@@ -38,6 +38,7 @@
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/mmc/slot-gpio.h>
+#include <linux/pm_runtime.h>
#include "dw_mmc.h"
@@ -1657,8 +1658,15 @@ static void __dw_mci_enable_sdio_irq(struct dw_mci_slot *slot, int enb)
static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
{
struct dw_mci_slot *slot = mmc_priv(mmc);
+ struct dw_mci *host = slot->host;
__dw_mci_enable_sdio_irq(slot, enb);
+
+ /* Avoid runtime suspending the device when SDIO IRQ is enabled */
+ if (enb)
+ pm_runtime_get_noresume(host->dev);
+ else
+ pm_runtime_put_noidle(host->dev);
}
static void dw_mci_ack_sdio_irq(struct mmc_host *mmc)
To be able to handle SDIO IRQs the dw_mmc device needs to be powered and providing clock to the SDIO card. Therefore, we must not allow the device to be runtime PM suspended while SDIO IRQs are enabled. To fix this, let's increase the runtime PM usage count while the mmc core enables SDIO IRQs. Later when the mmc core tells dw_mmc to disable SDIO IRQs, we drop the usage count to again allow runtime PM suspend. This now becomes the default behaviour for dw_mmc. In cases where SDIO IRQs can be re-routed as GPIO wake-ups during runtime PM suspend, one could potentially allow runtime PM suspend. However, that will have to be addressed as a separate change on top of this one. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> --- drivers/mmc/host/dw_mmc.c | 8 ++++++++ 1 file changed, 8 insertions(+)