diff mbox

[v2] fstests: regression test for nocsum dio read's repair

Message ID 1493400370-6096-1-git-send-email-bo.li.liu@oracle.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Liu Bo April 28, 2017, 5:26 p.m. UTC
Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
introduced this regression.  It'd cause 'Segmentation fault' error.

The upstream fix is
	Btrfs: fix segment fault when doing dio read

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
---
v2: - Add 'mkfs -b 1G' to limit filesystem size to 2G in raid1 profile so that
      we get a consistent output.

 tests/btrfs/142     | 189 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/142.out |  39 +++++++++++
 tests/btrfs/group   |   1 +
 3 files changed, 229 insertions(+)
 create mode 100755 tests/btrfs/142
 create mode 100644 tests/btrfs/142.out

Comments

Filipe Manana May 2, 2017, 2:38 p.m. UTC | #1
On Fri, Apr 28, 2017 at 6:26 PM, Liu Bo <bo.li.liu@oracle.com> wrote:
> Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> introduced this regression.  It'd cause 'Segmentation fault' error.
>
> The upstream fix is
>         Btrfs: fix segment fault when doing dio read
>
> Signed-off-by: Liu Bo <bo.li.liu@oracle.com>

Reviewed-by: Filipe Manana <fdmanana@suse.com>

Just a comment below.

> ---
> v2: - Add 'mkfs -b 1G' to limit filesystem size to 2G in raid1 profile so that
>       we get a consistent output.
>
>  tests/btrfs/142     | 189 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/btrfs/142.out |  39 +++++++++++
>  tests/btrfs/group   |   1 +
>  3 files changed, 229 insertions(+)
>  create mode 100755 tests/btrfs/142
>  create mode 100644 tests/btrfs/142.out
>
> diff --git a/tests/btrfs/142 b/tests/btrfs/142
> new file mode 100755
> index 0000000..94566de
> --- /dev/null
> +++ b/tests/btrfs/142
> @@ -0,0 +1,189 @@
> +#! /bin/bash
> +# FS QA Test 142
> +#
> +# Regression test for btrfs DIO read's repair during read without checksum.
> +#
> +# Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> +# introduced this regression.  It'd cause 'Segmentation fault' error.
> +#
> +# The upstream fix is
> +#      Btrfs: fix segment fault when doing dio read
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2017 Liu Bo.  All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1       # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +       cd /
> +       rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch_dev_pool 2
> +
> +_require_btrfs_command inspect-internal dump-tree
> +_require_command "$FILEFRAG_PROG" filefrag
> +
> +# helpe to convert 'file offset' to btrfs logical offset
> +FILEFRAG_FILTER='
> +       if (/blocks? of (\d+) bytes/) {
> +               $blocksize = $1;
> +               next
> +       }
> +       ($ext, $logical, $physical, $length) =
> +               (/^\s*(\d+):\s+(\d+)..\s+\d+:\s+(\d+)..\s+\d+:\s+(\d+):/)
> +       or next;
> +       ($flags) = /.*:\s*(\S*)$/;
> +       print $physical * $blocksize, "#",
> +             $length * $blocksize, "#",
> +             $logical * $blocksize, "#",
> +             $flags, " "'
> +
> +# this makes filefrag output script readable by using a perl helper.
> +# output is one extent per line, with three numbers separated by '#'
> +# the numbers are: physical, length, logical (all in bytes)
> +# sample output: "1234#10#5678" -> physical 1234, length 10, logical 5678
> +_filter_extents()
> +{
> +       tee -a $seqres.full | $PERL_PROG -ne "$FILEFRAG_FILTER"
> +}
> +
> +_check_file_extents()
> +{
> +       cmd="filefrag -v $1"
> +       echo "# $cmd" >> $seqres.full
> +       out=`$cmd | _filter_extents`
> +       if [ -z "$out" ]; then
> +               return 1
> +       fi
> +       echo "after filter: $out" >> $seqres.full
> +       echo $out
> +       return 0
> +}
> +
> +_check_repair()
> +{
> +       filter=${1:-cat}
> +       dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | tac | $filter | grep -q -e "direct IO failed"
> +       if [ $? -eq 0 ]; then
> +               echo 1
> +       else
> +               echo 0
> +       fi
> +}
> +
> +_get_physical()
> +{
> +        # $1 is logical address
> +        # print chunk tree and find devid 2 which is $SCRATCH_DEV
> +        $BTRFS_UTIL_PROG inspect-internal dump-tree -t 3 $SCRATCH_DEV | grep $1 -A 6 | awk '($1 ~ /stripe/ && $3 ~ /devid/ && $4 ~ /1/) { print $6 }'
> +}
> +
> +
> +SYSFS_BDEV=`_sysfs_dev $SCRATCH_DEV`
> +
> +start_fail()
> +{
> +       echo 100 > $DEBUGFS_MNT/fail_make_request/probability
> +       echo 1 > $DEBUGFS_MNT/fail_make_request/times
> +       echo 0 > $DEBUGFS_MNT/fail_make_request/verbose
> +       echo 1 > $SYSFS_BDEV/make-it-fail
> +}
> +
> +stop_fail()
> +{
> +       echo 0 > $DEBUGFS_MNT/fail_make_request/probability
> +       echo 0 > $DEBUGFS_MNT/fail_make_request/times
> +       echo 0 > $SYSFS_BDEV/make-it-fail
> +}
> +
> +_scratch_dev_pool_get 2
> +# step 1, create a raid1 btrfs which contains one 128k file.
> +echo "step 1......mkfs.btrfs" >>$seqres.full
> +
> +mkfs_opts="-d raid1 -b 1G"
> +_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1
> +
> +# -o nospace_cache makes sure data is written to the start position of the data
> +# chunk
> +_scratch_mount -o nospace_cache,nodatasum
> +
> +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" | _filter_xfs_io
> +
> +sync

The sync is not necessary, since we cleanly unmount the fs below.

The test works now with a patched kernel and fails with an unpatched
kernel as expected.

Looks good to me, but FILEFRAG_FILTER, _filter_extents,
_check_file_extents, _get_physical and _check_repair are duplicated
across all the 4 test case files in the series. Could be factored into
common/btrfs later for example.

> +
> +# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first
> +# one in $SCRATCH_DEV_POOL
> +echo "step 2......corrupt file extent" >>$seqres.full
> +
> +extents=`_check_file_extents $SCRATCH_MNT/foobar`
> +logical_in_btrfs=`echo ${extents} | cut -d '#' -f 1`
> +physical_on_scratch=`_get_physical ${logical_in_btrfs}`
> +
> +_scratch_unmount
> +$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $physical_on_scratch 64K" $SCRATCH_DEV | _filter_xfs_io
> +
> +_scratch_mount -o nospace_cache,nodatasum
> +
> +# step 3, 128k dio read (this read can repair bad copy)
> +echo "step 3......repair the bad copy" >>$seqres.full
> +
> +# since raid1 consists of two copies, and the following read may read the good
> +# copy directly, so lets loop 10 times here and discard output that dio reads
> +# give
> +for i in `seq 1 10`; do
> +       # start_fail only fails the following dio read so the repair is
> +       # supposed to work.
> +       start_fail
> +       $XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null
> +       stop_fail
> +       repair=`_check_repair`
> +       if [ $repair -eq 1 ]; then
> +               break
> +       fi
> +done
> +
> +_scratch_unmount
> +
> +# check if the repair works
> +$XFS_IO_PROG -c "pread -v -b 512 $physical_on_scratch 512" $SCRATCH_DEV | _filter_xfs_io
> +
> +_scratch_dev_pool_put
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/btrfs/142.out b/tests/btrfs/142.out
> new file mode 100644
> index 0000000..d8be7fb
> --- /dev/null
> +++ b/tests/btrfs/142.out
> @@ -0,0 +1,39 @@
> +QA output created by 142
> +wrote 131072/131072 bytes at offset 0
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +wrote 65536/65536 bytes at offset 136708096
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +08260000:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260010:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260020:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260030:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260040:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260050:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260060:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260070:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260080:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260090:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082600f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260100:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260110:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260120:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260130:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260140:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260150:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260160:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260170:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260180:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +08260190:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +082601f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
> +read 512/512 bytes at offset 136708096
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index 7b380e5..a4f97cd 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -143,3 +143,4 @@
>  139 auto qgroup
>  140 auto quick
>  141 auto quick
> +142 auto quick
> --
> 2.5.0
>
diff mbox

Patch

diff --git a/tests/btrfs/142 b/tests/btrfs/142
new file mode 100755
index 0000000..94566de
--- /dev/null
+++ b/tests/btrfs/142
@@ -0,0 +1,189 @@ 
+#! /bin/bash
+# FS QA Test 142
+#
+# Regression test for btrfs DIO read's repair during read without checksum.
+#
+# Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
+# introduced this regression.  It'd cause 'Segmentation fault' error.
+#
+# The upstream fix is
+#	Btrfs: fix segment fault when doing dio read
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2017 Liu Bo.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch_dev_pool 2
+
+_require_btrfs_command inspect-internal dump-tree
+_require_command "$FILEFRAG_PROG" filefrag
+
+# helpe to convert 'file offset' to btrfs logical offset
+FILEFRAG_FILTER='
+	if (/blocks? of (\d+) bytes/) {
+		$blocksize = $1;
+		next
+	}
+	($ext, $logical, $physical, $length) =
+		(/^\s*(\d+):\s+(\d+)..\s+\d+:\s+(\d+)..\s+\d+:\s+(\d+):/)
+	or next;
+	($flags) = /.*:\s*(\S*)$/;
+	print $physical * $blocksize, "#",
+	      $length * $blocksize, "#",
+	      $logical * $blocksize, "#",
+	      $flags, " "'
+
+# this makes filefrag output script readable by using a perl helper.
+# output is one extent per line, with three numbers separated by '#'
+# the numbers are: physical, length, logical (all in bytes)
+# sample output: "1234#10#5678" -> physical 1234, length 10, logical 5678
+_filter_extents()
+{
+	tee -a $seqres.full | $PERL_PROG -ne "$FILEFRAG_FILTER"
+}
+
+_check_file_extents()
+{
+	cmd="filefrag -v $1"
+	echo "# $cmd" >> $seqres.full
+	out=`$cmd | _filter_extents`
+	if [ -z "$out" ]; then
+		return 1
+	fi
+	echo "after filter: $out" >> $seqres.full
+	echo $out
+	return 0
+}
+
+_check_repair()
+{
+	filter=${1:-cat}
+	dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | tac | $filter | grep -q -e "direct IO failed"
+	if [ $? -eq 0 ]; then
+		echo 1
+	else
+		echo 0
+	fi
+}
+
+_get_physical()
+{
+        # $1 is logical address
+        # print chunk tree and find devid 2 which is $SCRATCH_DEV
+        $BTRFS_UTIL_PROG inspect-internal dump-tree -t 3 $SCRATCH_DEV | grep $1 -A 6 | awk '($1 ~ /stripe/ && $3 ~ /devid/ && $4 ~ /1/) { print $6 }'
+}
+
+
+SYSFS_BDEV=`_sysfs_dev $SCRATCH_DEV`
+
+start_fail()
+{
+	echo 100 > $DEBUGFS_MNT/fail_make_request/probability
+	echo 1 > $DEBUGFS_MNT/fail_make_request/times
+	echo 0 > $DEBUGFS_MNT/fail_make_request/verbose
+	echo 1 > $SYSFS_BDEV/make-it-fail
+}
+
+stop_fail()
+{
+	echo 0 > $DEBUGFS_MNT/fail_make_request/probability
+	echo 0 > $DEBUGFS_MNT/fail_make_request/times
+	echo 0 > $SYSFS_BDEV/make-it-fail
+}
+
+_scratch_dev_pool_get 2
+# step 1, create a raid1 btrfs which contains one 128k file.
+echo "step 1......mkfs.btrfs" >>$seqres.full
+
+mkfs_opts="-d raid1 -b 1G"
+_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1
+
+# -o nospace_cache makes sure data is written to the start position of the data
+# chunk
+_scratch_mount -o nospace_cache,nodatasum
+
+$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" | _filter_xfs_io
+
+sync
+
+# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first
+# one in $SCRATCH_DEV_POOL
+echo "step 2......corrupt file extent" >>$seqres.full
+
+extents=`_check_file_extents $SCRATCH_MNT/foobar`
+logical_in_btrfs=`echo ${extents} | cut -d '#' -f 1`
+physical_on_scratch=`_get_physical ${logical_in_btrfs}`
+
+_scratch_unmount
+$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $physical_on_scratch 64K" $SCRATCH_DEV | _filter_xfs_io
+
+_scratch_mount -o nospace_cache,nodatasum
+
+# step 3, 128k dio read (this read can repair bad copy)
+echo "step 3......repair the bad copy" >>$seqres.full
+
+# since raid1 consists of two copies, and the following read may read the good
+# copy directly, so lets loop 10 times here and discard output that dio reads
+# give
+for i in `seq 1 10`; do
+	# start_fail only fails the following dio read so the repair is
+	# supposed to work.
+	start_fail
+	$XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null
+	stop_fail
+	repair=`_check_repair`
+	if [ $repair -eq 1 ]; then
+		break
+	fi
+done
+
+_scratch_unmount
+
+# check if the repair works
+$XFS_IO_PROG -c "pread -v -b 512 $physical_on_scratch 512" $SCRATCH_DEV | _filter_xfs_io
+
+_scratch_dev_pool_put
+# success, all done
+status=0
+exit
diff --git a/tests/btrfs/142.out b/tests/btrfs/142.out
new file mode 100644
index 0000000..d8be7fb
--- /dev/null
+++ b/tests/btrfs/142.out
@@ -0,0 +1,39 @@ 
+QA output created by 142
+wrote 131072/131072 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 65536/65536 bytes at offset 136708096
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+08260000:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260010:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260020:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260030:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260040:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260050:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260060:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260070:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260080:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260090:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082600a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082600b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082600c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082600d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082600e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082600f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260100:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260110:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260120:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260130:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260140:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260150:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260160:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260170:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260180:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+08260190:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082601a0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082601b0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082601c0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082601d0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082601e0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+082601f0:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
+read 512/512 bytes at offset 136708096
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
diff --git a/tests/btrfs/group b/tests/btrfs/group
index 7b380e5..a4f97cd 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -143,3 +143,4 @@ 
 139 auto qgroup
 140 auto quick
 141 auto quick
+142 auto quick