diff mbox

[V3,1/2] mfd: Add ROHM BD9571MWV-M PMIC DT bindings

Message ID 20170502121816.10572-1-marek.vasut+renesas@gmail.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show

Commit Message

Marek Vasut May 2, 2017, 12:18 p.m. UTC
Add DT bindings for the ROHM BD9571MWV-M PMIC. This PMIC has
the following features:
- multiple voltage monitors for 1V8, 2V5, 3V3 voltage rail
- one voltage regulator for DVFS
- two GPIOs

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: linux-renesas-soc@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
---
V2: - Drop the compatible = "regulator-fixed" from the binding example,
      it should not be there.
    - List the VD09 regulator
V3: Replace bd9571@30 with pmic@30
---
 .../devicetree/bindings/mfd/bd9571mwv.txt          | 49 ++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/bd9571mwv.txt

Comments

Lee Jones Aug. 15, 2017, 2:38 p.m. UTC | #1
On Tue, 02 May 2017, Marek Vasut wrote:

> Add DT bindings for the ROHM BD9571MWV-M PMIC. This PMIC has
> the following features:
> - multiple voltage monitors for 1V8, 2V5, 3V3 voltage rail
> - one voltage regulator for DVFS
> - two GPIOs
> 
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> Cc: devicetree@vger.kernel.org
> Cc: Rob Herring <robh@kernel.org>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: linux-renesas-soc@vger.kernel.org
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> V2: - Drop the compatible = "regulator-fixed" from the binding example,
>       it should not be there.
>     - List the VD09 regulator
> V3: Replace bd9571@30 with pmic@30
> ---
>  .../devicetree/bindings/mfd/bd9571mwv.txt          | 49 ++++++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/bd9571mwv.txt

Applied, thanks.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
new file mode 100644
index 000000000000..9ab216a851d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
@@ -0,0 +1,49 @@ 
+* ROHM BD9571MWV Power Management Integrated Circuit (PMIC) bindings
+
+Required properties:
+ - compatible		: Should be "rohm,bd9571mwv".
+ - reg			: I2C slave address.
+ - interrupt-parent	: Phandle to the parent interrupt controller.
+ - interrupts		: The interrupt line the device is connected to.
+ - interrupt-controller	: Marks the device node as an interrupt controller.
+ - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
+			    The first cell is the IRQ number.
+			    The second cell is the flags, encoded as trigger
+			    masks from ../interrupt-controller/interrupts.txt.
+ - gpio-controller      : Marks the device node as a GPIO Controller.
+ - #gpio-cells          : Should be two.  The first cell is the pin number and
+                            the second cell is used to specify flags.
+                            See ../gpio/gpio.txt for more information.
+ - regulators:          : List of child nodes that specify the regulator
+                            initialization data. Child nodes must be named
+                            after their hardware counterparts:
+			     - vd09
+			     - vd18
+			     - vd25
+			     - vd33
+			     - dvfs
+			    Each child node is defined using the standard
+			    binding for regulators.
+
+Example:
+
+	pmic: pmic@30 {
+		compatible = "rohm,bd9571mwv";
+		reg = <0x30>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		regulators {
+			dvfs: dvfs {
+				regulator-name = "dvfs";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1030000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};