[v3] fstests: regression test for btrfs dio read repair
diff mbox

Message ID 1493400352-5845-1-git-send-email-bo.li.liu@oracle.com
State Not Applicable
Headers show

Commit Message

Liu Bo April 28, 2017, 5:25 p.m. UTC
This case tests whether dio read can repair the bad copy if we have
a good copy.

Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
introduced the regression.

The upstream fix is
	Btrfs: fix invalid dereference in btrfs_retry_endio

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
---
v2: - Add regression commit and the fix to the description
    - Use btrfs inspect-internal dump-tree to get rid of the dependence btrfs-map-logical
    - Add comments in several places

v3: - Add 'mkfs -b 1G' to limit filesystem size to 2G in raid1 profile so that
      we get a consistent output.

 tests/btrfs/140     | 167 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/140.out |  39 ++++++++++++
 tests/btrfs/group   |   1 +
 3 files changed, 207 insertions(+)
 create mode 100755 tests/btrfs/140
 create mode 100644 tests/btrfs/140.out

Comments

Filipe Manana May 2, 2017, 2:37 p.m. UTC | #1
On Fri, Apr 28, 2017 at 6:25 PM, Liu Bo <bo.li.liu@oracle.com> wrote:
> This case tests whether dio read can repair the bad copy if we have
> a good copy.
>
> Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> introduced the regression.
>
> The upstream fix is
>         Btrfs: fix invalid dereference in btrfs_retry_endio
>
> Signed-off-by: Liu Bo <bo.li.liu@oracle.com>

Reviewed-by: Filipe Manana <fdmanana@suse.com>

Just a comment below.

> ---
> v2: - Add regression commit and the fix to the description
>     - Use btrfs inspect-internal dump-tree to get rid of the dependence btrfs-map-logical
>     - Add comments in several places
>
> v3: - Add 'mkfs -b 1G' to limit filesystem size to 2G in raid1 profile so that
>       we get a consistent output.
>
>  tests/btrfs/140     | 167 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/btrfs/140.out |  39 ++++++++++++
>  tests/btrfs/group   |   1 +
>  3 files changed, 207 insertions(+)
>  create mode 100755 tests/btrfs/140
>  create mode 100644 tests/btrfs/140.out
>
> diff --git a/tests/btrfs/140 b/tests/btrfs/140
> new file mode 100755
> index 0000000..dcd8807
> --- /dev/null
> +++ b/tests/btrfs/140
> @@ -0,0 +1,167 @@
> +#! /bin/bash
> +# FS QA Test 140
> +#
> +# Regression test for btrfs DIO read's repair during read.
> +#
> +# Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> +# introduced the regression.
> +# The upstream fix is
> +#      Btrfs: fix invalid dereference in btrfs_retry_endio
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2017 Liu Bo.  All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1       # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +       cd /
> +       rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch_dev_pool 2
> +
> +_require_btrfs_command inspect-internal dump-tree
> +_require_command "$FILEFRAG_PROG" filefrag
> +_require_odirect
> +
> +# helpe to convert 'file offset' to btrfs logical offset
> +FILEFRAG_FILTER='
> +       if (/blocks? of (\d+) bytes/) {
> +               $blocksize = $1;
> +               next
> +       }
> +       ($ext, $logical, $physical, $length) =
> +               (/^\s*(\d+):\s+(\d+)..\s+\d+:\s+(\d+)..\s+\d+:\s+(\d+):/)
> +       or next;
> +       ($flags) = /.*:\s*(\S*)$/;
> +       print $physical * $blocksize, "#",
> +             $length * $blocksize, "#",
> +             $logical * $blocksize, "#",
> +             $flags, " "'
> +
> +# this makes filefrag output script readable by using a perl helper.
> +# output is one extent per line, with three numbers separated by '#'
> +# the numbers are: physical, length, logical (all in bytes)
> +# sample output: "1234#10#5678" -> physical 1234, length 10, logical 5678
> +_filter_extents()
> +{
> +       tee -a $seqres.full | $PERL_PROG -ne "$FILEFRAG_FILTER"
> +}
> +
> +_check_file_extents()
> +{
> +       cmd="filefrag -v $1"
> +       echo "# $cmd" >> $seqres.full
> +       out=`$cmd | _filter_extents`
> +       if [ -z "$out" ]; then
> +               return 1
> +       fi
> +       echo "after filter: $out" >> $seqres.full
> +       echo $out
> +       return 0
> +}
> +
> +_check_repair()
> +{
> +       filter=${1:-cat}
> +       dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | tac | $filter | grep -q -e "csum failed"
> +       if [ $? -eq 0 ]; then
> +               echo 1
> +       else
> +               echo 0
> +       fi
> +}
> +
> +_get_physical()
> +{
> +       # $1 is logical address
> +       # print chunk tree and find devid 2 which is $SCRATCH_DEV
> +       $BTRFS_UTIL_PROG inspect-internal dump-tree -t 3 $SCRATCH_DEV | grep $1 -A 6 | awk '($1 ~ /stripe/ && $3 ~ /devid/ && $4 ~ /1/) { print $6 }'
> +}
> +
> +_scratch_dev_pool_get 2
> +# step 1, create a raid1 btrfs which contains one 128k file.
> +echo "step 1......mkfs.btrfs" >>$seqres.full
> +
> +mkfs_opts="-d raid1 -b 1G"
> +_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1
> +
> +# -o nospace_cache makes sure data is written to the start position of the data
> +# chunk
> +_scratch_mount -o nospace_cache
> +
> +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" | _filter_xfs_io
> +
> +sync

The sync is not necessary, since we cleanly unmount the fs below.

The test works now with a patched kernel and fails with an unpatched
kernel as expected.

Looks good to me, but FILEFRAG_FILTER, _filter_extents,
_check_file_extents, _get_physical and _check_repair are duplicated
across all the 4 test case files in the series. Could be factored into
common/btrfs later for example.

> +
> +# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first
> +# one in $SCRATCH_DEV_POOL
> +echo "step 2......corrupt file extent" >>$seqres.full
> +
> +extents=`_check_file_extents $SCRATCH_MNT/foobar`
> +logical_in_btrfs=`echo ${extents} | cut -d '#' -f 1`
> +physical_on_scratch=`_get_physical ${logical_in_btrfs}`
> +
> +_scratch_unmount
> +$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $physical_on_scratch 64K" $SCRATCH_DEV | _filter_xfs_io
> +
> +_scratch_mount
> +
> +# step 3, 128k dio read (this read can repair bad copy)
> +echo "step 3......repair the bad copy" >>$seqres.full
> +
> +# since raid1 consists of two copies, and the following read may read the good
> +# copy directly, so lets loop 10 times here and discard output that dio reads
> +# give
> +for i in `seq 1 10`; do
> +       $XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null
> +       repair=`_check_repair`
> +       if [ $repair -eq 1 ]; then
> +               break
> +       fi
> +done
> +
> +_scratch_unmount
> +
> +# check if the repair works
> +$XFS_IO_PROG -d -c "pread -v -b 512 $physical_on_scratch 512" $SCRATCH_DEV | _filter_xfs_io
> +
> +_scratch_dev_pool_put
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/btrfs/140.out b/tests/btrfs/140.out
> new file mode 100644
> index 0000000..c8565f5
> --- /dev/null
> +++ b/tests/btrfs/140.out
> @@ -0,0 +1,39 @@
> +QA output created by 140
> +wrote 131072/131072 bytes at offset 0
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +wrote 65536/65536 bytes at offset 136708096
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +08260000:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260010:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260020:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260030:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260040:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260050:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260060:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260070:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260080:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260090:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260100:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260110:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260120:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260130:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260140:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260150:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260160:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260170:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260180:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260190:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +read 512/512 bytes at offset 136708096
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index 9d4b80b..1cb9c98 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -141,3 +141,4 @@
>  137 auto quick send
>  138 auto compress
>  139 auto qgroup
> +140 auto quick
> --
> 2.5.0
>
Eryu Guan May 3, 2017, 10:08 a.m. UTC | #2
On Fri, Apr 28, 2017 at 11:25:52AM -0600, Liu Bo wrote:
> This case tests whether dio read can repair the bad copy if we have
> a good copy.
> 
> Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> introduced the regression.
> 
> The upstream fix is
> 	Btrfs: fix invalid dereference in btrfs_retry_endio
> 
> Signed-off-by: Liu Bo <bo.li.liu@oracle.com>

Sorry for the late review, and many thanks to Filipe's reviews! I agreed
with Filipe that the common helpers can be placed in common/btrfs and/or
common/rc files.

Some thoughts inline.

> ---
> v2: - Add regression commit and the fix to the description
>     - Use btrfs inspect-internal dump-tree to get rid of the dependence btrfs-map-logical
>     - Add comments in several places
> 
> v3: - Add 'mkfs -b 1G' to limit filesystem size to 2G in raid1 profile so that
>       we get a consistent output.
> 
>  tests/btrfs/140     | 167 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/btrfs/140.out |  39 ++++++++++++
>  tests/btrfs/group   |   1 +
>  3 files changed, 207 insertions(+)
>  create mode 100755 tests/btrfs/140
>  create mode 100644 tests/btrfs/140.out
> 
> diff --git a/tests/btrfs/140 b/tests/btrfs/140
> new file mode 100755
> index 0000000..dcd8807
> --- /dev/null
> +++ b/tests/btrfs/140
> @@ -0,0 +1,167 @@
> +#! /bin/bash
> +# FS QA Test 140
> +#
> +# Regression test for btrfs DIO read's repair during read.
> +#
> +# Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> +# introduced the regression.
> +# The upstream fix is
> +# 	Btrfs: fix invalid dereference in btrfs_retry_endio
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2017 Liu Bo.  All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch_dev_pool 2
> +
> +_require_btrfs_command inspect-internal dump-tree
> +_require_command "$FILEFRAG_PROG" filefrag
> +_require_odirect
> +
> +# helpe to convert 'file offset' to btrfs logical offset
> +FILEFRAG_FILTER='
> +	if (/blocks? of (\d+) bytes/) {
> +		$blocksize = $1;
> +		next
> +	}
> +	($ext, $logical, $physical, $length) =
> +		(/^\s*(\d+):\s+(\d+)..\s+\d+:\s+(\d+)..\s+\d+:\s+(\d+):/)
> +	or next;
> +	($flags) = /.*:\s*(\S*)$/;
> +	print $physical * $blocksize, "#",
> +	      $length * $blocksize, "#",
> +	      $logical * $blocksize, "#",
> +	      $flags, " "'
                      ^^^ "\n" so one extent per line?

This can be embedded in the filter function, like what _filter_mkfs
does.

> +
> +# this makes filefrag output script readable by using a perl helper.
> +# output is one extent per line, with three numbers separated by '#'
> +# the numbers are: physical, length, logical (all in bytes)
> +# sample output: "1234#10#5678" -> physical 1234, length 10, logical 5678
> +_filter_extents()

Global functions start with underscore, local functions don't.

> +{
> +	tee -a $seqres.full | $PERL_PROG -ne "$FILEFRAG_FILTER"

I don't think this tee belongs here, see below.

> +}
> +
> +_check_file_extents()
> +{
> +	cmd="filefrag -v $1"

$FILEFRAG_PROG

> +	echo "# $cmd" >> $seqres.full

Just call filefrag -v again to dump the filefrag output to $seqres.full

> +	out=`$cmd | _filter_extents`
> +	if [ -z "$out" ]; then
> +		return 1
> +	fi
> +	echo "after filter: $out" >> $seqres.full
> +	echo $out
> +	return 0
> +}

Hmm, seems that all you want from all these filters is the logical byte
of the first extent in the file. How about converting
_check_file_extents to _filter_filefrag and put it in common/filter?
And _get_physical can also be converted to _btrfs_get_physical and
placed in common/btrfs
e.g.

common/filter:
# <comments>
_filter_filefrag()
{
	perl -ne '
	<all the perl filter code here>
	<like what _filter_mkfs does>
	'
}

then

logical_in_btrfs=`$FILEFRAG -v $SCRATCH_MNT/foobar | _filter_filefrag | cut -d '#' -f 1`
physical_on_scratch=`_btrfs_get_physical $logical_in_btrfs`

> +
> +_check_repair()
> +{
> +	filter=${1:-cat}

filter is not used in these test, can be removed.

> +	dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | tac | $filter | grep -q -e "csum failed"

This code is taken from _check_dmesg, I think we can factor out a new
helper to dump dmesg of current test, e.g.

_get_current_dmesg()
{
	dmesg | tac | sed -ne .... | tac
}

and the detection for "csum failed" can be

for i in `seq 1 10`; do
	$XFS_IO_PROG ...
	_get_current_dmesg | grep -q -e "csum failed" && break
done

and _check_dmesg would be like

_check_dmesg()
{
	....
	_get_current_dmesg | $filter >$seqres.dmesg
	grep -q -e "Kernel BUG at" \
	...
}

> +	if [ $? -eq 0 ]; then
> +		echo 1
> +	else
> +		echo 0
> +	fi
> +}
> +
> +_get_physical()
> +{
> +	# $1 is logical address
> +	# print chunk tree and find devid 2 which is $SCRATCH_DEV
> +	$BTRFS_UTIL_PROG inspect-internal dump-tree -t 3 $SCRATCH_DEV | grep $1 -A 6 | awk '($1 ~ /stripe/ && $3 ~ /devid/ && $4 ~ /1/) { print $6 }'
> +}
> +
> +_scratch_dev_pool_get 2
> +# step 1, create a raid1 btrfs which contains one 128k file.
> +echo "step 1......mkfs.btrfs" >>$seqres.full
> +
> +mkfs_opts="-d raid1 -b 1G"
> +_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1
> +
> +# -o nospace_cache makes sure data is written to the start position of the data
> +# chunk
> +_scratch_mount -o nospace_cache
> +
> +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" | _filter_xfs_io
> +
> +sync
> +
> +# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first
> +# one in $SCRATCH_DEV_POOL
> +echo "step 2......corrupt file extent" >>$seqres.full
> +
> +extents=`_check_file_extents $SCRATCH_MNT/foobar`
> +logical_in_btrfs=`echo ${extents} | cut -d '#' -f 1`
> +physical_on_scratch=`_get_physical ${logical_in_btrfs}`
> +
> +_scratch_unmount
> +$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $physical_on_scratch 64K" $SCRATCH_DEV | _filter_xfs_io
> +
> +_scratch_mount
> +
> +# step 3, 128k dio read (this read can repair bad copy)
> +echo "step 3......repair the bad copy" >>$seqres.full
> +
> +# since raid1 consists of two copies, and the following read may read the good
> +# copy directly, so lets loop 10 times here and discard output that dio reads
> +# give
> +for i in `seq 1 10`; do
> +	$XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null
> +	repair=`_check_repair`
> +	if [ $repair -eq 1 ]; then
> +		break
> +	fi
> +done

But do we need really to stop at the first read csum failure, if 10
times is enough to read from the bad copy? If there's no need to break
out the loop, all the dmesg search work can be skipped too.

The same comments apply to all other three patches.

Thanks,
Eryu

> +
> +_scratch_unmount
> +
> +# check if the repair works
> +$XFS_IO_PROG -d -c "pread -v -b 512 $physical_on_scratch 512" $SCRATCH_DEV | _filter_xfs_io
> +
> +_scratch_dev_pool_put
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/btrfs/140.out b/tests/btrfs/140.out
> new file mode 100644
> index 0000000..c8565f5
> --- /dev/null
> +++ b/tests/btrfs/140.out
> @@ -0,0 +1,39 @@
> +QA output created by 140
> +wrote 131072/131072 bytes at offset 0
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +wrote 65536/65536 bytes at offset 136708096
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +08260000:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260010:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260020:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260030:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260040:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260050:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260060:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260070:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260080:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260090:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260100:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260110:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260120:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260130:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260140:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260150:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260160:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260170:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260180:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260190:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +read 512/512 bytes at offset 136708096
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index 9d4b80b..1cb9c98 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -141,3 +141,4 @@
>  137 auto quick send
>  138 auto compress
>  139 auto qgroup
> +140 auto quick
> -- 
> 2.5.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Liu Bo May 8, 2017, 6:43 p.m. UTC | #3
On Tue, May 02, 2017 at 03:37:15PM +0100, Filipe Manana wrote:
> On Fri, Apr 28, 2017 at 6:25 PM, Liu Bo <bo.li.liu@oracle.com> wrote:
> > This case tests whether dio read can repair the bad copy if we have
> > a good copy.
> >
> > Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> > introduced the regression.
> >
> > The upstream fix is
> >         Btrfs: fix invalid dereference in btrfs_retry_endio
> >
> > Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
> 
> Reviewed-by: Filipe Manana <fdmanana@suse.com>
> 
> Just a comment below.
> 
> > ---
> > v2: - Add regression commit and the fix to the description
> >     - Use btrfs inspect-internal dump-tree to get rid of the dependence btrfs-map-logical
> >     - Add comments in several places
> >
> > v3: - Add 'mkfs -b 1G' to limit filesystem size to 2G in raid1 profile so that
> >       we get a consistent output.
> >
> >  tests/btrfs/140     | 167 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  tests/btrfs/140.out |  39 ++++++++++++
> >  tests/btrfs/group   |   1 +
> >  3 files changed, 207 insertions(+)
> >  create mode 100755 tests/btrfs/140
> >  create mode 100644 tests/btrfs/140.out
> >
> > diff --git a/tests/btrfs/140 b/tests/btrfs/140
> > new file mode 100755
> > index 0000000..dcd8807
> > --- /dev/null
> > +++ b/tests/btrfs/140
> > @@ -0,0 +1,167 @@
> > +#! /bin/bash
> > +# FS QA Test 140
> > +#
> > +# Regression test for btrfs DIO read's repair during read.
> > +#
> > +# Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> > +# introduced the regression.
> > +# The upstream fix is
> > +#      Btrfs: fix invalid dereference in btrfs_retry_endio
> > +#
> > +#-----------------------------------------------------------------------
> > +# Copyright (c) 2017 Liu Bo.  All Rights Reserved.
> > +#
> > +# This program is free software; you can redistribute it and/or
> > +# modify it under the terms of the GNU General Public License as
> > +# published by the Free Software Foundation.
> > +#
> > +# This program is distributed in the hope that it would be useful,
> > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > +# GNU General Public License for more details.
> > +#
> > +# You should have received a copy of the GNU General Public License
> > +# along with this program; if not, write the Free Software Foundation,
> > +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> > +#-----------------------------------------------------------------------
> > +#
> > +
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1       # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > +       cd /
> > +       rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +# real QA test starts here
> > +
> > +# Modify as appropriate.
> > +_supported_fs btrfs
> > +_supported_os Linux
> > +_require_scratch_dev_pool 2
> > +
> > +_require_btrfs_command inspect-internal dump-tree
> > +_require_command "$FILEFRAG_PROG" filefrag
> > +_require_odirect
> > +
> > +# helpe to convert 'file offset' to btrfs logical offset
> > +FILEFRAG_FILTER='
> > +       if (/blocks? of (\d+) bytes/) {
> > +               $blocksize = $1;
> > +               next
> > +       }
> > +       ($ext, $logical, $physical, $length) =
> > +               (/^\s*(\d+):\s+(\d+)..\s+\d+:\s+(\d+)..\s+\d+:\s+(\d+):/)
> > +       or next;
> > +       ($flags) = /.*:\s*(\S*)$/;
> > +       print $physical * $blocksize, "#",
> > +             $length * $blocksize, "#",
> > +             $logical * $blocksize, "#",
> > +             $flags, " "'
> > +
> > +# this makes filefrag output script readable by using a perl helper.
> > +# output is one extent per line, with three numbers separated by '#'
> > +# the numbers are: physical, length, logical (all in bytes)
> > +# sample output: "1234#10#5678" -> physical 1234, length 10, logical 5678
> > +_filter_extents()
> > +{
> > +       tee -a $seqres.full | $PERL_PROG -ne "$FILEFRAG_FILTER"
> > +}
> > +
> > +_check_file_extents()
> > +{
> > +       cmd="filefrag -v $1"
> > +       echo "# $cmd" >> $seqres.full
> > +       out=`$cmd | _filter_extents`
> > +       if [ -z "$out" ]; then
> > +               return 1
> > +       fi
> > +       echo "after filter: $out" >> $seqres.full
> > +       echo $out
> > +       return 0
> > +}
> > +
> > +_check_repair()
> > +{
> > +       filter=${1:-cat}
> > +       dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | tac | $filter | grep -q -e "csum failed"
> > +       if [ $? -eq 0 ]; then
> > +               echo 1
> > +       else
> > +               echo 0
> > +       fi
> > +}
> > +
> > +_get_physical()
> > +{
> > +       # $1 is logical address
> > +       # print chunk tree and find devid 2 which is $SCRATCH_DEV
> > +       $BTRFS_UTIL_PROG inspect-internal dump-tree -t 3 $SCRATCH_DEV | grep $1 -A 6 | awk '($1 ~ /stripe/ && $3 ~ /devid/ && $4 ~ /1/) { print $6 }'
> > +}
> > +
> > +_scratch_dev_pool_get 2
> > +# step 1, create a raid1 btrfs which contains one 128k file.
> > +echo "step 1......mkfs.btrfs" >>$seqres.full
> > +
> > +mkfs_opts="-d raid1 -b 1G"
> > +_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1
> > +
> > +# -o nospace_cache makes sure data is written to the start position of the data
> > +# chunk
> > +_scratch_mount -o nospace_cache
> > +
> > +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" | _filter_xfs_io
> > +
> > +sync
> 
> The sync is not necessary, since we cleanly unmount the fs below.
>

Oops, good catch.

> The test works now with a patched kernel and fails with an unpatched
> kernel as expected.
>

Thanks for trying it out.

> Looks good to me, but FILEFRAG_FILTER, _filter_extents,
> _check_file_extents, _get_physical and _check_repair are duplicated
> across all the 4 test case files in the series. Could be factored into
> common/btrfs later for example.
>

Sure, this piece of code is taken from the scrub testcase, so it'd be
a good candidate for common/btrfs.

Thanks,

-liubo
> > +
> > +# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first
> > +# one in $SCRATCH_DEV_POOL
> > +echo "step 2......corrupt file extent" >>$seqres.full
> > +
> > +extents=`_check_file_extents $SCRATCH_MNT/foobar`
> > +logical_in_btrfs=`echo ${extents} | cut -d '#' -f 1`
> > +physical_on_scratch=`_get_physical ${logical_in_btrfs}`
> > +
> > +_scratch_unmount
> > +$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $physical_on_scratch 64K" $SCRATCH_DEV | _filter_xfs_io
> > +
> > +_scratch_mount
> > +
> > +# step 3, 128k dio read (this read can repair bad copy)
> > +echo "step 3......repair the bad copy" >>$seqres.full
> > +
> > +# since raid1 consists of two copies, and the following read may read the good
> > +# copy directly, so lets loop 10 times here and discard output that dio reads
> > +# give
> > +for i in `seq 1 10`; do
> > +       $XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null
> > +       repair=`_check_repair`
> > +       if [ $repair -eq 1 ]; then
> > +               break
> > +       fi
> > +done
> > +
> > +_scratch_unmount
> > +
> > +# check if the repair works
> > +$XFS_IO_PROG -d -c "pread -v -b 512 $physical_on_scratch 512" $SCRATCH_DEV | _filter_xfs_io
> > +
> > +_scratch_dev_pool_put
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/btrfs/140.out b/tests/btrfs/140.out
> > new file mode 100644
> > index 0000000..c8565f5
> > --- /dev/null
> > +++ b/tests/btrfs/140.out
> > @@ -0,0 +1,39 @@
> > +QA output created by 140
> > +wrote 131072/131072 bytes at offset 0
> > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> > +wrote 65536/65536 bytes at offset 136708096
> > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> > +08260000:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260010:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260020:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260030:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260040:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260050:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260060:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260070:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260080:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260090:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082600a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082600b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082600c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082600d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082600e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082600f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260100:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260110:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260120:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260130:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260140:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260150:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260160:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260170:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260180:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260190:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082601a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082601b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082601c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082601d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082601e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082601f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +read 512/512 bytes at offset 136708096
> > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> > diff --git a/tests/btrfs/group b/tests/btrfs/group
> > index 9d4b80b..1cb9c98 100644
> > --- a/tests/btrfs/group
> > +++ b/tests/btrfs/group
> > @@ -141,3 +141,4 @@
> >  137 auto quick send
> >  138 auto compress
> >  139 auto qgroup
> > +140 auto quick
> > --
> > 2.5.0
> >
> 
> 
> 
> -- 
> Filipe David Manana,
> 
> “Whether you think you can, or you think you can't — you're right.”
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Liu Bo May 8, 2017, 7:50 p.m. UTC | #4
On Wed, May 03, 2017 at 06:08:36PM +0800, Eryu Guan wrote:
> On Fri, Apr 28, 2017 at 11:25:52AM -0600, Liu Bo wrote:
> > This case tests whether dio read can repair the bad copy if we have
> > a good copy.
> > 
> > Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> > introduced the regression.
> > 
> > The upstream fix is
> > 	Btrfs: fix invalid dereference in btrfs_retry_endio
> > 
> > Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
> 
> Sorry for the late review, and many thanks to Filipe's reviews! I agreed
> with Filipe that the common helpers can be placed in common/btrfs and/or
> common/rc files.
> 
> Some thoughts inline.
> 
> > ---
> > v2: - Add regression commit and the fix to the description
> >     - Use btrfs inspect-internal dump-tree to get rid of the dependence btrfs-map-logical
> >     - Add comments in several places
> > 
> > v3: - Add 'mkfs -b 1G' to limit filesystem size to 2G in raid1 profile so that
> >       we get a consistent output.
> > 
> >  tests/btrfs/140     | 167 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  tests/btrfs/140.out |  39 ++++++++++++
> >  tests/btrfs/group   |   1 +
> >  3 files changed, 207 insertions(+)
> >  create mode 100755 tests/btrfs/140
> >  create mode 100644 tests/btrfs/140.out
> > 
> > diff --git a/tests/btrfs/140 b/tests/btrfs/140
> > new file mode 100755
> > index 0000000..dcd8807
> > --- /dev/null
> > +++ b/tests/btrfs/140
> > @@ -0,0 +1,167 @@
> > +#! /bin/bash
> > +# FS QA Test 140
> > +#
> > +# Regression test for btrfs DIO read's repair during read.
> > +#
> > +# Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> > +# introduced the regression.
> > +# The upstream fix is
> > +# 	Btrfs: fix invalid dereference in btrfs_retry_endio
> > +#
> > +#-----------------------------------------------------------------------
> > +# Copyright (c) 2017 Liu Bo.  All Rights Reserved.
> > +#
> > +# This program is free software; you can redistribute it and/or
> > +# modify it under the terms of the GNU General Public License as
> > +# published by the Free Software Foundation.
> > +#
> > +# This program is distributed in the hope that it would be useful,
> > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > +# GNU General Public License for more details.
> > +#
> > +# You should have received a copy of the GNU General Public License
> > +# along with this program; if not, write the Free Software Foundation,
> > +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> > +#-----------------------------------------------------------------------
> > +#
> > +
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1	# failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > +	cd /
> > +	rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +# real QA test starts here
> > +
> > +# Modify as appropriate.
> > +_supported_fs btrfs
> > +_supported_os Linux
> > +_require_scratch_dev_pool 2
> > +
> > +_require_btrfs_command inspect-internal dump-tree
> > +_require_command "$FILEFRAG_PROG" filefrag
> > +_require_odirect
> > +
> > +# helpe to convert 'file offset' to btrfs logical offset
> > +FILEFRAG_FILTER='
> > +	if (/blocks? of (\d+) bytes/) {
> > +		$blocksize = $1;
> > +		next
> > +	}
> > +	($ext, $logical, $physical, $length) =
> > +		(/^\s*(\d+):\s+(\d+)..\s+\d+:\s+(\d+)..\s+\d+:\s+(\d+):/)
> > +	or next;
> > +	($flags) = /.*:\s*(\S*)$/;
> > +	print $physical * $blocksize, "#",
> > +	      $length * $blocksize, "#",
> > +	      $logical * $blocksize, "#",
> > +	      $flags, " "'
>                       ^^^ "\n" so one extent per line?
> 
> This can be embedded in the filter function, like what _filter_mkfs
> does.
>

OK.

> > +
> > +# this makes filefrag output script readable by using a perl helper.
> > +# output is one extent per line, with three numbers separated by '#'
> > +# the numbers are: physical, length, logical (all in bytes)
> > +# sample output: "1234#10#5678" -> physical 1234, length 10, logical 5678
> > +_filter_extents()
> 
> Global functions start with underscore, local functions don't.
> 

OK.

> > +{
> > +	tee -a $seqres.full | $PERL_PROG -ne "$FILEFRAG_FILTER"
> 
> I don't think this tee belongs here, see below.
> 
> > +}
> > +
> > +_check_file_extents()
> > +{
> > +	cmd="filefrag -v $1"
> 
> $FILEFRAG_PROG
> 
> > +	echo "# $cmd" >> $seqres.full
> 
> Just call filefrag -v again to dump the filefrag output to $seqres.full
> 

Make sense.

> > +	out=`$cmd | _filter_extents`
> > +	if [ -z "$out" ]; then
> > +		return 1
> > +	fi
> > +	echo "after filter: $out" >> $seqres.full
> > +	echo $out
> > +	return 0
> > +}
> 
> Hmm, seems that all you want from all these filters is the logical byte
> of the first extent in the file. How about converting
> _check_file_extents to _filter_filefrag and put it in common/filter?
> And _get_physical can also be converted to _btrfs_get_physical and
> placed in common/btrfs
> e.g.
> 
> common/filter:
> # <comments>
> _filter_filefrag()
> {
> 	perl -ne '
> 	<all the perl filter code here>
> 	<like what _filter_mkfs does>
> 	'
> }
> 
> then
> 
> logical_in_btrfs=`$FILEFRAG -v $SCRATCH_MNT/foobar | _filter_filefrag | cut -d '#' -f 1`
> physical_on_scratch=`_btrfs_get_physical $logical_in_btrfs`
>

Sounds good.

> > +
> > +_check_repair()
> > +{
> > +	filter=${1:-cat}
> 
> filter is not used in these test, can be removed.
> 
> > +	dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | tac | $filter | grep -q -e "csum failed"
> 
> This code is taken from _check_dmesg, I think we can factor out a new
> helper to dump dmesg of current test, e.g.
> 
> _get_current_dmesg()
> {
> 	dmesg | tac | sed -ne .... | tac
> }
> 
> and the detection for "csum failed" can be
> 
> for i in `seq 1 10`; do
> 	$XFS_IO_PROG ...
> 	_get_current_dmesg | grep -q -e "csum failed" && break
> done
> 
> and _check_dmesg would be like
> 
> _check_dmesg()
> {
> 	....
> 	_get_current_dmesg | $filter >$seqres.dmesg
> 	grep -q -e "Kernel BUG at" \
> 	...
> }
> 

OK.

> > +	if [ $? -eq 0 ]; then
> > +		echo 1
> > +	else
> > +		echo 0
> > +	fi
> > +}
> > +
> > +_get_physical()
> > +{
> > +	# $1 is logical address
> > +	# print chunk tree and find devid 2 which is $SCRATCH_DEV
> > +	$BTRFS_UTIL_PROG inspect-internal dump-tree -t 3 $SCRATCH_DEV | grep $1 -A 6 | awk '($1 ~ /stripe/ && $3 ~ /devid/ && $4 ~ /1/) { print $6 }'
> > +}
> > +
> > +_scratch_dev_pool_get 2
> > +# step 1, create a raid1 btrfs which contains one 128k file.
> > +echo "step 1......mkfs.btrfs" >>$seqres.full
> > +
> > +mkfs_opts="-d raid1 -b 1G"
> > +_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1
> > +
> > +# -o nospace_cache makes sure data is written to the start position of the data
> > +# chunk
> > +_scratch_mount -o nospace_cache
> > +
> > +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" | _filter_xfs_io
> > +
> > +sync
> > +
> > +# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first
> > +# one in $SCRATCH_DEV_POOL
> > +echo "step 2......corrupt file extent" >>$seqres.full
> > +
> > +extents=`_check_file_extents $SCRATCH_MNT/foobar`
> > +logical_in_btrfs=`echo ${extents} | cut -d '#' -f 1`
> > +physical_on_scratch=`_get_physical ${logical_in_btrfs}`
> > +
> > +_scratch_unmount
> > +$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $physical_on_scratch 64K" $SCRATCH_DEV | _filter_xfs_io
> > +
> > +_scratch_mount
> > +
> > +# step 3, 128k dio read (this read can repair bad copy)
> > +echo "step 3......repair the bad copy" >>$seqres.full
> > +
> > +# since raid1 consists of two copies, and the following read may read the good
> > +# copy directly, so lets loop 10 times here and discard output that dio reads
> > +# give
> > +for i in `seq 1 10`; do
> > +	$XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null
> > +	repair=`_check_repair`
> > +	if [ $repair -eq 1 ]; then
> > +		break
> > +	fi
> > +done
> 
> But do we need really to stop at the first read csum failure, if 10
> times is enough to read from the bad copy? If there's no need to break
> out the loop, all the dmesg search work can be skipped too.
> 

The goal is to make sure that that read ends up with csum failure, so it seems
unnecessary to go on reading if csum failure has occurred.

The raid1 setup only consists of 2 data copy and it selects which data copy to
read by checking (current_pid % 2), it's still possible to read the same copy in
the loop but looping 10 times is likely to hit the bad data copy.  Anyway, I'm
open to any suggestion on this.

> The same comments apply to all other three patches.

Thanks for the comments, I'll update this series.

Thanks,

-liubo

> 
> Thanks,
> Eryu
> 
> > +
> > +_scratch_unmount
> > +
> > +# check if the repair works
> > +$XFS_IO_PROG -d -c "pread -v -b 512 $physical_on_scratch 512" $SCRATCH_DEV | _filter_xfs_io
> > +
> > +_scratch_dev_pool_put
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/btrfs/140.out b/tests/btrfs/140.out
> > new file mode 100644
> > index 0000000..c8565f5
> > --- /dev/null
> > +++ b/tests/btrfs/140.out
> > @@ -0,0 +1,39 @@
> > +QA output created by 140
> > +wrote 131072/131072 bytes at offset 0
> > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> > +wrote 65536/65536 bytes at offset 136708096
> > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> > +08260000:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260010:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260020:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260030:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260040:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260050:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260060:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260070:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260080:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260090:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082600a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082600b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082600c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082600d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082600e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082600f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260100:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260110:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260120:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260130:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260140:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260150:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260160:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260170:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260180:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +08260190:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082601a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082601b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082601c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082601d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082601e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +082601f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> > +read 512/512 bytes at offset 136708096
> > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> > diff --git a/tests/btrfs/group b/tests/btrfs/group
> > index 9d4b80b..1cb9c98 100644
> > --- a/tests/btrfs/group
> > +++ b/tests/btrfs/group
> > @@ -141,3 +141,4 @@
> >  137 auto quick send
> >  138 auto compress
> >  139 auto qgroup
> > +140 auto quick
> > -- 
> > 2.5.0
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe fstests" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Liu Bo May 9, 2017, 6:55 p.m. UTC | #5
On Mon, May 08, 2017 at 12:50:40PM -0700, Liu Bo wrote:
> On Wed, May 03, 2017 at 06:08:36PM +0800, Eryu Guan wrote:
> > On Fri, Apr 28, 2017 at 11:25:52AM -0600, Liu Bo wrote:
> > > This case tests whether dio read can repair the bad copy if we have
> > > a good copy.
> > > 
> > > Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> > > introduced the regression.
> > > 
> > > The upstream fix is
> > > 	Btrfs: fix invalid dereference in btrfs_retry_endio
> > > 
> > > Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
> > 
> > Sorry for the late review, and many thanks to Filipe's reviews! I agreed
> > with Filipe that the common helpers can be placed in common/btrfs and/or
> > common/rc files.
> > 
> > Some thoughts inline.
> > 
> > > ---
> > > v2: - Add regression commit and the fix to the description
> > >     - Use btrfs inspect-internal dump-tree to get rid of the dependence btrfs-map-logical
> > >     - Add comments in several places
> > > 
> > > v3: - Add 'mkfs -b 1G' to limit filesystem size to 2G in raid1 profile so that
> > >       we get a consistent output.
> > > 
> > >  tests/btrfs/140     | 167 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> > >  tests/btrfs/140.out |  39 ++++++++++++
> > >  tests/btrfs/group   |   1 +
> > >  3 files changed, 207 insertions(+)
> > >  create mode 100755 tests/btrfs/140
> > >  create mode 100644 tests/btrfs/140.out
> > > 
> > > diff --git a/tests/btrfs/140 b/tests/btrfs/140
> > > new file mode 100755
> > > index 0000000..dcd8807
> > > --- /dev/null
> > > +++ b/tests/btrfs/140
> > > @@ -0,0 +1,167 @@
> > > +#! /bin/bash
> > > +# FS QA Test 140
> > > +#
> > > +# Regression test for btrfs DIO read's repair during read.
> > > +#
> > > +# Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> > > +# introduced the regression.
> > > +# The upstream fix is
> > > +# 	Btrfs: fix invalid dereference in btrfs_retry_endio
> > > +#
> > > +#-----------------------------------------------------------------------
> > > +# Copyright (c) 2017 Liu Bo.  All Rights Reserved.
> > > +#
> > > +# This program is free software; you can redistribute it and/or
> > > +# modify it under the terms of the GNU General Public License as
> > > +# published by the Free Software Foundation.
> > > +#
> > > +# This program is distributed in the hope that it would be useful,
> > > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > > +# GNU General Public License for more details.
> > > +#
> > > +# You should have received a copy of the GNU General Public License
> > > +# along with this program; if not, write the Free Software Foundation,
> > > +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> > > +#-----------------------------------------------------------------------
> > > +#
> > > +
> > > +seq=`basename $0`
> > > +seqres=$RESULT_DIR/$seq
> > > +echo "QA output created by $seq"
> > > +
> > > +here=`pwd`
> > > +tmp=/tmp/$$
> > > +status=1	# failure is the default!
> > > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > > +
> > > +_cleanup()
> > > +{
> > > +	cd /
> > > +	rm -f $tmp.*
> > > +}
> > > +
> > > +# get standard environment, filters and checks
> > > +. ./common/rc
> > > +. ./common/filter
> > > +
> > > +# remove previous $seqres.full before test
> > > +rm -f $seqres.full
> > > +
> > > +# real QA test starts here
> > > +
> > > +# Modify as appropriate.
> > > +_supported_fs btrfs
> > > +_supported_os Linux
> > > +_require_scratch_dev_pool 2
> > > +
> > > +_require_btrfs_command inspect-internal dump-tree
> > > +_require_command "$FILEFRAG_PROG" filefrag
> > > +_require_odirect
> > > +
> > > +# helpe to convert 'file offset' to btrfs logical offset
> > > +FILEFRAG_FILTER='
> > > +	if (/blocks? of (\d+) bytes/) {
> > > +		$blocksize = $1;
> > > +		next
> > > +	}
> > > +	($ext, $logical, $physical, $length) =
> > > +		(/^\s*(\d+):\s+(\d+)..\s+\d+:\s+(\d+)..\s+\d+:\s+(\d+):/)
> > > +	or next;
> > > +	($flags) = /.*:\s*(\S*)$/;
> > > +	print $physical * $blocksize, "#",
> > > +	      $length * $blocksize, "#",
> > > +	      $logical * $blocksize, "#",
> > > +	      $flags, " "'
> >                       ^^^ "\n" so one extent per line?
> > 
> > This can be embedded in the filter function, like what _filter_mkfs
> > does.
> >
> 
> OK.
> 
> > > +
> > > +# this makes filefrag output script readable by using a perl helper.
> > > +# output is one extent per line, with three numbers separated by '#'
> > > +# the numbers are: physical, length, logical (all in bytes)
> > > +# sample output: "1234#10#5678" -> physical 1234, length 10, logical 5678
> > > +_filter_extents()
> > 
> > Global functions start with underscore, local functions don't.
> > 
> 
> OK.
> 
> > > +{
> > > +	tee -a $seqres.full | $PERL_PROG -ne "$FILEFRAG_FILTER"
> > 
> > I don't think this tee belongs here, see below.
> > 
> > > +}
> > > +
> > > +_check_file_extents()
> > > +{
> > > +	cmd="filefrag -v $1"
> > 
> > $FILEFRAG_PROG
> > 
> > > +	echo "# $cmd" >> $seqres.full
> > 
> > Just call filefrag -v again to dump the filefrag output to $seqres.full
> > 
> 
> Make sense.
> 
> > > +	out=`$cmd | _filter_extents`
> > > +	if [ -z "$out" ]; then
> > > +		return 1
> > > +	fi
> > > +	echo "after filter: $out" >> $seqres.full
> > > +	echo $out
> > > +	return 0
> > > +}
> > 
> > Hmm, seems that all you want from all these filters is the logical byte
> > of the first extent in the file. How about converting
> > _check_file_extents to _filter_filefrag and put it in common/filter?
> > And _get_physical can also be converted to _btrfs_get_physical and
> > placed in common/btrfs
> > e.g.
> > 
> > common/filter:
> > # <comments>
> > _filter_filefrag()
> > {
> > 	perl -ne '
> > 	<all the perl filter code here>
> > 	<like what _filter_mkfs does>
> > 	'
> > }
> > 
> > then
> > 
> > logical_in_btrfs=`$FILEFRAG -v $SCRATCH_MNT/foobar | _filter_filefrag | cut -d '#' -f 1`
> > physical_on_scratch=`_btrfs_get_physical $logical_in_btrfs`
> >
> 
> Sounds good.

_btrfs_get_physical in this testcase assumes that the test data has been written
to a fixed position (the start position of the only data chunk), so it's not for
generic use, I'd leave it for now instead of creating a new helper in
common/btrfs.  After we have stable btrfs-map-block output format, we can build
that helper on top of it.

Thanks,

liubo
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/tests/btrfs/140 b/tests/btrfs/140
new file mode 100755
index 0000000..dcd8807
--- /dev/null
+++ b/tests/btrfs/140
@@ -0,0 +1,167 @@ 
+#! /bin/bash
+# FS QA Test 140
+#
+# Regression test for btrfs DIO read's repair during read.
+#
+# Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
+# introduced the regression.
+# The upstream fix is
+# 	Btrfs: fix invalid dereference in btrfs_retry_endio
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2017 Liu Bo.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch_dev_pool 2
+
+_require_btrfs_command inspect-internal dump-tree
+_require_command "$FILEFRAG_PROG" filefrag
+_require_odirect
+
+# helpe to convert 'file offset' to btrfs logical offset
+FILEFRAG_FILTER='
+	if (/blocks? of (\d+) bytes/) {
+		$blocksize = $1;
+		next
+	}
+	($ext, $logical, $physical, $length) =
+		(/^\s*(\d+):\s+(\d+)..\s+\d+:\s+(\d+)..\s+\d+:\s+(\d+):/)
+	or next;
+	($flags) = /.*:\s*(\S*)$/;
+	print $physical * $blocksize, "#",
+	      $length * $blocksize, "#",
+	      $logical * $blocksize, "#",
+	      $flags, " "'
+
+# this makes filefrag output script readable by using a perl helper.
+# output is one extent per line, with three numbers separated by '#'
+# the numbers are: physical, length, logical (all in bytes)
+# sample output: "1234#10#5678" -> physical 1234, length 10, logical 5678
+_filter_extents()
+{
+	tee -a $seqres.full | $PERL_PROG -ne "$FILEFRAG_FILTER"
+}
+
+_check_file_extents()
+{
+	cmd="filefrag -v $1"
+	echo "# $cmd" >> $seqres.full
+	out=`$cmd | _filter_extents`
+	if [ -z "$out" ]; then
+		return 1
+	fi
+	echo "after filter: $out" >> $seqres.full
+	echo $out
+	return 0
+}
+
+_check_repair()
+{
+	filter=${1:-cat}
+	dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | tac | $filter | grep -q -e "csum failed"
+	if [ $? -eq 0 ]; then
+		echo 1
+	else
+		echo 0
+	fi
+}
+
+_get_physical()
+{
+	# $1 is logical address
+	# print chunk tree and find devid 2 which is $SCRATCH_DEV
+	$BTRFS_UTIL_PROG inspect-internal dump-tree -t 3 $SCRATCH_DEV | grep $1 -A 6 | awk '($1 ~ /stripe/ && $3 ~ /devid/ && $4 ~ /1/) { print $6 }'
+}
+
+_scratch_dev_pool_get 2
+# step 1, create a raid1 btrfs which contains one 128k file.
+echo "step 1......mkfs.btrfs" >>$seqres.full
+
+mkfs_opts="-d raid1 -b 1G"
+_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1
+
+# -o nospace_cache makes sure data is written to the start position of the data
+# chunk
+_scratch_mount -o nospace_cache
+
+$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" | _filter_xfs_io
+
+sync
+
+# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first
+# one in $SCRATCH_DEV_POOL
+echo "step 2......corrupt file extent" >>$seqres.full
+
+extents=`_check_file_extents $SCRATCH_MNT/foobar`
+logical_in_btrfs=`echo ${extents} | cut -d '#' -f 1`
+physical_on_scratch=`_get_physical ${logical_in_btrfs}`
+
+_scratch_unmount
+$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $physical_on_scratch 64K" $SCRATCH_DEV | _filter_xfs_io
+
+_scratch_mount
+
+# step 3, 128k dio read (this read can repair bad copy)
+echo "step 3......repair the bad copy" >>$seqres.full
+
+# since raid1 consists of two copies, and the following read may read the good
+# copy directly, so lets loop 10 times here and discard output that dio reads
+# give
+for i in `seq 1 10`; do
+	$XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null
+	repair=`_check_repair`
+	if [ $repair -eq 1 ]; then
+		break
+	fi
+done
+
+_scratch_unmount
+
+# check if the repair works
+$XFS_IO_PROG -d -c "pread -v -b 512 $physical_on_scratch 512" $SCRATCH_DEV | _filter_xfs_io
+
+_scratch_dev_pool_put
+# success, all done
+status=0
+exit
diff --git a/tests/btrfs/140.out b/tests/btrfs/140.out
new file mode 100644
index 0000000..c8565f5
--- /dev/null
+++ b/tests/btrfs/140.out
@@ -0,0 +1,39 @@ 
+QA output created by 140
+wrote 131072/131072 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 65536/65536 bytes at offset 136708096
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+08260000:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260010:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260020:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260030:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260040:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260050:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260060:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260070:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260080:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260090:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082600a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082600b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082600c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082600d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082600e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082600f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260100:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260110:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260120:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260130:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260140:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260150:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260160:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260170:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260180:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260190:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082601a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082601b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082601c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082601d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082601e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082601f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+read 512/512 bytes at offset 136708096
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
diff --git a/tests/btrfs/group b/tests/btrfs/group
index 9d4b80b..1cb9c98 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -141,3 +141,4 @@ 
 137 auto quick send
 138 auto compress
 139 auto qgroup
+140 auto quick