rpm { > + rpm_requests { > + pm8994-regulators { > + > + vdd_l1-supply = <&pm8994_s1>; > + vdd_l2_26_28-supply = <&pm8994_s3>; > + vdd_l3_11-supply = <&pm8994_s3>; > + vdd_l4_27_31-supply = <&pm8994_s3>; > + vdd_l5_7-supply = <&pm8994_s3>; > + vdd_l6_12_32-supply = <&pm8994_s5>; > + vdd_l8_16_30-supply = <&vreg_vph_pwr>; > + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; > + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; > + vdd_l14_15-supply = <&pm8994_s5>; > + vdd_l17_29-supply = <&vreg_vph_pwr>; > + vdd_l20_21-supply = <&vreg_vph_pwr>; > + vdd_l25-supply = <&pm8994_s5>; > + /*vin_lvs1_2 = <&pm8994_s4>; */ > + > + s1 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <800000>; > + }; > + > + s2 { > + }; > + > + s3 { > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <1300000>; > + }; > + > + s4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-allow-set-load; > + regulator-system-load = <325000>; > + }; > + > + s5 { > + regulator-min-microvolt = <2150000>; > + regulator-max-microvolt = <2150000>; > + }; > + > + s7 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + l1 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + l2 { > + regulator-min-microvolt = <1250000>; > + regulator-max-microvolt = <1250000>; > + }; > + > + l3 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + l4 { > + regulator-min-microvolt = <1225000>; > + regulator-max-microvolt = <1225000>; > + }; > + > + l5 { > + }; > + > + l6 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + l7 { > + }; > + > + l8 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + l9 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + l10 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + }; > + > + l11 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + qcom,init-voltage = <1200000>; > + }; > + > + l12 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + proxy-supply = <&pm8994_l12>; > + qcom,proxy-consumer-enable; > + qcom,proxy-consumer-current = <10000>; > + status = "okay"; > + }; > + > + l13 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2950000>; > + qcom,init-voltage = <2950000>; > + status = "okay"; > + }; > + > + l14 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + qcom,init-voltage = <1200000>; > + proxy-supply = <&pm8994_l14>; > + qcom,proxy-consumer-enable; > + qcom,proxy-consumer-current = <10000>; > + status = "okay"; > + }; > + > + l15 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + status = "okay"; > + }; > + > + l16 { > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <2700000>; > + qcom,init-voltage = <2700000>; > + status = "okay"; > + }; > + > + l17 { > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <2700000>; > + qcom,init-voltage = <2700000>; > + status = "okay"; > + }; > + > + l18 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + qcom,init-voltage = <3000000>; > + qcom,init-ldo-mode = <1>; > + }; > + > + l19 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + status = "okay"; > + }; > + > + l20 { > + regulator-min-microvolt = <2950000>; > + regulator-max-microvolt = <2950000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-allow-set-load; > + regulator-system-load = <570000>; > + }; > + > + l21 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + qcom,init-voltage = <1800000>; > + }; > + > + l22 { > + regulator-min-microvolt = <3100000>; > + regulator-max-microvolt = <3100000>; > + qcom,init-voltage = <3100000>; > + }; > + > + l23 { > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + qcom,init-voltage = <2800000>; > + }; > + > + l24 { > + regulator-min-microvolt = <3075000>; > + regulator-max-microvolt = <3150000>; > + qcom,init-voltage = <3075000>; > + }; > + > + l25 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + }; > + > + l26 { > + /* TODO: value from downstream > + regulator-min-microvolt = <987500>; > + fails to apply */ > + }; > + > + l27 { > + regulator-min-microvolt = <1050000>; > + regulator-max-microvolt = <1050000>; > + qcom,init-voltage = <1050000>; > + }; > + > + l28 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + qcom,init-voltage = <1000000>; > + proxy-supply = <&pm8994_l28>; > + qcom,proxy-consumer-enable; > + qcom,proxy-consumer-current = <10000>; > + }; > + > + l29 { > + /* TODO: Unsupported voltage range.. > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + qcom,init-voltage = <2800000>; > + */ > + }; > + > + l30 { > + /* TODO: get this verified > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + */ > + }; > + > + l31 { > + regulator-min-microvolt = <1262500>; > + regulator-max-microvolt = <1262500>; > + qcom,init-voltage = <1262500>; > + }; > + > + l32 { > + /* TODO: get this verified > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + */ > + }; > + > + }; > + }; > + }; > +}; > diff --git a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi > index d2a26f0..15202c8 100644 > --- a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi > @@ -35,4 +35,86 @@ > bias-pull-down; > }; > }; > + > + /* 0-3 for sdc1 4-6 for sdc2 */ > + /* Order of pins */ > + /* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */ > + /* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */ > + pmx_sdc1_clk { > + sdc1_clk_on: clk_on { Use '-' rather than '_' for node names. (Labels don't matter) > + pinmux { > + pins = "sdc1_clk"; > + }; > + pinconf { > + pins = "sdc1_clk"; > + bias-disable = <0>; /* No pull */ > + drive-strength = <16>; /* 16mA */ > + }; > + }; > + sdc1_clk_off: clk_off { > + pinmux { > + pins = "sdc1_clk"; > + }; > + pinconf { > + pins = "sdc1_clk"; > + bias-disable = <0>; /* No pull */ > + drive-strength = <2>; /* 2mA */ > + }; > + }; > + }; > + > + pmx_sdc1_cmd { > + sdc1_cmd_on: cmd_on { > + pinmux { > + pins = "sdc1_cmd"; > + }; > + pinconf { > + pins = "sdc1_cmd"; > + bias-pull-up; > + drive-strength = <8>; > + }; > + }; > + sdc1_cmd_off: cmd_off { > + pinmux { > + pins = "sdc1_cmd"; > + }; > + pinconf { > + pins = "sdc1_cmd"; > + bias-pull-up = <0x3>; /* same as 3.10 ?? */ > + drive-strength = <2>; /* 2mA */ > + }; > + }; > + }; > + > + pmx_sdc1_data { > + sdc1_data_on: data_on { > + pinmux { > + pins = "sdc1_data"; > + }; > + pinconf { > + pins = "sdc1_data"; > + bias-pull-up; > + drive-strength = <8>; /* 8mA */ > + }; > + }; > + sdc1_data_off: data_off { > + pinmux { > + pins = "sdc1_data"; > + }; > + pinconf { > + pins = "sdc1_data"; > + bias-pull-up; > + drive-strength = <2>; > + }; > + }; > + }; > + > + pmx_sdc1_rclk { > + sdc1_rclk_on: rclk_on { > + bias-pull-down; /* pull down */ > + }; > + sdc1_rclk_off: rclk_off { > + bias-pull-down; /* pull down */ > + }; > + }; > }; > diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi > index 44b2d37..d104770 100644 > --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi > @@ -82,6 +82,12 @@ > <0xf9002000 0x1000>; > }; > > + apcs: syscon@0xf900d000 { Drop the '0x'. > + compatible = "syscon"; > + reg = <0xf900d000 0x2000>; > + }; > + > + > timer@f9020000 { > #address-cells = <1>; > #size-cells = <1>; > @@ -172,12 +178,159 @@ > #power-domain-cells = <1>; > reg = <0xfc400000 0x2000>; > }; > + > + sdhci1: qcom,sdhci@f9824900 { mmc@... > + compatible = "qcom,sdhci-msm-v4"; > + reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; > + reg-names = "hc_mem", "core_mem"; > + > + interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>, > + <GIC_SPI 138 IRQ_TYPE_NONE>; > + interrupt-names = "hc_irq", "pwr_irq"; > + > + clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>, > + <&clock_gcc GCC_SDCC1_AHB_CLK>; > + clock-names = "core", "iface"; > + > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on > + &sdc1_rclk_on>; > + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off > + &sdc1_rclk_off>; > + > + vdd-supply = <&pm8994_l20>; > + qcom,vdd-voltage-level = <2950000 2950000>; > + qcom,vdd-current-level = <200 570000>; > + > + vdd-io-supply = <&pm8994_s4>; > + qcom,vdd-io-voltage-level = <1800000 1800000>; > + qcom,vdd-io-current-level = <200 325000>; > + > + regulator-always-on; > + bus-width = <8>; > + mmc-hs400-1_8v; > + status = "okay"; > + }; > + > + vreg_vph_pwr: vreg-vph-pwr { > + compatible = "regulator-fixed"; > + status = "okay"; > + regulator-name = "vph-pwr"; > + > + regulator-min-microvolt = <3600000>; > + regulator-max-microvolt = <3600000>; > + > + regulator-always-on; > + }; > + > + rpm_msg_ram: memory@fc428000 { > + compatible = "qcom,rpm-msg-ram"; > + reg = <0xfc428000 0x4000>; > + }; > + > + sfpb_mutex_regs: syscon@fd484000 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "syscon"; > + reg = <0xfd484000 0x400>; > + }; > + > + sfpb_mutex: hwmutex { > + compatible = "qcom,sfpb-mutex"; > + syscon = <&sfpb_mutex_regs 0x0 0x100>; > + #hwlock-cells = <1>; > + }; > + > + smem { > + compatible = "qcom,smem"; > + memory-region = <&smem_region>; > + qcom,rpm-msg-ram = <&rpm_msg_ram>; > + hwlocks = <&sfpb_mutex 3>; > + }; > }; > > memory { > device_type = "memory"; > reg = <0 0 0 0>; // bootloader will update > }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + smem_region: smem@6a00000 { > + reg = <0x0 0x6a00000 0x0 0x200000>; > + no-map; > + }; > + }; > + > + smd_rpm: smd { > + compatible = "qcom,smd"; > + > + rpm { > + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; > + qcom,ipc = <&apcs 8 0>; > + qcom,smd-edge = <15>; > + qcom,local-pid = <0>; > + qcom,remote-pid = <6>; > + > + rpm_requests { > + compatible = "qcom,rpm-msm8994"; > + qcom,smd-channels = "rpm_requests"; > + > + rpmcc: qcom,rpmcc { > + /* TODO: update when rpmcc-msm8994 support added */ > + compatible = "qcom,rpmcc-msm8916", > + "qcom,rpmcc"; > + #clock-cells = <1>; > + }; > + > + smd_rpm_regulators: pm8994-regulators { > + compatible = "qcom,rpm-pm8994-regulators"; > + > + pm8994_s1: s1 {}; > + pm8994_s2: s2 {}; > + pm8994_s3: s3 {}; > + pm8994_s4: s4 {}; > + pm8994_s5: s5 {}; > + pm8994_s6: s6 {}; > + pm8994_s7: s7 {}; > + > + pm8994_l1: l1 {}; > + pm8994_l2: l2 {}; > + pm8994_l3: l3 {}; > + pm8994_l4: l4 {}; > + pm8994_l6: l6 {}; > + pm8994_l8: l8 {}; > + pm8994_l9: l9 {}; > + pm8994_l10: l10 {}; > + pm8994_l11: l11 {}; > + pm8994_l12: l12 {}; > + pm8994_l13: l13 {}; > + pm8994_l14: l14 {}; > + pm8994_l15: l15 {}; > + pm8994_l16: l16 {}; > + pm8994_l17: l17 {}; > + pm8994_l18: l18 {}; > + pm8994_l19: l19 {}; > + pm8994_l20: l20 {}; > + pm8994_l21: l21 {}; > + pm8994_l22: l22 {}; > + pm8994_l23: l23 {}; > + pm8994_l24: l24 {}; > + pm8994_l25: l25 {}; > + pm8994_l26: l26 {}; > + pm8994_l27: l27 {}; > + pm8994_l28: l28 {}; > + pm8994_l29: l29 {}; > + pm8994_l30: l30 {}; > + pm8994_l31: l31 {}; > + pm8994_l32: l32 {}; > + }; > + }; > + }; > + }; > }; > > > diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c > index 8ed46a9..a7e8ce7 100644 > --- a/drivers/regulator/qcom_smd-regulator.c > +++ b/drivers/regulator/qcom_smd-regulator.c > @@ -443,11 +443,60 @@ static const struct rpm_regulator_data rpm_pma8084_regulators[] = { > {} > }; > > +static const struct rpm_regulator_data rpm_pm8994_regulators[] = { > + { "s1", QCOM_SMD_RPM_SMPA, 1, &pma8084_ftsmps, "vdd_s1" }, > + { "s2", QCOM_SMD_RPM_SMPA, 2, &pma8084_ftsmps, "vdd_s2" }, > + { "s3", QCOM_SMD_RPM_SMPA, 3, &pma8084_hfsmps, "vdd_s3" }, > + { "s4", QCOM_SMD_RPM_SMPA, 4, &pma8084_hfsmps, "vdd_s4" }, > + { "s5", QCOM_SMD_RPM_SMPA, 5, &pma8084_hfsmps, "vdd_s5" }, > + { "s6", QCOM_SMD_RPM_SMPA, 6, &pma8084_ftsmps, "vdd_s6" }, > + { "s7", QCOM_SMD_RPM_SMPA, 7, &pma8084_ftsmps, "vdd_s7" }, > + > + { "l1", QCOM_SMD_RPM_LDOA, 1, &pma8084_nldo, "vdd_l1_l11" }, > + { "l2", QCOM_SMD_RPM_LDOA, 2, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, > + { "l3", QCOM_SMD_RPM_LDOA, 3, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, > + { "l4", QCOM_SMD_RPM_LDOA, 4, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, > + { "l5", QCOM_SMD_RPM_LDOA, 5, &pma8084_pldo, "vdd_l5_l7" }, > + { "l6", QCOM_SMD_RPM_LDOA, 6, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, > + { "l7", QCOM_SMD_RPM_LDOA, 7, &pma8084_pldo, "vdd_l5_l7" }, > + { "l8", QCOM_SMD_RPM_LDOA, 8, &pma8084_pldo, "vdd_l8" }, > + { "l9", QCOM_SMD_RPM_LDOA, 9, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, > + { "l10", QCOM_SMD_RPM_LDOA, 10, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, > + { "l11", QCOM_SMD_RPM_LDOA, 11, &pma8084_nldo, "vdd_l1_l11" }, > + { "l12", QCOM_SMD_RPM_LDOA, 12, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, > + { "l13", QCOM_SMD_RPM_LDOA, 13, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, > + { "l14", QCOM_SMD_RPM_LDOA, 14, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, > + { "l15", QCOM_SMD_RPM_LDOA, 15, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, > + { "l16", QCOM_SMD_RPM_LDOA, 16, &pma8084_pldo, "vdd_l16_l25" }, > + { "l17", QCOM_SMD_RPM_LDOA, 17, &pma8084_pldo, "vdd_l17" }, > + { "l18", QCOM_SMD_RPM_LDOA, 18, &pma8084_pldo, "vdd_l18" }, > + { "l19", QCOM_SMD_RPM_LDOA, 19, &pma8084_pldo, "vdd_l19" }, > + { "l20", QCOM_SMD_RPM_LDOA, 20, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, > + { "l21", QCOM_SMD_RPM_LDOA, 21, &pma8084_pldo, "vdd_l21" }, > + { "l22", QCOM_SMD_RPM_LDOA, 22, &pma8084_pldo, "vdd_l22" }, > + { "l23", QCOM_SMD_RPM_LDOA, 23, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, > + { "l24", QCOM_SMD_RPM_LDOA, 24, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, > + { "l25", QCOM_SMD_RPM_LDOA, 25, &pma8084_pldo, "vdd_l16_l25" }, > + { "l26", QCOM_SMD_RPM_LDOA, 26, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, > + { "l27", QCOM_SMD_RPM_LDOA, 27, &pma8084_nldo, "vdd_l27" }, > + { "l28", QCOM_SMD_RPM_LDOA, 28, &pma8084_nldo, "vdd_l28" }, > + { "l29", QCOM_SMD_RPM_LDOA, 29, &pma8084_nldo, "vdd_l29" }, > + { "l30", QCOM_SMD_RPM_LDOA, 30, &pma8084_nldo, "vdd_l30" }, > + { "l31", QCOM_SMD_RPM_LDOA, 31, &pma8084_nldo, "vdd_l31" }, > + { "l32", QCOM_SMD_RPM_LDOA, 32, &pma8084_nldo, "vdd_l32" }, > + > + { "lvs1", QCOM_SMD_RPM_VSA, 1, &pma8084_switch }, > + { "lvs2", QCOM_SMD_RPM_VSA, 2, &pma8084_switch }, > + > + {} > +}; > + > static const struct of_device_id rpm_of_match[] = { > { .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators }, > { .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators }, > { .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators }, > { .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators }, > + { .compatible = "qcom,rpm-pm8994-regulators", .data = &rpm_pm8994_regulators }, > {} > }; > MODULE_DEVICE_TABLE(of, rpm_of_match); > -- > 2.6.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt index 1f8d6f8..126989b 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt @@ -23,6 +23,7 @@ Regulator nodes are identified by their compatible: "qcom,rpm-pm8916-regulators" "qcom,rpm-pm8941-regulators" "qcom,rpm-pma8084-regulators" + "qcom,rpm-pm8994-regulators" - vdd_s1-supply: - vdd_s2-supply: @@ -97,6 +98,40 @@ Regulator nodes are identified by their compatible: Definition: reference to regulator supplying the input pin, as described in the data sheet +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply: +- vdd_s6-supply: +- vdd_s7-supply: +- vdd_l1_l11-supply: +- vdd_l2_l3_l4_l27-supply: +- vdd_l5_l7-supply: +- vdd_l6_l12_l14_l15_l26-supply: +- vdd_l8-supply: +- vdd_l9_l10_l13_l20_l23_l24-supply: +- vdd_l1_l11-supply: +- vdd_l6_l12_l14_l15_l26-supply: +- vdd_l16_l25-supply: +- vdd_l17-supply: +- vdd_l18-supply: +- vdd_l19-supply: +- vdd_l21-supply: +- vdd_l22-supply: +- vdd_l16_l25-supply: +- vdd_l27-supply: +- vdd_l28-supply: +- vdd_l29-supply: +- vdd_l30-supply: +- vdd_l31-supply: +- vdd_l32-supply: + Usage: optional (pm8994 only) + Value type: <phandle> + Definition: reference to regulator supplying the input pin, as + described in the data sheet. + + The regulator node houses sub-nodes for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed for each of the pmics below. @@ -118,6 +153,11 @@ pma8084: l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 +pm8994: + s1, s2, s3, s4, s5, s6, s7, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, + l27, l28, l29, l30, l31, l32, lvs1, lvs2 + The content of each sub-node is defined by the standard binding for regulators - see regulator.txt. diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index 4542133..2ce8798 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -39,3 +39,265 @@ }; }; }; + +&smd_rpm { + rpm { + rpm_requests { + pm8994-regulators { + + vdd_l1-supply = <&pm8994_s1>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s3>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vreg_vph_pwr>; + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&vreg_vph_pwr>; + vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l25-supply = <&pm8994_s5>; + /*vin_lvs1_2 = <&pm8994_s4>; */ + + s1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + s2 { + }; + + s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <325000>; + }; + + s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l5 { + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + }; + + l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + }; + + l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + qcom,init-voltage = <1200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + proxy-supply = <&pm8994_l12>; + qcom,proxy-consumer-enable; + qcom,proxy-consumer-current = <10000>; + status = "okay"; + }; + + l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + qcom,init-voltage = <2950000>; + status = "okay"; + }; + + l14 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + qcom,init-voltage = <1200000>; + proxy-supply = <&pm8994_l14>; + qcom,proxy-consumer-enable; + qcom,proxy-consumer-current = <10000>; + status = "okay"; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + + l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + qcom,init-voltage = <2700000>; + status = "okay"; + }; + + l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + qcom,init-voltage = <2700000>; + status = "okay"; + }; + + l18 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + qcom,init-voltage = <3000000>; + qcom,init-ldo-mode = <1>; + }; + + l19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + + l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + qcom,init-voltage = <1800000>; + }; + + l22 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + qcom,init-voltage = <3100000>; + }; + + l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + qcom,init-voltage = <2800000>; + }; + + l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + qcom,init-voltage = <3075000>; + }; + + l25 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + }; + + l26 { + /* TODO: value from downstream + regulator-min-microvolt = <987500>; + fails to apply */ + }; + + l27 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + qcom,init-voltage = <1050000>; + }; + + l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + qcom,init-voltage = <1000000>; + proxy-supply = <&pm8994_l28>; + qcom,proxy-consumer-enable; + qcom,proxy-consumer-current = <10000>; + }; + + l29 { + /* TODO: Unsupported voltage range.. + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + qcom,init-voltage = <2800000>; + */ + }; + + l30 { + /* TODO: get this verified + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + */ + }; + + l31 { + regulator-min-microvolt = <1262500>; + regulator-max-microvolt = <1262500>; + qcom,init-voltage = <1262500>; + }; + + l32 { + /* TODO: get this verified + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + */ + }; + + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi index d2a26f0..15202c8 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi @@ -35,4 +35,86 @@ bias-pull-down; }; }; + + /* 0-3 for sdc1 4-6 for sdc2 */ + /* Order of pins */ + /* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */ + /* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */ + pmx_sdc1_clk { + sdc1_clk_on: clk_on { + pinmux { + pins = "sdc1_clk"; + }; + pinconf { + pins = "sdc1_clk"; + bias-disable = <0>; /* No pull */ + drive-strength = <16>; /* 16mA */ + }; + }; + sdc1_clk_off: clk_off { + pinmux { + pins = "sdc1_clk"; + }; + pinconf { + pins = "sdc1_clk"; + bias-disable = <0>; /* No pull */ + drive-strength = <2>; /* 2mA */ + }; + }; + }; + + pmx_sdc1_cmd { + sdc1_cmd_on: cmd_on { + pinmux { + pins = "sdc1_cmd"; + }; + pinconf { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <8>; + }; + }; + sdc1_cmd_off: cmd_off { + pinmux { + pins = "sdc1_cmd"; + }; + pinconf { + pins = "sdc1_cmd"; + bias-pull-up = <0x3>; /* same as 3.10 ?? */ + drive-strength = <2>; /* 2mA */ + }; + }; + }; + + pmx_sdc1_data { + sdc1_data_on: data_on { + pinmux { + pins = "sdc1_data"; + }; + pinconf { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <8>; /* 8mA */ + }; + }; + sdc1_data_off: data_off { + pinmux { + pins = "sdc1_data"; + }; + pinconf { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc1_rclk { + sdc1_rclk_on: rclk_on { + bias-pull-down; /* pull down */ + }; + sdc1_rclk_off: rclk_off { + bias-pull-down; /* pull down */ + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 44b2d37..d104770 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -82,6 +82,12 @@ <0xf9002000 0x1000>; }; + apcs: syscon@0xf900d000 { + compatible = "syscon"; + reg = <0xf900d000 0x2000>; + }; + + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -172,12 +178,159 @@ #power-domain-cells = <1>; reg = <0xfc400000 0x2000>; }; + + sdhci1: qcom,sdhci@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>, + <GIC_SPI 138 IRQ_TYPE_NONE>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>, + <&clock_gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on + &sdc1_rclk_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off + &sdc1_rclk_off>; + + vdd-supply = <&pm8994_l20>; + qcom,vdd-voltage-level = <2950000 2950000>; + qcom,vdd-current-level = <200 570000>; + + vdd-io-supply = <&pm8994_s4>; + qcom,vdd-io-voltage-level = <1800000 1800000>; + qcom,vdd-io-current-level = <200 325000>; + + regulator-always-on; + bus-width = <8>; + mmc-hs400-1_8v; + status = "okay"; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + status = "okay"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; + + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + + sfpb_mutex_regs: syscon@fd484000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "syscon"; + reg = <0xfd484000 0x400>; + }; + + sfpb_mutex: hwmutex { + compatible = "qcom,sfpb-mutex"; + syscon = <&sfpb_mutex_regs 0x0 0x100>; + #hwlock-cells = <1>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + hwlocks = <&sfpb_mutex 3>; + }; }; memory { device_type = "memory"; reg = <0 0 0 0>; // bootloader will update }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + smem_region: smem@6a00000 { + reg = <0x0 0x6a00000 0x0 0x200000>; + no-map; + }; + }; + + smd_rpm: smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + qcom,local-pid = <0>; + qcom,remote-pid = <6>; + + rpm_requests { + compatible = "qcom,rpm-msm8994"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: qcom,rpmcc { + /* TODO: update when rpmcc-msm8994 support added */ + compatible = "qcom,rpmcc-msm8916", + "qcom,rpmcc"; + #clock-cells = <1>; + }; + + smd_rpm_regulators: pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + pm8994_s1: s1 {}; + pm8994_s2: s2 {}; + pm8994_s3: s3 {}; + pm8994_s4: s4 {}; + pm8994_s5: s5 {}; + pm8994_s6: s6 {}; + pm8994_s7: s7 {}; + + pm8994_l1: l1 {}; + pm8994_l2: l2 {}; + pm8994_l3: l3 {}; + pm8994_l4: l4 {}; + pm8994_l6: l6 {}; + pm8994_l8: l8 {}; + pm8994_l9: l9 {}; + pm8994_l10: l10 {}; + pm8994_l11: l11 {}; + pm8994_l12: l12 {}; + pm8994_l13: l13 {}; + pm8994_l14: l14 {}; + pm8994_l15: l15 {}; + pm8994_l16: l16 {}; + pm8994_l17: l17 {}; + pm8994_l18: l18 {}; + pm8994_l19: l19 {}; + pm8994_l20: l20 {}; + pm8994_l21: l21 {}; + pm8994_l22: l22 {}; + pm8994_l23: l23 {}; + pm8994_l24: l24 {}; + pm8994_l25: l25 {}; + pm8994_l26: l26 {}; + pm8994_l27: l27 {}; + pm8994_l28: l28 {}; + pm8994_l29: l29 {}; + pm8994_l30: l30 {}; + pm8994_l31: l31 {}; + pm8994_l32: l32 {}; + }; + }; + }; + }; }; diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 8ed46a9..a7e8ce7 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -443,11 +443,60 @@ static const struct rpm_regulator_data rpm_pma8084_regulators[] = { {} }; +static const struct rpm_regulator_data rpm_pm8994_regulators[] = { + { "s1", QCOM_SMD_RPM_SMPA, 1, &pma8084_ftsmps, "vdd_s1" }, + { "s2", QCOM_SMD_RPM_SMPA, 2, &pma8084_ftsmps, "vdd_s2" }, + { "s3", QCOM_SMD_RPM_SMPA, 3, &pma8084_hfsmps, "vdd_s3" }, + { "s4", QCOM_SMD_RPM_SMPA, 4, &pma8084_hfsmps, "vdd_s4" }, + { "s5", QCOM_SMD_RPM_SMPA, 5, &pma8084_hfsmps, "vdd_s5" }, + { "s6", QCOM_SMD_RPM_SMPA, 6, &pma8084_ftsmps, "vdd_s6" }, + { "s7", QCOM_SMD_RPM_SMPA, 7, &pma8084_ftsmps, "vdd_s7" }, + + { "l1", QCOM_SMD_RPM_LDOA, 1, &pma8084_nldo, "vdd_l1_l11" }, + { "l2", QCOM_SMD_RPM_LDOA, 2, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, + { "l3", QCOM_SMD_RPM_LDOA, 3, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, + { "l4", QCOM_SMD_RPM_LDOA, 4, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, + { "l5", QCOM_SMD_RPM_LDOA, 5, &pma8084_pldo, "vdd_l5_l7" }, + { "l6", QCOM_SMD_RPM_LDOA, 6, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l7", QCOM_SMD_RPM_LDOA, 7, &pma8084_pldo, "vdd_l5_l7" }, + { "l8", QCOM_SMD_RPM_LDOA, 8, &pma8084_pldo, "vdd_l8" }, + { "l9", QCOM_SMD_RPM_LDOA, 9, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l10", QCOM_SMD_RPM_LDOA, 10, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l11", QCOM_SMD_RPM_LDOA, 11, &pma8084_nldo, "vdd_l1_l11" }, + { "l12", QCOM_SMD_RPM_LDOA, 12, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l13", QCOM_SMD_RPM_LDOA, 13, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l14", QCOM_SMD_RPM_LDOA, 14, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l15", QCOM_SMD_RPM_LDOA, 15, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l16", QCOM_SMD_RPM_LDOA, 16, &pma8084_pldo, "vdd_l16_l25" }, + { "l17", QCOM_SMD_RPM_LDOA, 17, &pma8084_pldo, "vdd_l17" }, + { "l18", QCOM_SMD_RPM_LDOA, 18, &pma8084_pldo, "vdd_l18" }, + { "l19", QCOM_SMD_RPM_LDOA, 19, &pma8084_pldo, "vdd_l19" }, + { "l20", QCOM_SMD_RPM_LDOA, 20, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l21", QCOM_SMD_RPM_LDOA, 21, &pma8084_pldo, "vdd_l21" }, + { "l22", QCOM_SMD_RPM_LDOA, 22, &pma8084_pldo, "vdd_l22" }, + { "l23", QCOM_SMD_RPM_LDOA, 23, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l24", QCOM_SMD_RPM_LDOA, 24, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l25", QCOM_SMD_RPM_LDOA, 25, &pma8084_pldo, "vdd_l16_l25" }, + { "l26", QCOM_SMD_RPM_LDOA, 26, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l27", QCOM_SMD_RPM_LDOA, 27, &pma8084_nldo, "vdd_l27" }, + { "l28", QCOM_SMD_RPM_LDOA, 28, &pma8084_nldo, "vdd_l28" }, + { "l29", QCOM_SMD_RPM_LDOA, 29, &pma8084_nldo, "vdd_l29" }, + { "l30", QCOM_SMD_RPM_LDOA, 30, &pma8084_nldo, "vdd_l30" }, + { "l31", QCOM_SMD_RPM_LDOA, 31, &pma8084_nldo, "vdd_l31" }, + { "l32", QCOM_SMD_RPM_LDOA, 32, &pma8084_nldo, "vdd_l32" }, + + { "lvs1", QCOM_SMD_RPM_VSA, 1, &pma8084_switch }, + { "lvs2", QCOM_SMD_RPM_VSA, 2, &pma8084_switch }, + + {} +}; + static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators }, { .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators }, { .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators }, { .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators }, + { .compatible = "qcom,rpm-pm8994-regulators", .data = &rpm_pm8994_regulators }, {} }; MODULE_DEVICE_TABLE(of, rpm_of_match);
Add Nexus 5X (msm8992) SDHCI support, including initial regulator entries to support enabling the main SDHCI/MMC. The msm8994 RPM regulator talks over SMD to the APPS processor. Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com> --- .../bindings/regulator/qcom,smd-rpm-regulator.txt | 40 ++++ .../boot/dts/qcom/msm8992-bullhead-rev-101.dts | 262 +++++++++++++++++++++ arch/arm64/boot/dts/qcom/msm8992-pins.dtsi | 82 +++++++ arch/arm64/boot/dts/qcom/msm8992.dtsi | 153 ++++++++++++ drivers/regulator/qcom_smd-regulator.c | 49 ++++ 5 files changed, 586 insertions(+)