diff mbox

[02/17] arm: at91: convert old leds drivers to gpio_led and led_trigger drivers

Message ID 1309955687-19365-3-git-send-email-bryan.wu@canonical.com (mailing list archive)
State New, archived
Headers show

Commit Message

Bryan Wu July 6, 2011, 12:34 p.m. UTC
Build with at91 defconfigs successfully

Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/board-cap9adk.c      |   21 ++++++-
 arch/arm/mach-at91/board-csb337.c       |    3 -
 arch/arm/mach-at91/board-ecbat91.c      |   18 +++++-
 arch/arm/mach-at91/board-eco920.c       |   23 ++++++-
 arch/arm/mach-at91/board-kafa.c         |   17 ++++-
 arch/arm/mach-at91/board-kb9202.c       |   23 ++++++-
 arch/arm/mach-at91/board-rm9200dk.c     |    3 -
 arch/arm/mach-at91/board-rm9200ek.c     |    3 -
 arch/arm/mach-at91/board-sam9-l9260.c   |   23 ++++++-
 arch/arm/mach-at91/board-sam9261ek.c    |    3 -
 arch/arm/mach-at91/board-yl-9200.c      |    3 -
 arch/arm/mach-at91/include/mach/board.h |    1 -
 arch/arm/mach-at91/leds.c               |  105 -------------------------------
 13 files changed, 108 insertions(+), 138 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index cdb65d4..7a6a32b 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -55,8 +55,6 @@  static void __init cap9adk_init_early(void)
 	/* Initialize processor: 12 MHz crystal */
 	at91cap9_initialize(12000000);
 
-	/* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
-	at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);
 	/* ... POWER LED always on */
 	at91_set_gpio_output(AT91_PIN_PC29, 1);
 
@@ -365,6 +363,23 @@  static struct ac97c_platform_data cap9adk_ac97_data = {
 //	.reset_pin	= ... not connected
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led cap9adk_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PA10,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* D2 */
+		.name			= "led2",
+		.gpio			= AT91_PIN_PA11,
+		.active_low		= 1,
+		.default_trigger	= "timer",
+	}
+};
 
 static void __init cap9adk_board_init(void)
 {
@@ -392,6 +407,8 @@  static void __init cap9adk_board_init(void)
 	at91_add_device_lcdc(&cap9adk_lcdc_data);
 	/* AC97 */
 	at91_add_device_ac97(&cap9adk_ac97_data);
+	/* LEDs */
+	at91_gpio_leds(cap9adk_leds, ARRAY_SIZE(cap9adk_leds));
 }
 
 MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index d98bcec..da3fb48 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -48,9 +48,6 @@  static void __init csb337_init_early(void)
 	/* Initialize processor: 3.6864 MHz crystal */
 	at91rm9200_initialize(3686400);
 
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
 	/* DBGU on ttyS0 */
 	at91_register_uart(0, 0, 0);
 
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index a6f57fa..e82d024 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -51,9 +51,6 @@  static void __init ecb_at91init_early(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91rm9200_initialize(18432000);
 
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
@@ -149,6 +146,18 @@  static struct spi_board_info __initdata ecb_at91spi_devices[] = {
 	},
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led ecb_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PC7,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	}
+};
+
 static void __init ecb_at91board_init(void)
 {
 	/* Serial */
@@ -168,6 +177,9 @@  static void __init ecb_at91board_init(void)
 
 	/* SPI */
 	at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
+
+	/* LEDs */
+	at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds));
 }
 
 MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index bfc0062..60fd9e6 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -37,9 +37,6 @@  static void __init eco920_init_early(void)
 
 	at91rm9200_initialize(18432000);
 
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
 	/* DBGU on ttyS0. (Rx & Tx only */
 	at91_register_uart(0, 0, 0);
 
@@ -100,6 +97,24 @@  static struct spi_board_info eco920_spi_devices[] = {
 	},
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led eco920_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PB0,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* D2 */
+		.name			= "led2",
+		.gpio			= AT91_PIN_PB1,
+		.active_low		= 1,
+		.default_trigger	= "timer",
+	}
+};
+
 static void __init eco920_board_init(void)
 {
 	at91_add_device_serial();
@@ -130,6 +145,8 @@  static void __init eco920_board_init(void)
 	);
 
 	at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
+	/* LEDs */
+	at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds));
 }
 
 MACHINE_START(ECO920, "eco920")
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 9b003ff..5a46902 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -48,9 +48,6 @@  static void __init kafa_init_early(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91rm9200_initialize(18432000);
 
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
@@ -80,6 +77,18 @@  static struct at91_udc_data __initdata kafa_udc_data = {
 	.pullup_pin	= AT91_PIN_PB7,
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led kafa_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PB4,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+};
+
 static void __init kafa_board_init(void)
 {
 	/* Serial */
@@ -94,6 +103,8 @@  static void __init kafa_board_init(void)
 	at91_add_device_i2c(NULL, 0);
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
+	/* LEDs */
+	at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds));
 }
 
 MACHINE_START(KAFA, "Sperry-Sun KAFA")
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index a813a74..1a62283 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -50,9 +50,6 @@  static void __init kb9202_init_early(void)
 	/* Initialize processor: 10 MHz crystal */
 	at91rm9200_initialize(10000000);
 
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
@@ -117,6 +114,24 @@  static struct atmel_nand_data __initdata kb9202_nand_data = {
 	.partition_info	= nand_partitions,
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led kb9202_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PC19,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* D2 */
+		.name			= "led2",
+		.gpio			= AT91_PIN_PC18,
+		.active_low		= 1,
+		.default_trigger	= "timer",
+	}
+};
+
 static void __init kb9202_board_init(void)
 {
 	/* Serial */
@@ -135,6 +150,8 @@  static void __init kb9202_board_init(void)
 	at91_add_device_spi(NULL, 0);
 	/* NAND */
 	at91_add_device_nand(&kb9202_nand_data);
+	/* LEDs */
+	at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds));
 }
 
 MACHINE_START(KB9200, "KB920x")
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index aef9627..029e487 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -50,9 +50,6 @@  static void __init dk_init_early(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91rm9200_initialize(18432000);
 
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 015a021..0452f85 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -50,9 +50,6 @@  static void __init ek_init_early(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91rm9200_initialize(18432000);
 
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index aaf1bf0..a4c2de3 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -49,9 +49,6 @@  static void __init ek_init_early(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
 
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
@@ -190,6 +187,24 @@  static struct at91_mmc_data __initdata ek_mmc_data = {
 //	.vcc_pin	= ... not connected
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PA9,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* D2 */
+		.name			= "led2",
+		.gpio			= AT91_PIN_PA6,
+		.active_low		= 1,
+		.default_trigger	= "timer",
+	}
+};
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -208,6 +223,8 @@  static void __init ek_board_init(void)
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
 MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index b60c22b..00cc106 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -59,9 +59,6 @@  static void __init ek_init_early(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9261_initialize(18432000);
 
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index c208cc3..8a905a7 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -58,9 +58,6 @@  static void __init yl9200_init_early(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91rm9200_initialize(18432000);
 
-	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
-	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index ed544a0..c2a7746 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -200,7 +200,6 @@  struct at91_can_data {
 extern void __init at91_add_device_can(struct at91_can_data *data);
 
  /* LEDs */
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
 extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
 extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
 
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 0415a839..844aef8 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -90,108 +90,3 @@  void __init at91_pwm_leds(struct gpio_led *leds, int nr)
 #else
 void __init at91_pwm_leds(struct gpio_led *leds, int nr){}
 #endif
-
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-
-#include <asm/leds.h>
-
-/*
- * Old ARM-specific LED framework; not fully functional when generic time is
- * in use.
- */
-
-static u8 at91_leds_cpu;
-static u8 at91_leds_timer;
-
-static inline void at91_led_on(unsigned int led)
-{
-	at91_set_gpio_value(led, 0);
-}
-
-static inline void at91_led_off(unsigned int led)
-{
-	at91_set_gpio_value(led, 1);
-}
-
-static inline void at91_led_toggle(unsigned int led)
-{
-	unsigned long is_off = at91_get_gpio_value(led);
-	if (is_off)
-		at91_led_on(led);
-	else
-		at91_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void at91_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-	case led_start:		/* System startup */
-		at91_led_on(at91_leds_cpu);
-		break;
-
-	case led_stop:		/* System stop / suspend */
-		at91_led_off(at91_leds_cpu);
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:		/* Every 50 timer ticks */
-		at91_led_toggle(at91_leds_timer);
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:	/* Entering idle state */
-		at91_led_off(at91_leds_cpu);
-		break;
-
-	case led_idle_end:	/* Exit idle state */
-		at91_led_on(at91_leds_cpu);
-		break;
-#endif
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
-	if (!at91_leds_timer || !at91_leds_cpu)
-		return -ENODEV;
-
-	leds_event = at91_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(leds_init);
-
-
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-{
-	/* Enable GPIO to access the LEDs */
-	at91_set_gpio_output(cpu_led, 1);
-	at91_set_gpio_output(timer_led, 1);
-
-	at91_leds_cpu	= cpu_led;
-	at91_leds_timer	= timer_led;
-}
-
-#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif