[01/15] drm/kms-helpers: Use recommened kerneldoc for struct member refs
diff mbox

Message ID 20170125062657.19270-2-daniel.vetter@ffwll.ch
State New
Headers show

Commit Message

Daniel Vetter Jan. 25, 2017, 6:26 a.m. UTC
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).

Also some minor drive-by polish where it makes sense, I read a lot
of docs ...

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
---
 drivers/gpu/drm/drm_atomic_helper.c      |  97 ++++++++++----------
 drivers/gpu/drm/drm_crtc_helper.c        |  28 +++---
 drivers/gpu/drm/drm_dp_helper.c          |   2 +-
 drivers/gpu/drm/drm_fb_helper.c          |  48 +++++-----
 drivers/gpu/drm/drm_plane_helper.c       |   9 +-
 drivers/gpu/drm/drm_probe_helper.c       |  14 +--
 include/drm/drm_atomic_helper.h          |  13 +--
 include/drm/drm_dp_mst_helper.h          |   7 +-
 include/drm/drm_flip_work.h              |   2 +-
 include/drm/drm_modeset_helper_vtables.h | 146 ++++++++++++++++---------------
 include/drm/drm_simple_kms_helper.h      |  12 +--
 11 files changed, 197 insertions(+), 181 deletions(-)

Comments

Gustavo Padovan Jan. 25, 2017, 12:48 p.m. UTC | #1
Hi Daniel,

2017-01-25 Daniel Vetter <daniel.vetter@ffwll.ch>:

> I just learned that &struct_name.member_name works and looks pretty
> even. It doesn't (yet) link to the member directly though, which would
> be really good for big structures or vfunc tables (where the
> per-member kerneldoc tends to be long).
> 
> Also some minor drive-by polish where it makes sense, I read a lot
> of docs ...
> 
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Chris Wilson <chris@chris-wilson.co.uk>
> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> ---
>  drivers/gpu/drm/drm_atomic_helper.c      |  97 ++++++++++----------
>  drivers/gpu/drm/drm_crtc_helper.c        |  28 +++---
>  drivers/gpu/drm/drm_dp_helper.c          |   2 +-
>  drivers/gpu/drm/drm_fb_helper.c          |  48 +++++-----
>  drivers/gpu/drm/drm_plane_helper.c       |   9 +-
>  drivers/gpu/drm/drm_probe_helper.c       |  14 +--
>  include/drm/drm_atomic_helper.h          |  13 +--
>  include/drm/drm_dp_mst_helper.h          |   7 +-
>  include/drm/drm_flip_work.h              |   2 +-
>  include/drm/drm_modeset_helper_vtables.h | 146 ++++++++++++++++---------------
>  include/drm/drm_simple_kms_helper.h      |  12 +--
>  11 files changed, 197 insertions(+), 181 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> index 1f0cd7e715c9..5e512dd3a2c4 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -458,22 +458,25 @@ mode_fixup(struct drm_atomic_state *state)
>   * Check the state object to see if the requested state is physically possible.
>   * This does all the crtc and connector related computations for an atomic
>   * update and adds any additional connectors needed for full modesets and calls
> - * down into ->mode_fixup functions of the driver backend.
> - *
> - * crtc_state->mode_changed is set when the input mode is changed.
> - * crtc_state->connectors_changed is set when a connector is added or
> - * removed from the crtc.
> - * crtc_state->active_changed is set when crtc_state->active changes,
> - * which is used for dpms.
> + * down into &drm_crtc_helper_funcs.mode_fixup and
> + * &drm_encoder_helper_funcs.mode_fixup or
> + * &drm_encoder_helper_funcs.atomic_check functions of the driver backend.
> + *
> + * &drm_crtc_state.mode_changed is set when the input mode is changed.
> + * &drm_crtc_state.connectors_changed is set when a connector is added or
> + * removed from the crtc.  &drm_crtc_state.active_changed is set when
> + * &drm_crtc_state.active changes, which is used for DPMS.
>   * See also: drm_atomic_crtc_needs_modeset()
>   *
>   * IMPORTANT:
>   *
> - * Drivers which set ->mode_changed (e.g. in their ->atomic_check hooks if a
> - * plane update can't be done without a full modeset) _must_ call this function
> - * afterwards after that change. It is permitted to call this function multiple
> - * times for the same update, e.g. when the ->atomic_check functions depend upon
> - * the adjusted dotclock for fifo space allocation and watermark computation.
> + * Drivers which set &drm_crtc_state.mode_changed (e.g. in their
> + * &drm_plane_helper_funcs.atomic_check hooks if a plane update can't be done
> + * without a full modeset) _must_ call this function afterwards after that
> + * change. It is permitted to call this function multiple times for the same
> + * update, e.g. when the &drm_crtc_helper_funcs.atomic_check functions depend
> + * upon the adjusted dotclock for fifo space allocation and watermark
> + * computation.
>   *
>   * RETURNS:
>   * Zero for success or -errno
> @@ -584,9 +587,10 @@ EXPORT_SYMBOL(drm_atomic_helper_check_modeset);
>   *
>   * Check the state object to see if the requested state is physically possible.
>   * This does all the plane update related checks using by calling into the
> - * ->atomic_check hooks provided by the driver.
> + * &drm_crtc_helper_funcs.atomic_check and &drm_plane_helper_funcs.atomic_check
> + * hooks provided by the driver.
>   *
> - * It also sets crtc_state->planes_changed to indicate that a crtc has
> + * It also sets &drm_crtc_state.planes_changed to indicate that a crtc has
>   * updated planes.
>   *
>   * RETURNS:
> @@ -648,14 +652,15 @@ EXPORT_SYMBOL(drm_atomic_helper_check_planes);
>   * Check the state object to see if the requested state is physically possible.
>   * Only crtcs and planes have check callbacks, so for any additional (global)
>   * checking that a driver needs it can simply wrap that around this function.
> - * Drivers without such needs can directly use this as their ->atomic_check()
> - * callback.
> + * Drivers without such needs can directly use this as their
> + * &drm_mode_config_funcs.atomic_check callback.
>   *
>   * This just wraps the two parts of the state checking for planes and modeset
>   * state in the default order: First it calls drm_atomic_helper_check_modeset()
>   * and then drm_atomic_helper_check_planes(). The assumption is that the
> - * ->atomic_check functions depend upon an updated adjusted_mode.clock to
> - * e.g. properly compute watermarks.
> + * @drm_plane_helper_funcs.atomic_check and @drm_crtc_helper_funcs.atomic_check
> + * functions depend upon an updated adjusted_mode.clock to e.g. properly compute
> + * watermarks.
>   *
>   * RETURNS:
>   * Zero for success or -errno
> @@ -1125,8 +1130,8 @@ EXPORT_SYMBOL(drm_atomic_helper_wait_for_vblanks);
>   * drm_atomic_helper_commit_tail - commit atomic update to hardware
>   * @old_state: atomic state object with old state structures
>   *
> - * This is the default implemenation for the ->atomic_commit_tail() hook of the
> - * &drm_mode_config_helper_funcs vtable.
> + * This is the default implemenation for the
> + * &drm_mode_config_helper_funcs.atomic_commit_tail hook.

implementation

>   *
>   * Note that the default ordering of how the various stages are called is to
>   * match the legacy modeset helper library closest. One peculiarity of that is
> @@ -1203,8 +1208,8 @@ static void commit_work(struct work_struct *work)
>   * drm_atomic_helper_setup_commit() and related functions.
>   *
>   * Committing the actual hardware state is done through the
> - * ->atomic_commit_tail() callback of the &drm_mode_config_helper_funcs vtable,
> - * or it's default implementation drm_atomic_helper_commit_tail().
> + * &drm_mode_config_helper_funcs.atomic_commit_tail callback, or it's default
> + * implementation drm_atomic_helper_commit_tail().
>   *
>   * RETURNS:
>   * Zero for success or -errno.
> @@ -1373,14 +1378,15 @@ static void release_crtc_commit(struct completion *completion)
>   *
>   * This function prepares @state to be used by the atomic helper's support for
>   * nonblocking commits. Drivers using the nonblocking commit infrastructure
> - * should always call this function from their ->atomic_commit hook.
> + * should always call this function from their
> + * &drm_mode_config_funcs.atomic_commit hook.
>   *
>   * To be able to use this support drivers need to use a few more helper
>   * functions. drm_atomic_helper_wait_for_dependencies() must be called before
>   * actually committing the hardware state, and for nonblocking commits this call
>   * must be placed in the async worker. See also drm_atomic_helper_swap_state()
>   * and it's stall parameter, for when a driver's commit hooks look at the
> - * ->state pointers of &struct drm_crtc, &drm_plane or &drm_connector directly.
> + * &drm_crtc.state, &drm_plane.state or &drm_connector.state pointer directly.
>   *
>   * Completion of the hardware commit step must be signalled using
>   * drm_atomic_helper_commit_hw_done(). After this step the driver is not allowed
> @@ -1489,8 +1495,7 @@ static struct drm_crtc_commit *preceeding_commit(struct drm_crtc *crtc)
>   * This function waits for all preceeding commits that touch the same CRTC as
>   * @old_state to both be committed to the hardware (as signalled by
>   * drm_atomic_helper_commit_hw_done) and executed by the hardware (as signalled
> - * by calling drm_crtc_vblank_send_event on the event member of
> - * &drm_crtc_state).
> + * by calling drm_crtc_vblank_send_event on the &drm_crtc_state.event).

drm_crtc_vblank_send_event()

>   *
>   * This is part of the atomic helper support for nonblocking commits, see
>   * drm_atomic_helper_setup_commit() for an overview.
> @@ -1627,8 +1632,9 @@ EXPORT_SYMBOL(drm_atomic_helper_commit_cleanup_done);
>   * @state: atomic state object with new state structures
>   *
>   * This function prepares plane state, specifically framebuffers, for the new
> - * configuration. If any failure is encountered this function will call
> - * ->cleanup_fb on any already successfully prepared framebuffer.
> + * configuration, by calling &drm_plane_helper_funcs.prepare_fb. If any failure
> + * is encountered this function will call &drm_plane_helper_funcs.cleanup_fb on
> + * any already successfully prepared framebuffer.
>   *
>   * Returns:
>   * 0 on success, negative error code on failure.
> @@ -1708,10 +1714,10 @@ static bool plane_crtc_active(const struct drm_plane_state *state)
>   *
>   * Drivers may set the NO_DISABLE_AFTER_MODESET flag in @flags if the relevant
>   * display controllers require to disable a CRTC's planes when the CRTC is
> - * disabled. This function would skip the ->atomic_disable call for a plane if
> - * the CRTC of the old plane state needs a modesetting operation. Of course,
> - * the drivers need to disable the planes in their CRTC disable callbacks
> - * since no one else would do that.
> + * disabled. This function would skip the &drm_plane_helper_funcs.atomic_disable
> + * call for a plane if the CRTC of the old plane state needs a modesetting
> + * operation. Of course, the drivers need to disable the planes in their CRTC
> + * disable callbacks since no one else would do that.
>   *
>   * The drm_atomic_helper_commit() default implementation doesn't set the
>   * ACTIVE_ONLY flag to most closely match the behaviour of the legacy helpers.
> @@ -1874,7 +1880,7 @@ EXPORT_SYMBOL(drm_atomic_helper_commit_planes_on_crtc);
>   * planes.
>   *
>   * It is a bug to call this function without having implemented the
> - * ->atomic_disable() plane hook.
> + * &drm_plane_helper_funcs.atomic_disable plane hook.
>   */
>  void
>  drm_atomic_helper_disable_planes_on_crtc(struct drm_crtc_state *old_crtc_state,
> @@ -1961,8 +1967,8 @@ EXPORT_SYMBOL(drm_atomic_helper_cleanup_planes);
>   * contains the old state. Also do any other cleanup required with that state.
>   *
>   * @stall must be set when nonblocking commits for this driver directly access
> - * the ->state pointer of &drm_plane, &drm_crtc or &drm_connector. With the
> - * current atomic helpers this is almost always the case, since the helpers
> + * the &drm_plane.state, &drm_crtc.state or &drm_connector.state pointer. With
> + * the current atomic helpers this is almost always the case, since the helpers
>   * don't pass the right state structures to the callbacks.
>   */
>  void drm_atomic_helper_swap_state(struct drm_atomic_state *state,
> @@ -2892,8 +2898,8 @@ EXPORT_SYMBOL(drm_atomic_helper_page_flip_target);
>   *
>   * This is the main helper function provided by the atomic helper framework for
>   * implementing the legacy DPMS connector interface. It computes the new desired
> - * ->active state for the corresponding CRTC (if the connector is enabled) and
> - * updates it.
> + * &drm_crtc_state.active state for the corresponding CRTC (if the connector is
> + * enabled) and updates it.
>   *
>   * Returns:
>   * Returns 0 on success, negative errno numbers on failure.
> @@ -2965,11 +2971,11 @@ int drm_atomic_helper_connector_dpms(struct drm_connector *connector,
>  EXPORT_SYMBOL(drm_atomic_helper_connector_dpms);
>  
>  /**
> - * drm_atomic_helper_best_encoder - Helper for &drm_connector_helper_funcs
> - *                                  ->best_encoder callback
> + * drm_atomic_helper_best_encoder - Helper for
> + * 	&drm_connector_helper_funcs.best_encoder callback
>   * @connector: Connector control structure
>   *
> - * This is a &drm_connector_helper_funcs ->best_encoder callback helper for
> + * This is a &drm_connector_helper_funcs.best_encoder callback helper for
>   * connectors that support exactly 1 encoder, statically determined at driver
>   * init time.
>   */
> @@ -3003,7 +3009,7 @@ EXPORT_SYMBOL(drm_atomic_helper_best_encoder);
>   */
>  
>  /**
> - * drm_atomic_helper_crtc_reset - default ->reset hook for CRTCs
> + * drm_atomic_helper_crtc_reset - default &drm_crtc_funcs.reset hook for CRTCs
>   * @crtc: drm CRTC
>   *
>   * Resets the atomic state for @crtc by freeing the state pointer (which might
> @@ -3110,7 +3116,7 @@ void drm_atomic_helper_crtc_destroy_state(struct drm_crtc *crtc,
>  EXPORT_SYMBOL(drm_atomic_helper_crtc_destroy_state);
>  
>  /**
> - * drm_atomic_helper_plane_reset - default ->reset hook for planes
> + * drm_atomic_helper_plane_reset - default &drm_plane_funcs.reset hook for planes
>   * @plane: drm plane
>   *
>   * Resets the atomic state for @plane by freeing the state pointer (which might
> @@ -3214,8 +3220,9 @@ EXPORT_SYMBOL(drm_atomic_helper_plane_destroy_state);
>   * @conn_state: connector state to assign
>   *
>   * Initializes the newly allocated @conn_state and assigns it to
> - * #connector ->state, usually required when initializing the drivers
> - * or when called from the ->reset hook.
> + * the &drm_conector->state pointer of @connector, usually required when
> + * initializing the drivers or when called from the &drm_connector_funcs.reset
> + * hook.
>   *
>   * This is useful for drivers that subclass the connector state.
>   */
> @@ -3231,7 +3238,7 @@ __drm_atomic_helper_connector_reset(struct drm_connector *connector,
>  EXPORT_SYMBOL(__drm_atomic_helper_connector_reset);
>  
>  /**
> - * drm_atomic_helper_connector_reset - default ->reset hook for connectors
> + * drm_atomic_helper_connector_reset - default &drm_connector_funcs.reset hook for connectors
>   * @connector: drm connector
>   *
>   * Resets the atomic state for @connector by freeing the state pointer (which
> diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
> index 1e281dd42e4b..8c1e4d93a4f4 100644
> --- a/drivers/gpu/drm/drm_crtc_helper.c
> +++ b/drivers/gpu/drm/drm_crtc_helper.c
> @@ -53,9 +53,9 @@
>   * configuration on resume with drm_helper_resume_force_mode().
>   *
>   * Note that this helper library doesn't track the current power state of CRTCs
> - * and encoders. It can call callbacks like ->dpms() even though the hardware is
> - * already in the desired state. This deficiency has been fixed in the atomic
> - * helpers.
> + * and encoders. It can call callbacks like &drm_encoder_helper_funcs.dpms even
> + * though the hardware is already in the desired state. This deficiency has been
> + * fixed in the atomic helpers.
>   *
>   * The driver callbacks are mostly compatible with the atomic modeset helpers,
>   * except for the handling of the primary plane: Atomic helpers require that the
> @@ -477,12 +477,12 @@ drm_crtc_helper_disable(struct drm_crtc *crtc)
>   * drm_crtc_helper_set_config - set a new config from userspace
>   * @set: mode set configuration
>   *
> - * The drm_crtc_helper_set_config() helper function implements the set_config
> - * callback of &struct drm_crtc_funcs for drivers using the legacy CRTC helpers.
> + * The drm_crtc_helper_set_config() helper function implements the of
> + * &drm_crtc_funcs.set_config callback for drivers using the legacy CRTC
> + * helpers.
>   *
>   * It first tries to locate the best encoder for each connector by calling the
> - * connector ->best_encoder() (&struct drm_connector_helper_funcs) helper
> - * operation.
> + * connector @drm_connector_helper_funcs.best_encoder helper operation.
>   *
>   * After locating the appropriate encoders, the helper function will call the
>   * mode_fixup encoder and CRTC helper operations to adjust the requested mode,
> @@ -493,8 +493,7 @@ drm_crtc_helper_disable(struct drm_crtc *crtc)
>   *
>   * If the adjusted mode is identical to the current mode but changes to the
>   * frame buffer need to be applied, the drm_crtc_helper_set_config() function
> - * will call the CRTC ->mode_set_base() (&struct drm_crtc_helper_funcs) helper
> - * operation.
> + * will call the CRTC &drm_crtc_helper_funcs.mode_set_base helper operation.
>   *
>   * If the adjusted mode differs from the current mode, or if the
>   * ->mode_set_base() helper operation is not provided, the helper function
> @@ -851,14 +850,15 @@ static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc)
>   * @connector: affected connector
>   * @mode: DPMS mode
>   *
> - * The drm_helper_connector_dpms() helper function implements the ->dpms()
> - * callback of &struct drm_connector_funcs for drivers using the legacy CRTC helpers.
> + * The drm_helper_connector_dpms() helper function implements the
> + * &drm_connector_funcs.dpms() callback for drivers using the legacy CRTC
> + * helpers.

You didn't use () in any of the others.

Otherwise looks good to me:

Rewiewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>

Gustavo
Daniel Vetter Jan. 25, 2017, 3:19 p.m. UTC | #2
On Wed, Jan 25, 2017 at 10:48:53AM -0200, Gustavo Padovan wrote:
> Otherwise looks good to me:

Nice catches, fixed them all and applied it.
> 
> Rewiewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>

Thanks for your review.
-Daniel

Patch
diff mbox

diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 1f0cd7e715c9..5e512dd3a2c4 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -458,22 +458,25 @@  mode_fixup(struct drm_atomic_state *state)
  * Check the state object to see if the requested state is physically possible.
  * This does all the crtc and connector related computations for an atomic
  * update and adds any additional connectors needed for full modesets and calls
- * down into ->mode_fixup functions of the driver backend.
- *
- * crtc_state->mode_changed is set when the input mode is changed.
- * crtc_state->connectors_changed is set when a connector is added or
- * removed from the crtc.
- * crtc_state->active_changed is set when crtc_state->active changes,
- * which is used for dpms.
+ * down into &drm_crtc_helper_funcs.mode_fixup and
+ * &drm_encoder_helper_funcs.mode_fixup or
+ * &drm_encoder_helper_funcs.atomic_check functions of the driver backend.
+ *
+ * &drm_crtc_state.mode_changed is set when the input mode is changed.
+ * &drm_crtc_state.connectors_changed is set when a connector is added or
+ * removed from the crtc.  &drm_crtc_state.active_changed is set when
+ * &drm_crtc_state.active changes, which is used for DPMS.
  * See also: drm_atomic_crtc_needs_modeset()
  *
  * IMPORTANT:
  *
- * Drivers which set ->mode_changed (e.g. in their ->atomic_check hooks if a
- * plane update can't be done without a full modeset) _must_ call this function
- * afterwards after that change. It is permitted to call this function multiple
- * times for the same update, e.g. when the ->atomic_check functions depend upon
- * the adjusted dotclock for fifo space allocation and watermark computation.
+ * Drivers which set &drm_crtc_state.mode_changed (e.g. in their
+ * &drm_plane_helper_funcs.atomic_check hooks if a plane update can't be done
+ * without a full modeset) _must_ call this function afterwards after that
+ * change. It is permitted to call this function multiple times for the same
+ * update, e.g. when the &drm_crtc_helper_funcs.atomic_check functions depend
+ * upon the adjusted dotclock for fifo space allocation and watermark
+ * computation.
  *
  * RETURNS:
  * Zero for success or -errno
@@ -584,9 +587,10 @@  EXPORT_SYMBOL(drm_atomic_helper_check_modeset);
  *
  * Check the state object to see if the requested state is physically possible.
  * This does all the plane update related checks using by calling into the
- * ->atomic_check hooks provided by the driver.
+ * &drm_crtc_helper_funcs.atomic_check and &drm_plane_helper_funcs.atomic_check
+ * hooks provided by the driver.
  *
- * It also sets crtc_state->planes_changed to indicate that a crtc has
+ * It also sets &drm_crtc_state.planes_changed to indicate that a crtc has
  * updated planes.
  *
  * RETURNS:
@@ -648,14 +652,15 @@  EXPORT_SYMBOL(drm_atomic_helper_check_planes);
  * Check the state object to see if the requested state is physically possible.
  * Only crtcs and planes have check callbacks, so for any additional (global)
  * checking that a driver needs it can simply wrap that around this function.
- * Drivers without such needs can directly use this as their ->atomic_check()
- * callback.
+ * Drivers without such needs can directly use this as their
+ * &drm_mode_config_funcs.atomic_check callback.
  *
  * This just wraps the two parts of the state checking for planes and modeset
  * state in the default order: First it calls drm_atomic_helper_check_modeset()
  * and then drm_atomic_helper_check_planes(). The assumption is that the
- * ->atomic_check functions depend upon an updated adjusted_mode.clock to
- * e.g. properly compute watermarks.
+ * @drm_plane_helper_funcs.atomic_check and @drm_crtc_helper_funcs.atomic_check
+ * functions depend upon an updated adjusted_mode.clock to e.g. properly compute
+ * watermarks.
  *
  * RETURNS:
  * Zero for success or -errno
@@ -1125,8 +1130,8 @@  EXPORT_SYMBOL(drm_atomic_helper_wait_for_vblanks);
  * drm_atomic_helper_commit_tail - commit atomic update to hardware
  * @old_state: atomic state object with old state structures
  *
- * This is the default implemenation for the ->atomic_commit_tail() hook of the
- * &drm_mode_config_helper_funcs vtable.
+ * This is the default implemenation for the
+ * &drm_mode_config_helper_funcs.atomic_commit_tail hook.
  *
  * Note that the default ordering of how the various stages are called is to
  * match the legacy modeset helper library closest. One peculiarity of that is
@@ -1203,8 +1208,8 @@  static void commit_work(struct work_struct *work)
  * drm_atomic_helper_setup_commit() and related functions.
  *
  * Committing the actual hardware state is done through the
- * ->atomic_commit_tail() callback of the &drm_mode_config_helper_funcs vtable,
- * or it's default implementation drm_atomic_helper_commit_tail().
+ * &drm_mode_config_helper_funcs.atomic_commit_tail callback, or it's default
+ * implementation drm_atomic_helper_commit_tail().
  *
  * RETURNS:
  * Zero for success or -errno.
@@ -1373,14 +1378,15 @@  static void release_crtc_commit(struct completion *completion)
  *
  * This function prepares @state to be used by the atomic helper's support for
  * nonblocking commits. Drivers using the nonblocking commit infrastructure
- * should always call this function from their ->atomic_commit hook.
+ * should always call this function from their
+ * &drm_mode_config_funcs.atomic_commit hook.
  *
  * To be able to use this support drivers need to use a few more helper
  * functions. drm_atomic_helper_wait_for_dependencies() must be called before
  * actually committing the hardware state, and for nonblocking commits this call
  * must be placed in the async worker. See also drm_atomic_helper_swap_state()
  * and it's stall parameter, for when a driver's commit hooks look at the
- * ->state pointers of &struct drm_crtc, &drm_plane or &drm_connector directly.
+ * &drm_crtc.state, &drm_plane.state or &drm_connector.state pointer directly.
  *
  * Completion of the hardware commit step must be signalled using
  * drm_atomic_helper_commit_hw_done(). After this step the driver is not allowed
@@ -1489,8 +1495,7 @@  static struct drm_crtc_commit *preceeding_commit(struct drm_crtc *crtc)
  * This function waits for all preceeding commits that touch the same CRTC as
  * @old_state to both be committed to the hardware (as signalled by
  * drm_atomic_helper_commit_hw_done) and executed by the hardware (as signalled
- * by calling drm_crtc_vblank_send_event on the event member of
- * &drm_crtc_state).
+ * by calling drm_crtc_vblank_send_event on the &drm_crtc_state.event).
  *
  * This is part of the atomic helper support for nonblocking commits, see
  * drm_atomic_helper_setup_commit() for an overview.
@@ -1627,8 +1632,9 @@  EXPORT_SYMBOL(drm_atomic_helper_commit_cleanup_done);
  * @state: atomic state object with new state structures
  *
  * This function prepares plane state, specifically framebuffers, for the new
- * configuration. If any failure is encountered this function will call
- * ->cleanup_fb on any already successfully prepared framebuffer.
+ * configuration, by calling &drm_plane_helper_funcs.prepare_fb. If any failure
+ * is encountered this function will call &drm_plane_helper_funcs.cleanup_fb on
+ * any already successfully prepared framebuffer.
  *
  * Returns:
  * 0 on success, negative error code on failure.
@@ -1708,10 +1714,10 @@  static bool plane_crtc_active(const struct drm_plane_state *state)
  *
  * Drivers may set the NO_DISABLE_AFTER_MODESET flag in @flags if the relevant
  * display controllers require to disable a CRTC's planes when the CRTC is
- * disabled. This function would skip the ->atomic_disable call for a plane if
- * the CRTC of the old plane state needs a modesetting operation. Of course,
- * the drivers need to disable the planes in their CRTC disable callbacks
- * since no one else would do that.
+ * disabled. This function would skip the &drm_plane_helper_funcs.atomic_disable
+ * call for a plane if the CRTC of the old plane state needs a modesetting
+ * operation. Of course, the drivers need to disable the planes in their CRTC
+ * disable callbacks since no one else would do that.
  *
  * The drm_atomic_helper_commit() default implementation doesn't set the
  * ACTIVE_ONLY flag to most closely match the behaviour of the legacy helpers.
@@ -1874,7 +1880,7 @@  EXPORT_SYMBOL(drm_atomic_helper_commit_planes_on_crtc);
  * planes.
  *
  * It is a bug to call this function without having implemented the
- * ->atomic_disable() plane hook.
+ * &drm_plane_helper_funcs.atomic_disable plane hook.
  */
 void
 drm_atomic_helper_disable_planes_on_crtc(struct drm_crtc_state *old_crtc_state,
@@ -1961,8 +1967,8 @@  EXPORT_SYMBOL(drm_atomic_helper_cleanup_planes);
  * contains the old state. Also do any other cleanup required with that state.
  *
  * @stall must be set when nonblocking commits for this driver directly access
- * the ->state pointer of &drm_plane, &drm_crtc or &drm_connector. With the
- * current atomic helpers this is almost always the case, since the helpers
+ * the &drm_plane.state, &drm_crtc.state or &drm_connector.state pointer. With
+ * the current atomic helpers this is almost always the case, since the helpers
  * don't pass the right state structures to the callbacks.
  */
 void drm_atomic_helper_swap_state(struct drm_atomic_state *state,
@@ -2892,8 +2898,8 @@  EXPORT_SYMBOL(drm_atomic_helper_page_flip_target);
  *
  * This is the main helper function provided by the atomic helper framework for
  * implementing the legacy DPMS connector interface. It computes the new desired
- * ->active state for the corresponding CRTC (if the connector is enabled) and
- * updates it.
+ * &drm_crtc_state.active state for the corresponding CRTC (if the connector is
+ * enabled) and updates it.
  *
  * Returns:
  * Returns 0 on success, negative errno numbers on failure.
@@ -2965,11 +2971,11 @@  int drm_atomic_helper_connector_dpms(struct drm_connector *connector,
 EXPORT_SYMBOL(drm_atomic_helper_connector_dpms);
 
 /**
- * drm_atomic_helper_best_encoder - Helper for &drm_connector_helper_funcs
- *                                  ->best_encoder callback
+ * drm_atomic_helper_best_encoder - Helper for
+ * 	&drm_connector_helper_funcs.best_encoder callback
  * @connector: Connector control structure
  *
- * This is a &drm_connector_helper_funcs ->best_encoder callback helper for
+ * This is a &drm_connector_helper_funcs.best_encoder callback helper for
  * connectors that support exactly 1 encoder, statically determined at driver
  * init time.
  */
@@ -3003,7 +3009,7 @@  EXPORT_SYMBOL(drm_atomic_helper_best_encoder);
  */
 
 /**
- * drm_atomic_helper_crtc_reset - default ->reset hook for CRTCs
+ * drm_atomic_helper_crtc_reset - default &drm_crtc_funcs.reset hook for CRTCs
  * @crtc: drm CRTC
  *
  * Resets the atomic state for @crtc by freeing the state pointer (which might
@@ -3110,7 +3116,7 @@  void drm_atomic_helper_crtc_destroy_state(struct drm_crtc *crtc,
 EXPORT_SYMBOL(drm_atomic_helper_crtc_destroy_state);
 
 /**
- * drm_atomic_helper_plane_reset - default ->reset hook for planes
+ * drm_atomic_helper_plane_reset - default &drm_plane_funcs.reset hook for planes
  * @plane: drm plane
  *
  * Resets the atomic state for @plane by freeing the state pointer (which might
@@ -3214,8 +3220,9 @@  EXPORT_SYMBOL(drm_atomic_helper_plane_destroy_state);
  * @conn_state: connector state to assign
  *
  * Initializes the newly allocated @conn_state and assigns it to
- * #connector ->state, usually required when initializing the drivers
- * or when called from the ->reset hook.
+ * the &drm_conector->state pointer of @connector, usually required when
+ * initializing the drivers or when called from the &drm_connector_funcs.reset
+ * hook.
  *
  * This is useful for drivers that subclass the connector state.
  */
@@ -3231,7 +3238,7 @@  __drm_atomic_helper_connector_reset(struct drm_connector *connector,
 EXPORT_SYMBOL(__drm_atomic_helper_connector_reset);
 
 /**
- * drm_atomic_helper_connector_reset - default ->reset hook for connectors
+ * drm_atomic_helper_connector_reset - default &drm_connector_funcs.reset hook for connectors
  * @connector: drm connector
  *
  * Resets the atomic state for @connector by freeing the state pointer (which
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 1e281dd42e4b..8c1e4d93a4f4 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -53,9 +53,9 @@ 
  * configuration on resume with drm_helper_resume_force_mode().
  *
  * Note that this helper library doesn't track the current power state of CRTCs
- * and encoders. It can call callbacks like ->dpms() even though the hardware is
- * already in the desired state. This deficiency has been fixed in the atomic
- * helpers.
+ * and encoders. It can call callbacks like &drm_encoder_helper_funcs.dpms even
+ * though the hardware is already in the desired state. This deficiency has been
+ * fixed in the atomic helpers.
  *
  * The driver callbacks are mostly compatible with the atomic modeset helpers,
  * except for the handling of the primary plane: Atomic helpers require that the
@@ -477,12 +477,12 @@  drm_crtc_helper_disable(struct drm_crtc *crtc)
  * drm_crtc_helper_set_config - set a new config from userspace
  * @set: mode set configuration
  *
- * The drm_crtc_helper_set_config() helper function implements the set_config
- * callback of &struct drm_crtc_funcs for drivers using the legacy CRTC helpers.
+ * The drm_crtc_helper_set_config() helper function implements the of
+ * &drm_crtc_funcs.set_config callback for drivers using the legacy CRTC
+ * helpers.
  *
  * It first tries to locate the best encoder for each connector by calling the
- * connector ->best_encoder() (&struct drm_connector_helper_funcs) helper
- * operation.
+ * connector @drm_connector_helper_funcs.best_encoder helper operation.
  *
  * After locating the appropriate encoders, the helper function will call the
  * mode_fixup encoder and CRTC helper operations to adjust the requested mode,
@@ -493,8 +493,7 @@  drm_crtc_helper_disable(struct drm_crtc *crtc)
  *
  * If the adjusted mode is identical to the current mode but changes to the
  * frame buffer need to be applied, the drm_crtc_helper_set_config() function
- * will call the CRTC ->mode_set_base() (&struct drm_crtc_helper_funcs) helper
- * operation.
+ * will call the CRTC &drm_crtc_helper_funcs.mode_set_base helper operation.
  *
  * If the adjusted mode differs from the current mode, or if the
  * ->mode_set_base() helper operation is not provided, the helper function
@@ -851,14 +850,15 @@  static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc)
  * @connector: affected connector
  * @mode: DPMS mode
  *
- * The drm_helper_connector_dpms() helper function implements the ->dpms()
- * callback of &struct drm_connector_funcs for drivers using the legacy CRTC helpers.
+ * The drm_helper_connector_dpms() helper function implements the
+ * &drm_connector_funcs.dpms() callback for drivers using the legacy CRTC
+ * helpers.
  *
  * This is the main helper function provided by the CRTC helper framework for
  * implementing the DPMS connector attribute. It computes the new desired DPMS
- * state for all encoders and CRTCs in the output mesh and calls the ->dpms()
- * callbacks provided by the driver in &struct drm_crtc_helper_funcs and struct
- * &drm_encoder_helper_funcs appropriately.
+ * state for all encoders and CRTCs in the output mesh and calls the
+ * &drm_crtc_helper_funcs.dpms and &drm_encoder_helper_funcs.dpms callbacks
+ * provided by the driver.
  *
  * This function is deprecated.  New drivers must implement atomic modeset
  * support, for which this function is unsuitable. Instead drivers should use
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index 3e6fe82c6d64..68908c1d5ca1 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -725,7 +725,7 @@  MODULE_PARM_DESC(dp_aux_i2c_speed_khz,
 /*
  * Transfer a single I2C-over-AUX message and handle various error conditions,
  * retrying the transaction as appropriate.  It is assumed that the
- * aux->transfer function does not modify anything in the msg other than the
+ * &drm_dp_aux.transfer function does not modify anything in the msg other than the
  * reply field.
  *
  * Returns bytes transferred on success, or a negative error code on failure.
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 0ab6aaacb7d6..c7fafa175755 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -66,11 +66,11 @@  static DEFINE_MUTEX(kernel_fb_helper_lock);
  * Teardown is done with drm_fb_helper_fini().
  *
  * At runtime drivers should restore the fbdev console by calling
- * drm_fb_helper_restore_fbdev_mode_unlocked() from their ->lastclose callback.
- * They should also notify the fb helper code from updates to the output
- * configuration by calling drm_fb_helper_hotplug_event(). For easier
+ * drm_fb_helper_restore_fbdev_mode_unlocked() from their &drm_driver.lastclose
+ * callback.  They should also notify the fb helper code from updates to the
+ * output configuration by calling drm_fb_helper_hotplug_event(). For easier
  * integration with the output polling code in drm_crtc_helper.c the modeset
- * code provides a ->output_poll_changed callback.
+ * code provides a &drm_mode_config_funcs.output_poll_changed callback.
  *
  * All other functions exported by the fb helper library can be used to
  * implement the fbdev driver interface by the driver.
@@ -79,7 +79,7 @@  static DEFINE_MUTEX(kernel_fb_helper_lock);
  * hotplug detection using the fbdev helpers. The drm_fb_helper_prepare()
  * helper must be called first to initialize the minimum required to make
  * hotplug detection work. Drivers also need to make sure to properly set up
- * the dev->mode_config.funcs member. After calling drm_kms_helper_poll_init()
+ * the &drm_mode_config.funcs member. After calling drm_kms_helper_poll_init()
  * it is safe to enable interrupts and start processing hotplug events. At the
  * same time, drivers should initialize all modeset objects such as CRTCs,
  * encoders and connectors. To finish up the fbdev helper initialization, the
@@ -88,9 +88,9 @@  static DEFINE_MUTEX(kernel_fb_helper_lock);
  * should call drm_fb_helper_single_add_all_connectors() followed by
  * drm_fb_helper_initial_config().
  *
- * If &drm_framebuffer_funcs ->dirty is set, the
+ * If &drm_framebuffer_funcs.dirty is set, the
  * drm_fb_helper_{cfb,sys}_{write,fillrect,copyarea,imageblit} functions will
- * accumulate changes and schedule &drm_fb_helper ->dirty_work to run right
+ * accumulate changes and schedule &drm_fb_helper.dirty_work to run right
  * away. This worker then calls the dirty() function ensuring that it will
  * always run in process context since the fb_*() function could be running in
  * atomic context. If drm_fb_helper_deferred_io() is used as the deferred_io
@@ -247,7 +247,7 @@  static void drm_fb_helper_restore_lut_atomic(struct drm_crtc *crtc)
 }
 
 /**
- * drm_fb_helper_debug_enter - implementation for ->fb_debug_enter
+ * drm_fb_helper_debug_enter - implementation for &fb_ops.fb_debug_enter
  * @info: fbdev registered by the helper
  */
 int drm_fb_helper_debug_enter(struct fb_info *info)
@@ -296,7 +296,7 @@  static struct drm_framebuffer *drm_mode_config_fb(struct drm_crtc *crtc)
 }
 
 /**
- * drm_fb_helper_debug_leave - implementation for ->fb_debug_leave
+ * drm_fb_helper_debug_leave - implementation for &fb_ops.fb_debug_leave
  * @info: fbdev registered by the helper
  */
 int drm_fb_helper_debug_leave(struct fb_info *info)
@@ -445,7 +445,7 @@  static int restore_fbdev_mode(struct drm_fb_helper *fb_helper)
  * drm_fb_helper_restore_fbdev_mode_unlocked - restore fbdev configuration
  * @fb_helper: fbcon to restore
  *
- * This should be called from driver's drm ->lastclose callback
+ * This should be called from driver's drm &drm_driver.lastclose callback
  * when implementing an fbcon on top of kms using this helper. This ensures that
  * the user isn't greeted with a black screen when e.g. X dies.
  *
@@ -585,7 +585,7 @@  static void drm_fb_helper_dpms(struct fb_info *info, int dpms_mode)
 }
 
 /**
- * drm_fb_helper_blank - implementation for ->fb_blank
+ * drm_fb_helper_blank - implementation for &fb_ops.fb_blank
  * @blank: desired blanking state
  * @info: fbdev registered by the helper
  */
@@ -912,7 +912,7 @@  static void drm_fb_helper_dirty(struct fb_info *info, u32 x, u32 y,
  * @info: fb_info struct pointer
  * @pagelist: list of dirty mmap framebuffer pages
  *
- * This function is used as the &fb_deferred_io ->deferred_io
+ * This function is used as the &fb_deferred_io.deferred_io
  * callback function for flushing the fbdev mmap writes.
  */
 void drm_fb_helper_deferred_io(struct fb_info *info,
@@ -1103,7 +1103,7 @@  EXPORT_SYMBOL(drm_fb_helper_set_suspend);
  * due to all the printk activity.
  *
  * This function can be called multiple times with the same state since
- * &fb_info->state is checked to see if fbdev is running or not before locking.
+ * &fb_info.state is checked to see if fbdev is running or not before locking.
  *
  * Use drm_fb_helper_set_suspend() if you need to take the lock yourself.
  */
@@ -1181,7 +1181,7 @@  static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green,
 }
 
 /**
- * drm_fb_helper_setcmap - implementation for ->fb_setcmap
+ * drm_fb_helper_setcmap - implementation for &fb_ops.fb_setcmap
  * @cmap: cmap to set
  * @info: fbdev registered by the helper
  */
@@ -1238,7 +1238,7 @@  int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info)
 EXPORT_SYMBOL(drm_fb_helper_setcmap);
 
 /**
- * drm_fb_helper_check_var - implementation for ->fb_check_var
+ * drm_fb_helper_check_var - implementation for &fb_ops.fb_check_var
  * @var: screeninfo to check
  * @info: fbdev registered by the helper
  */
@@ -1338,7 +1338,7 @@  int drm_fb_helper_check_var(struct fb_var_screeninfo *var,
 EXPORT_SYMBOL(drm_fb_helper_check_var);
 
 /**
- * drm_fb_helper_set_par - implementation for ->fb_set_par
+ * drm_fb_helper_set_par - implementation for &fb_ops.fb_set_par
  * @info: fbdev registered by the helper
  *
  * This will let fbcon do the mode init and is called at initialization time by
@@ -1422,7 +1422,7 @@  static int pan_display_atomic(struct fb_var_screeninfo *var,
 }
 
 /**
- * drm_fb_helper_pan_display - implementation for ->fb_pan_display
+ * drm_fb_helper_pan_display - implementation for &fb_ops.fb_pan_display
  * @var: updated screen information
  * @info: fbdev registered by the helper
  */
@@ -1607,7 +1607,7 @@  static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper,
  * additional constraints need to set up their own limits.
  *
  * Drivers should call this (or their equivalent setup code) from their
- * ->fb_probe callback.
+ * &drm_fb_helper_funcs.fb_probe callback.
  */
 void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch,
 			    uint32_t depth)
@@ -1636,11 +1636,11 @@  EXPORT_SYMBOL(drm_fb_helper_fill_fix);
  * @fb_height: desired fb height
  *
  * Sets up the variable fbdev metainformation from the given fb helper instance
- * and the drm framebuffer allocated in fb_helper->fb.
+ * and the drm framebuffer allocated in &drm_fb_helper.fb.
  *
  * Drivers should call this (or their equivalent setup code) from their
- * ->fb_probe callback after having allocated the fbdev backing
- * storage framebuffer.
+ * &drm_fb_helper_funcs.fb_probe callback after having allocated the fbdev
+ * backing storage framebuffer.
  */
 void drm_fb_helper_fill_var(struct fb_info *info, struct drm_fb_helper *fb_helper,
 			    uint32_t fb_width, uint32_t fb_height)
@@ -2207,9 +2207,9 @@  static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
  * Note that this also registers the fbdev and so allows userspace to call into
  * the driver through the fbdev interfaces.
  *
- * This function will call down into the ->fb_probe callback to let
- * the driver allocate and initialize the fbdev info structure and the drm
- * framebuffer used to back the fbdev. drm_fb_helper_fill_var() and
+ * This function will call down into the &drm_fb_helper_funcs.fb_probe callback
+ * to let the driver allocate and initialize the fbdev info structure and the
+ * drm framebuffer used to back the fbdev. drm_fb_helper_fill_var() and
  * drm_fb_helper_fill_fix() are provided as helpers to setup simple default
  * values for the fbdev info structure.
  *
diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c
index 35d43607a47d..148688fb920a 100644
--- a/drivers/gpu/drm/drm_plane_helper.c
+++ b/drivers/gpu/drm/drm_plane_helper.c
@@ -39,9 +39,9 @@ 
  *
  * This helper library has two parts. The first part has support to implement
  * primary plane support on top of the normal CRTC configuration interface.
- * Since the legacy ->set_config interface ties the primary plane together with
- * the CRTC state this does not allow userspace to disable the primary plane
- * itself.  To avoid too much duplicated code use
+ * Since the legacy &drm_mode_config_funcs.set_config interface ties the primary
+ * plane together with the CRTC state this does not allow userspace to disable
+ * the primary plane itself.  To avoid too much duplicated code use
  * drm_plane_helper_check_update() which can be used to enforce the same
  * restrictions as primary planes had thus. The default primary plane only
  * expose XRBG8888 and ARGB8888 as valid pixel formats for the attached
@@ -384,7 +384,8 @@  EXPORT_SYMBOL(drm_primary_helper_update);
  * is called in response to a userspace SetPlane operation on the plane with a
  * NULL framebuffer parameter.  It unconditionally fails the disable call with
  * -EINVAL the only way to disable the primary plane without driver support is
- * to disable the entier CRTC. Which does not match the plane ->disable hook.
+ * to disable the entire CRTC. Which does not match the plane
+ * &drm_plane_funcs.disable_plane hook.
  *
  * Note that some hardware may be able to disable the primary plane without
  * disabling the whole CRTC.  Drivers for such hardware should provide their
diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 041a5504780f..93381454bdf7 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -43,7 +43,7 @@ 
  * DOC: output probing helper overview
  *
  * This library provides some helper code for output probing. It provides an
- * implementation of the core connector->fill_modes interface with
+ * implementation of the core &drm_connector_funcs.fill_modes interface with
  * drm_helper_probe_single_connector_modes.
  *
  * It also provides support for polling connectors with a work item and for
@@ -187,9 +187,9 @@  drm_connector_detect(struct drm_connector *connector, bool force)
  * be added to the connector's probed_modes list, then culled (based on validity
  * and the @maxX, @maxY parameters) and put into the normal modes list.
  *
- * Intended to be used as a generic implementation of the ->fill_modes()
- * @connector vfunc for drivers that use the CRTC helpers for output mode
- * filtering and detection.
+ * Intended to be used as a generic implementation of the
+ * &drm_connector_funcs.fill_modes() vfunc for drivers that use the CRTC helpers
+ * for output mode filtering and detection.
  *
  * The basic procedure is as follows
  *
@@ -201,7 +201,7 @@  drm_connector_detect(struct drm_connector *connector, bool force)
  *
  *    - debugfs 'override_edid' (used for testing only)
  *    - firmware EDID (drm_load_edid_firmware())
- *    - connector helper ->get_modes() vfunc
+ *    - &drm_connector_helper_funcs.get_modes vfunc
  *    - if the connector status is connector_status_connected, standard
  *      VESA DMT modes up to 1024x768 are automatically added
  *      (drm_add_modes_noedid())
@@ -222,8 +222,8 @@  drm_connector_detect(struct drm_connector *connector, bool force)
  *      (if specified)
  *    - drm_mode_validate_flag() checks the modes againt basic connector
  *      capabilites (interlace_allowed,doublescan_allowed,stereo_allowed)
- *    - the optional connector ->mode_valid() helper can perform driver and/or
- *      hardware specific checks
+ *    - the optional &drm_connector_helper_funcs.mode_valid helper can perform
+ *      driver and/or hardware specific checks
  *
  * 5. Any mode whose status is not OK is pruned from the connector's modes list,
  *    accompanied by a debug message indicating the reason for the mode's
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
index 9afcd3810785..d066e9491ae3 100644
--- a/include/drm/drm_atomic_helper.h
+++ b/include/drm/drm_atomic_helper.h
@@ -177,7 +177,8 @@  int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
  *
  * This iterates over the current state, useful (for example) when applying
  * atomic state after it has been checked and swapped.  To iterate over the
- * planes which *will* be attached (for ->atomic_check()) see
+ * planes which *will* be attached (more useful in code called from
+ * &drm_mode_config_funcs.atomic_check) see
  * drm_atomic_crtc_state_for_each_plane().
  */
 #define drm_atomic_crtc_for_each_plane(plane, crtc) \
@@ -189,8 +190,9 @@  int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
  * @crtc_state: the incoming crtc-state
  *
  * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be
- * attached if the specified state is applied.  Useful during (for example)
- * ->atomic_check() operations, to validate the incoming state.
+ * attached if the specified state is applied.  Useful during for example
+ * in code called from &drm_mode_config_funcs.atomic_check operations, to
+ * validate the incoming state.
  */
 #define drm_atomic_crtc_state_for_each_plane(plane, crtc_state) \
 	drm_for_each_plane_mask(plane, (crtc_state)->state->dev, (crtc_state)->plane_mask)
@@ -202,8 +204,9 @@  int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
  * @crtc_state: the incoming crtc-state
  *
  * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be
- * attached if the specified state is applied.  Useful during (for example)
- * ->atomic_check() operations, to validate the incoming state.
+ * attached if the specified state is applied.  Useful during for example
+ * in code called from &drm_mode_config_funcs.atomic_check operations, to
+ * validate the incoming state.
  *
  * Compared to just drm_atomic_crtc_state_for_each_plane() this also fills in a
  * const plane_state. This is useful when a driver just wants to peek at other
diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h
index 003207670597..551f519d84a3 100644
--- a/include/drm/drm_dp_mst_helper.h
+++ b/include/drm/drm_dp_mst_helper.h
@@ -493,8 +493,8 @@  struct drm_dp_mst_topology_mgr {
 	int total_pbn;
 
 	/**
-	 * @qlock: protects @tx_msg_downq, the tx_slots in struct
-	 * &drm_dp_mst_branch and txmsg->state once they are queued
+	 * @qlock: protects @tx_msg_downq, the &drm_dp_mst_branch.txslost and
+	 * &drm_dp_sideband_msg_tx.state once they are queued
 	 */
 	struct mutex qlock;
 	/**
@@ -508,8 +508,7 @@  struct drm_dp_mst_topology_mgr {
 	struct mutex payload_lock;
 	/**
 	 * @proposed_vcpis: Array of pointers for the new VCPI allocation. The
-	 * VCPI structure itself is embedded into the corresponding
-	 * &drm_dp_mst_port structure.
+	 * VCPI structure itself is &drm_dp_mst_port.vcpi.
 	 */
 	struct drm_dp_vcpi **proposed_vcpis;
 	/**
diff --git a/include/drm/drm_flip_work.h b/include/drm/drm_flip_work.h
index d387cf06ae05..21c3d512d25c 100644
--- a/include/drm/drm_flip_work.h
+++ b/include/drm/drm_flip_work.h
@@ -54,7 +54,7 @@  typedef void (*drm_flip_func_t)(struct drm_flip_work *work, void *val);
 /**
  * struct drm_flip_task - flip work task
  * @node: list entry element
- * @data: data to pass to work->func
+ * @data: data to pass to &drm_flip_work.func
  */
 struct drm_flip_task {
 	struct list_head node;
diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
index 46f5b349f059..091c42205667 100644
--- a/include/drm/drm_modeset_helper_vtables.h
+++ b/include/drm/drm_modeset_helper_vtables.h
@@ -111,9 +111,9 @@  struct drm_crtc_helper_funcs {
 	 * This callback is used to validate a mode. The parameter mode is the
 	 * display mode that userspace requested, adjusted_mode is the mode the
 	 * encoders need to be fed with. Note that this is the inverse semantics
-	 * of the meaning for the &drm_encoder and &drm_bridge
-	 * ->mode_fixup() functions. If the CRTC cannot support the requested
-	 * conversion from mode to adjusted_mode it should reject the modeset.
+	 * of the meaning for the &drm_encoder and &drm_bridge_funcs.mode_fixup
+	 * vfunc. If the CRTC cannot support the requested conversion from mode
+	 * to adjusted_mode it should reject the modeset.
 	 *
 	 * This function is used by both legacy CRTC helpers and atomic helpers.
 	 * With atomic helpers it is optional.
@@ -134,17 +134,18 @@  struct drm_crtc_helper_funcs {
 	 *
 	 * Also beware that neither core nor helpers filter modes before
 	 * passing them to the driver: While the list of modes that is
-	 * advertised to userspace is filtered using the connector's
-	 * ->mode_valid() callback, neither the core nor the helpers do any
-	 * filtering on modes passed in from userspace when setting a mode. It
-	 * is therefore possible for userspace to pass in a mode that was
-	 * previously filtered out using ->mode_valid() or add a custom mode
-	 * that wasn't probed from EDID or similar to begin with.  Even though
-	 * this is an advanced feature and rarely used nowadays, some users rely
-	 * on being able to specify modes manually so drivers must be prepared
-	 * to deal with it. Specifically this means that all drivers need not
-	 * only validate modes in ->mode_valid() but also in ->mode_fixup() to
-	 * make sure invalid modes passed in from userspace are rejected.
+	 * advertised to userspace is filtered using the
+	 * &drm_connector.mode_valid callback, neither the core nor the helpers
+	 * do any filtering on modes passed in from userspace when setting a
+	 * mode. It is therefore possible for userspace to pass in a mode that
+	 * was previously filtered out using &drm_connector.mode_valid or add a
+	 * custom mode that wasn't probed from EDID or similar to begin with.
+	 * Even though this is an advanced feature and rarely used nowadays,
+	 * some users rely on being able to specify modes manually so drivers
+	 * must be prepared to deal with it. Specifically this means that all
+	 * drivers need not only validate modes in &drm_connector.mode_valid but
+	 * also in this or in the &drm_encoder_helper_funcs.mode_fixup callback
+	 * to make sure invalid modes passed in from userspace are rejected.
 	 *
 	 * RETURNS:
 	 *
@@ -205,7 +206,7 @@  struct drm_crtc_helper_funcs {
 	 * optimized fast-path instead of a full mode set operation with all the
 	 * resulting flickering. If it is not present
 	 * drm_crtc_helper_set_config() will fall back to a full modeset, using
-	 * the ->mode_set() callback. Since it can't update other planes it's
+	 * the @mode_set callback. Since it can't update other planes it's
 	 * incompatible with atomic modeset support.
 	 *
 	 * This callback is only used by the CRTC helpers and deprecated.
@@ -238,8 +239,7 @@  struct drm_crtc_helper_funcs {
 	/**
 	 * @load_lut:
 	 *
-	 * Load a LUT prepared with the @gamma_set functions from
-	 * &drm_fb_helper_funcs.
+	 * Load a LUT prepared with the &drm_fb_helper_funcs.gamma_set vfunc.
 	 *
 	 * This callback is optional and is only used by the fbdev emulation
 	 * helpers.
@@ -257,10 +257,11 @@  struct drm_crtc_helper_funcs {
 	 *
 	 * This callback should be used to disable the CRTC. With the atomic
 	 * drivers it is called after all encoders connected to this CRTC have
-	 * been shut off already using their own ->disable hook. If that
-	 * sequence is too simple drivers can just add their own hooks and call
-	 * it from this CRTC callback here by looping over all encoders
-	 * connected to it using for_each_encoder_on_crtc().
+	 * been shut off already using their own
+	 * &drm_encoder_helper_funcs.disable hook. If that sequence is too
+	 * simple drivers can just add their own hooks and call it from this
+	 * CRTC callback here by looping over all encoders connected to it using
+	 * for_each_encoder_on_crtc().
 	 *
 	 * This hook is used both by legacy CRTC helpers and atomic helpers.
 	 * Atomic drivers don't need to implement it if there's no need to
@@ -289,10 +290,10 @@  struct drm_crtc_helper_funcs {
 	 *
 	 * This callback should be used to enable the CRTC. With the atomic
 	 * drivers it is called before all encoders connected to this CRTC are
-	 * enabled through the encoder's own ->enable hook.  If that sequence is
-	 * too simple drivers can just add their own hooks and call it from this
-	 * CRTC callback here by looping over all encoders connected to it using
-	 * for_each_encoder_on_crtc().
+	 * enabled through the encoder's own &drm_encoder_helper_funcs.enable
+	 * hook.  If that sequence is too simple drivers can just add their own
+	 * hooks and call it from this CRTC callback here by looping over all
+	 * encoders connected to it using for_each_encoder_on_crtc().
 	 *
 	 * This hook is used only by atomic helpers, for symmetry with @disable.
 	 * Atomic drivers don't need to implement it if there's no need to
@@ -316,16 +317,16 @@  struct drm_crtc_helper_funcs {
 	 * beforehand. This is calling order used by the default helper
 	 * implementation in drm_atomic_helper_check().
 	 *
-	 * When using drm_atomic_helper_check_planes() CRTCs' ->atomic_check()
-	 * hooks are called after the ones for planes, which allows drivers to
-	 * assign shared resources requested by planes in the CRTC callback
-	 * here. For more complicated dependencies the driver can call the provided
-	 * check helpers multiple times until the computed state has a final
-	 * configuration and everything has been checked.
+	 * When using drm_atomic_helper_check_planes() this hook is called
+	 * after the &drm_plane_helper_funcs.atomc_check hook for planes, which
+	 * allows drivers to assign shared resources requested by planes in this
+	 * callback here. For more complicated dependencies the driver can call
+	 * the provided check helpers multiple times until the computed state
+	 * has a final configuration and everything has been checked.
 	 *
 	 * This function is also allowed to inspect any other object's state and
 	 * can add more state objects to the atomic commit if needed. Care must
-	 * be taken though to ensure that state check&compute functions for
+	 * be taken though to ensure that state check and compute functions for
 	 * these added states are all called, and derived state in other objects
 	 * all updated. Again the recommendation is to just call check helpers
 	 * until a maximal configuration is reached.
@@ -400,10 +401,11 @@  struct drm_crtc_helper_funcs {
 	 *
 	 * This callback should be used to disable the CRTC. With the atomic
 	 * drivers it is called after all encoders connected to this CRTC have
-	 * been shut off already using their own ->disable hook. If that
-	 * sequence is too simple drivers can just add their own hooks and call
-	 * it from this CRTC callback here by looping over all encoders
-	 * connected to it using for_each_encoder_on_crtc().
+	 * been shut off already using their own
+	 * &drm_encoder_helper_funcs.disable hook. If that sequence is too
+	 * simple drivers can just add their own hooks and call it from this
+	 * CRTC callback here by looping over all encoders connected to it using
+	 * for_each_encoder_on_crtc().
 	 *
 	 * This hook is used only by atomic helpers. Atomic drivers don't
 	 * need to implement it if there's no need to disable anything at the
@@ -483,16 +485,18 @@  struct drm_encoder_helper_funcs {
 	 * Also beware that neither core nor helpers filter modes before
 	 * passing them to the driver: While the list of modes that is
 	 * advertised to userspace is filtered using the connector's
-	 * ->mode_valid() callback, neither the core nor the helpers do any
-	 * filtering on modes passed in from userspace when setting a mode. It
-	 * is therefore possible for userspace to pass in a mode that was
-	 * previously filtered out using ->mode_valid() or add a custom mode
-	 * that wasn't probed from EDID or similar to begin with.  Even though
-	 * this is an advanced feature and rarely used nowadays, some users rely
-	 * on being able to specify modes manually so drivers must be prepared
-	 * to deal with it. Specifically this means that all drivers need not
-	 * only validate modes in ->mode_valid() but also in ->mode_fixup() to
-	 * make sure invalid modes passed in from userspace are rejected.
+	 * &drm_connector_helper_funcs.mode_valid callback, neither the core nor
+	 * the helpers do any filtering on modes passed in from userspace when
+	 * setting a mode. It is therefore possible for userspace to pass in a
+	 * mode that was previously filtered out using
+	 * &drm_connector_helper_funcs.mode_valid or add a custom mode that
+	 * wasn't probed from EDID or similar to begin with.  Even though this
+	 * is an advanced feature and rarely used nowadays, some users rely on
+	 * being able to specify modes manually so drivers must be prepared to
+	 * deal with it. Specifically this means that all drivers need not only
+	 * validate modes in &drm_connector.mode_valid but also in this or in
+	 * the &drm_crtc_helper_funcs.mode_fixup callback to make sure
+	 * invalid modes passed in from userspace are rejected.
 	 *
 	 * RETURNS:
 	 *
@@ -544,7 +548,7 @@  struct drm_encoder_helper_funcs {
 	 * use this hook, because the helper library calls it only once and not
 	 * every time the display pipeline is suspend using either DPMS or the
 	 * new "ACTIVE" property. Such drivers should instead move all their
-	 * encoder setup into the ->enable() callback.
+	 * encoder setup into the @enable callback.
 	 *
 	 * This callback is used both by the legacy CRTC helpers and the atomic
 	 * modeset helpers. It is optional in the atomic helpers.
@@ -570,7 +574,7 @@  struct drm_encoder_helper_funcs {
 	 * use this hook, because the helper library calls it only once and not
 	 * every time the display pipeline is suspended using either DPMS or the
 	 * new "ACTIVE" property. Such drivers should instead move all their
-	 * encoder setup into the ->enable() callback.
+	 * encoder setup into the @enable callback.
 	 *
 	 * This callback is used by the atomic modeset helpers in place of the
 	 * @mode_set callback, if set by the driver. It is optional and should
@@ -621,10 +625,10 @@  struct drm_encoder_helper_funcs {
 	 *
 	 * This callback should be used to disable the encoder. With the atomic
 	 * drivers it is called before this encoder's CRTC has been shut off
-	 * using the CRTC's own ->disable hook.  If that sequence is too simple
-	 * drivers can just add their own driver private encoder hooks and call
-	 * them from CRTC's callback by looping over all encoders connected to
-	 * it using for_each_encoder_on_crtc().
+	 * using their own &drm_crtc_helper_funcs.disable hook.  If that
+	 * sequence is too simple drivers can just add their own driver private
+	 * encoder hooks and call them from CRTC's callback by looping over all
+	 * encoders connected to it using for_each_encoder_on_crtc().
 	 *
 	 * This hook is used both by legacy CRTC helpers and atomic helpers.
 	 * Atomic drivers don't need to implement it if there's no need to
@@ -651,10 +655,10 @@  struct drm_encoder_helper_funcs {
 	 *
 	 * This callback should be used to enable the encoder. With the atomic
 	 * drivers it is called after this encoder's CRTC has been enabled using
-	 * the CRTC's own ->enable hook.  If that sequence is too simple drivers
-	 * can just add their own driver private encoder hooks and call them
-	 * from CRTC's callback by looping over all encoders connected to it
-	 * using for_each_encoder_on_crtc().
+	 * their own &drm_crtc_helper_funcs.enable hook.  If that sequence is
+	 * too simple drivers can just add their own driver private encoder
+	 * hooks and call them from CRTC's callback by looping over all encoders
+	 * connected to it using for_each_encoder_on_crtc().
 	 *
 	 * This hook is used only by atomic helpers, for symmetry with @disable.
 	 * Atomic drivers don't need to implement it if there's no need to
@@ -716,7 +720,7 @@  struct drm_connector_helper_funcs {
 	 * @get_modes:
 	 *
 	 * This function should fill in all modes currently valid for the sink
-	 * into the connector->probed_modes list. It should also update the
+	 * into the &drm_connector.probed_modes list. It should also update the
 	 * EDID property by calling drm_mode_connector_update_edid_property().
 	 *
 	 * The usual way to implement this is to cache the EDID retrieved in the
@@ -725,8 +729,9 @@  struct drm_connector_helper_funcs {
 	 * them by calling drm_add_edid_modes(). But connectors that driver a
 	 * fixed panel can also manually add specific modes using
 	 * drm_mode_probed_add(). Drivers which manually add modes should also
-	 * make sure that the @display_info, @width_mm and @height_mm fields of the
-	 * &struct drm_connector are filled in.
+	 * make sure that the &drm_connector.display_info,
+	 * &drm_connector.width_mm and &drm_connector.height_mm fields are
+	 * filled in.
 	 *
 	 * Virtual drivers that just want some standard VESA mode with a given
 	 * resolution can call drm_add_modes_noedid(), and mark the preferred
@@ -735,7 +740,7 @@  struct drm_connector_helper_funcs {
 	 * Finally drivers that support audio probably want to update the ELD
 	 * data, too, using drm_edid_to_eld().
 	 *
-	 * This function is only called after the ->detect() hook has indicated
+	 * This function is only called after the @detect hook has indicated
 	 * that a sink is connected and when the EDID isn't overridden through
 	 * sysfs or the kernel commandline.
 	 *
@@ -768,8 +773,8 @@  struct drm_connector_helper_funcs {
 	 *
 	 * RETURNS:
 	 *
-	 * Either MODE_OK or one of the failure reasons in enum
-	 * &drm_mode_status.
+	 * Either &drm_mode_status.MODE_OK or one of the failure reasons in &enum
+	 * drm_mode_status.
 	 */
 	enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
 					   struct drm_display_mode *mode);
@@ -875,7 +880,7 @@  struct drm_plane_helper_funcs {
 	 * RETURNS:
 	 *
 	 * 0 on success or one of the following negative error codes allowed by
-	 * the atomic_commit hook in &drm_mode_config_funcs. When using helpers
+	 * the &drm_mode_config_funcs.atomic_commit vfunc. When using helpers
 	 * this callback is the only one which can fail an atomic commit,
 	 * everything else must complete successfully.
 	 */
@@ -898,7 +903,7 @@  struct drm_plane_helper_funcs {
 	 *
 	 * Drivers should check plane specific constraints in this hook.
 	 *
-	 * When using drm_atomic_helper_check_planes() plane's ->atomic_check()
+	 * When using drm_atomic_helper_check_planes() plane's @atomic_check
 	 * hooks are called before the ones for CRTCs, which allows drivers to
 	 * request shared resources that the CRTC controls here. For more
 	 * complicated dependencies the driver can call the provided check helpers
@@ -907,7 +912,7 @@  struct drm_plane_helper_funcs {
 	 *
 	 * This function is also allowed to inspect any other object's state and
 	 * can add more state objects to the atomic commit if needed. Care must
-	 * be taken though to ensure that state check&compute functions for
+	 * be taken though to ensure that state check and compute functions for
 	 * these added states are all called, and derived state in other objects
 	 * all updated. Again the recommendation is to just call check helpers
 	 * until a maximal configuration is reached.
@@ -936,8 +941,8 @@  struct drm_plane_helper_funcs {
 	 * @atomic_update:
 	 *
 	 * Drivers should use this function to update the plane state.  This
-	 * hook is called in-between the ->atomic_begin() and
-	 * ->atomic_flush() of &drm_crtc_helper_funcs.
+	 * hook is called in-between the &drm_crtc_helper_funcs.atomic_begin and
+	 * drm_crtc_helper_funcs.atomic_flush callbacks.
 	 *
 	 * Note that the power state of the display pipe when this function is
 	 * called depends upon the exact helpers and calling sequence the driver
@@ -953,14 +958,15 @@  struct drm_plane_helper_funcs {
 	 * @atomic_disable:
 	 *
 	 * Drivers should use this function to unconditionally disable a plane.
-	 * This hook is called in-between the ->atomic_begin() and
-	 * ->atomic_flush() of &drm_crtc_helper_funcs. It is an alternative to
+	 * This hook is called in-between the
+	 * &drm_crtc_helper_funcs.atomic_begin and
+	 * drm_crtc_helper_funcs.atomic_flush callbacks. It is an alternative to
 	 * @atomic_update, which will be called for disabling planes, too, if
 	 * the @atomic_disable hook isn't implemented.
 	 *
 	 * This hook is also useful to disable planes in preparation of a modeset,
 	 * by calling drm_atomic_helper_disable_planes_on_crtc() from the
-	 * ->disable() hook in &drm_crtc_helper_funcs.
+	 * &drm_crtc_helper_funcs.disable hook.
 	 *
 	 * Note that the power state of the display pipe when this function is
 	 * called depends upon the exact helpers and calling sequence the driver
diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h
index d138d08a48c1..fffbb95a0915 100644
--- a/include/drm/drm_simple_kms_helper.h
+++ b/include/drm/drm_simple_kms_helper.h
@@ -77,9 +77,9 @@  struct drm_simple_display_pipe_funcs {
 	/**
 	 * @prepare_fb:
 	 *
-	 * Optional, called by &struct drm_plane_helper_funcs ->prepare_fb .
-	 * Please read the documentation for the ->prepare_fb hook in
-	 * &struct drm_plane_helper_funcs for more details.
+	 * Optional, called by &drm_plane_helper_funcs.prepare_fb.  Please read
+	 * the documentation for the &drm_plane_helper_funcs.prepare_fb hook for
+	 * more details.
 	 */
 	int (*prepare_fb)(struct drm_simple_display_pipe *pipe,
 			  struct drm_plane_state *plane_state);
@@ -87,9 +87,9 @@  struct drm_simple_display_pipe_funcs {
 	/**
 	 * @cleanup_fb:
 	 *
-	 * Optional, called by &struct drm_plane_helper_funcs ->cleanup_fb .
-	 * Please read the documentation for the ->cleanup_fb hook in
-	 * &struct drm_plane_helper_funcs for more details.
+	 * Optional, called by &drm_plane_helper_funcs.cleanup_fb.  Please read
+	 * the documentation for the &drm_plane_helper_funcs.cleanup_fb hook for
+	 * more details.
 	 */
 	void (*cleanup_fb)(struct drm_simple_display_pipe *pipe,
 			   struct drm_plane_state *plane_state);