diff mbox

[v2,06/10] ASoC: sun8i-codec-analog: Add amplifier event to fix first delay

Message ID 20170117140230.23142-7-mylene.josserand@free-electrons.com (mailing list archive)
State Accepted
Commit bf14da7e55169964a1e6f35dc9d7428dc9e9013c
Headers show

Commit Message

Mylene JOSSERAND Jan. 17, 2017, 2:02 p.m. UTC
When playing a sound for the first time, a short delay, where the audio
file is not played, can be noticed.
On a second play (right after), the sound is played correctly.
If we wait a short time (~5 sec which corresponds to the aplay
timeout), the delay is back.

This patch fixes it by using an event on headphone amplifier.
It allows to keep the amplifier enable while playing a sound.
A delay of 700ms allows to wait that the amplifier is powered-up
before playing the sound.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
---
 sound/soc/sunxi/sun8i-codec-analog.c | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

Comments

Maxime Ripard Jan. 17, 2017, 4:49 p.m. UTC | #1
On Tue, Jan 17, 2017 at 03:02:26PM +0100, Mylène Josserand wrote:
> When playing a sound for the first time, a short delay, where the audio
> file is not played, can be noticed.
> On a second play (right after), the sound is played correctly.
> If we wait a short time (~5 sec which corresponds to the aplay
> timeout), the delay is back.
> 
> This patch fixes it by using an event on headphone amplifier.
> It allows to keep the amplifier enable while playing a sound.
> A delay of 700ms allows to wait that the amplifier is powered-up
> before playing the sound.
> 
> Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Thanks,
Maxime
diff mbox

Patch

diff --git a/sound/soc/sunxi/sun8i-codec-analog.c b/sound/soc/sunxi/sun8i-codec-analog.c
index af02290ebe49..72331332b72e 100644
--- a/sound/soc/sunxi/sun8i-codec-analog.c
+++ b/sound/soc/sunxi/sun8i-codec-analog.c
@@ -398,11 +398,37 @@  static const struct snd_kcontrol_new sun8i_codec_hp_src[] = {
 		      sun8i_codec_hp_src_enum),
 };
 
+static int sun8i_headphone_amp_event(struct snd_soc_dapm_widget *w,
+				     struct snd_kcontrol *k, int event)
+{
+	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+
+	if (SND_SOC_DAPM_EVENT_ON(event)) {
+		snd_soc_component_update_bits(component, SUN8I_ADDA_PAEN_HP_CTRL,
+					      BIT(SUN8I_ADDA_PAEN_HP_CTRL_HPPAEN),
+					      BIT(SUN8I_ADDA_PAEN_HP_CTRL_HPPAEN));
+		/*
+		 * Need a delay to have the amplifier up. 700ms seems the best
+		 * compromise between the time to let the amplifier up and the
+		 * time not to feel this delay while playing a sound.
+		 */
+		msleep(700);
+	} else if (SND_SOC_DAPM_EVENT_OFF(event)) {
+		snd_soc_component_update_bits(component, SUN8I_ADDA_PAEN_HP_CTRL,
+					      BIT(SUN8I_ADDA_PAEN_HP_CTRL_HPPAEN),
+					      0x0);
+	}
+
+	return 0;
+}
+
 static const struct snd_soc_dapm_widget sun8i_codec_headphone_widgets[] = {
 	SND_SOC_DAPM_MUX("Headphone Source Playback Route",
 			 SND_SOC_NOPM, 0, 0, sun8i_codec_hp_src),
-	SND_SOC_DAPM_OUT_DRV("Headphone Amp", SUN8I_ADDA_PAEN_HP_CTRL,
-			     SUN8I_ADDA_PAEN_HP_CTRL_HPPAEN, 0, NULL, 0),
+	SND_SOC_DAPM_OUT_DRV_E("Headphone Amp", SUN8I_ADDA_PAEN_HP_CTRL,
+			       SUN8I_ADDA_PAEN_HP_CTRL_HPPAEN, 0, NULL, 0,
+			       sun8i_headphone_amp_event,
+			       SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
 	SND_SOC_DAPM_SUPPLY("HPCOM Protection", SUN8I_ADDA_PAEN_HP_CTRL,
 			    SUN8I_ADDA_PAEN_HP_CTRL_COMPTEN, 0, NULL, 0),
 	SND_SOC_DAPM_REG(snd_soc_dapm_supply, "HPCOM", SUN8I_ADDA_PAEN_HP_CTRL,