@@ -23,6 +23,7 @@
#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/platform_device.h>
+#include <linux/dmi.h>
#include <linux/slab.h>
#include <asm/cpu_device_id.h>
#include <asm/platform_sst_audio.h>
@@ -36,7 +37,8 @@
#include "../common/sst-acpi.h"
#define CHT_PLAT_CLK_3_HZ 19200000
-#define CHT_CODEC_DAI "rt5645-aif1"
+#define CHT_CODEC_DAI1 "rt5645-aif1"
+#define CHT_CODEC_DAI2 "rt5645-aif2"
struct cht_acpi_card {
char *codec_id;
@@ -51,13 +53,33 @@ struct cht_mc_private {
struct clk *mclk;
};
+#define CHT_RT5645_MAP(quirk) ((quirk) & 0xff)
+#define CHT_RT5645_SSP2_AIF2 BIT(16) /* default is using AIF1 */
+#define CHT_RT5645_SSP0_AIF1 BIT(17)
+#define CHT_RT5645_SSP0_AIF2 BIT(18)
+
+static unsigned long cht_rt5645_quirk = 0;
+
+static void log_quirks(struct device *dev)
+{
+ if (cht_rt5645_quirk & CHT_RT5645_SSP2_AIF2)
+ dev_info(dev, "quirk SSP2_AIF2 enabled");
+ if (cht_rt5645_quirk & CHT_RT5645_SSP0_AIF1)
+ dev_info(dev, "quirk SSP0_AIF1 enabled");
+ if (cht_rt5645_quirk & CHT_RT5645_SSP0_AIF2)
+ dev_info(dev, "quirk SSP0_AIF2 enabled");
+}
+
static inline struct snd_soc_dai *cht_get_codec_dai(struct snd_soc_card *card)
{
struct snd_soc_pcm_runtime *rtd;
list_for_each_entry(rtd, &card->rtd_list, list) {
- if (!strncmp(rtd->codec_dai->name, CHT_CODEC_DAI,
- strlen(CHT_CODEC_DAI)))
+ if (!strncmp(rtd->codec_dai->name, CHT_CODEC_DAI1,
+ strlen(CHT_CODEC_DAI1)))
+ return rtd->codec_dai;
+ if (!strncmp(rtd->codec_dai->name, CHT_CODEC_DAI2,
+ strlen(CHT_CODEC_DAI2)))
return rtd->codec_dai;
}
return NULL;
@@ -125,12 +147,6 @@ static const struct snd_soc_dapm_route cht_rt5645_audio_map[] = {
{"Headphone", NULL, "HPOR"},
{"Ext Spk", NULL, "SPOL"},
{"Ext Spk", NULL, "SPOR"},
- {"AIF1 Playback", NULL, "ssp2 Tx"},
- {"ssp2 Tx", NULL, "codec_out0"},
- {"ssp2 Tx", NULL, "codec_out1"},
- {"codec_in0", NULL, "ssp2 Rx" },
- {"codec_in1", NULL, "ssp2 Rx" },
- {"ssp2 Rx", NULL, "AIF1 Capture"},
{"Headphone", NULL, "Platform Clock"},
{"Headset Mic", NULL, "Platform Clock"},
{"Int Mic", NULL, "Platform Clock"},
@@ -146,16 +162,42 @@ static const struct snd_soc_dapm_route cht_rt5650_audio_map[] = {
{"Headphone", NULL, "HPOR"},
{"Ext Spk", NULL, "SPOL"},
{"Ext Spk", NULL, "SPOR"},
+ {"Headphone", NULL, "Platform Clock"},
+ {"Headset Mic", NULL, "Platform Clock"},
+ {"Int Mic", NULL, "Platform Clock"},
+ {"Ext Spk", NULL, "Platform Clock"},
+};
+
+static const struct snd_soc_dapm_route cht_rt5645_ssp2_aif1_map[] = {
{"AIF1 Playback", NULL, "ssp2 Tx"},
{"ssp2 Tx", NULL, "codec_out0"},
{"ssp2 Tx", NULL, "codec_out1"},
{"codec_in0", NULL, "ssp2 Rx" },
{"codec_in1", NULL, "ssp2 Rx" },
{"ssp2 Rx", NULL, "AIF1 Capture"},
- {"Headphone", NULL, "Platform Clock"},
- {"Headset Mic", NULL, "Platform Clock"},
- {"Int Mic", NULL, "Platform Clock"},
- {"Ext Spk", NULL, "Platform Clock"},
+};
+
+static const struct snd_soc_dapm_route cht_rt5645_ssp2_aif2_map[] = {
+ {"AIF2 Playback", NULL, "ssp2 Tx"},
+ {"ssp2 Tx", NULL, "codec_out0"},
+ {"ssp2 Tx", NULL, "codec_out1"},
+ {"codec_in0", NULL, "ssp2 Rx" },
+ {"codec_in1", NULL, "ssp2 Rx" },
+ {"ssp2 Rx", NULL, "AIF2 Capture"},
+};
+
+static const struct snd_soc_dapm_route cht_rt5645_ssp0_aif1_map[] = {
+ {"AIF1 Playback", NULL, "ssp0 Tx"},
+ {"ssp0 Tx", NULL, "modem_out"},
+ {"modem_in", NULL, "ssp0 Rx" },
+ {"ssp0 Rx", NULL, "AIF1 Capture"},
+};
+
+static const struct snd_soc_dapm_route cht_rt5645_ssp0_aif2_map[] = {
+ {"AIF2 Playback", NULL, "ssp0 Tx"},
+ {"ssp0 Tx", NULL, "modem_out"},
+ {"modem_in", NULL, "ssp0 Rx" },
+ {"ssp0 Rx", NULL, "AIF2 Capture"},
};
static const struct snd_kcontrol_new cht_mc_controls[] = {
@@ -201,11 +243,25 @@ static int cht_aif1_hw_params(struct snd_pcm_substream *substream,
return 0;
}
+/* uncomment when we have a real quirk
+static int cht_rt5645_quirk_cb(const struct dmi_system_id *id)
+{
+ cht_rt5645_quirk = (unsigned long)id->driver_data;
+ return 1;
+}
+*/
+
+static const struct dmi_system_id cht_rt5645_quirk_table[] = {
+ {
+ },
+};
+
static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
{
int ret;
int jack_type;
struct snd_soc_codec *codec = runtime->codec;
+ struct snd_soc_card *card = runtime->card;
struct snd_soc_dai *codec_dai = runtime->codec_dai;
struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card);
@@ -217,6 +273,26 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
RT5645_AD_STEREO_FILTER,
RT5645_CLK_SEL_I2S1_ASRC);
+ if (cht_rt5645_quirk & CHT_RT5645_SSP2_AIF2) {
+ ret = snd_soc_dapm_add_routes(&card->dapm,
+ cht_rt5645_ssp2_aif2_map,
+ ARRAY_SIZE(cht_rt5645_ssp2_aif2_map));
+ } else if (cht_rt5645_quirk & CHT_RT5645_SSP0_AIF1) {
+ ret = snd_soc_dapm_add_routes(&card->dapm,
+ cht_rt5645_ssp0_aif1_map,
+ ARRAY_SIZE(cht_rt5645_ssp0_aif1_map));
+ } else if (cht_rt5645_quirk & CHT_RT5645_SSP0_AIF2) {
+ ret = snd_soc_dapm_add_routes(&card->dapm,
+ cht_rt5645_ssp0_aif2_map,
+ ARRAY_SIZE(cht_rt5645_ssp0_aif2_map));
+ } else {
+ ret = snd_soc_dapm_add_routes(&card->dapm,
+ cht_rt5645_ssp2_aif1_map,
+ ARRAY_SIZE(cht_rt5645_ssp2_aif1_map));
+ }
+ if (ret)
+ return ret;
+
/* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */
ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xF, 0xF, 4, 24);
if (ret < 0) {
@@ -267,6 +343,7 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd,
struct snd_pcm_hw_params *params)
{
+ int ret;
struct snd_interval *rate = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_RATE);
struct snd_interval *channels = hw_param_interval(params,
@@ -276,8 +353,39 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd,
rate->min = rate->max = 48000;
channels->min = channels->max = 2;
- /* set SSP2 to 24-bit */
- params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+ if ((cht_rt5645_quirk & CHT_RT5645_SSP0_AIF1) ||
+ (cht_rt5645_quirk & CHT_RT5645_SSP0_AIF2)) {
+
+ /* set SSP0 to 16-bit */
+ params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
+
+ /*
+ * Default mode for SSP configuration is TDM 4 slot, override config
+ * with explicit setting to I2S 2ch 16-bit. The word length is set with
+ * dai_set_tdm_slot() since there is no other API exposed
+ */
+ ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_IF |
+ SND_SOC_DAIFMT_CBS_CFS
+ );
+ if (ret < 0) {
+ dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 16);
+ if (ret < 0) {
+ dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
+ return ret;
+ }
+
+ } else {
+
+ /* set SSP2 to 24-bit */
+ params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+
+ }
return 0;
}
@@ -385,7 +493,9 @@ static struct cht_acpi_card snd_soc_cards[] = {
{"10EC5650", CODEC_TYPE_RT5650, &snd_soc_card_chtrt5650},
};
-static char cht_rt5640_codec_name[16]; /* i2c-<HID>:00 with HID being 8 chars */
+static char cht_rt5645_codec_name[16]; /* i2c-<HID>:00 with HID being 8 chars */
+static char cht_rt5645_codec_aif_name[12]; /* = "rt5645-aif[1|2]" */
+static char cht_rt5645_cpu_dai_name[10]; /* = "ssp[0|2]-port" */
static bool is_valleyview(void)
{
@@ -399,6 +509,11 @@ static bool is_valleyview(void)
return true;
}
+struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */
+ u64 aif_value; /* 1: AIF1, 2: AIF2 */
+ u64 mclock_value; /* usually 25MHz (0x17d7940), ignored */
+};
+
static int snd_cht_mc_probe(struct platform_device *pdev)
{
int ret_val = 0;
@@ -409,6 +524,7 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
const char *i2c_name = NULL;
int dai_index = 0;
bool found = false;
+ bool is_bytcr = false;
drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_ATOMIC);
if (!drv)
@@ -446,9 +562,95 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
/* fixup codec name based on HID */
i2c_name = sst_acpi_find_name_from_hid(mach->id);
if (i2c_name != NULL) {
- snprintf(cht_rt5640_codec_name, sizeof(cht_rt5640_codec_name),
+ snprintf(cht_rt5645_codec_name, sizeof(cht_rt5645_codec_name),
"%s%s", "i2c-", i2c_name);
- cht_dailink[dai_index].codec_name = cht_rt5640_codec_name;
+ cht_dailink[dai_index].codec_name = cht_rt5645_codec_name;
+ }
+
+ /*
+ * swap SSP0 if bytcr is detected
+ * (will be overridden if DMI quirk is detected)
+ */
+ if (is_valleyview()) {
+ struct sst_platform_info *p_info = mach->pdata;
+ const struct sst_res_info *res_info = p_info->res_info;
+
+ if (res_info->acpi_ipc_irq_index == 0)
+ is_bytcr = true;
+ }
+
+ if (is_bytcr) {
+ /*
+ * Baytrail CR platforms may have CHAN package in BIOS, try
+ * to find relevant routing quirk based as done on Windows
+ * platforms. We have to read the information directly from the
+ * BIOS, at this stage the card is not created and the links
+ * with the codec driver/pdata are non-existent
+ */
+
+ struct acpi_chan_package chan_package;
+
+ /* format specified: 2 64-bit integers */
+ struct acpi_buffer format = {sizeof("NN"), "NN"};
+ struct acpi_buffer state = {0, NULL};
+ struct sst_acpi_package_context pkg_ctx;
+ bool pkg_found = false;
+
+ state.length = sizeof(chan_package);
+ state.pointer = &chan_package;
+
+ pkg_ctx.name = "CHAN";
+ pkg_ctx.length = 2;
+ pkg_ctx.format = &format;
+ pkg_ctx.state = &state;
+ pkg_ctx.data_valid = false;
+
+ pkg_found = sst_acpi_find_package_from_hid(mach->id, &pkg_ctx);
+ if (pkg_found) {
+ if (chan_package.aif_value == 1) {
+ dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n");
+ cht_rt5645_quirk |= CHT_RT5645_SSP0_AIF1;
+ } else if (chan_package.aif_value == 2) {
+ dev_info(&pdev->dev, "BIOS Routing: AIF2 connected\n");
+ cht_rt5645_quirk |= CHT_RT5645_SSP0_AIF2;
+ } else {
+ dev_info(&pdev->dev, "BIOS Routing isn't valid, ignored\n");
+ pkg_found = false;
+ }
+ }
+
+ if (!pkg_found) {
+ /* no BIOS indications, assume SSP0-AIF2 connection */
+ cht_rt5645_quirk |= CHT_RT5645_SSP0_AIF2;
+ }
+ }
+
+ /* check quirks before creating card */
+ dmi_check_system(cht_rt5645_quirk_table);
+ log_quirks(&pdev->dev);
+
+ if ((cht_rt5645_quirk & CHT_RT5645_SSP2_AIF2) ||
+ (cht_rt5645_quirk & CHT_RT5645_SSP0_AIF2)) {
+
+ /* fixup codec aif name */
+ snprintf(cht_rt5645_codec_aif_name,
+ sizeof(cht_rt5645_codec_aif_name),
+ "%s", "rt5645-aif2");
+
+ cht_dailink[dai_index].codec_dai_name =
+ cht_rt5645_codec_aif_name;
+ }
+
+ if ((cht_rt5645_quirk & CHT_RT5645_SSP0_AIF1) ||
+ (cht_rt5645_quirk & CHT_RT5645_SSP0_AIF2)) {
+
+ /* fixup cpu dai name name */
+ snprintf(cht_rt5645_cpu_dai_name,
+ sizeof(cht_rt5645_cpu_dai_name),
+ "%s", "ssp0-port");
+
+ cht_dailink[dai_index].cpu_dai_name =
+ cht_rt5645_cpu_dai_name;
}
if (is_valleyview()) {
This driver may be used on Baytrail CR platforms where SSP2 is not available. Add quirks and routing detection based on work done for RT5640. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> --- sound/soc/intel/boards/cht_bsw_rt5645.c | 238 +++++++++++++++++++++++++++++--- 1 file changed, 220 insertions(+), 18 deletions(-)