diff mbox

[v7,3/4] drm/panel: Add support for S6E3HA2 panel driver on TM2 board

Message ID 1483611609-23522-4-git-send-email-hoegeun.kwon@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Hoegeun Kwon Jan. 5, 2017, 10:20 a.m. UTC
This patch add support for MIPI-DSI based S6E3HA2 AMOLED panel
driver. This panel has 1440x2560 resolution in 5.7-inch physical
panel in the TM2 device.

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
---
 .../bindings/display/panel/samsung,s6e3ha2.txt     |  28 +
 drivers/gpu/drm/panel/Kconfig                      |   6 +
 drivers/gpu/drm/panel/Makefile                     |   1 +
 drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c      | 754 +++++++++++++++++++++
 4 files changed, 789 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
 create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c

Comments

Krzysztof Kozlowski Jan. 5, 2017, 6:09 p.m. UTC | #1
On Thu, Jan 5, 2017 at 12:20 PM, Hoegeun Kwon <hoegeun.kwon@samsung.com> wrote:
> This patch add support for MIPI-DSI based S6E3HA2 AMOLED panel
> driver. This panel has 1440x2560 resolution in 5.7-inch physical
> panel in the TM2 device.
>
> Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
> Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
> ---
>  .../bindings/display/panel/samsung,s6e3ha2.txt     |  28 +
>  drivers/gpu/drm/panel/Kconfig                      |   6 +
>  drivers/gpu/drm/panel/Makefile                     |   1 +
>  drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c      | 754 +++++++++++++++++++++
>  4 files changed, 789 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
>  create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
>
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
> new file mode 100644
> index 0000000..da4c291

This should be a separate patch, preferably first one in the series. See:
Documentation/devicetree/bindings/submitting-patches.txt
Since you already got reviews and tests, I think you can retain them
in both patches (so dt-bindings patch will have reviewed-by-Andrzej
and the code will have review+tested).

Best regards,
Krzysztof
Andi Shyti Jan. 6, 2017, 5:22 a.m. UTC | #2
Hi Hoegeun,

> +static const struct drm_display_mode default_mode = {
> +	.clock = 222372,
> +	.hdisplay = 1440,
> +	.hsync_start = 1440 + 1,
> +	.hsync_end = 1440 + 1 + 1,
> +	.htotal = 1440 + 1 + 1 + 1,
> +	.vdisplay = 2560,
> +	.vsync_start = 2560 + 1,
> +	.vsync_end = 2560 + 1 + 1,
> +	.vtotal = 2560 + 1 + 1 + 15,
> +	.vrefresh = 60,
> +	.flags = 0,
> +};

how is this working with tm2e? Are these values valid for both
the boards?

Andi
Inki Dae Jan. 6, 2017, 5:32 a.m. UTC | #3
2017년 01월 06일 14:22에 Andi Shyti 이(가) 쓴 글:
> Hi Hoegeun,
> 
>> +static const struct drm_display_mode default_mode = {
>> +	.clock = 222372,
>> +	.hdisplay = 1440,
>> +	.hsync_start = 1440 + 1,
>> +	.hsync_end = 1440 + 1 + 1,
>> +	.htotal = 1440 + 1 + 1 + 1,
>> +	.vdisplay = 2560,
>> +	.vsync_start = 2560 + 1,
>> +	.vsync_end = 2560 + 1 + 1,
>> +	.vtotal = 2560 + 1 + 1 + 15,
>> +	.vrefresh = 60,
>> +	.flags = 0,
>> +};
> 
> how is this working with tm2e? Are these values valid for both
> the boards?

We don't need to consider tm2e board with two reasones,
1. there is no tm2e board support in mainline
2. the panel on tm2 would be a little bit different from one on tm2e

Thanks,
Inki Dae

> 
> Andi
> 
>
Andi Shyti Jan. 6, 2017, 8:18 a.m. UTC | #4
Hi Inki,

Thanks for the reply, but...

> >> +static const struct drm_display_mode default_mode = {
> >> +	.clock = 222372,
> >> +	.hdisplay = 1440,
> >> +	.hsync_start = 1440 + 1,
> >> +	.hsync_end = 1440 + 1 + 1,
> >> +	.htotal = 1440 + 1 + 1 + 1,
> >> +	.vdisplay = 2560,
> >> +	.vsync_start = 2560 + 1,
> >> +	.vsync_end = 2560 + 1 + 1,
> >> +	.vtotal = 2560 + 1 + 1 + 15,
> >> +	.vrefresh = 60,
> >> +	.flags = 0,
> >> +};
> > 
> > how is this working with tm2e? Are these values valid for both
> > the boards?
> 
> We don't need to consider tm2e board with two reasones,
> 1. there is no tm2e board support in mainline
> 2. the panel on tm2 would be a little bit different from one on tm2e

... this display in the Tizen Kernel is supported by both:
tm2 [1] and tm2e [2]. The only differences are:

TM2:
   clock-frequency = <14874444>;
   hactive = <1440>;

TM2E:
   clock-frequency = <16523724>;
   hactive = <1600>;

I don't know much about the differences you mention in point 2,
but it's a pity to drop support only because we don't want to put
in the dts the 'hactive', and 'clock-frequency' properties.

Andi

[1] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts?h=tizen#n1284
[2] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts?h=tizen#n1270
Inki Dae Jan. 6, 2017, 8:36 a.m. UTC | #5
2017년 01월 06일 17:18에 Andi Shyti 이(가) 쓴 글:
> Hi Inki,
> 
> Thanks for the reply, but...
> 
>>>> +static const struct drm_display_mode default_mode = {
>>>> +	.clock = 222372,
>>>> +	.hdisplay = 1440,
>>>> +	.hsync_start = 1440 + 1,
>>>> +	.hsync_end = 1440 + 1 + 1,
>>>> +	.htotal = 1440 + 1 + 1 + 1,
>>>> +	.vdisplay = 2560,
>>>> +	.vsync_start = 2560 + 1,
>>>> +	.vsync_end = 2560 + 1 + 1,
>>>> +	.vtotal = 2560 + 1 + 1 + 15,
>>>> +	.vrefresh = 60,
>>>> +	.flags = 0,
>>>> +};
>>>
>>> how is this working with tm2e? Are these values valid for both
>>> the boards?
>>
>> We don't need to consider tm2e board with two reasones,
>> 1. there is no tm2e board support in mainline
>> 2. the panel on tm2 would be a little bit different from one on tm2e
> 
> ... this display in the Tizen Kernel is supported by both:
> tm2 [1] and tm2e [2]. The only differences are:

Why tm2e dts file is in mainline? Seems communication miss with Chanwoo. :( 

> 
> TM2:
>    clock-frequency = <14874444>;
>    hactive = <1440>;
> 
> TM2E:
>    clock-frequency = <16523724>;
>    hactive = <1600>;
> 
> I don't know much about the differences you mention in point 2,
> but it's a pity to drop support only because we don't want to put
> in the dts the 'hactive', and 'clock-frequency' properties.

Anyway, tm2e board is already in mainline so Panel driver may need to identify what kinds of panel is probed to decide porch values. I think there are relevant registers in MCU of the Panel device to check version or similar thing.

Thanks.

> 
> Andi
> 
> [1] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts?h=tizen#n1284
> [2] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts?h=tizen#n1270
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> .
>
Andrzej Hajda Jan. 9, 2017, 7:37 a.m. UTC | #6
On 06.01.2017 09:36, Inki Dae wrote:
>
> 2017년 01월 06일 17:18에 Andi Shyti 이(가) 쓴 글:
>> Hi Inki,
>>
>> Thanks for the reply, but...
>>
>>>>> +static const struct drm_display_mode default_mode = {
>>>>> +	.clock = 222372,
>>>>> +	.hdisplay = 1440,
>>>>> +	.hsync_start = 1440 + 1,
>>>>> +	.hsync_end = 1440 + 1 + 1,
>>>>> +	.htotal = 1440 + 1 + 1 + 1,
>>>>> +	.vdisplay = 2560,
>>>>> +	.vsync_start = 2560 + 1,
>>>>> +	.vsync_end = 2560 + 1 + 1,
>>>>> +	.vtotal = 2560 + 1 + 1 + 15,
>>>>> +	.vrefresh = 60,
>>>>> +	.flags = 0,
>>>>> +};
>>>> how is this working with tm2e? Are these values valid for both
>>>> the boards?
>>> We don't need to consider tm2e board with two reasones,
>>> 1. there is no tm2e board support in mainline
>>> 2. the panel on tm2 would be a little bit different from one on tm2e
>> ... this display in the Tizen Kernel is supported by both:
>> tm2 [1] and tm2e [2]. The only differences are:
> Why tm2e dts file is in mainline? Seems communication miss with Chanwoo. :( 
>
>> TM2:
>>    clock-frequency = <14874444>;
>>    hactive = <1440>;
>>
>> TM2E:
>>    clock-frequency = <16523724>;
>>    hactive = <1600>;
>>
>> I don't know much about the differences you mention in point 2,
>> but it's a pity to drop support only because we don't want to put
>> in the dts the 'hactive', and 'clock-frequency' properties.
> Anyway, tm2e board is already in mainline so Panel driver may need to identify what kinds of panel is probed to decide porch values. I think there are relevant registers in MCU of the Panel device to check version or similar thing.

I think we can safely use different compatible string for tm2e - it uses
different display IC controller - s6e3hf2, driver will provide timings
based on it.
As far as I examined available specs/docs there is no reliable register
which can be used to safely distinguish it on runtime, but the docs I
have are far from completeness.

Regards
Andrzej

>
> Thanks.
>
>> Andi
>>
>> [1] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts?h=tizen#n1284
>> [2] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts?h=tizen#n1270
>> --
>> To unsubscribe from this list: send the line "unsubscribe devicetree" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>> .
>>
>
Inki Dae Jan. 9, 2017, 9:19 a.m. UTC | #7
2017년 01월 09일 16:37에 Andrzej Hajda 이(가) 쓴 글:
> On 06.01.2017 09:36, Inki Dae wrote:
>>
>> 2017년 01월 06일 17:18에 Andi Shyti 이(가) 쓴 글:
>>> Hi Inki,
>>>
>>> Thanks for the reply, but...
>>>
>>>>>> +static const struct drm_display_mode default_mode = {
>>>>>> +	.clock = 222372,
>>>>>> +	.hdisplay = 1440,
>>>>>> +	.hsync_start = 1440 + 1,
>>>>>> +	.hsync_end = 1440 + 1 + 1,
>>>>>> +	.htotal = 1440 + 1 + 1 + 1,
>>>>>> +	.vdisplay = 2560,
>>>>>> +	.vsync_start = 2560 + 1,
>>>>>> +	.vsync_end = 2560 + 1 + 1,
>>>>>> +	.vtotal = 2560 + 1 + 1 + 15,
>>>>>> +	.vrefresh = 60,
>>>>>> +	.flags = 0,
>>>>>> +};
>>>>> how is this working with tm2e? Are these values valid for both
>>>>> the boards?
>>>> We don't need to consider tm2e board with two reasones,
>>>> 1. there is no tm2e board support in mainline
>>>> 2. the panel on tm2 would be a little bit different from one on tm2e
>>> ... this display in the Tizen Kernel is supported by both:
>>> tm2 [1] and tm2e [2]. The only differences are:
>> Why tm2e dts file is in mainline? Seems communication miss with Chanwoo. :( 
>>
>>> TM2:
>>>    clock-frequency = <14874444>;
>>>    hactive = <1440>;
>>>
>>> TM2E:
>>>    clock-frequency = <16523724>;
>>>    hactive = <1600>;
>>>
>>> I don't know much about the differences you mention in point 2,
>>> but it's a pity to drop support only because we don't want to put
>>> in the dts the 'hactive', and 'clock-frequency' properties.
>> Anyway, tm2e board is already in mainline so Panel driver may need to identify what kinds of panel is probed to decide porch values. I think there are relevant registers in MCU of the Panel device to check version or similar thing.
> 
> I think we can safely use different compatible string for tm2e - it uses
> different display IC controller - s6e3hf2, driver will provide timings
> based on it.

Using compatable string wouldn't be a good idea because Panel is a device not specific to board.

> As far as I examined available specs/docs there is no reliable register
> which can be used to safely distinguish it on runtime, but the docs I
> have are far from completeness.

The data sheet I am seeing says a RDDIDS register describes manufacturer and module version information. With this we could identify the Panel device.
Of course, we may need to check the register has really different values according to board.

Below is the version information Hoegeun checked,

TM2
[    4.908666] panel_s6e3ha2 13900000.dsi.0: Manufacture date: 2014-10-31 06:41
[    5.035768] panel_s6e3ha2 13900000.dsi.0: Id: 50 20 09

TM2e
[    4.929265] panel_s6e3ha2 13900000.dsi.0: Manufacture date: 2014-09-03 06:30
[    5.056287] panel_s6e3ha2 13900000.dsi.0: Id: 40 40 14


Thanks.

> 
> Regards
> Andrzej
> 
>>
>> Thanks.
>>
>>> Andi
>>>
>>> [1] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts?h=tizen#n1284
>>> [2] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts?h=tizen#n1270
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe devicetree" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>
>>> .
>>>
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
>
Andrzej Hajda Jan. 9, 2017, 9:53 a.m. UTC | #8
On 09.01.2017 10:19, Inki Dae wrote:
>
> 2017년 01월 09일 16:37에 Andrzej Hajda 이(가) 쓴 글:
>> On 06.01.2017 09:36, Inki Dae wrote:
>>> 2017년 01월 06일 17:18에 Andi Shyti 이(가) 쓴 글:
>>>> Hi Inki,
>>>>
>>>> Thanks for the reply, but...
>>>>
>>>>>>> +static const struct drm_display_mode default_mode = {
>>>>>>> +	.clock = 222372,
>>>>>>> +	.hdisplay = 1440,
>>>>>>> +	.hsync_start = 1440 + 1,
>>>>>>> +	.hsync_end = 1440 + 1 + 1,
>>>>>>> +	.htotal = 1440 + 1 + 1 + 1,
>>>>>>> +	.vdisplay = 2560,
>>>>>>> +	.vsync_start = 2560 + 1,
>>>>>>> +	.vsync_end = 2560 + 1 + 1,
>>>>>>> +	.vtotal = 2560 + 1 + 1 + 15,
>>>>>>> +	.vrefresh = 60,
>>>>>>> +	.flags = 0,
>>>>>>> +};
>>>>>> how is this working with tm2e? Are these values valid for both
>>>>>> the boards?
>>>>> We don't need to consider tm2e board with two reasones,
>>>>> 1. there is no tm2e board support in mainline
>>>>> 2. the panel on tm2 would be a little bit different from one on tm2e
>>>> ... this display in the Tizen Kernel is supported by both:
>>>> tm2 [1] and tm2e [2]. The only differences are:
>>> Why tm2e dts file is in mainline? Seems communication miss with Chanwoo. :( 
>>>
>>>> TM2:
>>>>    clock-frequency = <14874444>;
>>>>    hactive = <1440>;
>>>>
>>>> TM2E:
>>>>    clock-frequency = <16523724>;
>>>>    hactive = <1600>;
>>>>
>>>> I don't know much about the differences you mention in point 2,
>>>> but it's a pity to drop support only because we don't want to put
>>>> in the dts the 'hactive', and 'clock-frequency' properties.
>>> Anyway, tm2e board is already in mainline so Panel driver may need to identify what kinds of panel is probed to decide porch values. I think there are relevant registers in MCU of the Panel device to check version or similar thing.
>> I think we can safely use different compatible string for tm2e - it uses
>> different display IC controller - s6e3hf2, driver will provide timings
>> based on it.
> Using compatable string wouldn't be a good idea because Panel is a device not specific to board.

But both panels are different devices:
TM2 has: AMS567DJ01 panel on S6E3HA2 interface (called LDI/IC)
TM2E has AMB559DE01 panel on S6E3HF2 interface (called LDI/IC)

Why assigning different compatibles to different devices is not a good idea?

>
>> As far as I examined available specs/docs there is no reliable register
>> which can be used to safely distinguish it on runtime, but the docs I
>> have are far from completeness.
> The data sheet I am seeing says a RDDIDS register describes manufacturer and module version information. With this we could identify the Panel device.
> Of course, we may need to check the register has really different values according to board.
>
> Below is the version information Hoegeun checked,
>
> TM2
> [    4.908666] panel_s6e3ha2 13900000.dsi.0: Manufacture date: 2014-10-31 06:41
> [    5.035768] panel_s6e3ha2 13900000.dsi.0: Id: 50 20 09
>
> TM2e
> [    4.929265] panel_s6e3ha2 13900000.dsi.0: Manufacture date: 2014-09-03 06:30
> [    5.056287] panel_s6e3ha2 13900000.dsi.0: Id: 40 40 14

There is description of ID1, ID2, ID3 registers in specs of both panels,
I see no reliable bits to distinguish panels.
And relying on read values of random devices does not seems to me proper
solution.

Regards
Andrzej


>
>
> Thanks.
>
>> Regards
>> Andrzej
>>
>>> Thanks.
>>>
>>>> Andi
>>>>
>>>> [1] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts?h=tizen#n1284
>>>> [2] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts?h=tizen#n1270
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe devicetree" in
>>>> the body of a message to majordomo@vger.kernel.org
>>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>>
>>>> .
>>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe devicetree" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>>
>
Inki Dae Jan. 10, 2017, 1:15 a.m. UTC | #9
2017년 01월 09일 18:53에 Andrzej Hajda 이(가) 쓴 글:
> On 09.01.2017 10:19, Inki Dae wrote:
>>
>> 2017년 01월 09일 16:37에 Andrzej Hajda 이(가) 쓴 글:
>>> On 06.01.2017 09:36, Inki Dae wrote:
>>>> 2017년 01월 06일 17:18에 Andi Shyti 이(가) 쓴 글:
>>>>> Hi Inki,
>>>>>
>>>>> Thanks for the reply, but...
>>>>>
>>>>>>>> +static const struct drm_display_mode default_mode = {
>>>>>>>> +	.clock = 222372,
>>>>>>>> +	.hdisplay = 1440,
>>>>>>>> +	.hsync_start = 1440 + 1,
>>>>>>>> +	.hsync_end = 1440 + 1 + 1,
>>>>>>>> +	.htotal = 1440 + 1 + 1 + 1,
>>>>>>>> +	.vdisplay = 2560,
>>>>>>>> +	.vsync_start = 2560 + 1,
>>>>>>>> +	.vsync_end = 2560 + 1 + 1,
>>>>>>>> +	.vtotal = 2560 + 1 + 1 + 15,
>>>>>>>> +	.vrefresh = 60,
>>>>>>>> +	.flags = 0,
>>>>>>>> +};
>>>>>>> how is this working with tm2e? Are these values valid for both
>>>>>>> the boards?
>>>>>> We don't need to consider tm2e board with two reasones,
>>>>>> 1. there is no tm2e board support in mainline
>>>>>> 2. the panel on tm2 would be a little bit different from one on tm2e
>>>>> ... this display in the Tizen Kernel is supported by both:
>>>>> tm2 [1] and tm2e [2]. The only differences are:
>>>> Why tm2e dts file is in mainline? Seems communication miss with Chanwoo. :( 
>>>>
>>>>> TM2:
>>>>>    clock-frequency = <14874444>;
>>>>>    hactive = <1440>;
>>>>>
>>>>> TM2E:
>>>>>    clock-frequency = <16523724>;
>>>>>    hactive = <1600>;
>>>>>
>>>>> I don't know much about the differences you mention in point 2,
>>>>> but it's a pity to drop support only because we don't want to put
>>>>> in the dts the 'hactive', and 'clock-frequency' properties.
>>>> Anyway, tm2e board is already in mainline so Panel driver may need to identify what kinds of panel is probed to decide porch values. I think there are relevant registers in MCU of the Panel device to check version or similar thing.
>>> I think we can safely use different compatible string for tm2e - it uses
>>> different display IC controller - s6e3hf2, driver will provide timings
>>> based on it.
>> Using compatable string wouldn't be a good idea because Panel is a device not specific to board.
> 
> But both panels are different devices:
> TM2 has: AMS567DJ01 panel on S6E3HA2 interface (called LDI/IC)
> TM2E has AMB559DE01 panel on S6E3HF2 interface (called LDI/IC)
> 
> Why assigning different compatibles to different devices is not a good idea?

Oops, I didn't know that these two panels are different so I thought using different compatiable string for same panel device is not good idea.

This panel driver is no problem as-is. For tm2e board, it can be considered with a separated patch later.

For this, these two boards have different MCU modules but just a little bit different so we could do either just adding compatible string to tm2e dts file and panel driver - maybe not reasonable due to different hardware name - or creating new panel driver even though source code is duplicated.

Thanks.

> 
>>
>>> As far as I examined available specs/docs there is no reliable register
>>> which can be used to safely distinguish it on runtime, but the docs I
>>> have are far from completeness.
>> The data sheet I am seeing says a RDDIDS register describes manufacturer and module version information. With this we could identify the Panel device.
>> Of course, we may need to check the register has really different values according to board.
>>
>> Below is the version information Hoegeun checked,
>>
>> TM2
>> [    4.908666] panel_s6e3ha2 13900000.dsi.0: Manufacture date: 2014-10-31 06:41
>> [    5.035768] panel_s6e3ha2 13900000.dsi.0: Id: 50 20 09
>>
>> TM2e
>> [    4.929265] panel_s6e3ha2 13900000.dsi.0: Manufacture date: 2014-09-03 06:30
>> [    5.056287] panel_s6e3ha2 13900000.dsi.0: Id: 40 40 14
> 
> There is description of ID1, ID2, ID3 registers in specs of both panels,
> I see no reliable bits to distinguish panels.
> And relying on read values of random devices does not seems to me proper
> solution.
> 
> Regards
> Andrzej
> 
> 
>>
>>
>> Thanks.
>>
>>> Regards
>>> Andrzej
>>>
>>>> Thanks.
>>>>
>>>>> Andi
>>>>>
>>>>> [1] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts?h=tizen#n1284
>>>>> [2] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts?h=tizen#n1270
>>>>> --
>>>>> To unsubscribe from this list: send the line "unsubscribe devicetree" in
>>>>> the body of a message to majordomo@vger.kernel.org
>>>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>>>
>>>>> .
>>>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe devicetree" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>
>>>
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
new file mode 100644
index 0000000..da4c291
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
@@ -0,0 +1,28 @@ 
+Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+
+Required properties:
+  - compatible: "samsung,s6e3ha2"
+  - reg: the virtual channel number of a DSI peripheral
+  - vdd3-supply: I/O voltage supply
+  - vci-supply: voltage supply for analog circuits
+  - reset-gpios: a GPIO spec for the reset pin (active low)
+  - enable-gpios: a GPIO spec for the panel enable pin (active high)
+  - te-gpios: a GPIO spec for the tearing effect synchronization signal
+    gpio pin (active high)
+
+Example:
+
+&dsi {
+	...
+
+	panel@0 {
+		compatible = "samsung,s6e3ha2";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 62aba97..d913c83 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -52,6 +52,12 @@  config DRM_PANEL_PANASONIC_VVX10F034N00
 	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
 	  Xperia Z2 tablets
 
+config DRM_PANEL_SAMSUNG_S6E3HA2
+	tristate "Samsung S6E3HA2 DSI video mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	select VIDEOMODE_HELPERS
+
 config DRM_PANEL_SAMSUNG_S6E8AA0
 	tristate "Samsung S6E8AA0 DSI video mode panel"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index a5c7ec0..1d483b0 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -3,6 +3,7 @@  obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
 obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
 obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
+obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
new file mode 100644
index 0000000..0b9c6f4
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
@@ -0,0 +1,754 @@ 
+/*
+ * MIPI-DSI based s6e3ha2 AMOLED 5.7 inch panel driver.
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Donghwa Lee <dh09.lee@samsung.com>
+ * Hyungwon Hwang <human.hwang@samsung.com>
+ * Hoegeun Kwon <hoegeun.kwon@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+#define S6E3HA2_MIN_BRIGHTNESS		0
+#define S6E3HA2_MAX_BRIGHTNESS		100
+#define S6E3HA2_DEFAULT_BRIGHTNESS	80
+
+#define S6E3HA2_NUM_GAMMA_STEPS		46
+#define S6E3HA2_GAMMA_CMD_CNT		35
+#define S6E3HA2_VINT_STATUS_MAX		10
+
+static const u8 gamma_tbl[S6E3HA2_NUM_GAMMA_STEPS][S6E3HA2_GAMMA_CMD_CNT] = {
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x82, 0x83,
+	  0x85, 0x88, 0x8b, 0x8b, 0x84, 0x88, 0x82, 0x82, 0x89, 0x86, 0x8c,
+	  0x94, 0x84, 0xb1, 0xaf, 0x8e, 0xcf, 0xad, 0xc9, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x84, 0x84,
+	  0x85, 0x87, 0x8b, 0x8a, 0x84, 0x88, 0x82, 0x82, 0x89, 0x86, 0x8a,
+	  0x93, 0x84, 0xb0, 0xae, 0x8e, 0xc9, 0xa8, 0xc5, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x8a, 0x8a, 0x84, 0x88, 0x81, 0x84, 0x8a, 0x88, 0x8a,
+	  0x91, 0x84, 0xb1, 0xae, 0x8b, 0xd5, 0xb2, 0xcc, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x8a, 0x8a, 0x84, 0x87, 0x81, 0x84, 0x8a, 0x87, 0x8a,
+	  0x91, 0x85, 0xae, 0xac, 0x8a, 0xc3, 0xa3, 0xc0, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x85, 0x85,
+	  0x86, 0x85, 0x88, 0x89, 0x84, 0x89, 0x82, 0x84, 0x87, 0x85, 0x8b,
+	  0x91, 0x88, 0xad, 0xab, 0x8a, 0xb7, 0x9b, 0xb6, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x89, 0x8a, 0x84, 0x89, 0x83, 0x83, 0x86, 0x84, 0x8b,
+	  0x90, 0x84, 0xb0, 0xae, 0x8b, 0xce, 0xad, 0xc8, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+	  0x85, 0x87, 0x89, 0x8a, 0x83, 0x87, 0x82, 0x85, 0x88, 0x87, 0x89,
+	  0x8f, 0x84, 0xac, 0xaa, 0x89, 0xb1, 0x98, 0xaf, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x88, 0x89, 0x84, 0x88, 0x83, 0x82, 0x85, 0x84, 0x8c,
+	  0x91, 0x86, 0xac, 0xaa, 0x89, 0xc2, 0xa5, 0xbd, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x85, 0x87, 0x89, 0x8a, 0x83, 0x87, 0x82, 0x85, 0x88, 0x87, 0x88,
+	  0x8b, 0x82, 0xad, 0xaa, 0x8a, 0xc2, 0xa5, 0xbd, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x87, 0x89, 0x84, 0x88, 0x83, 0x82, 0x85, 0x84, 0x8a,
+	  0x8e, 0x84, 0xae, 0xac, 0x89, 0xda, 0xb7, 0xd0, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x85, 0x86, 0x87, 0x89, 0x84, 0x88, 0x83, 0x80, 0x83, 0x82, 0x8b,
+	  0x8e, 0x85, 0xac, 0xaa, 0x89, 0xc8, 0xaa, 0xc1, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x85, 0x86, 0x87, 0x89, 0x81, 0x85, 0x81, 0x84, 0x86, 0x84, 0x8c,
+	  0x8c, 0x84, 0xa9, 0xa8, 0x87, 0xa3, 0x92, 0xa1, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x85, 0x86, 0x87, 0x89, 0x84, 0x86, 0x83, 0x80, 0x83, 0x81, 0x8c,
+	  0x8d, 0x84, 0xaa, 0xaa, 0x89, 0xce, 0xaf, 0xc5, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x85, 0x86, 0x87, 0x89, 0x81, 0x83, 0x80, 0x83, 0x85, 0x85, 0x8c,
+	  0x8c, 0x84, 0xa8, 0xa8, 0x88, 0xb5, 0x9f, 0xb0, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x86, 0x86, 0x87, 0x88, 0x81, 0x83, 0x80, 0x83, 0x85, 0x85, 0x8c,
+	  0x8b, 0x84, 0xab, 0xa8, 0x86, 0xd4, 0xb4, 0xc9, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x86, 0x86, 0x87, 0x88, 0x81, 0x83, 0x80, 0x84, 0x84, 0x85, 0x8b,
+	  0x8a, 0x83, 0xa6, 0xa5, 0x84, 0xbb, 0xa4, 0xb3, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x86, 0x85, 0x86, 0x86, 0x82, 0x85, 0x81, 0x82, 0x83, 0x84, 0x8e,
+	  0x8b, 0x83, 0xa4, 0xa3, 0x8a, 0xa1, 0x93, 0x9d, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x87, 0x87, 0x82, 0x85, 0x81, 0x82, 0x82, 0x84, 0x8e,
+	  0x8b, 0x83, 0xa4, 0xa2, 0x86, 0xc1, 0xa9, 0xb7, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x87, 0x87, 0x82, 0x85, 0x81, 0x82, 0x82, 0x84, 0x8d,
+	  0x89, 0x82, 0xa2, 0xa1, 0x84, 0xa7, 0x98, 0xa1, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x87, 0x87, 0x82, 0x85, 0x81, 0x83, 0x83, 0x85, 0x8c,
+	  0x87, 0x7f, 0xa2, 0x9d, 0x88, 0x8d, 0x88, 0x8b, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xbb, 0x00, 0xc5, 0x00, 0xb4, 0x87, 0x86, 0x86, 0x84, 0x83,
+	  0x86, 0x87, 0x87, 0x87, 0x80, 0x82, 0x7f, 0x86, 0x86, 0x88, 0x8a,
+	  0x84, 0x7e, 0x9d, 0x9c, 0x82, 0x8d, 0x88, 0x8b, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xbd, 0x00, 0xc7, 0x00, 0xb7, 0x87, 0x85, 0x85, 0x84, 0x83,
+	  0x86, 0x86, 0x86, 0x88, 0x81, 0x83, 0x80, 0x83, 0x84, 0x85, 0x8a,
+	  0x85, 0x7e, 0x9c, 0x9b, 0x85, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xc0, 0x00, 0xca, 0x00, 0xbb, 0x87, 0x86, 0x85, 0x83, 0x83,
+	  0x85, 0x86, 0x86, 0x88, 0x81, 0x83, 0x80, 0x84, 0x85, 0x86, 0x89,
+	  0x83, 0x7d, 0x9c, 0x99, 0x87, 0x7b, 0x7b, 0x7c, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xc4, 0x00, 0xcd, 0x00, 0xbe, 0x87, 0x86, 0x85, 0x83, 0x83,
+	  0x86, 0x85, 0x85, 0x87, 0x81, 0x82, 0x80, 0x82, 0x82, 0x83, 0x8a,
+	  0x85, 0x7f, 0x9f, 0x9b, 0x86, 0xb4, 0xa1, 0xac, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xc7, 0x00, 0xd0, 0x00, 0xc2, 0x87, 0x85, 0x85, 0x83, 0x82,
+	  0x85, 0x85, 0x85, 0x86, 0x82, 0x83, 0x80, 0x82, 0x82, 0x84, 0x87,
+	  0x86, 0x80, 0x9e, 0x9a, 0x87, 0xa7, 0x98, 0xa1, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xca, 0x00, 0xd2, 0x00, 0xc5, 0x87, 0x85, 0x84, 0x82, 0x82,
+	  0x84, 0x85, 0x85, 0x86, 0x81, 0x82, 0x7f, 0x82, 0x82, 0x84, 0x88,
+	  0x86, 0x81, 0x9d, 0x98, 0x86, 0x8d, 0x88, 0x8b, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xce, 0x00, 0xd6, 0x00, 0xca, 0x86, 0x85, 0x84, 0x83, 0x83,
+	  0x85, 0x84, 0x84, 0x85, 0x81, 0x82, 0x80, 0x81, 0x81, 0x82, 0x89,
+	  0x86, 0x81, 0x9c, 0x97, 0x86, 0xa7, 0x98, 0xa1, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xd1, 0x00, 0xd9, 0x00, 0xce, 0x86, 0x84, 0x83, 0x83, 0x82,
+	  0x85, 0x85, 0x85, 0x86, 0x81, 0x83, 0x81, 0x82, 0x82, 0x83, 0x86,
+	  0x83, 0x7f, 0x99, 0x95, 0x86, 0xbb, 0xa4, 0xb3, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xd4, 0x00, 0xdb, 0x00, 0xd1, 0x86, 0x85, 0x83, 0x83, 0x82,
+	  0x85, 0x84, 0x84, 0x85, 0x80, 0x83, 0x82, 0x80, 0x80, 0x81, 0x87,
+	  0x84, 0x81, 0x98, 0x93, 0x85, 0xae, 0x9c, 0xa8, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xd8, 0x00, 0xde, 0x00, 0xd6, 0x86, 0x84, 0x83, 0x81, 0x81,
+	  0x83, 0x85, 0x85, 0x85, 0x82, 0x83, 0x81, 0x81, 0x81, 0x83, 0x86,
+	  0x84, 0x80, 0x98, 0x91, 0x85, 0x7b, 0x7b, 0x7c, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xdc, 0x00, 0xe2, 0x00, 0xda, 0x85, 0x84, 0x83, 0x82, 0x82,
+	  0x84, 0x84, 0x84, 0x85, 0x81, 0x82, 0x82, 0x80, 0x80, 0x81, 0x83,
+	  0x82, 0x7f, 0x99, 0x93, 0x86, 0x94, 0x8b, 0x92, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xdf, 0x00, 0xe5, 0x00, 0xde, 0x85, 0x84, 0x82, 0x82, 0x82,
+	  0x84, 0x83, 0x83, 0x84, 0x81, 0x81, 0x80, 0x83, 0x82, 0x84, 0x82,
+	  0x81, 0x7f, 0x99, 0x92, 0x86, 0x7b, 0x7b, 0x7c, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x81, 0x81,
+	  0x82, 0x83, 0x83, 0x84, 0x80, 0x81, 0x80, 0x83, 0x83, 0x84, 0x80,
+	  0x81, 0x7c, 0x99, 0x92, 0x87, 0xa1, 0x93, 0x9d, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x85, 0x84, 0x83, 0x81, 0x81,
+	  0x82, 0x82, 0x82, 0x83, 0x80, 0x81, 0x80, 0x81, 0x80, 0x82, 0x83,
+	  0x82, 0x80, 0x91, 0x8d, 0x83, 0x9a, 0x90, 0x96, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x81, 0x81,
+	  0x82, 0x83, 0x83, 0x84, 0x80, 0x81, 0x80, 0x81, 0x80, 0x82, 0x83,
+	  0x81, 0x7f, 0x91, 0x8c, 0x82, 0x8d, 0x88, 0x8b, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x81, 0x81,
+	  0x82, 0x83, 0x83, 0x83, 0x82, 0x82, 0x81, 0x81, 0x80, 0x82, 0x82,
+	  0x82, 0x7f, 0x94, 0x89, 0x84, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x81, 0x81,
+	  0x82, 0x83, 0x83, 0x83, 0x82, 0x82, 0x81, 0x81, 0x80, 0x82, 0x83,
+	  0x82, 0x7f, 0x91, 0x85, 0x81, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x81, 0x81,
+	  0x82, 0x83, 0x83, 0x83, 0x80, 0x80, 0x7f, 0x83, 0x82, 0x84, 0x83,
+	  0x82, 0x7f, 0x90, 0x84, 0x81, 0x9a, 0x90, 0x96, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x80, 0x80,
+	  0x82, 0x83, 0x83, 0x83, 0x80, 0x80, 0x7f, 0x80, 0x80, 0x81, 0x81,
+	  0x82, 0x83, 0x7e, 0x80, 0x7c, 0xa4, 0x97, 0x9f, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe9, 0x00, 0xec, 0x00, 0xe8, 0x84, 0x83, 0x82, 0x81, 0x81,
+	  0x82, 0x82, 0x82, 0x83, 0x7f, 0x7f, 0x7f, 0x81, 0x80, 0x82, 0x83,
+	  0x83, 0x84, 0x79, 0x7c, 0x79, 0xb1, 0xa0, 0xaa, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xed, 0x00, 0xf0, 0x00, 0xec, 0x83, 0x83, 0x82, 0x80, 0x80,
+	  0x81, 0x82, 0x82, 0x82, 0x7f, 0x7f, 0x7e, 0x81, 0x81, 0x82, 0x80,
+	  0x81, 0x81, 0x84, 0x84, 0x83, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xf1, 0x00, 0xf4, 0x00, 0xf1, 0x83, 0x82, 0x82, 0x80, 0x80,
+	  0x81, 0x82, 0x82, 0x82, 0x80, 0x80, 0x80, 0x80, 0x80, 0x81, 0x7d,
+	  0x7e, 0x7f, 0x84, 0x84, 0x83, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xf6, 0x00, 0xf7, 0x00, 0xf5, 0x82, 0x82, 0x81, 0x80, 0x80,
+	  0x80, 0x82, 0x82, 0x82, 0x80, 0x80, 0x80, 0x7f, 0x7f, 0x7f, 0x82,
+	  0x82, 0x82, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xfa, 0x00, 0xfb, 0x00, 0xfa, 0x81, 0x81, 0x81, 0x80, 0x80,
+	  0x80, 0x82, 0x82, 0x82, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+	  0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80,
+	  0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+	  0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80,
+	  0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+	  0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 }
+};
+
+unsigned char vint_table[S6E3HA2_VINT_STATUS_MAX] = {
+	0x18, 0x19, 0x1a, 0x1b, 0x1c,
+	0x1d, 0x1e, 0x1f, 0x20, 0x21
+};
+
+struct s6e3ha2 {
+	struct device *dev;
+	struct drm_panel panel;
+	struct backlight_device *bl_dev;
+
+	struct regulator_bulk_data supplies[2];
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *enable_gpio;
+
+	/* This field is tested by functions directly accessing DSI bus before
+	 * transfer, transfer is skipped if it is set. In case of transfer
+	 * failure or unexpected response the field is set to error value.
+	 * Such construct allows to eliminate many checks in higher level
+	 * functions.
+	 */
+	int error;
+};
+
+static int  s6e3ha2_clear_error(struct s6e3ha2 *ctx)
+{
+	int ret = ctx->error;
+
+	ctx->error = 0;
+	return ret;
+}
+
+static void s6e3ha2_dcs_write(struct s6e3ha2 *ctx, const void *data, size_t len)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	ssize_t ret;
+
+	if (ctx->error < 0)
+		return;
+
+	ret = mipi_dsi_dcs_write_buffer(dsi, data, len);
+	if (ret < 0) {
+		dev_err(ctx->dev, "error %zd writing dcs seq: %*ph\n",
+						ret, (int)len, data);
+		ctx->error = ret;
+	}
+}
+
+#define s6e3ha2_dcs_write_seq_static(ctx, seq...) do {	\
+	static const u8 d[] = { seq };			\
+	s6e3ha2_dcs_write(ctx, d, ARRAY_SIZE(d));	\
+} while (0)
+
+static void s6e3ha2_test_key_on_f0(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xf0, 0x5a, 0x5a);
+}
+
+static void s6e3ha2_test_key_off_f0(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xf0, 0xa5, 0xa5);
+}
+
+static void s6e3ha2_test_key_on_fc(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xfc, 0x5a, 0x5a);
+}
+
+static void s6e3ha2_test_key_off_fc(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xfc, 0xa5, 0xa5);
+}
+
+static void s6e3ha2_single_dsi_set(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xf2, 0x67);
+	s6e3ha2_dcs_write_seq_static(ctx, 0xf9, 0x09);
+}
+
+static void s6e3ha2_freq_calibration(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xfd, 0x1c);
+	s6e3ha2_dcs_write_seq_static(ctx, 0xfe, 0x20, 0x39);
+	s6e3ha2_dcs_write_seq_static(ctx, 0xfe, 0xa0);
+	s6e3ha2_dcs_write_seq_static(ctx, 0xfe, 0x20);
+	s6e3ha2_dcs_write_seq_static(ctx, 0xce, 0x03, 0x3b, 0x12, 0x62,
+		0x40, 0x80, 0xc0, 0x28, 0x28, 0x28, 0x28, 0x39, 0xc5);
+}
+
+static void s6e3ha2_aor_control(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xb2, 0x03, 0x10);
+}
+
+static void s6e3ha2_caps_elvss_set(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xb6, 0x9c, 0x0a);
+}
+
+static void s6e3ha2_acl_off(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0x55, 0x00);
+}
+
+static void s6e3ha2_acl_off_opr(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xb5, 0x40);
+}
+
+static void s6e3ha2_test_global(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xb0, 0x07);
+}
+
+static void s6e3ha2_test(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xb8, 0x19);
+}
+
+static void s6e3ha2_touch_hsync_on1(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx,
+			0xbd, 0x33, 0x11, 0x02, 0x16, 0x02, 0x16);
+}
+
+static void s6e3ha2_pentile_control(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xc0, 0x00, 0x00, 0xd8, 0xd8);
+}
+
+static void s6e3ha2_poc_global(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xb0, 0x20);
+}
+
+static void s6e3ha2_poc_setting(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xfe, 0x08);
+}
+
+static void s6e3ha2_pcd_set_off(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xcc, 0x40, 0x51);
+}
+
+static void s6e3ha2_err_fg_set(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xed, 0x44);
+}
+
+static void s6e3ha2_hbm_off(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0x53, 0x00);
+}
+
+static void s6e3ha2_te_start_setting(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xb9, 0x10, 0x09, 0xff, 0x00, 0x09);
+}
+
+static void s6e3ha2_gamma_update(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xf7, 0x03);
+	ndelay(100); /* need for 100ns delay */
+	s6e3ha2_dcs_write_seq_static(ctx, 0xf7, 0x00);
+}
+
+static int s6e3ha2_get_brightness(struct backlight_device *bl_dev)
+{
+	return bl_dev->props.brightness;
+}
+
+static void s6e3ha2_set_vint(struct s6e3ha2 *ctx)
+{
+	struct backlight_device *bl_dev = ctx->bl_dev;
+	unsigned int brightness = bl_dev->props.brightness;
+	unsigned char data[] = { 0xf4, 0x8b,
+			vint_table[brightness * (S6E3HA2_VINT_STATUS_MAX - 1) /
+			S6E3HA2_MAX_BRIGHTNESS] };
+
+	s6e3ha2_dcs_write(ctx, data, ARRAY_SIZE(data));
+}
+
+static unsigned int s6e3ha2_get_brightness_index(unsigned int brightness)
+{
+	return (brightness * (S6E3HA2_NUM_GAMMA_STEPS - 1)) /
+		S6E3HA2_MAX_BRIGHTNESS;
+}
+
+static int s6e3ha2_update_gamma(struct s6e3ha2 *ctx, unsigned int brightness)
+{
+	struct backlight_device *bl_dev = ctx->bl_dev;
+	unsigned int index = s6e3ha2_get_brightness_index(brightness);
+	u8 data[S6E3HA2_GAMMA_CMD_CNT + 1] = { 0xca, };
+
+	memcpy(data + 1, gamma_tbl + index, S6E3HA2_GAMMA_CMD_CNT);
+	s6e3ha2_dcs_write(ctx, data, ARRAY_SIZE(data));
+
+	s6e3ha2_gamma_update(ctx);
+	bl_dev->props.brightness = brightness;
+
+	return 0;
+}
+
+static int s6e3ha2_set_brightness(struct backlight_device *bl_dev)
+{
+	struct s6e3ha2 *ctx = bl_get_data(bl_dev);
+	unsigned int brightness = bl_dev->props.brightness;
+
+	if (brightness < S6E3HA2_MIN_BRIGHTNESS ||
+		brightness > bl_dev->props.max_brightness) {
+		dev_err(ctx->dev, "Invalid brightness: %u\n", brightness);
+		return -EINVAL;
+	}
+
+	if (bl_dev->props.power > FB_BLANK_NORMAL)
+		return -EPERM;
+
+	s6e3ha2_test_key_on_f0(ctx);
+	s6e3ha2_update_gamma(ctx, brightness);
+	s6e3ha2_aor_control(ctx);
+	s6e3ha2_set_vint(ctx);
+	s6e3ha2_test_key_off_f0(ctx);
+
+	return ctx->error;
+}
+
+static const struct backlight_ops s6e3ha2_bl_ops = {
+	.get_brightness = s6e3ha2_get_brightness,
+	.update_status = s6e3ha2_set_brightness,
+};
+
+static int s6e3ha2_panel_init(struct s6e3ha2 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0)
+		return ret;
+	usleep_range(5000, 6000);
+
+	s6e3ha2_test_key_on_f0(ctx);
+	s6e3ha2_single_dsi_set(ctx);
+	s6e3ha2_test_key_on_fc(ctx);
+	s6e3ha2_freq_calibration(ctx);
+	s6e3ha2_test_key_off_fc(ctx);
+	s6e3ha2_test_key_off_f0(ctx);
+
+	return 0;
+}
+
+static int s6e3ha2_power_off(struct s6e3ha2 *ctx)
+{
+	return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static int s6e3ha2_disable(struct drm_panel *panel)
+{
+	struct s6e3ha2 *ctx = container_of(panel, struct s6e3ha2, panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0)
+		return ret;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0)
+		return ret;
+
+	msleep(40);
+	ctx->bl_dev->props.power = FB_BLANK_NORMAL;
+
+	return 0;
+}
+
+static int s6e3ha2_unprepare(struct drm_panel *panel)
+{
+	struct s6e3ha2 *ctx = container_of(panel, struct s6e3ha2, panel);
+	int ret;
+
+	ret = s6e3ha2_clear_error(ctx);
+	if (!ret)
+		ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
+
+	return s6e3ha2_power_off(ctx);
+}
+
+static int s6e3ha2_power_on(struct s6e3ha2 *ctx)
+{
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret < 0)
+		return ret;
+
+	msleep(120);
+
+	gpiod_set_value(ctx->enable_gpio, 0);
+	usleep_range(5000, 6000);
+	gpiod_set_value(ctx->enable_gpio, 1);
+
+	gpiod_set_value(ctx->reset_gpio, 1);
+	usleep_range(5000, 6000);
+	gpiod_set_value(ctx->reset_gpio, 0);
+	usleep_range(5000, 6000);
+
+	return 0;
+}
+static int s6e3ha2_prepare(struct drm_panel *panel)
+{
+	struct s6e3ha2 *ctx = container_of(panel, struct s6e3ha2, panel);
+	int ret;
+
+	ret = s6e3ha2_power_on(ctx);
+	if (ret < 0)
+		return ret;
+
+	ret = s6e3ha2_panel_init(ctx);
+	if (ret < 0)
+		goto err;
+
+	ret = s6e3ha2_clear_error(ctx);
+	if (ret < 0)
+		goto err;
+
+	ctx->bl_dev->props.power = FB_BLANK_NORMAL;
+
+	return 0;
+
+err:
+	s6e3ha2_power_off(ctx);
+	return ret;
+}
+
+static int s6e3ha2_enable(struct drm_panel *panel)
+{
+	struct s6e3ha2 *ctx = container_of(panel, struct s6e3ha2, panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	/* common setting */
+	ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+	if (ret < 0)
+		return ret;
+
+	s6e3ha2_test_key_on_f0(ctx);
+	s6e3ha2_test_key_on_fc(ctx);
+	s6e3ha2_touch_hsync_on1(ctx);
+	s6e3ha2_pentile_control(ctx);
+	s6e3ha2_poc_global(ctx);
+	s6e3ha2_poc_setting(ctx);
+	s6e3ha2_test_key_off_fc(ctx);
+
+	/* pcd setting off for TB */
+	s6e3ha2_pcd_set_off(ctx);
+	s6e3ha2_err_fg_set(ctx);
+	s6e3ha2_te_start_setting(ctx);
+
+	/* brightness setting */
+	s6e3ha2_set_brightness(ctx->bl_dev);
+	s6e3ha2_aor_control(ctx);
+	s6e3ha2_caps_elvss_set(ctx);
+	s6e3ha2_gamma_update(ctx);
+	s6e3ha2_acl_off(ctx);
+	s6e3ha2_acl_off_opr(ctx);
+	s6e3ha2_hbm_off(ctx);
+
+	/* elvss temp compensation */
+	s6e3ha2_test_global(ctx);
+	s6e3ha2_test(ctx);
+	s6e3ha2_test_key_off_f0(ctx);
+
+	if (ctx->error != 0)
+		return ctx->error;
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0)
+		return ret;
+
+	ctx->bl_dev->props.power = FB_BLANK_UNBLANK;
+
+	return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+	.clock = 222372,
+	.hdisplay = 1440,
+	.hsync_start = 1440 + 1,
+	.hsync_end = 1440 + 1 + 1,
+	.htotal = 1440 + 1 + 1 + 1,
+	.vdisplay = 2560,
+	.vsync_start = 2560 + 1,
+	.vsync_end = 2560 + 1 + 1,
+	.vtotal = 2560 + 1 + 1 + 15,
+	.vrefresh = 60,
+	.flags = 0,
+};
+
+static int s6e3ha2_get_modes(struct drm_panel *panel)
+{
+	struct drm_connector *connector = panel->connector;
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(panel->drm, &default_mode);
+	if (!mode) {
+		DRM_ERROR("failed to add mode %ux%ux@%u\n",
+				default_mode.hdisplay, default_mode.vdisplay,
+				default_mode.vrefresh);
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	drm_mode_probed_add(connector, mode);
+
+	connector->display_info.width_mm = 71;
+	connector->display_info.height_mm = 125;
+
+	return 1;
+}
+
+static const struct drm_panel_funcs s6e3ha2_drm_funcs = {
+	.disable = s6e3ha2_disable,
+	.unprepare = s6e3ha2_unprepare,
+	.prepare = s6e3ha2_prepare,
+	.enable = s6e3ha2_enable,
+	.get_modes = s6e3ha2_get_modes,
+};
+
+static int s6e3ha2_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct s6e3ha2 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	ctx->dev = dev;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+	ctx->supplies[0].supply = "vdd3";
+	ctx->supplies[1].supply = "vci";
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+				      ctx->supplies);
+	if (ret < 0) {
+		dev_err(dev, "failed to get regulators: %d\n", ret);
+		return ret;
+	}
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset_gpio)) {
+		dev_err(dev, "cannot get reset-gpios %ld\n",
+			PTR_ERR(ctx->reset_gpio));
+		return PTR_ERR(ctx->reset_gpio);
+	}
+
+	ctx->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->enable_gpio)) {
+		dev_err(dev, "cannot get enable-gpios %ld\n",
+			PTR_ERR(ctx->enable_gpio));
+		return PTR_ERR(ctx->enable_gpio);
+	}
+
+	ctx->bl_dev = backlight_device_register("s6e3ha2", dev, ctx,
+						&s6e3ha2_bl_ops, NULL);
+	if (IS_ERR(ctx->bl_dev)) {
+		dev_err(dev, "failed to register backlight device\n");
+		return PTR_ERR(ctx->bl_dev);
+	}
+
+	ctx->bl_dev->props.max_brightness = S6E3HA2_MAX_BRIGHTNESS;
+	ctx->bl_dev->props.brightness = S6E3HA2_DEFAULT_BRIGHTNESS;
+	ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
+
+	drm_panel_init(&ctx->panel);
+	ctx->panel.dev = dev;
+	ctx->panel.funcs = &s6e3ha2_drm_funcs;
+
+	ret = drm_panel_add(&ctx->panel);
+	if (ret < 0)
+		goto unregister_backlight;
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0)
+		goto remove_panel;
+
+	return ret;
+
+remove_panel:
+	drm_panel_remove(&ctx->panel);
+
+unregister_backlight:
+	backlight_device_unregister(ctx->bl_dev);
+
+	return ret;
+}
+
+static int s6e3ha2_remove(struct mipi_dsi_device *dsi)
+{
+	struct s6e3ha2 *ctx = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&ctx->panel);
+	backlight_device_unregister(ctx->bl_dev);
+
+	return 0;
+}
+
+static const struct of_device_id s6e3ha2_of_match[] = {
+	{ .compatible = "samsung,s6e3ha2" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, s6e3ha2_of_match);
+
+static struct mipi_dsi_driver s6e3ha2_driver = {
+	.probe = s6e3ha2_probe,
+	.remove = s6e3ha2_remove,
+	.driver = {
+		.name = "panel-samsung-s6e3ha2",
+		.of_match_table = s6e3ha2_of_match,
+	},
+};
+module_mipi_dsi_driver(s6e3ha2_driver);
+
+MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>");
+MODULE_AUTHOR("Hyungwon Hwang <human.hwang@samsung.com>");
+MODULE_AUTHOR("Hoegeun Kwon <hoegeun.kwon@samsung.com>");
+MODULE_DESCRIPTION("MIPI-DSI based s6e3ha2 AMOLED Panel Driver");
+MODULE_LICENSE("GPL v2");