diff mbox

[2/4] ARM64: dts: meson-gx: Add Graphic Controller nodes

Message ID 1480416469-9655-3-git-send-email-narmstrong@baylibre.com (mailing list archive)
State Superseded
Headers show

Commit Message

Neil Armstrong Nov. 29, 2016, 10:47 a.m. UTC 
Add Video Processing Unit and CVBS Output nodes, and enable CVBS on selected
boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi          | 46 ++++++++++++++++++++++
 .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts    |  4 ++
 arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi   |  4 ++
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |  8 ++++
 .../boot/dts/amlogic/meson-gxl-nexbox-a95x.dts     |  4 ++
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi         |  8 ++++
 .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts |  4 ++
 arch/arm64/boot/dts/amlogic/meson-gxm.dtsi         |  8 ++++
 8 files changed, 86 insertions(+)

Comments

Laurent Pinchart Nov. 29, 2016, 7:16 p.m. UTC | #1 
Hi Neil,

Thank you for the patch.

On Tuesday 29 Nov 2016 11:47:47 Neil Armstrong wrote:
> Add Video Processing Unit and CVBS Output nodes, and enable CVBS on selected
> boards.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gx.dtsi          | 46 +++++++++++++++++++
>  .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts    |  4 ++
>  arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi   |  4 ++
>  arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |  8 ++++
>  .../boot/dts/amlogic/meson-gxl-nexbox-a95x.dts     |  4 ++
>  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi         |  8 ++++
>  .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts |  4 ++
>  arch/arm64/boot/dts/amlogic/meson-gxm.dtsi         |  8 ++++
>  8 files changed, 86 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index fc033c0..644d5f6 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> @@ -153,6 +153,27 @@
>  		};
>  	};
> 
> +	venc_cvbs: venc-cvbs {
> +		compatible = "amlogic,meson-gx-cvbs";
> +		status = "disabled";

Still no registers here ?

> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			venc_cvbs_in: port@0 {

Nitpicking, you don't need a label here as ports are never referenced by 
phandle. Same for the vpu node below.

> +				 #address-cells = <1>;
> +				 #size-cells = <0>;
> +				 reg = <0>;
> +
> +				 venc_cvbs_in_vpu: endpoint@0 {
> +					 reg = <0>;

And there's no requirement to number the endpoint if there's a single one of 
them (but it's not forbidden either).

> +					 remote-endpoint = 
<&vpu_out_venc_cvbs>;
> +				};
> +			};
> +		};
> +	};
> +
>  	soc {
>  		compatible = "simple-bus";
>  		#address-cells = <2>;
> @@ -356,5 +377,30 @@
>  				status = "disabled";
>  			};
>  		};
> +
> +		vpu: vpu@d0100000 {
> +			compatible = "amlogic,meson-gx-vpu";
> +			reg = <0x0 0xd0100000 0x0 0x100000>,
> +			      <0x0 0xc883c000 0x0 0x1000>,
> +			      <0x0 0xc8838000 0x0 0x1000>;
> +			reg-names = "base", "hhi", "dmc";
> +			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				vpu_out: port@1 {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +					reg = <1>;
> +
> +					vpu_out_venc_cvbs: endpoint@0 {
> +						reg = <0>;
> +						remote-endpoint = 
<&venc_cvbs_in_vpu>;
> +					};
> +				};
> +			};
> +		};
>  	};
>  };
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index
> 9696820..a55d1cf 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> @@ -229,3 +229,7 @@
>  	clocks = <&clkc CLKID_FCLK_DIV4>;
>  	clock-names = "clkin0";
>  };
> +
> +&venc_cvbs {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 5e5e2de..3c09bd1
> 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> @@ -266,3 +266,7 @@
>  	clocks = <&clkc CLKID_FCLK_DIV4>;
>  	clock-names = "clkin0";
>  };
> +
> +&venc_cvbs {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index ac5ad3b..1a321c8f
> 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> @@ -506,3 +506,11 @@
>  		 <&clkc CLKID_FCLK_DIV2>;
>  	clock-names = "core", "clkin0", "clkin1";
>  };
> +
> +&venc_cvbs {
> +	compatible = "amlogic,meson-gxbb-cvbs", "amlogic,meson-gx-cvbs";
> +};
> +
> +&vpu {
> +	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
> b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts index
> e99101a..2a9b46f 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
> @@ -203,3 +203,7 @@
>  	clocks = <&clkc CLKID_FCLK_DIV4>;
>  	clock-names = "clkin0";
>  };
> +
> +&venc_cvbs {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 3af54dc..b60c5ce 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -299,3 +299,11 @@
>  		 <&clkc CLKID_FCLK_DIV2>;
>  	clock-names = "core", "clkin0", "clkin1";
>  };
> +
> +&venc_cvbs {
> +	compatible = "amlogic,meson-gxl-cvbs", "amlogic,meson-gx-cvbs";
> +};
> +
> +&vpu {
> +	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index
> d320727..1ae2451 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> @@ -167,3 +167,7 @@
>  		max-speed = <1000>;
>  	};
>  };
> +
> +&venc_cvbs {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index c1974bb..fecd8c2 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
> @@ -112,3 +112,11 @@
>  		};
>  	};
>  };
> +
> +&venc_cvbs {
> +	compatible = "amlogic,meson-gxm-cvbs", "amlogic,meson-gx-cvbs";
> +};
> +
> +&vpu {
> +	compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
> +};
Laurent Pinchart Nov. 29, 2016, 7:19 p.m. UTC | #2 
Hi Neil,

On Tuesday 29 Nov 2016 21:16:17 Laurent Pinchart wrote:
> On Tuesday 29 Nov 2016 11:47:47 Neil Armstrong wrote:
> > Add Video Processing Unit and CVBS Output nodes, and enable CVBS on
> > selected boards.
> > 
> > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> > ---
> > 
> >  arch/arm64/boot/dts/amlogic/meson-gx.dtsi          | 46 +++++++++++++++++
> >  .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts    |  4 ++
> >  arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi   |  4 ++
> >  arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |  8 ++++
> >  .../boot/dts/amlogic/meson-gxl-nexbox-a95x.dts     |  4 ++
> >  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi         |  8 ++++
> >  .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts |  4 ++
> >  arch/arm64/boot/dts/amlogic/meson-gxm.dtsi         |  8 ++++
> >  8 files changed, 86 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> > b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index fc033c0..644d5f6 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> > @@ -153,6 +153,27 @@
> >  		};
> >  	};
> > 
> > +	venc_cvbs: venc-cvbs {
> > +		compatible = "amlogic,meson-gx-cvbs";
> > +		status = "disabled";
> 
> Still no registers here ?

Or is this the internal video encoder, not the HHI VDAC ? If so, haven't we 
decided when discussing the previous version that there's no need for a DT 
node to model the video encoder as it's part of the VPU ?

> > +
> > +		ports {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +
> > +			venc_cvbs_in: port@0 {
> 
> Nitpicking, you don't need a label here as ports are never referenced by
> phandle. Same for the vpu node below.
> 
> > +				 #address-cells = <1>;
> > +				 #size-cells = <0>;
> > +				 reg = <0>;
> > +
> > +				 venc_cvbs_in_vpu: endpoint@0 {
> > +					 reg = <0>;
> 
> And there's no requirement to number the endpoint if there's a single one of
> them (but it's not forbidden either).
> 
> > +					 remote-endpoint =
> 
> <&vpu_out_venc_cvbs>;
> 
> > +				};
> > +			};
> > +		};
> > +	};
> > +
> > 
> >  	soc {

Shouldn't the above node be placed inside the soc ?

> >  		compatible = "simple-bus";
> >  		#address-cells = <2>;
> > 
> > @@ -356,5 +377,30 @@
> > 
> >  				status = "disabled";
> >  			
> >  			};
> >  		
> >  		};
> > 
> > +
> > +		vpu: vpu@d0100000 {
> > +			compatible = "amlogic,meson-gx-vpu";
> > +			reg = <0x0 0xd0100000 0x0 0x100000>,
> > +			      <0x0 0xc883c000 0x0 0x1000>,
> > +			      <0x0 0xc8838000 0x0 0x1000>;
> > +			reg-names = "base", "hhi", "dmc";
> > +			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
> > +
> > +			ports {
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +
> > +				vpu_out: port@1 {
> > +					#address-cells = <1>;
> > +					#size-cells = <0>;
> > +					reg = <1>;
> > +
> > +					vpu_out_venc_cvbs: endpoint@0 {
> > +						reg = <0>;
> > +						remote-endpoint =
> 
> <&venc_cvbs_in_vpu>;
> 
> > +					};
> > +				};
> > +			};
> > +		};
> > 
> >  	};
> >  
> >  };
> > 
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> > b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index
> > 9696820..a55d1cf 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> > @@ -229,3 +229,7 @@
> > 
> >  	clocks = <&clkc CLKID_FCLK_DIV4>;
> >  	clock-names = "clkin0";
> >  
> >  };
> > 
> > +
> > +&venc_cvbs {
> > +	status = "okay";
> > +};
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> > b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 5e5e2de..3c09bd1
> > 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> > @@ -266,3 +266,7 @@
> > 
> >  	clocks = <&clkc CLKID_FCLK_DIV4>;
> >  	clock-names = "clkin0";
> >  
> >  };
> > 
> > +
> > +&venc_cvbs {
> > +	status = "okay";
> > +};
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> > b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index ac5ad3b..1a321c8f
> > 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> > @@ -506,3 +506,11 @@
> > 
> >  		 <&clkc CLKID_FCLK_DIV2>;
> >  	
> >  	clock-names = "core", "clkin0", "clkin1";
> >  
> >  };
> > 
> > +
> > +&venc_cvbs {
> > +	compatible = "amlogic,meson-gxbb-cvbs", "amlogic,meson-gx-cvbs";
> > +};
> > +
> > +&vpu {
> > +	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
> > +};
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
> > b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts index
> > e99101a..2a9b46f 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
> > @@ -203,3 +203,7 @@
> > 
> >  	clocks = <&clkc CLKID_FCLK_DIV4>;
> >  	clock-names = "clkin0";
> >  
> >  };
> > 
> > +
> > +&venc_cvbs {
> > +	status = "okay";
> > +};
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> > b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 3af54dc..b60c5ce 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> > @@ -299,3 +299,11 @@
> > 
> >  		 <&clkc CLKID_FCLK_DIV2>;
> >  	
> >  	clock-names = "core", "clkin0", "clkin1";
> >  
> >  };
> > 
> > +
> > +&venc_cvbs {
> > +	compatible = "amlogic,meson-gxl-cvbs", "amlogic,meson-gx-cvbs";
> > +};
> > +
> > +&vpu {
> > +	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
> > +};
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> > b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index
> > d320727..1ae2451 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> > @@ -167,3 +167,7 @@
> > 
> >  		max-speed = <1000>;
> >  	
> >  	};
> >  
> >  };
> > 
> > +
> > +&venc_cvbs {
> > +	status = "okay";
> > +};
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
> > b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index c1974bb..fecd8c2 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
> > @@ -112,3 +112,11 @@
> > 
> >  		};
> >  	
> >  	};
> >  
> >  };
> > 
> > +
> > +&venc_cvbs {
> > +	compatible = "amlogic,meson-gxm-cvbs", "amlogic,meson-gx-cvbs";
> > +};
> > +
> > +&vpu {
> > +	compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
> > +};
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index fc033c0..644d5f6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -153,6 +153,27 @@ 
 		};
 	};
 
+	venc_cvbs: venc-cvbs {
+		compatible = "amlogic,meson-gx-cvbs";
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			venc_cvbs_in: port@0 {
+				 #address-cells = <1>;
+				 #size-cells = <0>;
+				 reg = <0>;
+
+				 venc_cvbs_in_vpu: endpoint@0 {
+					 reg = <0>;
+					 remote-endpoint = <&vpu_out_venc_cvbs>;
+				};
+			};
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -356,5 +377,30 @@ 
 				status = "disabled";
 			};
 		};
+
+		vpu: vpu@d0100000 {
+			compatible = "amlogic,meson-gx-vpu";
+			reg = <0x0 0xd0100000 0x0 0x100000>,
+			      <0x0 0xc883c000 0x0 0x1000>,
+			      <0x0 0xc8838000 0x0 0x1000>;
+			reg-names = "base", "hhi", "dmc";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				vpu_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					vpu_out_venc_cvbs: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&venc_cvbs_in_vpu>;
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 9696820..a55d1cf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -229,3 +229,7 @@ 
 	clocks = <&clkc CLKID_FCLK_DIV4>;
 	clock-names = "clkin0";
 };
+
+&venc_cvbs {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index 5e5e2de..3c09bd1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -266,3 +266,7 @@ 
 	clocks = <&clkc CLKID_FCLK_DIV4>;
 	clock-names = "clkin0";
 };
+
+&venc_cvbs {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index ac5ad3b..1a321c8f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -506,3 +506,11 @@ 
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };
+
+&venc_cvbs {
+	compatible = "amlogic,meson-gxbb-cvbs", "amlogic,meson-gx-cvbs";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
index e99101a..2a9b46f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
@@ -203,3 +203,7 @@ 
 	clocks = <&clkc CLKID_FCLK_DIV4>;
 	clock-names = "clkin0";
 };
+
+&venc_cvbs {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 3af54dc..b60c5ce 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -299,3 +299,11 @@ 
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };
+
+&venc_cvbs {
+	compatible = "amlogic,meson-gxl-cvbs", "amlogic,meson-gx-cvbs";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index d320727..1ae2451 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -167,3 +167,7 @@ 
 		max-speed = <1000>;
 	};
 };
+
+&venc_cvbs {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index c1974bb..fecd8c2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -112,3 +112,11 @@ 
 		};
 	};
 };
+
+&venc_cvbs {
+	compatible = "amlogic,meson-gxm-cvbs", "amlogic,meson-gx-cvbs";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
+};