| Message ID | 20161209205508.6456-1-grygorii.strashko@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Grygorii Strashko <grygorii.strashko@ti.com> [161209 12:55]: > Switch back from devm_request_threaded_irq() to request_threaded_irq() to > avoid races between interrupt handler execution and PM runtime in error > handling code path in probe and in dwc3_omap_remove(): Can't you just call disable_irq() on the exit path instead of removing devm? Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/09/2016 03:59 PM, Tony Lindgren wrote: > * Grygorii Strashko <grygorii.strashko@ti.com> [161209 12:55]: >> Switch back from devm_request_threaded_irq() to request_threaded_irq() to >> avoid races between interrupt handler execution and PM runtime in error >> handling code path in probe and in dwc3_omap_remove(): > > Can't you just call disable_irq() on the exit path instead of removing > devm? > I can. But what will be the benefit from using devm then?
* Grygorii Strashko <grygorii.strashko@ti.com> [161209 14:46]: > > > On 12/09/2016 03:59 PM, Tony Lindgren wrote: > > * Grygorii Strashko <grygorii.strashko@ti.com> [161209 12:55]: > > > Switch back from devm_request_threaded_irq() to request_threaded_irq() to > > > avoid races between interrupt handler execution and PM runtime in error > > > handling code path in probe and in dwc3_omap_remove(): > > > > Can't you just call disable_irq() on the exit path instead of removing > > devm? > > > > I can. But what will be the benefit from using devm then? Hmm good point. Probably the least number of code would be to just do NOAUTOEN before devm_request_irq(), then only do enable_irq() just before returning from the probe. After all, we don't really want the irq running until the probe is done. I think that would leave out the extra handling from the error path? Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/09/2016 05:04 PM, Tony Lindgren wrote: > * Grygorii Strashko <grygorii.strashko@ti.com> [161209 14:46]: >> >> >> On 12/09/2016 03:59 PM, Tony Lindgren wrote: >>> * Grygorii Strashko <grygorii.strashko@ti.com> [161209 12:55]: >>>> Switch back from devm_request_threaded_irq() to request_threaded_irq() to >>>> avoid races between interrupt handler execution and PM runtime in error >>>> handling code path in probe and in dwc3_omap_remove(): >>> >>> Can't you just call disable_irq() on the exit path instead of removing >>> devm? >>> >> >> I can. But what will be the benefit from using devm then? > > Hmm good point. Probably the least number of code would be to just > do NOAUTOEN before devm_request_irq(), then only do enable_irq() > just before returning from the probe. After all, we don't really > want the irq running until the probe is done. > > I think that would leave out the extra handling from the error > path? > Good question here is - do we need this irq to be enabled for sub-device probing from of_platform_populate()? ;)
* Grygorii Strashko <grygorii.strashko@ti.com> [161209 15:32]: > > > On 12/09/2016 05:04 PM, Tony Lindgren wrote: > > * Grygorii Strashko <grygorii.strashko@ti.com> [161209 14:46]: > >> > >> > >> On 12/09/2016 03:59 PM, Tony Lindgren wrote: > >>> * Grygorii Strashko <grygorii.strashko@ti.com> [161209 12:55]: > >>>> Switch back from devm_request_threaded_irq() to request_threaded_irq() to > >>>> avoid races between interrupt handler execution and PM runtime in error > >>>> handling code path in probe and in dwc3_omap_remove(): > >>> > >>> Can't you just call disable_irq() on the exit path instead of removing > >>> devm? > >>> > >> > >> I can. But what will be the benefit from using devm then? > > > > Hmm good point. Probably the least number of code would be to just > > do NOAUTOEN before devm_request_irq(), then only do enable_irq() > > just before returning from the probe. After all, we don't really > > want the irq running until the probe is done. > > > > I think that would leave out the extra handling from the error > > path? > > > > Good question here is - do we need this irq to be enabled for sub-device > probing from of_platform_populate()? ;) No! Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/09/2016 05:37 PM, Tony Lindgren wrote: > * Grygorii Strashko <grygorii.strashko@ti.com> [161209 15:32]: >> >> >> On 12/09/2016 05:04 PM, Tony Lindgren wrote: >>> * Grygorii Strashko <grygorii.strashko@ti.com> [161209 14:46]: >>>> >>>> >>>> On 12/09/2016 03:59 PM, Tony Lindgren wrote: >>>>> * Grygorii Strashko <grygorii.strashko@ti.com> [161209 12:55]: >>>>>> Switch back from devm_request_threaded_irq() to request_threaded_irq() to >>>>>> avoid races between interrupt handler execution and PM runtime in error >>>>>> handling code path in probe and in dwc3_omap_remove(): >>>>> >>>>> Can't you just call disable_irq() on the exit path instead of removing >>>>> devm? >>>>> >>>> >>>> I can. But what will be the benefit from using devm then? >>> >>> Hmm good point. Probably the least number of code would be to just >>> do NOAUTOEN before devm_request_irq(), then only do enable_irq() >>> just before returning from the probe. After all, we don't really >>> want the irq running until the probe is done. >>> >>> I think that would leave out the extra handling from the error >>> path? >>> >> >> Good question here is - do we need this irq to be enabled for sub-device >> probing from of_platform_populate()? ;) > > No! Ok, then it should work this way.
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index 29e80cc..79d74f6 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -511,18 +511,18 @@ static int dwc3_omap_probe(struct platform_device *pdev) /* check the DMA Status */ reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG); - ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt, - dwc3_omap_interrupt_thread, IRQF_SHARED, - "dwc3-omap", omap); + ret = request_threaded_irq(omap->irq, dwc3_omap_interrupt, + dwc3_omap_interrupt_thread, IRQF_SHARED, + "dwc3-omap", omap); if (ret) { dev_err(dev, "failed to request IRQ #%d --> %d\n", omap->irq, ret); - goto err1; + goto err11; } ret = dwc3_omap_extcon_register(omap); if (ret < 0) - goto err1; + goto err11; ret = of_platform_populate(node, NULL, NULL, dev); if (ret) { @@ -538,6 +538,8 @@ static int dwc3_omap_probe(struct platform_device *pdev) extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb); extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb); +err11: + free_irq(omap->irq, omap); err1: pm_runtime_put_sync(dev); pm_runtime_disable(dev); @@ -552,6 +554,7 @@ static int dwc3_omap_remove(struct platform_device *pdev) extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb); extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb); dwc3_omap_disable_irqs(omap); + free_irq(omap->irq, omap); of_platform_depopulate(omap->dev); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev);
Switch back from devm_request_threaded_irq() to request_threaded_irq() to avoid races between interrupt handler execution and PM runtime in error handling code path in probe and in dwc3_omap_remove(): in probe: ... err1: pm_runtime_put_sync(dev); ^^ PM runtime can race with IRQ handler when deferred probing happening due to extcon pm_runtime_disable(dev); return ret; in dwc3_omap_remove: ... dwc3_omap_disable_irqs(omap); ^^ IRQs are disabled in HW, but handler may still run of_platform_depopulate(omap->dev); pm_runtime_put_sync(&pdev->dev); ^^ PM runtime can race with IRQ handler pm_runtime_disable(&pdev->dev); return 0; So, OMAP DWC3 IRQ need to be disabled end freed before calling pm_runtime_put() in probe and in dwc3_omap_remove(). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- Hi Tony, This is reworked patch, so might be it need to be re-tested. drivers/usb/dwc3/dwc3-omap.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)