@@ -437,6 +437,17 @@ config INTEL_SOC_PMIC
thermal, charger and related power management functions
on these systems.
+config INTEL_SOC_PMIC_CHTWC
+ tristate "Support for Intel Cherry Trail Whiskey Cove PMIC"
+ depends on ACPI
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ Select this option to enable support for the Intel Cherry Trail
+ Whiskey Cove PMIC found on some Intel Cherry Trail systems.
+
config MFD_INTEL_LPSS
tristate
select COMMON_CLK
@@ -209,6 +209,7 @@ obj-$(CONFIG_MFD_SKY81452) += sky81452.o
intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
+obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o
obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
new file mode 100644
@@ -0,0 +1,243 @@
+/*
+ * MFD core driver for Intel Cherrytrail Whiskey Cove PMIC
+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on various non upstream patches to support the CHT Whiskey Cove PMIC:
+ * Copyright (C) 2013-2015 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+/* PMIC device registers */
+#define REG_OFFSET_MASK GENMASK(7, 0)
+#define REG_ADDR_MASK GENMASK(15, 8)
+#define REG_ADDR_SHIFT 8
+
+#define CHT_WC_IRQLVL1 0x6e02
+#define CHT_WC_IRQLVL1_MASK 0x6e0e
+
+/* Whiskey Cove PMIC share same ACPI ID between different platforms */
+#define CHT_WC_HRV 3
+
+/* Level 1 IRQs (level 2 IRQs are handled in the child device drivers) */
+enum {
+ CHT_WC_PWRSRC_IRQ = 0,
+ CHT_WC_THRM_IRQ,
+ CHT_WC_BCU_IRQ,
+ CHT_WC_ADC_IRQ,
+ CHT_WC_EXT_CHGR_IRQ,
+ CHT_WC_GPIO_IRQ,
+ /* There is no irq 6 */
+ CHT_WC_CRIT_IRQ = 7,
+};
+
+static struct resource cht_wc_pwrsrc_resources[] = {
+ DEFINE_RES_IRQ(CHT_WC_PWRSRC_IRQ),
+};
+
+static struct resource cht_wc_ext_charger_resources[] = {
+ DEFINE_RES_IRQ(CHT_WC_EXT_CHGR_IRQ),
+};
+
+static struct mfd_cell cht_wc_dev[] = {
+ {
+ .name = "cht_wcove_pwrsrc",
+ .num_resources = ARRAY_SIZE(cht_wc_pwrsrc_resources),
+ .resources = cht_wc_pwrsrc_resources,
+ },
+ {
+ .name = "cht_wcove_ext_chgr",
+ .num_resources = ARRAY_SIZE(cht_wc_ext_charger_resources),
+ .resources = cht_wc_ext_charger_resources,
+ },
+ {
+ .name = "cht_wcove_region",
+ },
+};
+
+/*
+ * The CHT Whiskey Cove covers multiple i2c addresses, with a 1 byte
+ * register address space per i2c address, so we use 16 bit register
+ * addresses where the high 8 bits contain the i2c client address.
+ */
+static int cht_wc_byte_reg_read(void *context, unsigned int reg,
+ unsigned int *val)
+{
+ struct i2c_client *client = context;
+ int ret, orig_addr = client->addr;
+
+ if (!(reg & REG_ADDR_MASK)) {
+ dev_err(&client->dev, "Error i2c address not specified\n");
+ return -EINVAL;
+ }
+
+ client->addr = (reg & REG_ADDR_MASK) >> REG_ADDR_SHIFT;
+ ret = i2c_smbus_read_byte_data(client, reg & REG_OFFSET_MASK);
+ client->addr = orig_addr;
+
+ if (ret < 0)
+ return ret;
+
+ *val = ret;
+ return 0;
+}
+
+static int cht_wc_byte_reg_write(void *context, unsigned int reg,
+ unsigned int val)
+{
+ struct i2c_client *client = context;
+ int ret, orig_addr = client->addr;
+
+ if (!(reg & REG_ADDR_MASK)) {
+ dev_err(&client->dev, "Error i2c address not specified\n");
+ return -EINVAL;
+ }
+
+ client->addr = (reg & REG_ADDR_MASK) >> REG_ADDR_SHIFT;
+ ret = i2c_smbus_write_byte_data(client, reg & REG_OFFSET_MASK, val);
+ client->addr = orig_addr;
+
+ return ret;
+}
+
+static const struct regmap_config cht_wc_regmap_cfg = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .reg_write = cht_wc_byte_reg_write,
+ .reg_read = cht_wc_byte_reg_read,
+};
+
+static const struct regmap_irq cht_wc_regmap_irqs[] = {
+ REGMAP_IRQ_REG(CHT_WC_PWRSRC_IRQ, 0, BIT(CHT_WC_PWRSRC_IRQ)),
+ REGMAP_IRQ_REG(CHT_WC_THRM_IRQ, 0, BIT(CHT_WC_THRM_IRQ)),
+ REGMAP_IRQ_REG(CHT_WC_BCU_IRQ, 0, BIT(CHT_WC_BCU_IRQ)),
+ REGMAP_IRQ_REG(CHT_WC_ADC_IRQ, 0, BIT(CHT_WC_ADC_IRQ)),
+ REGMAP_IRQ_REG(CHT_WC_EXT_CHGR_IRQ, 0, BIT(CHT_WC_EXT_CHGR_IRQ)),
+ REGMAP_IRQ_REG(CHT_WC_GPIO_IRQ, 0, BIT(CHT_WC_GPIO_IRQ)),
+ REGMAP_IRQ_REG(CHT_WC_CRIT_IRQ, 0, BIT(CHT_WC_CRIT_IRQ)),
+};
+
+static const struct regmap_irq_chip cht_wc_regmap_irq_chip = {
+ .name = "cht_wc_irq_chip",
+ .status_base = CHT_WC_IRQLVL1,
+ .mask_base = CHT_WC_IRQLVL1_MASK,
+ .irqs = cht_wc_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(cht_wc_regmap_irqs),
+ .num_regs = 1,
+};
+
+static int cht_wc_probe(struct i2c_client *client,
+ const struct i2c_device_id *i2c_id)
+{
+ struct device *dev = &client->dev;
+ struct intel_soc_pmic *pmic;
+ acpi_status status;
+ unsigned long long hrv;
+ int ret;
+
+ status = acpi_evaluate_integer(ACPI_HANDLE(dev), "_HRV", NULL, &hrv);
+ if (ACPI_FAILURE(status)) {
+ dev_err(dev, "Failed to get PMIC hardware revision\n");
+ return -ENODEV;
+ }
+ if (hrv != CHT_WC_HRV) {
+ dev_err(dev, "Invalid PMIC hardware revision: %llu\n", hrv);
+ return -ENODEV;
+ }
+ if (client->irq < 0) {
+ dev_err(dev, "Invalid IRQ\n");
+ return -ENODEV;
+ }
+
+ pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
+ if (!pmic)
+ return -ENOMEM;
+
+ pmic->irq = client->irq;
+ pmic->dev = dev;
+ i2c_set_clientdata(client, pmic);
+
+ pmic->regmap = devm_regmap_init(dev, NULL, client, &cht_wc_regmap_cfg);
+ if (IS_ERR(pmic->regmap))
+ return PTR_ERR(pmic->regmap);
+
+ ret = devm_regmap_add_irq_chip(dev, pmic->regmap, pmic->irq,
+ IRQF_ONESHOT | IRQF_SHARED, 0,
+ &cht_wc_regmap_irq_chip,
+ &pmic->irq_chip_data);
+ if (ret)
+ return ret;
+
+ return devm_mfd_add_devices(dev, -1, cht_wc_dev, ARRAY_SIZE(cht_wc_dev),
+ NULL, 0, regmap_irq_get_domain(pmic->irq_chip_data));
+}
+
+static void cht_wc_shutdown(struct i2c_client *client)
+{
+ struct intel_soc_pmic *pmic = i2c_get_clientdata(client);
+
+ disable_irq(pmic->irq);
+}
+
+static int __maybe_unused cht_wc_suspend(struct device *dev)
+{
+ struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+ disable_irq(pmic->irq);
+ return 0;
+}
+
+static int __maybe_unused cht_wc_resume(struct device *dev)
+{
+ struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+ enable_irq(pmic->irq);
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cht_wc_pm_ops, cht_wc_suspend, cht_wc_resume);
+
+static const struct i2c_device_id cht_wc_i2c_id[] = {
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, cht_wc_i2c_id);
+
+static const struct acpi_device_id cht_wc_acpi_ids[] = {
+ { "INT34D3", },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, cht_wc_acpi_ids);
+
+static struct i2c_driver cht_wc_driver = {
+ .driver = {
+ .name = "CHT Whiskey Cove PMIC",
+ .pm = &cht_wc_pm_ops,
+ .acpi_match_table = ACPI_PTR(cht_wc_acpi_ids),
+ },
+ .probe = cht_wc_probe,
+ .shutdown = cht_wc_shutdown,
+ .id_table = cht_wc_i2c_id,
+};
+
+module_i2c_driver(cht_wc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
Add mfd driver for Intel CHT Whiskey Cove PMIC, based on various non upstreamed CHT Whiskey Cove PMIC patches. This is a somewhat minimal version which adds irqchip support and cells for: ACPI PMIC opregion support, the i2c-controller driving the external charger irc and the pwrsrc/extcon block. Further cells can be added in the future if/when drivers are upstreamed for them. Cc: Bin Gao <bin.gao@intel.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v2: -Since this uses plain mfd and not the intel_soc_pmic stuff give it its own Kconfig and allow this to be built as a module -Add missing #include <acpi/acpi_bus.h> Changes in v3: -Drop #include <acpi/acpi_bus.h> again, not the right fix for the build errors -Error out when the upper byte of the register-address passed to the regmap functions is 0 rather then hardcoding an address in that case -Various minor style tweaks / cleanups -Move defines of regulator register addresses to intel_pmic_chtwc.c, it is the only place where they are used -Drop now empty include/linux/mfd/intel_chtwc.h -Rename intel_soc_pmic_chtwc.c to intel_cht_wc.c to match Kconfig option name -Add irqchip support -Add external charger cell -Add pwrsrc cell --- drivers/mfd/Kconfig | 11 ++ drivers/mfd/Makefile | 1 + drivers/mfd/intel_soc_pmic_chtwc.c | 243 +++++++++++++++++++++++++++++++++++++ 3 files changed, 255 insertions(+) create mode 100644 drivers/mfd/intel_soc_pmic_chtwc.c