diff mbox

[1/3] ARM: OMAP1: USB: tidy up logging output

Message ID 20170102205705.19001-1-aaro.koskinen@iki.fi (mailing list archive)
State New, archived
Headers show

Commit Message

Aaro Koskinen Jan. 2, 2017, 8:57 p.m. UTC 
KERN_CONT/pr_cont is now required to continue log messages, use that.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
---
 arch/arm/mach-omap1/usb.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

Comments

Tony Lindgren Jan. 5, 2017, 5:35 p.m. UTC | #1 
* Aaro Koskinen <aaro.koskinen@iki.fi> [170102 12:58]:
> KERN_CONT/pr_cont is now required to continue log messages, use that.

Applying all into omap-for-v4.11/omap1 thanks.

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 2506e59..d4aa118 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -95,17 +95,17 @@  omap_otg_init(struct omap_usb_config *config)
 
 	printk("USB: hmc %d", config->hmc_mode);
 	if (!alt_pingroup)
-		printk(", usb2 alt %d wires", config->pins[2]);
+		pr_cont(", usb2 alt %d wires", config->pins[2]);
 	else if (config->pins[0])
-		printk(", usb0 %d wires%s", config->pins[0],
+		pr_cont(", usb0 %d wires%s", config->pins[0],
 			is_usb0_device(config) ? " (dev)" : "");
 	if (config->pins[1])
-		printk(", usb1 %d wires", config->pins[1]);
+		pr_cont(", usb1 %d wires", config->pins[1]);
 	if (!alt_pingroup && config->pins[2])
-		printk(", usb2 %d wires", config->pins[2]);
+		pr_cont(", usb2 %d wires", config->pins[2]);
 	if (config->otg)
-		printk(", Mini-AB on usb%d", config->otg - 1);
-	printk("\n");
+		pr_cont(", Mini-AB on usb%d", config->otg - 1);
+	pr_cont("\n");
 
 	if (cpu_class_is_omap1()) {
 		u16 w;
@@ -573,13 +573,13 @@  static void __init omap_1510_usb_init(struct omap_usb_config *config)
 
 	printk("USB: hmc %d", config->hmc_mode);
 	if (config->pins[0])
-		printk(", usb0 %d wires%s", config->pins[0],
+		pr_cont(", usb0 %d wires%s", config->pins[0],
 			is_usb0_device(config) ? " (dev)" : "");
 	if (config->pins[1])
-		printk(", usb1 %d wires", config->pins[1]);
+		pr_cont(", usb1 %d wires", config->pins[1]);
 	if (config->pins[2])
-		printk(", usb2 %d wires", config->pins[2]);
-	printk("\n");
+		pr_cont(", usb2 %d wires", config->pins[2]);
+	pr_cont("\n");
 
 	/* use DPLL for 48 MHz function clock */
 	pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),