| Message ID | 1488813822-26042-4-git-send-email-d-gerlach@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, 6 Mar 2017 09:23:40 -0600 Dave Gerlach <d-gerlach@ti.com> wrote: > The operatings-points-v2 table for am4372 was merged before any user > of it was present in the kernel and before the binding had been > finalized. The new ti-cpufreq driver and binding expects the platform > specific properties to be part of the operating-points-v2 table > rather than the cpu node so let's move them there as the only user is > the ti-cpufreq driver. > > Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> > --- > arch/arm/boot/dts/am4372.dtsi | 7 +++---- > 1 file changed, 3 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/am4372.dtsi > b/arch/arm/boot/dts/am4372.dtsi index 97fcaf415de1..176e09e9a45e > 100644 --- a/arch/arm/boot/dts/am4372.dtsi > +++ b/arch/arm/boot/dts/am4372.dtsi > @@ -50,15 +50,14 @@ > clock-names = "cpu"; > > operating-points-v2 = <&cpu0_opp_table>; > - ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>; > - ti,syscon-rev = <&scm_conf 0x600>; > > clock-latency = <300000>; /* From > omap-cpufreq driver */ }; > }; > > - cpu0_opp_table: opp_table0 { > - compatible = "operating-points-v2"; > + cpu0_opp_table: opp-table { > + compatible = "operating-points-v2-ti-cpu"; > + syscon = <&scm_conf>; > > opp50@300000000 { > opp-hz = /bits/ 64 <300000000>; Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 97fcaf415de1..176e09e9a45e 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -50,15 +50,14 @@ clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; - ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>; - ti,syscon-rev = <&scm_conf 0x600>; clock-latency = <300000>; /* From omap-cpufreq driver */ }; }; - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; opp50@300000000 { opp-hz = /bits/ 64 <300000000>;
The operatings-points-v2 table for am4372 was merged before any user of it was present in the kernel and before the binding had been finalized. The new ti-cpufreq driver and binding expects the platform specific properties to be part of the operating-points-v2 table rather than the cpu node so let's move them there as the only user is the ti-cpufreq driver. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> --- arch/arm/boot/dts/am4372.dtsi | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)