[v2] fstests: regression test for btrfs dio read repair
diff mbox

Message ID 1493230161-8809-1-git-send-email-bo.li.liu@oracle.com
State Not Applicable
Headers show

Commit Message

Liu Bo April 26, 2017, 6:09 p.m. UTC
This case tests whether dio read can repair the bad copy if we have
a good copy.

Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
introduced the regression.

The upstream fix is
	Btrfs: fix invalid dereference in btrfs_retry_endio

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
---
v2: - Add regression commit and the fix to the description
    - Use btrfs inspect-internal dump-tree to get rid of the dependence btrfs-map-logical
    - Add comments in several places

 tests/btrfs/140     | 167 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/140.out |  39 ++++++++++++
 tests/btrfs/group   |   1 +
 3 files changed, 207 insertions(+)
 create mode 100755 tests/btrfs/140
 create mode 100644 tests/btrfs/140.out

Comments

Filipe Manana April 28, 2017, 9:47 a.m. UTC | #1
On Wed, Apr 26, 2017 at 7:09 PM, Liu Bo <bo.li.liu@oracle.com> wrote:
> This case tests whether dio read can repair the bad copy if we have
> a good copy.
>
> Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> introduced the regression.
>
> The upstream fix is
>         Btrfs: fix invalid dereference in btrfs_retry_endio
>
> Signed-off-by: Liu Bo <bo.li.liu@oracle.com>

Thanks for doing this.

Just tested this, on a kernel with the mentioned fix, and it fails:

root 08:04:11 /home/fdmanana/git/hub/xfstests (master)> ./check btrfs/140
FSTYP         -- btrfs
PLATFORM      -- Linux/x86_64 debian3 4.10.0-rc8-btrfs-next-40+
MKFS_OPTIONS  -- /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1

btrfs/140 - output mismatch (see
/home/fdmanana/git/hub/xfstests/results//btrfs/140.out.bad)
    --- tests/btrfs/140.out 2017-04-28 07:59:13.069289130 +0100
    +++ /home/fdmanana/git/hub/xfstests/results//btrfs/140.out.bad
2017-04-28 08:04:18.209544574 +0100
    @@ -1,39 +1,39 @@
     QA output created by 140
     wrote 131072/131072 bytes at offset 0
     XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
    -wrote 65536/65536 bytes at offset 244056064
    +wrote 65536/65536 bytes at offset 1103101952
     XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
    -0e8c0000:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
................
    ...
    (Run 'diff -u tests/btrfs/140.out
/home/fdmanana/git/hub/xfstests/results//btrfs/140.out.bad'  to see
the entire diff)
Ran: btrfs/140
Failures: btrfs/140
Failed 1 of 1 tests

root 08:04:18 /home/fdmanana/git/hub/xfstests (master)>
root 08:04:27 /home/fdmanana/git/hub/xfstests (master)> diff -u
tests/btrfs/140.out
/home/fdmanana/git/hub/xfstests/results//btrfs/140.out.bad
--- tests/btrfs/140.out 2017-04-28 07:59:13.069289130 +0100
+++ /home/fdmanana/git/hub/xfstests/results//btrfs/140.out.bad
2017-04-28 08:04:18.209544574 +0100
@@ -1,39 +1,39 @@
 QA output created by 140
 wrote 131072/131072 bytes at offset 0
 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 65536/65536 bytes at offset 244056064
+wrote 65536/65536 bytes at offset 1103101952
 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-0e8c0000:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0010:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0020:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0030:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0040:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0050:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0060:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0070:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0080:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0090:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c00a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c00b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c00c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c00d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c00e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c00f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0100:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0110:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0120:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0130:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0140:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0150:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0160:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0170:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0180:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c0190:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c01a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c01b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c01c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c01d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c01e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-0e8c01f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
-read 512/512 bytes at offset 244056064
+41c00000:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00010:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00020:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00030:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00040:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00050:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00060:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00070:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00080:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00090:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c000a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c000b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c000c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c000d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c000e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c000f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00100:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00110:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00120:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00130:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00140:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00150:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00160:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00170:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00180:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c00190:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c001a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c001b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c001c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c001d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c001e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+41c001f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+read 512/512 bytes at offset 1103101952
 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

Tried with btrfs-progs 4.7 and 4.10.2.

thanks

> ---
> v2: - Add regression commit and the fix to the description
>     - Use btrfs inspect-internal dump-tree to get rid of the dependence btrfs-map-logical
>     - Add comments in several places
>
>  tests/btrfs/140     | 167 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/btrfs/140.out |  39 ++++++++++++
>  tests/btrfs/group   |   1 +
>  3 files changed, 207 insertions(+)
>  create mode 100755 tests/btrfs/140
>  create mode 100644 tests/btrfs/140.out
>
> diff --git a/tests/btrfs/140 b/tests/btrfs/140
> new file mode 100755
> index 0000000..63641b4
> --- /dev/null
> +++ b/tests/btrfs/140
> @@ -0,0 +1,167 @@
> +#! /bin/bash
> +# FS QA Test 140
> +#
> +# Regression test for btrfs DIO read's repair during read.
> +#
> +# Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> +# introduced the regression.
> +# The upstream fix is
> +#      Btrfs: fix invalid dereference in btrfs_retry_endio
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2017 Liu Bo.  All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1       # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +       cd /
> +       rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch_dev_pool 2
> +
> +_require_btrfs_command inspect-internal dump-tree
> +_require_command "$FILEFRAG_PROG" filefrag
> +_require_odirect
> +
> +# helpe to convert 'file offset' to btrfs logical offset
> +FILEFRAG_FILTER='
> +       if (/blocks? of (\d+) bytes/) {
> +               $blocksize = $1;
> +               next
> +       }
> +       ($ext, $logical, $physical, $length) =
> +               (/^\s*(\d+):\s+(\d+)..\s+\d+:\s+(\d+)..\s+\d+:\s+(\d+):/)
> +       or next;
> +       ($flags) = /.*:\s*(\S*)$/;
> +       print $physical * $blocksize, "#",
> +             $length * $blocksize, "#",
> +             $logical * $blocksize, "#",
> +             $flags, " "'
> +
> +# this makes filefrag output script readable by using a perl helper.
> +# output is one extent per line, with three numbers separated by '#'
> +# the numbers are: physical, length, logical (all in bytes)
> +# sample output: "1234#10#5678" -> physical 1234, length 10, logical 5678
> +_filter_extents()
> +{
> +       tee -a $seqres.full | $PERL_PROG -ne "$FILEFRAG_FILTER"
> +}
> +
> +_check_file_extents()
> +{
> +       cmd="filefrag -v $1"
> +       echo "# $cmd" >> $seqres.full
> +       out=`$cmd | _filter_extents`
> +       if [ -z "$out" ]; then
> +               return 1
> +       fi
> +       echo "after filter: $out" >> $seqres.full
> +       echo $out
> +       return 0
> +}
> +
> +_check_repair()
> +{
> +       filter=${1:-cat}
> +       dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | tac | $filter | grep -q -e "csum failed"
> +       if [ $? -eq 0 ]; then
> +               echo 1
> +       else
> +               echo 0
> +       fi
> +}
> +
> +_get_physical()
> +{
> +       # $1 is logical address
> +       # print chunk tree and find devid 2 which is $SCRATCH_DEV
> +       $BTRFS_UTIL_PROG inspect-internal dump-tree -t 3 $SCRATCH_DEV | grep $1 -A 6 | awk '($1 ~ /stripe/ && $3 ~ /devid/ && $4 ~ /1/) { print $6 }'
> +}
> +
> +_scratch_dev_pool_get 2
> +# step 1, create a raid1 btrfs which contains one 128k file.
> +echo "step 1......mkfs.btrfs" >>$seqres.full
> +
> +mkfs_opts="-d raid1"
> +_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1
> +
> +# -o nospace_cache makes sure data is written to the start position of the data
> +# chunk
> +_scratch_mount -o nospace_cache
> +
> +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" | _filter_xfs_io
> +
> +sync
> +
> +# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first
> +# one in $SCRATCH_DEV_POOL
> +echo "step 2......corrupt file extent" >>$seqres.full
> +
> +extents=`_check_file_extents $SCRATCH_MNT/foobar`
> +logical_in_btrfs=`echo ${extents} | cut -d '#' -f 1`
> +physical_on_scratch=`_get_physical ${logical_in_btrfs}`
> +
> +_scratch_unmount
> +$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $physical_on_scratch 64K" $SCRATCH_DEV | _filter_xfs_io
> +
> +_scratch_mount
> +
> +# step 3, 128k dio read (this read can repair bad copy)
> +echo "step 3......repair the bad copy" >>$seqres.full
> +
> +# since raid1 consists of two copies, and the following read may read the good
> +# copy directly, so lets loop 10 times here and discard output that dio reads
> +# give
> +for i in `seq 1 10`; do
> +       $XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null
> +       repair=`_check_repair`
> +       if [ $repair -eq 1 ]; then
> +               break
> +       fi
> +done
> +
> +_scratch_unmount
> +
> +# check if the repair works
> +$XFS_IO_PROG -d -c "pread -v -b 512 $physical_on_scratch 512" $SCRATCH_DEV | _filter_xfs_io
> +
> +_scratch_dev_pool_put
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/btrfs/140.out b/tests/btrfs/140.out
> new file mode 100644
> index 0000000..d8e3856
> --- /dev/null
> +++ b/tests/btrfs/140.out
> @@ -0,0 +1,39 @@
> +QA output created by 140
> +wrote 131072/131072 bytes at offset 0
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +wrote 65536/65536 bytes at offset 244056064
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +0e8c0000:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0010:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0020:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0030:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0040:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0050:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0060:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0070:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0080:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0090:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c00a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c00b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c00c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c00d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c00e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c00f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0100:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0110:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0120:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0130:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0140:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0150:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0160:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0170:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0180:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c0190:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c01a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c01b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c01c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c01d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c01e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +0e8c01f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +read 512/512 bytes at offset 244056064
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index 9d4b80b..1cb9c98 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -141,3 +141,4 @@
>  137 auto quick send
>  138 auto compress
>  139 auto qgroup
> +140 auto quick
> --
> 2.5.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/tests/btrfs/140 b/tests/btrfs/140
new file mode 100755
index 0000000..63641b4
--- /dev/null
+++ b/tests/btrfs/140
@@ -0,0 +1,167 @@ 
+#! /bin/bash
+# FS QA Test 140
+#
+# Regression test for btrfs DIO read's repair during read.
+#
+# Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
+# introduced the regression.
+# The upstream fix is
+# 	Btrfs: fix invalid dereference in btrfs_retry_endio
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2017 Liu Bo.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch_dev_pool 2
+
+_require_btrfs_command inspect-internal dump-tree
+_require_command "$FILEFRAG_PROG" filefrag
+_require_odirect
+
+# helpe to convert 'file offset' to btrfs logical offset
+FILEFRAG_FILTER='
+	if (/blocks? of (\d+) bytes/) {
+		$blocksize = $1;
+		next
+	}
+	($ext, $logical, $physical, $length) =
+		(/^\s*(\d+):\s+(\d+)..\s+\d+:\s+(\d+)..\s+\d+:\s+(\d+):/)
+	or next;
+	($flags) = /.*:\s*(\S*)$/;
+	print $physical * $blocksize, "#",
+	      $length * $blocksize, "#",
+	      $logical * $blocksize, "#",
+	      $flags, " "'
+
+# this makes filefrag output script readable by using a perl helper.
+# output is one extent per line, with three numbers separated by '#'
+# the numbers are: physical, length, logical (all in bytes)
+# sample output: "1234#10#5678" -> physical 1234, length 10, logical 5678
+_filter_extents()
+{
+	tee -a $seqres.full | $PERL_PROG -ne "$FILEFRAG_FILTER"
+}
+
+_check_file_extents()
+{
+	cmd="filefrag -v $1"
+	echo "# $cmd" >> $seqres.full
+	out=`$cmd | _filter_extents`
+	if [ -z "$out" ]; then
+		return 1
+	fi
+	echo "after filter: $out" >> $seqres.full
+	echo $out
+	return 0
+}
+
+_check_repair()
+{
+	filter=${1:-cat}
+	dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | tac | $filter | grep -q -e "csum failed"
+	if [ $? -eq 0 ]; then
+		echo 1
+	else
+		echo 0
+	fi
+}
+
+_get_physical()
+{
+	# $1 is logical address
+	# print chunk tree and find devid 2 which is $SCRATCH_DEV
+	$BTRFS_UTIL_PROG inspect-internal dump-tree -t 3 $SCRATCH_DEV | grep $1 -A 6 | awk '($1 ~ /stripe/ && $3 ~ /devid/ && $4 ~ /1/) { print $6 }'
+}
+
+_scratch_dev_pool_get 2
+# step 1, create a raid1 btrfs which contains one 128k file.
+echo "step 1......mkfs.btrfs" >>$seqres.full
+
+mkfs_opts="-d raid1"
+_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1
+
+# -o nospace_cache makes sure data is written to the start position of the data
+# chunk
+_scratch_mount -o nospace_cache
+
+$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" | _filter_xfs_io
+
+sync
+
+# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first
+# one in $SCRATCH_DEV_POOL
+echo "step 2......corrupt file extent" >>$seqres.full
+
+extents=`_check_file_extents $SCRATCH_MNT/foobar`
+logical_in_btrfs=`echo ${extents} | cut -d '#' -f 1`
+physical_on_scratch=`_get_physical ${logical_in_btrfs}`
+
+_scratch_unmount
+$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $physical_on_scratch 64K" $SCRATCH_DEV | _filter_xfs_io
+
+_scratch_mount
+
+# step 3, 128k dio read (this read can repair bad copy)
+echo "step 3......repair the bad copy" >>$seqres.full
+
+# since raid1 consists of two copies, and the following read may read the good
+# copy directly, so lets loop 10 times here and discard output that dio reads
+# give
+for i in `seq 1 10`; do
+	$XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null
+	repair=`_check_repair`
+	if [ $repair -eq 1 ]; then
+		break
+	fi
+done
+
+_scratch_unmount
+
+# check if the repair works
+$XFS_IO_PROG -d -c "pread -v -b 512 $physical_on_scratch 512" $SCRATCH_DEV | _filter_xfs_io
+
+_scratch_dev_pool_put
+# success, all done
+status=0
+exit
diff --git a/tests/btrfs/140.out b/tests/btrfs/140.out
new file mode 100644
index 0000000..d8e3856
--- /dev/null
+++ b/tests/btrfs/140.out
@@ -0,0 +1,39 @@ 
+QA output created by 140
+wrote 131072/131072 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 65536/65536 bytes at offset 244056064
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+0e8c0000:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0010:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0020:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0030:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0040:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0050:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0060:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0070:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0080:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0090:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c00a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c00b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c00c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c00d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c00e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c00f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0100:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0110:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0120:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0130:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0140:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0150:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0160:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0170:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0180:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c0190:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c01a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c01b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c01c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c01d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c01e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+0e8c01f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+read 512/512 bytes at offset 244056064
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
diff --git a/tests/btrfs/group b/tests/btrfs/group
index 9d4b80b..1cb9c98 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -141,3 +141,4 @@ 
 137 auto quick send
 138 auto compress
 139 auto qgroup
+140 auto quick