[v2,15/21] xen-blkfront: Make use of the new sg_map helper function
diff mbox

Message ID 1493144468-22493-16-git-send-email-logang@deltatee.com
State New, archived
Headers show

Commit Message

Logan Gunthorpe April 25, 2017, 6:21 p.m. UTC
Straightforward conversion to the new helper, except due to the lack
of error path, we have to use SG_MAP_MUST_NOT_FAIL which may BUG_ON in
certain cases in the future.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
---
 drivers/block/xen-blkfront.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

Comments

Roger Pau Monné April 26, 2017, 7:37 a.m. UTC | #1
On Tue, Apr 25, 2017 at 12:21:02PM -0600, Logan Gunthorpe wrote:
> Straightforward conversion to the new helper, except due to the lack
> of error path, we have to use SG_MAP_MUST_NOT_FAIL which may BUG_ON in
> certain cases in the future.
> 
> Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
> Cc: Juergen Gross <jgross@suse.com>
> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> Cc: "Roger Pau Monné" <roger.pau@citrix.com>
> ---
>  drivers/block/xen-blkfront.c | 20 +++++++++++---------
>  1 file changed, 11 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
> index 3945963..ed62175 100644
> --- a/drivers/block/xen-blkfront.c
> +++ b/drivers/block/xen-blkfront.c
> @@ -816,8 +816,9 @@ static int blkif_queue_rw_req(struct request *req, struct blkfront_ring_info *ri
>  		BUG_ON(sg->offset + sg->length > PAGE_SIZE);
>  
>  		if (setup.need_copy) {
> -			setup.bvec_off = sg->offset;
> -			setup.bvec_data = kmap_atomic(sg_page(sg));
> +			setup.bvec_off = 0;
> +			setup.bvec_data = sg_map(sg, 0, SG_KMAP_ATOMIC |
> +						 SG_MAP_MUST_NOT_FAIL);

I assume that sg_map already adds sg->offset to the address?

Also wondering whether we can get rid of bvec_off and just increment bvec_data,
adding Julien who IIRC added this code.

>  		}
>  
>  		gnttab_foreach_grant_in_range(sg_page(sg),
> @@ -827,7 +828,7 @@ static int blkif_queue_rw_req(struct request *req, struct blkfront_ring_info *ri
>  					      &setup);
>  
>  		if (setup.need_copy)
> -			kunmap_atomic(setup.bvec_data);
> +			sg_unmap(sg, setup.bvec_data, 0, SG_KMAP_ATOMIC);
>  	}
>  	if (setup.segments)
>  		kunmap_atomic(setup.segments);
> @@ -1053,7 +1054,7 @@ static int xen_translate_vdev(int vdevice, int *minor, unsigned int *offset)
>  		case XEN_SCSI_DISK5_MAJOR:
>  		case XEN_SCSI_DISK6_MAJOR:
>  		case XEN_SCSI_DISK7_MAJOR:
> -			*offset = (*minor / PARTS_PER_DISK) + 
> +			*offset = (*minor / PARTS_PER_DISK) +
>  				((major - XEN_SCSI_DISK1_MAJOR + 1) * 16) +
>  				EMULATED_SD_DISK_NAME_OFFSET;
>  			*minor = *minor +
> @@ -1068,7 +1069,7 @@ static int xen_translate_vdev(int vdevice, int *minor, unsigned int *offset)
>  		case XEN_SCSI_DISK13_MAJOR:
>  		case XEN_SCSI_DISK14_MAJOR:
>  		case XEN_SCSI_DISK15_MAJOR:
> -			*offset = (*minor / PARTS_PER_DISK) + 
> +			*offset = (*minor / PARTS_PER_DISK) +
>  				((major - XEN_SCSI_DISK8_MAJOR + 8) * 16) +
>  				EMULATED_SD_DISK_NAME_OFFSET;
>  			*minor = *minor +
> @@ -1119,7 +1120,7 @@ static int xlvbd_alloc_gendisk(blkif_sector_t capacity,
>  	if (!VDEV_IS_EXTENDED(info->vdevice)) {
>  		err = xen_translate_vdev(info->vdevice, &minor, &offset);
>  		if (err)
> -			return err;		
> +			return err;

Cosmetic changes should go in a separate patch please.

Roger.

--
To unsubscribe from this list: send the line "unsubscribe target-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Logan Gunthorpe April 27, 2017, 8:19 p.m. UTC | #2
On 26/04/17 01:37 AM, Roger Pau Monné wrote:
> On Tue, Apr 25, 2017 at 12:21:02PM -0600, Logan Gunthorpe wrote:
>> Straightforward conversion to the new helper, except due to the lack
>> of error path, we have to use SG_MAP_MUST_NOT_FAIL which may BUG_ON in
>> certain cases in the future.
>>
>> Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
>> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
>> Cc: Juergen Gross <jgross@suse.com>
>> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
>> Cc: "Roger Pau Monné" <roger.pau@citrix.com>
>> ---
>>  drivers/block/xen-blkfront.c | 20 +++++++++++---------
>>  1 file changed, 11 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
>> index 3945963..ed62175 100644
>> --- a/drivers/block/xen-blkfront.c
>> +++ b/drivers/block/xen-blkfront.c
>> @@ -816,8 +816,9 @@ static int blkif_queue_rw_req(struct request *req, struct blkfront_ring_info *ri
>>  		BUG_ON(sg->offset + sg->length > PAGE_SIZE);
>>  
>>  		if (setup.need_copy) {
>> -			setup.bvec_off = sg->offset;
>> -			setup.bvec_data = kmap_atomic(sg_page(sg));
>> +			setup.bvec_off = 0;
>> +			setup.bvec_data = sg_map(sg, 0, SG_KMAP_ATOMIC |
>> +						 SG_MAP_MUST_NOT_FAIL);
> 
> I assume that sg_map already adds sg->offset to the address?

Correct.

> Also wondering whether we can get rid of bvec_off and just increment bvec_data,
> adding Julien who IIRC added this code.

bvec_off is used to keep track of the offset within the current mapping
so it's not a great idea given that you'd want to kunmap_atomic the
original address and not something with an offset. It would be nice if
this could be converted to use the sg_miter interface but that's a much
more invasive change that would require someone who knows this code and
can properly test it. I'd be very grateful if someone actually took that on.

Logan

--
To unsubscribe from this list: send the line "unsubscribe target-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jason Gunthorpe April 27, 2017, 8:53 p.m. UTC | #3
On Thu, Apr 27, 2017 at 02:19:24PM -0600, Logan Gunthorpe wrote:
> 
> 
> On 26/04/17 01:37 AM, Roger Pau Monné wrote:
> > On Tue, Apr 25, 2017 at 12:21:02PM -0600, Logan Gunthorpe wrote:
> >> Straightforward conversion to the new helper, except due to the lack
> >> of error path, we have to use SG_MAP_MUST_NOT_FAIL which may BUG_ON in
> >> certain cases in the future.
> >>
> >> Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
> >> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
> >> Cc: Juergen Gross <jgross@suse.com>
> >> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> >> Cc: "Roger Pau Monné" <roger.pau@citrix.com>
> >>  drivers/block/xen-blkfront.c | 20 +++++++++++---------
> >>  1 file changed, 11 insertions(+), 9 deletions(-)
> >>
> >> diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
> >> index 3945963..ed62175 100644
> >> +++ b/drivers/block/xen-blkfront.c
> >> @@ -816,8 +816,9 @@ static int blkif_queue_rw_req(struct request *req, struct blkfront_ring_info *ri
> >>  		BUG_ON(sg->offset + sg->length > PAGE_SIZE);
> >>  
> >>  		if (setup.need_copy) {
> >> -			setup.bvec_off = sg->offset;
> >> -			setup.bvec_data = kmap_atomic(sg_page(sg));
> >> +			setup.bvec_off = 0;
> >> +			setup.bvec_data = sg_map(sg, 0, SG_KMAP_ATOMIC |
> >> +						 SG_MAP_MUST_NOT_FAIL);
> > 
> > I assume that sg_map already adds sg->offset to the address?
> 
> Correct.
> 
> > Also wondering whether we can get rid of bvec_off and just increment bvec_data,
> > adding Julien who IIRC added this code.
> 
> bvec_off is used to keep track of the offset within the current mapping
> so it's not a great idea given that you'd want to kunmap_atomic the
> original address and not something with an offset. It would be nice if
> this could be converted to use the sg_miter interface but that's a much
> more invasive change that would require someone who knows this code and
> can properly test it. I'd be very grateful if someone actually took that on.

blkfront is one of the drivers I looked at, and it appears to only be
memcpying with the bvec_data pointer, so I wonder why it does not use
sg_copy_X_buffer instead..

Jason
--
To unsubscribe from this list: send the line "unsubscribe target-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Logan Gunthorpe April 27, 2017, 9:53 p.m. UTC | #4
On 27/04/17 02:53 PM, Jason Gunthorpe wrote:
> blkfront is one of the drivers I looked at, and it appears to only be
> memcpying with the bvec_data pointer, so I wonder why it does not use
> sg_copy_X_buffer instead..

Yes, sort of...

But you'd potentially end up calling sg_copy_to_buffer multiple times
per page within the sg (given that gnttab_foreach_grant_in_range might
call blkif_copy_from_grant/blkif_setup_rw_req_grant multiple times).
Even calling sg_copy_to_buffer once per page seems rather inefficient as
it uses sg_miter internally.

Switching the for_each_sg to sg_miter is probably the nicer solution as
it takes care of the mapping and the offset/length accounting for you
and will have similar performance.

But, yes, if performance is not an issue, switching it to
sg_copy_to_buffer would be a less invasive change than sg_miter. Which
the same might be said about a lot of these cases.

Unfortunately, changing from kmap_atomic (which is a null operation in a
lot of cases) to sg_copy_X_buffer is a pretty big performance hit.

Logan
--
To unsubscribe from this list: send the line "unsubscribe target-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jason Gunthorpe April 27, 2017, 10:11 p.m. UTC | #5
On Thu, Apr 27, 2017 at 03:53:37PM -0600, Logan Gunthorpe wrote:
> On 27/04/17 02:53 PM, Jason Gunthorpe wrote:
> > blkfront is one of the drivers I looked at, and it appears to only be
> > memcpying with the bvec_data pointer, so I wonder why it does not use
> > sg_copy_X_buffer instead..
> 
> But you'd potentially end up calling sg_copy_to_buffer multiple times
> per page within the sg (given that gnttab_foreach_grant_in_range might
> call blkif_copy_from_grant/blkif_setup_rw_req_grant multiple times).
> Even calling sg_copy_to_buffer once per page seems rather inefficient as
> it uses sg_miter internally.

Well, that is in the current form, with more users it would make sense
to optimize for the single page case, eg by providing the existing
call, providing a faster single-page-only variant of the copy, perhaps
even one that is inlined.

> Switching the for_each_sg to sg_miter is probably the nicer solution as
> it takes care of the mapping and the offset/length accounting for you
> and will have similar performance.

sg_miter will still fail when the sg contains __iomem, however I would
expect that the sg_copy will work with iomem, by using the __iomem
memcpy variant.

So, sg_copy should always be preferred in this new world with mixed
__iomem since it is the only primitive that can transparently handle
it.

Jason
--
To unsubscribe from this list: send the line "unsubscribe target-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Logan Gunthorpe April 27, 2017, 11:03 p.m. UTC | #6
On 27/04/17 04:11 PM, Jason Gunthorpe wrote:
> On Thu, Apr 27, 2017 at 03:53:37PM -0600, Logan Gunthorpe wrote:
> Well, that is in the current form, with more users it would make sense
> to optimize for the single page case, eg by providing the existing
> call, providing a faster single-page-only variant of the copy, perhaps
> even one that is inlined.

Ok, does it make sense then to have an sg_copy_page_to_buffer (or some
such... I'm having trouble thinking of a sane name that isn't too long).
That just does k(un)map_atomic and memcpy? I could try that if it makes
sense to people.

>> Switching the for_each_sg to sg_miter is probably the nicer solution as
>> it takes care of the mapping and the offset/length accounting for you
>> and will have similar performance.
> 
> sg_miter will still fail when the sg contains __iomem, however I would
> expect that the sg_copy will work with iomem, by using the __iomem
> memcpy variant.

Yes, that's true. Any sg_miters that ever see iomem will need to be
converted to support it. This isn't much different than the other
kmap(sg_page()) users I was converting that will also fail if they see
iomem. Though, I suspect an sg_miter user would be easier to convert to
iomem than a random kmap user.

Logan
--
To unsubscribe from this list: send the line "unsubscribe target-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jason Gunthorpe April 27, 2017, 11:20 p.m. UTC | #7
On Thu, Apr 27, 2017 at 05:03:45PM -0600, Logan Gunthorpe wrote:
> 
> 
> On 27/04/17 04:11 PM, Jason Gunthorpe wrote:
> > On Thu, Apr 27, 2017 at 03:53:37PM -0600, Logan Gunthorpe wrote:
> > Well, that is in the current form, with more users it would make sense
> > to optimize for the single page case, eg by providing the existing
> > call, providing a faster single-page-only variant of the copy, perhaps
> > even one that is inlined.
> 
> Ok, does it make sense then to have an sg_copy_page_to_buffer (or some
> such... I'm having trouble thinking of a sane name that isn't too long).
> That just does k(un)map_atomic and memcpy? I could try that if it makes
> sense to people.

It seems the most robust: test for iomem, and jump to a slow path
copy, otherwise inline the kmap and memcpy

Every place doing memcpy from sgl will need that pattern to be
correct.

> > sg_miter will still fail when the sg contains __iomem, however I would
> > expect that the sg_copy will work with iomem, by using the __iomem
> > memcpy variant.
> 
> Yes, that's true. Any sg_miters that ever see iomem will need to be
> converted to support it. This isn't much different than the other
> kmap(sg_page()) users I was converting that will also fail if they see
> iomem. Though, I suspect an sg_miter user would be easier to convert to
> iomem than a random kmap user.

How? sg_miter seems like the next nightmare down this path, what is
sg_miter_next supposed to do when something hits an iomem sgl?

miter.addr is supposed to be a kernel pointer that must not be
__iomem..

Jason
--
To unsubscribe from this list: send the line "unsubscribe target-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Logan Gunthorpe April 27, 2017, 11:29 p.m. UTC | #8
On 27/04/17 05:20 PM, Jason Gunthorpe wrote:
> It seems the most robust: test for iomem, and jump to a slow path
> copy, otherwise inline the kmap and memcpy
> 
> Every place doing memcpy from sgl will need that pattern to be
> correct.

Ok, sounds like a good place to start to me. I'll see what I can do for
a v3 of this set. Though, I probably won't send anything until after the
merge window.

>>> sg_miter will still fail when the sg contains __iomem, however I would
>>> expect that the sg_copy will work with iomem, by using the __iomem
>>> memcpy variant.
>>
>> Yes, that's true. Any sg_miters that ever see iomem will need to be
>> converted to support it. This isn't much different than the other
>> kmap(sg_page()) users I was converting that will also fail if they see
>> iomem. Though, I suspect an sg_miter user would be easier to convert to
>> iomem than a random kmap user.
> 
> How? sg_miter seems like the next nightmare down this path, what is
> sg_miter_next supposed to do when something hits an iomem sgl?

My proposal is roughly included in the draft I sent upthread. We add an
sg_miter flag indicating the iteratee supports iomem and if miter finds
iomem (with the support flag set) it sets ioaddr which is __iomem. The
iteratee then just needs to null check addr and ioaddr and perform the
appropriate action.

Logan

--
To unsubscribe from this list: send the line "unsubscribe target-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 3945963..ed62175 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -816,8 +816,9 @@  static int blkif_queue_rw_req(struct request *req, struct blkfront_ring_info *ri
 		BUG_ON(sg->offset + sg->length > PAGE_SIZE);
 
 		if (setup.need_copy) {
-			setup.bvec_off = sg->offset;
-			setup.bvec_data = kmap_atomic(sg_page(sg));
+			setup.bvec_off = 0;
+			setup.bvec_data = sg_map(sg, 0, SG_KMAP_ATOMIC |
+						 SG_MAP_MUST_NOT_FAIL);
 		}
 
 		gnttab_foreach_grant_in_range(sg_page(sg),
@@ -827,7 +828,7 @@  static int blkif_queue_rw_req(struct request *req, struct blkfront_ring_info *ri
 					      &setup);
 
 		if (setup.need_copy)
-			kunmap_atomic(setup.bvec_data);
+			sg_unmap(sg, setup.bvec_data, 0, SG_KMAP_ATOMIC);
 	}
 	if (setup.segments)
 		kunmap_atomic(setup.segments);
@@ -1053,7 +1054,7 @@  static int xen_translate_vdev(int vdevice, int *minor, unsigned int *offset)
 		case XEN_SCSI_DISK5_MAJOR:
 		case XEN_SCSI_DISK6_MAJOR:
 		case XEN_SCSI_DISK7_MAJOR:
-			*offset = (*minor / PARTS_PER_DISK) + 
+			*offset = (*minor / PARTS_PER_DISK) +
 				((major - XEN_SCSI_DISK1_MAJOR + 1) * 16) +
 				EMULATED_SD_DISK_NAME_OFFSET;
 			*minor = *minor +
@@ -1068,7 +1069,7 @@  static int xen_translate_vdev(int vdevice, int *minor, unsigned int *offset)
 		case XEN_SCSI_DISK13_MAJOR:
 		case XEN_SCSI_DISK14_MAJOR:
 		case XEN_SCSI_DISK15_MAJOR:
-			*offset = (*minor / PARTS_PER_DISK) + 
+			*offset = (*minor / PARTS_PER_DISK) +
 				((major - XEN_SCSI_DISK8_MAJOR + 8) * 16) +
 				EMULATED_SD_DISK_NAME_OFFSET;
 			*minor = *minor +
@@ -1119,7 +1120,7 @@  static int xlvbd_alloc_gendisk(blkif_sector_t capacity,
 	if (!VDEV_IS_EXTENDED(info->vdevice)) {
 		err = xen_translate_vdev(info->vdevice, &minor, &offset);
 		if (err)
-			return err;		
+			return err;
  		nr_parts = PARTS_PER_DISK;
 	} else {
 		minor = BLKIF_MINOR_EXT(info->vdevice);
@@ -1483,8 +1484,9 @@  static bool blkif_completion(unsigned long *id,
 		for_each_sg(s->sg, sg, num_sg, i) {
 			BUG_ON(sg->offset + sg->length > PAGE_SIZE);
 
-			data.bvec_offset = sg->offset;
-			data.bvec_data = kmap_atomic(sg_page(sg));
+			data.bvec_offset = 0;
+			data.bvec_data = sg_map(sg, 0, SG_KMAP_ATOMIC |
+						SG_MAP_MUST_NOT_FAIL);
 
 			gnttab_foreach_grant_in_range(sg_page(sg),
 						      sg->offset,
@@ -1492,7 +1494,7 @@  static bool blkif_completion(unsigned long *id,
 						      blkif_copy_from_grant,
 						      &data);
 
-			kunmap_atomic(data.bvec_data);
+			sg_unmap(sg, data.bvec_data, 0, SG_KMAP_ATOMIC);
 		}
 	}
 	/* Add the persistent grant into the list of free grants */