diff mbox

[v4,15/23] dt-bindings: PCI: dra7xx: Add dt bindings to enable unaligned access

Message ID 20170313142259.25397-16-kishon@ti.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Kishon Vijay Abraham I March 13, 2017, 2:22 p.m. UTC
Update device tree binding documentation of TI's dra7xx PCI
controller to include property for enabling unaligned mem access.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 Documentation/devicetree/bindings/pci/ti-pci.txt | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Rob Herring March 20, 2017, 9:43 p.m. UTC | #1
On Mon, Mar 13, 2017 at 07:52:51PM +0530, Kishon Vijay Abraham I wrote:
> Update device tree binding documentation of TI's dra7xx PCI
> controller to include property for enabling unaligned mem access.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  Documentation/devicetree/bindings/pci/ti-pci.txt | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
> index 190828a5f32a..b69dd7dbd29e 100644
> --- a/Documentation/devicetree/bindings/pci/ti-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
> @@ -39,6 +39,11 @@ DEVICE MODE
>   - interrupts : one interrupt entries must be specified for main interrupt.
>   - num-ib-windows : number of inbound address translation windows
>   - num-ob-windows : number of outbound address translation windows
> + - ti,syscon-unaligned-access: phandle to the syscon dt node. The 1st argument
> +			       should contain the register offset within syscon
> +			       and the 2nd argument should contain the bit field
> +			       for setting the bit to enable unaligned
> +			       access.

This should be setup by the firmware/bootloader or some platform code. 
Why does the PCI host need to configure this?

Rob
Kishon Vijay Abraham I March 22, 2017, 2:37 p.m. UTC | #2
Hi Rob,

On Tuesday 21 March 2017 03:13 AM, Rob Herring wrote:
> On Mon, Mar 13, 2017 at 07:52:51PM +0530, Kishon Vijay Abraham I wrote:
>> Update device tree binding documentation of TI's dra7xx PCI
>> controller to include property for enabling unaligned mem access.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  Documentation/devicetree/bindings/pci/ti-pci.txt | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
>> index 190828a5f32a..b69dd7dbd29e 100644
>> --- a/Documentation/devicetree/bindings/pci/ti-pci.txt
>> +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
>> @@ -39,6 +39,11 @@ DEVICE MODE
>>   - interrupts : one interrupt entries must be specified for main interrupt.
>>   - num-ib-windows : number of inbound address translation windows
>>   - num-ob-windows : number of outbound address translation windows
>> + - ti,syscon-unaligned-access: phandle to the syscon dt node. The 1st argument
>> +			       should contain the register offset within syscon
>> +			       and the 2nd argument should contain the bit field
>> +			       for setting the bit to enable unaligned
>> +			       access.
> 
> This should be setup by the firmware/bootloader or some platform code. 
> Why does the PCI host need to configure this?

That would create a dependency between the bootloader and kernel which is
usually avoided in platforms like dra7xx.

Thanks
Kishon
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index 190828a5f32a..b69dd7dbd29e 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -39,6 +39,11 @@  DEVICE MODE
  - interrupts : one interrupt entries must be specified for main interrupt.
  - num-ib-windows : number of inbound address translation windows
  - num-ob-windows : number of outbound address translation windows
+ - ti,syscon-unaligned-access: phandle to the syscon dt node. The 1st argument
+			       should contain the register offset within syscon
+			       and the 2nd argument should contain the bit field
+			       for setting the bit to enable unaligned
+			       access.
 
 Optional Property:
  - gpios : Should be added if a gpio line is required to drive PERST# line