diff mbox

[1/4] PCI: add resizeable BAR infrastructure v4

Message ID 1493126394-1239-2-git-send-email-deathsimple@vodafone.de (mailing list archive)
State New, archived
Headers show

Commit Message

Christian König April 25, 2017, 1:19 p.m. UTC
From: Christian König <christian.koenig@amd.com>

Just the defines and helper functions to read the possible sizes of a BAR and
update it's size.

See https://pcisig.com/sites/default/files/specification_documents/ECN_Resizable-BAR_24Apr2008.pdf
and PCIe r3.1, sec 7.22.

This is useful for hardware with large local storage (mostly GFX) which only
expose 256MB BARs initially to be compatible with 32bit systems.

v2: provide read helper as well
v3: improve function names, use unsigned values, add better comments.
v4: move definition, improve commit message, s/bar/BAR/

Signed-off-by: Christian König <christian.koenig@amd.com>
---
 drivers/pci/pci.c             | 115 ++++++++++++++++++++++++++++++++++++++++++
 drivers/pci/pci.h             |   4 ++
 include/uapi/linux/pci_regs.h |  11 +++-
 3 files changed, 128 insertions(+), 2 deletions(-)

Comments

Alex Deucher April 25, 2017, 3 p.m. UTC | #1
On Tue, Apr 25, 2017 at 9:19 AM, Christian König
<deathsimple@vodafone.de> wrote:
> From: Christian König <christian.koenig@amd.com>
>
> Just the defines and helper functions to read the possible sizes of a BAR and
> update it's size.
>
> See https://pcisig.com/sites/default/files/specification_documents/ECN_Resizable-BAR_24Apr2008.pdf
> and PCIe r3.1, sec 7.22.
>
> This is useful for hardware with large local storage (mostly GFX) which only
> expose 256MB BARs initially to be compatible with 32bit systems.
>
> v2: provide read helper as well
> v3: improve function names, use unsigned values, add better comments.
> v4: move definition, improve commit message, s/bar/BAR/
>
> Signed-off-by: Christian König <christian.koenig@amd.com>


Patches 1, 2:
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

> ---
>  drivers/pci/pci.c             | 115 ++++++++++++++++++++++++++++++++++++++++++
>  drivers/pci/pci.h             |   4 ++
>  include/uapi/linux/pci_regs.h |  11 +++-
>  3 files changed, 128 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index ba34907..c2d9f78 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -2944,6 +2944,121 @@ bool pci_acs_path_enabled(struct pci_dev *start,
>  }
>
>  /**
> + * pci_rbar_get_possible_sizes - get possible sizes for BAR
> + * @dev: PCI device
> + * @bar: BAR to query
> + *
> + * Get the possible sizes of a resizeable BAR as bitmask defined in the spec
> + * (bit 0=1MB, bit 19=512GB). Returns 0 if BAR isn't resizeable.
> + */
> +u32 pci_rbar_get_possible_sizes(struct pci_dev *pdev, int bar)
> +{
> +       unsigned pos, nbars;
> +       u32 ctrl, cap;
> +       unsigned i;
> +
> +       pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_REBAR);
> +       if (!pos)
> +               return 0;
> +
> +       pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
> +       nbars = (ctrl & PCI_REBAR_CTRL_NBAR_MASK) >> PCI_REBAR_CTRL_NBAR_SHIFT;
> +
> +       for (i = 0; i < nbars; ++i, pos += 8) {
> +               int bar_idx;
> +
> +               pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
> +               bar_idx = (ctrl & PCI_REBAR_CTRL_BAR_IDX_MASK) >>
> +                               PCI_REBAR_CTRL_BAR_IDX_SHIFT;
> +               if (bar_idx != bar)
> +                       continue;
> +
> +               pci_read_config_dword(pdev, pos + PCI_REBAR_CAP, &cap);
> +               return (cap & PCI_REBAR_CTRL_SIZES_MASK) >>
> +                       PCI_REBAR_CTRL_SIZES_SHIFT;
> +       }
> +
> +       return 0;
> +}
> +
> +/**
> + * pci_rbar_get_current_size - get the current size of a BAR
> + * @dev: PCI device
> + * @bar: BAR to set size to
> + *
> + * Read the size of a BAR from the resizeable BAR config.
> + * Returns size if found or negativ error code.
> + */
> +int pci_rbar_get_current_size(struct pci_dev *pdev, int bar)
> +{
> +       unsigned pos, nbars;
> +       u32 ctrl;
> +       unsigned i;
> +
> +       pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_REBAR);
> +       if (!pos)
> +               return -ENOTSUPP;
> +
> +       pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
> +       nbars = (ctrl & PCI_REBAR_CTRL_NBAR_MASK) >> PCI_REBAR_CTRL_NBAR_SHIFT;
> +
> +       for (i = 0; i < nbars; ++i, pos += 8) {
> +               int bar_idx;
> +
> +               pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
> +               bar_idx = (ctrl & PCI_REBAR_CTRL_BAR_IDX_MASK) >>
> +                               PCI_REBAR_CTRL_BAR_IDX_SHIFT;
> +               if (bar_idx != bar)
> +                       continue;
> +
> +               return (ctrl & PCI_REBAR_CTRL_BAR_SIZE_MASK) >>
> +                       PCI_REBAR_CTRL_BAR_SIZE_SHIFT;
> +       }
> +
> +       return -ENOENT;
> +}
> +
> +/**
> + * pci_rbar_set_size - set a new size for a BAR
> + * @dev: PCI device
> + * @bar: BAR to set size to
> + * @size: new size as defined in the spec (log2(size in bytes) - 20)
> + *
> + * Set the new size of a BAR as defined in the spec (0=1MB, 19=512GB).
> + * Returns true if resizing was successful, false otherwise.
> + */
> +int pci_rbar_set_size(struct pci_dev *pdev, int bar, int size)
> +{
> +       unsigned pos, nbars;
> +       u32 ctrl;
> +       unsigned i;
> +
> +       pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_REBAR);
> +       if (!pos)
> +               return -ENOTSUPP;
> +
> +       pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
> +       nbars = (ctrl & PCI_REBAR_CTRL_NBAR_MASK) >> PCI_REBAR_CTRL_NBAR_SHIFT;
> +
> +       for (i = 0; i < nbars; ++i, pos += 8) {
> +               int bar_idx;
> +
> +               pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
> +               bar_idx = (ctrl & PCI_REBAR_CTRL_BAR_IDX_MASK) >>
> +                               PCI_REBAR_CTRL_BAR_IDX_SHIFT;
> +               if (bar_idx != bar)
> +                       continue;
> +
> +               ctrl &= ~PCI_REBAR_CTRL_BAR_SIZE_MASK;
> +               ctrl |= size << PCI_REBAR_CTRL_BAR_SIZE_SHIFT;
> +               pci_write_config_dword(pdev, pos + PCI_REBAR_CTRL, ctrl);
> +               return 0;
> +       }
> +
> +       return -ENOENT;
> +}
> +
> +/**
>   * pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
>   * @dev: the PCI device
>   * @pin: the INTx pin (1=INTA, 2=INTB, 3=INTC, 4=INTD)
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 4518562..1d27c22 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -356,4 +356,8 @@ static inline int pci_dev_specific_reset(struct pci_dev *dev, int probe)
>  }
>  #endif
>
> +u32 pci_rbar_get_possible_sizes(struct pci_dev *pdev, int bar);
> +int pci_rbar_get_current_size(struct pci_dev *pdev, int bar);
> +int pci_rbar_set_size(struct pci_dev *pdev, int bar, int size);
> +
>  #endif /* DRIVERS_PCI_H */
> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index e5a2e68..a75429e 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -932,9 +932,16 @@
>  #define PCI_SATA_SIZEOF_LONG   16
>
>  /* Resizable BARs */
> +#define PCI_REBAR_CAP          4       /* capability register */
> +#define  PCI_REBAR_CTRL_SIZES_MASK     (0xFFFFF << 4)  /* mask for sizes */
> +#define  PCI_REBAR_CTRL_SIZES_SHIFT    4       /* shift for sizes */
>  #define PCI_REBAR_CTRL         8       /* control register */
> -#define  PCI_REBAR_CTRL_NBAR_MASK      (7 << 5)        /* mask for # bars */
> -#define  PCI_REBAR_CTRL_NBAR_SHIFT     5       /* shift for # bars */
> +#define  PCI_REBAR_CTRL_BAR_IDX_MASK   (7 << 0)        /* mask for BAR index */
> +#define  PCI_REBAR_CTRL_BAR_IDX_SHIFT  0       /* shift for BAR index */
> +#define  PCI_REBAR_CTRL_NBAR_MASK      (7 << 5)        /* mask for # BARs */
> +#define  PCI_REBAR_CTRL_NBAR_SHIFT     5       /* shift for # BARs */
> +#define  PCI_REBAR_CTRL_BAR_SIZE_MASK  (0x1F << 8)     /* mask for BAR size */
> +#define  PCI_REBAR_CTRL_BAR_SIZE_SHIFT 8       /* shift for BAR size */
>
>  /* Dynamic Power Allocation */
>  #define PCI_DPA_CAP            4       /* capability register */
> --
> 2.7.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Andy Shevchenko April 26, 2017, 4:45 p.m. UTC | #2
On Tue, Apr 25, 2017 at 4:19 PM, Christian König
<deathsimple@vodafone.de> wrote:
> From: Christian König <christian.koenig@amd.com>
>
> Just the defines and helper functions to read the possible sizes of a BAR and
> update it's size.
>
> See https://pcisig.com/sites/default/files/specification_documents/ECN_Resizable-BAR_24Apr2008.pdf
> and PCIe r3.1, sec 7.22.
>
> This is useful for hardware with large local storage (mostly GFX) which only
> expose 256MB BARs initially to be compatible with 32bit systems.

> +u32 pci_rbar_get_possible_sizes(struct pci_dev *pdev, int bar)
> +{

> +       unsigned pos, nbars;
> +       u32 ctrl, cap;
> +       unsigned i;

Are we supposed to use plain 'unsigned' nowadays? I would go with
'unsigned int'.

> +}

> + * Returns size if found or negativ error code.

Typo: negative.

> +int pci_rbar_get_current_size(struct pci_dev *pdev, int bar)
> +{
> +       unsigned pos, nbars;

> +       u32 ctrl;
> +       unsigned i;

Reversed tree order?

> +       for (i = 0; i < nbars; ++i, pos += 8) {
> +               int bar_idx;
> +
> +               pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
> +               bar_idx = (ctrl & PCI_REBAR_CTRL_BAR_IDX_MASK) >>
> +                               PCI_REBAR_CTRL_BAR_IDX_SHIFT;
> +               if (bar_idx != bar)
> +                       continue;
> +
> +               return (ctrl & PCI_REBAR_CTRL_BAR_SIZE_MASK) >>
> +                       PCI_REBAR_CTRL_BAR_SIZE_SHIFT;
> +       }

This one the same as previous function, the difference only in what is
returned. CAre to split static helper function for both?

> +       return -ENOENT;
> +}

> +/**
> + * pci_rbar_set_size - set a new size for a BAR
> + * @dev: PCI device
> + * @bar: BAR to set size to

> + * @size: new size as defined in the spec (log2(size in bytes) - 20)

Not clear is it rounded up / down. I would go with "...in the spec
(0=1MB, 19=512GB)".

> + *
> + * Set the new size of a BAR as defined in the spec (0=1MB, 19=512GB).
> + * Returns true if resizing was successful, false otherwise.
> + */

> +int pci_rbar_set_size(struct pci_dev *pdev, int bar, int size)
> +{
> +       unsigned pos, nbars;
> +       u32 ctrl;
> +       unsigned i;


> +
> +       pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_REBAR);
> +       if (!pos)
> +               return -ENOTSUPP;
> +
> +       pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
> +       nbars = (ctrl & PCI_REBAR_CTRL_NBAR_MASK) >> PCI_REBAR_CTRL_NBAR_SHIFT;
> +
> +       for (i = 0; i < nbars; ++i, pos += 8) {
> +               int bar_idx;
> +
> +               pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
> +               bar_idx = (ctrl & PCI_REBAR_CTRL_BAR_IDX_MASK) >>
> +                               PCI_REBAR_CTRL_BAR_IDX_SHIFT;
> +               if (bar_idx != bar)
> +                       continue;

Above is duplicating previous.

So,
static int ..._find_rbar(..., u32 *ctrl)
{
}

Returns: (i.e.) 0 - found, 1 - not found, -ERRNO.

ret = _find_rbar();
if (ret < 0)
 return ret;
if (ret)
 return -ENOENT;
...
return 0;

So, please refactor.

> +
> +               ctrl &= ~PCI_REBAR_CTRL_BAR_SIZE_MASK;
> +               ctrl |= size << PCI_REBAR_CTRL_BAR_SIZE_SHIFT;
> +               pci_write_config_dword(pdev, pos + PCI_REBAR_CTRL, ctrl);
> +               return 0;
> +       }
> +
> +       return -ENOENT;
> +}

> -#define  PCI_REBAR_CTRL_NBAR_MASK      (7 << 5)        /* mask for # bars */
> -#define  PCI_REBAR_CTRL_NBAR_SHIFT     5       /* shift for # bars */

> +#define  PCI_REBAR_CTRL_NBAR_MASK      (7 << 5)        /* mask for # BARs */
> +#define  PCI_REBAR_CTRL_NBAR_SHIFT     5       /* shift for # BARs */

I understand why, but I dunno it worth to do.
Christian König May 2, 2017, 2:56 p.m. UTC | #3
Am 26.04.2017 um 18:45 schrieb Andy Shevchenko:
> [SNIP]
>> -#define  PCI_REBAR_CTRL_NBAR_MASK      (7 << 5)        /* mask for # bars */
>> -#define  PCI_REBAR_CTRL_NBAR_SHIFT     5       /* shift for # bars */
>> +#define  PCI_REBAR_CTRL_NBAR_MASK      (7 << 5)        /* mask for # BARs */
>> +#define  PCI_REBAR_CTRL_NBAR_SHIFT     5       /* shift for # BARs */
> I understand why, but I dunno it worth to do.
Bjorn suggested that. Either way is fine with me, but he needs to stick 
his signed-of-by on it when pushing it upstream. So his opinion usually 
wins.

All other comments will be integrated in the next version of the patch.

Thanks for the review,
Christian.
diff mbox

Patch

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index ba34907..c2d9f78 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2944,6 +2944,121 @@  bool pci_acs_path_enabled(struct pci_dev *start,
 }
 
 /**
+ * pci_rbar_get_possible_sizes - get possible sizes for BAR
+ * @dev: PCI device
+ * @bar: BAR to query
+ *
+ * Get the possible sizes of a resizeable BAR as bitmask defined in the spec
+ * (bit 0=1MB, bit 19=512GB). Returns 0 if BAR isn't resizeable.
+ */
+u32 pci_rbar_get_possible_sizes(struct pci_dev *pdev, int bar)
+{
+	unsigned pos, nbars;
+	u32 ctrl, cap;
+	unsigned i;
+
+	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_REBAR);
+	if (!pos)
+		return 0;
+
+	pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
+	nbars = (ctrl & PCI_REBAR_CTRL_NBAR_MASK) >> PCI_REBAR_CTRL_NBAR_SHIFT;
+
+	for (i = 0; i < nbars; ++i, pos += 8) {
+		int bar_idx;
+
+		pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
+		bar_idx = (ctrl & PCI_REBAR_CTRL_BAR_IDX_MASK) >>
+				PCI_REBAR_CTRL_BAR_IDX_SHIFT;
+		if (bar_idx != bar)
+			continue;
+
+		pci_read_config_dword(pdev, pos + PCI_REBAR_CAP, &cap);
+		return (cap & PCI_REBAR_CTRL_SIZES_MASK) >>
+			PCI_REBAR_CTRL_SIZES_SHIFT;
+	}
+
+	return 0;
+}
+
+/**
+ * pci_rbar_get_current_size - get the current size of a BAR
+ * @dev: PCI device
+ * @bar: BAR to set size to
+ *
+ * Read the size of a BAR from the resizeable BAR config.
+ * Returns size if found or negativ error code.
+ */
+int pci_rbar_get_current_size(struct pci_dev *pdev, int bar)
+{
+	unsigned pos, nbars;
+	u32 ctrl;
+	unsigned i;
+
+	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_REBAR);
+	if (!pos)
+		return -ENOTSUPP;
+
+	pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
+	nbars = (ctrl & PCI_REBAR_CTRL_NBAR_MASK) >> PCI_REBAR_CTRL_NBAR_SHIFT;
+
+	for (i = 0; i < nbars; ++i, pos += 8) {
+		int bar_idx;
+
+		pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
+		bar_idx = (ctrl & PCI_REBAR_CTRL_BAR_IDX_MASK) >>
+				PCI_REBAR_CTRL_BAR_IDX_SHIFT;
+		if (bar_idx != bar)
+			continue;
+
+		return (ctrl & PCI_REBAR_CTRL_BAR_SIZE_MASK) >>
+			PCI_REBAR_CTRL_BAR_SIZE_SHIFT;
+	}
+
+	return -ENOENT;
+}
+
+/**
+ * pci_rbar_set_size - set a new size for a BAR
+ * @dev: PCI device
+ * @bar: BAR to set size to
+ * @size: new size as defined in the spec (log2(size in bytes) - 20)
+ *
+ * Set the new size of a BAR as defined in the spec (0=1MB, 19=512GB).
+ * Returns true if resizing was successful, false otherwise.
+ */
+int pci_rbar_set_size(struct pci_dev *pdev, int bar, int size)
+{
+	unsigned pos, nbars;
+	u32 ctrl;
+	unsigned i;
+
+	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_REBAR);
+	if (!pos)
+		return -ENOTSUPP;
+
+	pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
+	nbars = (ctrl & PCI_REBAR_CTRL_NBAR_MASK) >> PCI_REBAR_CTRL_NBAR_SHIFT;
+
+	for (i = 0; i < nbars; ++i, pos += 8) {
+		int bar_idx;
+
+		pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
+		bar_idx = (ctrl & PCI_REBAR_CTRL_BAR_IDX_MASK) >>
+				PCI_REBAR_CTRL_BAR_IDX_SHIFT;
+		if (bar_idx != bar)
+			continue;
+
+		ctrl &= ~PCI_REBAR_CTRL_BAR_SIZE_MASK;
+		ctrl |= size << PCI_REBAR_CTRL_BAR_SIZE_SHIFT;
+		pci_write_config_dword(pdev, pos + PCI_REBAR_CTRL, ctrl);
+		return 0;
+	}
+
+	return -ENOENT;
+}
+
+/**
  * pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
  * @dev: the PCI device
  * @pin: the INTx pin (1=INTA, 2=INTB, 3=INTC, 4=INTD)
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 4518562..1d27c22 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -356,4 +356,8 @@  static inline int pci_dev_specific_reset(struct pci_dev *dev, int probe)
 }
 #endif
 
+u32 pci_rbar_get_possible_sizes(struct pci_dev *pdev, int bar);
+int pci_rbar_get_current_size(struct pci_dev *pdev, int bar);
+int pci_rbar_set_size(struct pci_dev *pdev, int bar, int size);
+
 #endif /* DRIVERS_PCI_H */
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index e5a2e68..a75429e 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -932,9 +932,16 @@ 
 #define PCI_SATA_SIZEOF_LONG	16
 
 /* Resizable BARs */
+#define PCI_REBAR_CAP		4	/* capability register */
+#define  PCI_REBAR_CTRL_SIZES_MASK	(0xFFFFF << 4)	/* mask for sizes */
+#define  PCI_REBAR_CTRL_SIZES_SHIFT	4	/* shift for sizes */
 #define PCI_REBAR_CTRL		8	/* control register */
-#define  PCI_REBAR_CTRL_NBAR_MASK	(7 << 5)	/* mask for # bars */
-#define  PCI_REBAR_CTRL_NBAR_SHIFT	5	/* shift for # bars */
+#define  PCI_REBAR_CTRL_BAR_IDX_MASK	(7 << 0)	/* mask for BAR index */
+#define  PCI_REBAR_CTRL_BAR_IDX_SHIFT	0	/* shift for BAR index */
+#define  PCI_REBAR_CTRL_NBAR_MASK	(7 << 5)	/* mask for # BARs */
+#define  PCI_REBAR_CTRL_NBAR_SHIFT	5	/* shift for # BARs */
+#define  PCI_REBAR_CTRL_BAR_SIZE_MASK	(0x1F << 8)	/* mask for BAR size */
+#define  PCI_REBAR_CTRL_BAR_SIZE_SHIFT	8	/* shift for BAR size */
 
 /* Dynamic Power Allocation */
 #define PCI_DPA_CAP		4	/* capability register */