diff mbox

[v22,09/11] acpi/arm64: Add memory-mapped timer support in GTDT driver

Message ID 20170321163122.9183-10-fu.wei@linaro.org (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

fu.wei@linaro.org March 21, 2017, 4:31 p.m. UTC
From: Fu Wei <fu.wei@linaro.org>

On platforms booting with ACPI, architected memory-mapped timers'
configuration data is provided by firmware through the ACPI GTDT
static table.

The clocksource architected timer kernel driver requires a firmware
interface to collect timer configuration and configure its driver.
this infrastructure is present for device tree systems, but it is
missing on systems booting with ACPI.

Implement the kernel infrastructure required to parse the static
ACPI GTDT table so that the architected timer clocksource driver can
make use of it on systems booting with ACPI, therefore enabling
the corresponding timers configuration.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/acpi/arm64/gtdt.c | 130 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/acpi.h      |   1 +
 2 files changed, 131 insertions(+)

Comments

Lorenzo Pieralisi March 29, 2017, 4:47 p.m. UTC | #1
On Wed, Mar 22, 2017 at 12:31:20AM +0800, fu.wei@linaro.org wrote:
> From: Fu Wei <fu.wei@linaro.org>
> 
> On platforms booting with ACPI, architected memory-mapped timers'
> configuration data is provided by firmware through the ACPI GTDT
> static table.
> 
> The clocksource architected timer kernel driver requires a firmware
> interface to collect timer configuration and configure its driver.
> this infrastructure is present for device tree systems, but it is
> missing on systems booting with ACPI.
> 
> Implement the kernel infrastructure required to parse the static
> ACPI GTDT table so that the architected timer clocksource driver can
> make use of it on systems booting with ACPI, therefore enabling
> the corresponding timers configuration.
> 
> Signed-off-by: Fu Wei <fu.wei@linaro.org>
> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> ---
>  drivers/acpi/arm64/gtdt.c | 130 ++++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/acpi.h      |   1 +
>  2 files changed, 131 insertions(+)
> 
> diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c
> index 8a03b4b..f471873 100644
> --- a/drivers/acpi/arm64/gtdt.c
> +++ b/drivers/acpi/arm64/gtdt.c
> @@ -37,6 +37,28 @@ struct acpi_gtdt_descriptor {
>  
>  static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata;
>  
> +static inline void *next_platform_timer(void *platform_timer)
> +{
> +	struct acpi_gtdt_header *gh = platform_timer;
> +
> +	platform_timer += gh->length;
> +	if (platform_timer < acpi_gtdt_desc.gtdt_end)
> +		return platform_timer;
> +
> +	return NULL;
> +}
> +
> +#define for_each_platform_timer(_g)				\
> +	for (_g = acpi_gtdt_desc.platform_timer; _g;	\
> +	     _g = next_platform_timer(_g))
> +
> +static inline bool is_timer_block(void *platform_timer)
> +{
> +	struct acpi_gtdt_header *gh = platform_timer;
> +
> +	return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK;
> +}
> +
>  static int __init map_gt_gsi(u32 interrupt, u32 flags)
>  {
>  	int trigger, polarity;
> @@ -155,3 +177,111 @@ int __init acpi_gtdt_init(struct acpi_table_header *table,
>  
>  	return ret;
>  }
> +
> +static int __init gtdt_parse_timer_block(struct acpi_gtdt_timer_block *block,
> +					 struct arch_timer_mem *timer_mem)
> +{
> +	int i, j;
> +	struct acpi_gtdt_timer_entry *gtdt_frame;
> +
> +	if (!block->timer_count) {
> +		pr_err(FW_BUG "GT block present, but frame count is zero.");
> +		return -ENODEV;
> +	}
> +
> +	if (block->timer_count > ARCH_TIMER_MEM_MAX_FRAMES) {
> +		pr_err(FW_BUG "GT block lists %d frames, ACPI spec only allows 8\n",
> +		       block->timer_count);
> +		return -EINVAL;
> +	}
> +
> +	timer_mem->cntctlbase = (phys_addr_t)block->block_address;
> +	/*
> +	 * The CNTCTLBase frame is 4KB (register offsets 0x000 - 0xFFC).
> +	 * See ARM DDI 0487A.k_iss10775, page I1-5129, Table I1-3
> +	 * "CNTCTLBase memory map".
> +	 */
> +	timer_mem->size = SZ_4K;
> +
> +	gtdt_frame = (void *)block + block->timer_offset;
> +	if (gtdt_frame + block->timer_count != (void *)block + block->header.length)
> +		return -EINVAL;
> +
> +	/*
> +	 * Get the GT timer Frame data for every GT Block Timer
> +	 */
> +	for (i = 0, j = 0; i < block->timer_count; i++, gtdt_frame++) {
> +		struct arch_timer_mem_frame *frame = &timer_mem->frame[j];
> +
> +		if (gtdt_frame->common_flags & ACPI_GTDT_GT_IS_SECURE_TIMER)
> +			continue;
> +
> +		if (!gtdt_frame->base_address || !gtdt_frame->timer_interrupt)
> +			return -EINVAL;
> +
> +		frame->phys_irq = map_gt_gsi(gtdt_frame->timer_interrupt,
> +					     gtdt_frame->timer_flags);
> +		if (frame->phys_irq <= 0) {
> +			pr_warn("failed to map physical timer irq in frame %d.\n",
> +				i);
> +			return -EINVAL;
> +		}
> +
> +		frame->virt_irq =
> +			map_gt_gsi(gtdt_frame->virtual_timer_interrupt,
> +				   gtdt_frame->virtual_timer_flags);
> +		if (frame->virt_irq <= 0) {
> +			pr_warn("failed to map virtual timer irq in frame %d.\n",
> +				i);
> +			acpi_unregister_gsi(gtdt_frame->timer_interrupt);
> +			return -EINVAL;
> +		}
> +
> +		frame->frame_nr = gtdt_frame->frame_number;
> +		frame->cntbase = gtdt_frame->base_address;
> +		/*
> +		 * The CNTBaseN frame is 4KB (register offsets 0x000 - 0xFFC).
> +		 * See ARM DDI 0487A.k_iss10775, page I1-5130, Table I1-4
> +		 * "CNTBaseN memory map".
> +		 */
> +		frame->size = SZ_4K;
> +		j++;
> +	}
> +	timer_mem->num_frames = j;
> +
> +	return 0;
> +}
> +
> +/**
> + * acpi_arch_timer_mem_init() - Get the info of all GT blocks in GTDT table.
> + * @timer_mem:	the pointer to the array of struct arch_timer_mem for returning
> + *		the result of parsing. The element number of this array should
> + *		be platform_timer_count(the total number of platform timers).
> + * @count:	The pointer of int variate for returning the number of GT
> + *		blocks we have parsed.

Nit: this comment was wrong on all the patches I reviewed :) must be
some copy and paste.

> + *
> + * Return: 0 if success, -EINVAL/-ENODEV if error.
> + */
> +int __init acpi_arch_timer_mem_init(struct arch_timer_mem *timer_mem,
> +				    int *timer_count)
> +{
> +	int ret;
> +	void *platform_timer;
> +
> +	*timer_count = 0;
> +	for_each_platform_timer(platform_timer) {
> +		if (is_timer_block(platform_timer)) {
> +			ret = gtdt_parse_timer_block(platform_timer, timer_mem);
> +			if (ret)
> +				return ret;

Isn't there some unwinding to carry out here (eg GSI) ?

Otherwise it looks fine (minus Mark's request for using frame numbers
as indexes that you should change).

Lorenzo

> +			timer_mem++;
> +			(*timer_count)++;
> +		}
> +	}
> +
> +	if (*timer_count)
> +		pr_info("found %d memory-mapped timer block(s).\n",
> +			*timer_count);
> +
> +	return 0;
> +}
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 4b5c146..3193724 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -599,6 +599,7 @@ int acpi_reconfig_notifier_unregister(struct notifier_block *nb);
>  int acpi_gtdt_init(struct acpi_table_header *table, int *platform_timer_count);
>  int acpi_gtdt_map_ppi(int type);
>  bool acpi_gtdt_c3stop(int type);
> +int acpi_arch_timer_mem_init(struct arch_timer_mem *timer_mem, int *timer_count);
>  #endif
>  
>  #else	/* !CONFIG_ACPI */
> -- 
> 2.9.3
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
fu.wei@linaro.org March 30, 2017, 7:54 a.m. UTC | #2
Hi Lorenzo,

On 30 March 2017 at 00:47, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> wrote:
> On Wed, Mar 22, 2017 at 12:31:20AM +0800, fu.wei@linaro.org wrote:
>> From: Fu Wei <fu.wei@linaro.org>
>>
>> On platforms booting with ACPI, architected memory-mapped timers'
>> configuration data is provided by firmware through the ACPI GTDT
>> static table.
>>
>> The clocksource architected timer kernel driver requires a firmware
>> interface to collect timer configuration and configure its driver.
>> this infrastructure is present for device tree systems, but it is
>> missing on systems booting with ACPI.
>>
>> Implement the kernel infrastructure required to parse the static
>> ACPI GTDT table so that the architected timer clocksource driver can
>> make use of it on systems booting with ACPI, therefore enabling
>> the corresponding timers configuration.
>>
>> Signed-off-by: Fu Wei <fu.wei@linaro.org>
>> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
>> ---
>>  drivers/acpi/arm64/gtdt.c | 130 ++++++++++++++++++++++++++++++++++++++++++++++
>>  include/linux/acpi.h      |   1 +
>>  2 files changed, 131 insertions(+)
>>
>> diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c
>> index 8a03b4b..f471873 100644
>> --- a/drivers/acpi/arm64/gtdt.c
>> +++ b/drivers/acpi/arm64/gtdt.c
>> @@ -37,6 +37,28 @@ struct acpi_gtdt_descriptor {
>>
>>  static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata;
>>
>> +static inline void *next_platform_timer(void *platform_timer)
>> +{
>> +     struct acpi_gtdt_header *gh = platform_timer;
>> +
>> +     platform_timer += gh->length;
>> +     if (platform_timer < acpi_gtdt_desc.gtdt_end)
>> +             return platform_timer;
>> +
>> +     return NULL;
>> +}
>> +
>> +#define for_each_platform_timer(_g)                          \
>> +     for (_g = acpi_gtdt_desc.platform_timer; _g;    \
>> +          _g = next_platform_timer(_g))
>> +
>> +static inline bool is_timer_block(void *platform_timer)
>> +{
>> +     struct acpi_gtdt_header *gh = platform_timer;
>> +
>> +     return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK;
>> +}
>> +
>>  static int __init map_gt_gsi(u32 interrupt, u32 flags)
>>  {
>>       int trigger, polarity;
>> @@ -155,3 +177,111 @@ int __init acpi_gtdt_init(struct acpi_table_header *table,
>>
>>       return ret;
>>  }
>> +
>> +static int __init gtdt_parse_timer_block(struct acpi_gtdt_timer_block *block,
>> +                                      struct arch_timer_mem *timer_mem)
>> +{
>> +     int i, j;
>> +     struct acpi_gtdt_timer_entry *gtdt_frame;
>> +
>> +     if (!block->timer_count) {
>> +             pr_err(FW_BUG "GT block present, but frame count is zero.");
>> +             return -ENODEV;
>> +     }
>> +
>> +     if (block->timer_count > ARCH_TIMER_MEM_MAX_FRAMES) {
>> +             pr_err(FW_BUG "GT block lists %d frames, ACPI spec only allows 8\n",
>> +                    block->timer_count);
>> +             return -EINVAL;
>> +     }
>> +
>> +     timer_mem->cntctlbase = (phys_addr_t)block->block_address;
>> +     /*
>> +      * The CNTCTLBase frame is 4KB (register offsets 0x000 - 0xFFC).
>> +      * See ARM DDI 0487A.k_iss10775, page I1-5129, Table I1-3
>> +      * "CNTCTLBase memory map".
>> +      */
>> +     timer_mem->size = SZ_4K;
>> +
>> +     gtdt_frame = (void *)block + block->timer_offset;
>> +     if (gtdt_frame + block->timer_count != (void *)block + block->header.length)
>> +             return -EINVAL;
>> +
>> +     /*
>> +      * Get the GT timer Frame data for every GT Block Timer
>> +      */
>> +     for (i = 0, j = 0; i < block->timer_count; i++, gtdt_frame++) {
>> +             struct arch_timer_mem_frame *frame = &timer_mem->frame[j];
>> +
>> +             if (gtdt_frame->common_flags & ACPI_GTDT_GT_IS_SECURE_TIMER)
>> +                     continue;
>> +
>> +             if (!gtdt_frame->base_address || !gtdt_frame->timer_interrupt)
>> +                     return -EINVAL;
>> +
>> +             frame->phys_irq = map_gt_gsi(gtdt_frame->timer_interrupt,
>> +                                          gtdt_frame->timer_flags);
>> +             if (frame->phys_irq <= 0) {
>> +                     pr_warn("failed to map physical timer irq in frame %d.\n",
>> +                             i);
>> +                     return -EINVAL;
>> +             }
>> +
>> +             frame->virt_irq =
>> +                     map_gt_gsi(gtdt_frame->virtual_timer_interrupt,
>> +                                gtdt_frame->virtual_timer_flags);
>> +             if (frame->virt_irq <= 0) {
>> +                     pr_warn("failed to map virtual timer irq in frame %d.\n",
>> +                             i);
>> +                     acpi_unregister_gsi(gtdt_frame->timer_interrupt);
>> +                     return -EINVAL;
>> +             }
>> +
>> +             frame->frame_nr = gtdt_frame->frame_number;
>> +             frame->cntbase = gtdt_frame->base_address;
>> +             /*
>> +              * The CNTBaseN frame is 4KB (register offsets 0x000 - 0xFFC).
>> +              * See ARM DDI 0487A.k_iss10775, page I1-5130, Table I1-4
>> +              * "CNTBaseN memory map".
>> +              */
>> +             frame->size = SZ_4K;
>> +             j++;
>> +     }
>> +     timer_mem->num_frames = j;
>> +
>> +     return 0;
>> +}
>> +
>> +/**
>> + * acpi_arch_timer_mem_init() - Get the info of all GT blocks in GTDT table.
>> + * @timer_mem:       the pointer to the array of struct arch_timer_mem for returning
>> + *           the result of parsing. The element number of this array should
>> + *           be platform_timer_count(the total number of platform timers).
>> + * @count:   The pointer of int variate for returning the number of GT
>> + *           blocks we have parsed.
>
> Nit: this comment was wrong on all the patches I reviewed :) must be
> some copy and paste.

Thanks ,

 * @timer_count: It points to a integer variable which is used for storing the
 *                         number of GT blocks we have parsed.

Is that OK for you?
>
>> + *
>> + * Return: 0 if success, -EINVAL/-ENODEV if error.
>> + */
>> +int __init acpi_arch_timer_mem_init(struct arch_timer_mem *timer_mem,
>> +                                 int *timer_count)
>> +{
>> +     int ret;
>> +     void *platform_timer;
>> +
>> +     *timer_count = 0;
>> +     for_each_platform_timer(platform_timer) {
>> +             if (is_timer_block(platform_timer)) {
>> +                     ret = gtdt_parse_timer_block(platform_timer, timer_mem);
>> +                     if (ret)
>> +                             return ret;
>
> Isn't there some unwinding to carry out here (eg GSI) ?

Thanks for your reminding,
it should be in gtdt_parse_timer_block, will do

>
> Otherwise it looks fine (minus Mark's request for using frame numbers
> as indexes that you should change).
>
> Lorenzo
>
>> +                     timer_mem++;
>> +                     (*timer_count)++;
>> +             }
>> +     }
>> +
>> +     if (*timer_count)
>> +             pr_info("found %d memory-mapped timer block(s).\n",
>> +                     *timer_count);
>> +
>> +     return 0;
>> +}
>> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
>> index 4b5c146..3193724 100644
>> --- a/include/linux/acpi.h
>> +++ b/include/linux/acpi.h
>> @@ -599,6 +599,7 @@ int acpi_reconfig_notifier_unregister(struct notifier_block *nb);
>>  int acpi_gtdt_init(struct acpi_table_header *table, int *platform_timer_count);
>>  int acpi_gtdt_map_ppi(int type);
>>  bool acpi_gtdt_c3stop(int type);
>> +int acpi_arch_timer_mem_init(struct arch_timer_mem *timer_mem, int *timer_count);
>>  #endif
>>
>>  #else        /* !CONFIG_ACPI */
>> --
>> 2.9.3
>>
diff mbox

Patch

diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c
index 8a03b4b..f471873 100644
--- a/drivers/acpi/arm64/gtdt.c
+++ b/drivers/acpi/arm64/gtdt.c
@@ -37,6 +37,28 @@  struct acpi_gtdt_descriptor {
 
 static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata;
 
+static inline void *next_platform_timer(void *platform_timer)
+{
+	struct acpi_gtdt_header *gh = platform_timer;
+
+	platform_timer += gh->length;
+	if (platform_timer < acpi_gtdt_desc.gtdt_end)
+		return platform_timer;
+
+	return NULL;
+}
+
+#define for_each_platform_timer(_g)				\
+	for (_g = acpi_gtdt_desc.platform_timer; _g;	\
+	     _g = next_platform_timer(_g))
+
+static inline bool is_timer_block(void *platform_timer)
+{
+	struct acpi_gtdt_header *gh = platform_timer;
+
+	return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK;
+}
+
 static int __init map_gt_gsi(u32 interrupt, u32 flags)
 {
 	int trigger, polarity;
@@ -155,3 +177,111 @@  int __init acpi_gtdt_init(struct acpi_table_header *table,
 
 	return ret;
 }
+
+static int __init gtdt_parse_timer_block(struct acpi_gtdt_timer_block *block,
+					 struct arch_timer_mem *timer_mem)
+{
+	int i, j;
+	struct acpi_gtdt_timer_entry *gtdt_frame;
+
+	if (!block->timer_count) {
+		pr_err(FW_BUG "GT block present, but frame count is zero.");
+		return -ENODEV;
+	}
+
+	if (block->timer_count > ARCH_TIMER_MEM_MAX_FRAMES) {
+		pr_err(FW_BUG "GT block lists %d frames, ACPI spec only allows 8\n",
+		       block->timer_count);
+		return -EINVAL;
+	}
+
+	timer_mem->cntctlbase = (phys_addr_t)block->block_address;
+	/*
+	 * The CNTCTLBase frame is 4KB (register offsets 0x000 - 0xFFC).
+	 * See ARM DDI 0487A.k_iss10775, page I1-5129, Table I1-3
+	 * "CNTCTLBase memory map".
+	 */
+	timer_mem->size = SZ_4K;
+
+	gtdt_frame = (void *)block + block->timer_offset;
+	if (gtdt_frame + block->timer_count != (void *)block + block->header.length)
+		return -EINVAL;
+
+	/*
+	 * Get the GT timer Frame data for every GT Block Timer
+	 */
+	for (i = 0, j = 0; i < block->timer_count; i++, gtdt_frame++) {
+		struct arch_timer_mem_frame *frame = &timer_mem->frame[j];
+
+		if (gtdt_frame->common_flags & ACPI_GTDT_GT_IS_SECURE_TIMER)
+			continue;
+
+		if (!gtdt_frame->base_address || !gtdt_frame->timer_interrupt)
+			return -EINVAL;
+
+		frame->phys_irq = map_gt_gsi(gtdt_frame->timer_interrupt,
+					     gtdt_frame->timer_flags);
+		if (frame->phys_irq <= 0) {
+			pr_warn("failed to map physical timer irq in frame %d.\n",
+				i);
+			return -EINVAL;
+		}
+
+		frame->virt_irq =
+			map_gt_gsi(gtdt_frame->virtual_timer_interrupt,
+				   gtdt_frame->virtual_timer_flags);
+		if (frame->virt_irq <= 0) {
+			pr_warn("failed to map virtual timer irq in frame %d.\n",
+				i);
+			acpi_unregister_gsi(gtdt_frame->timer_interrupt);
+			return -EINVAL;
+		}
+
+		frame->frame_nr = gtdt_frame->frame_number;
+		frame->cntbase = gtdt_frame->base_address;
+		/*
+		 * The CNTBaseN frame is 4KB (register offsets 0x000 - 0xFFC).
+		 * See ARM DDI 0487A.k_iss10775, page I1-5130, Table I1-4
+		 * "CNTBaseN memory map".
+		 */
+		frame->size = SZ_4K;
+		j++;
+	}
+	timer_mem->num_frames = j;
+
+	return 0;
+}
+
+/**
+ * acpi_arch_timer_mem_init() - Get the info of all GT blocks in GTDT table.
+ * @timer_mem:	the pointer to the array of struct arch_timer_mem for returning
+ *		the result of parsing. The element number of this array should
+ *		be platform_timer_count(the total number of platform timers).
+ * @count:	The pointer of int variate for returning the number of GT
+ *		blocks we have parsed.
+ *
+ * Return: 0 if success, -EINVAL/-ENODEV if error.
+ */
+int __init acpi_arch_timer_mem_init(struct arch_timer_mem *timer_mem,
+				    int *timer_count)
+{
+	int ret;
+	void *platform_timer;
+
+	*timer_count = 0;
+	for_each_platform_timer(platform_timer) {
+		if (is_timer_block(platform_timer)) {
+			ret = gtdt_parse_timer_block(platform_timer, timer_mem);
+			if (ret)
+				return ret;
+			timer_mem++;
+			(*timer_count)++;
+		}
+	}
+
+	if (*timer_count)
+		pr_info("found %d memory-mapped timer block(s).\n",
+			*timer_count);
+
+	return 0;
+}
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 4b5c146..3193724 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -599,6 +599,7 @@  int acpi_reconfig_notifier_unregister(struct notifier_block *nb);
 int acpi_gtdt_init(struct acpi_table_header *table, int *platform_timer_count);
 int acpi_gtdt_map_ppi(int type);
 bool acpi_gtdt_c3stop(int type);
+int acpi_arch_timer_mem_init(struct arch_timer_mem *timer_mem, int *timer_count);
 #endif
 
 #else	/* !CONFIG_ACPI */