[4/4DONOTMERGE] ARM: sun8i: bananapi-m3: Enable dwmac-sun8i
diff mbox

Message ID 20170602091126.14476-4-clabbe.montjoie@gmail.com
State New, archived
Headers show

Commit Message

Corentin Labbe June 2, 2017, 9:11 a.m. UTC
The dwmac-sun8i hardware is present on the bananapi m3
It uses an external PHY rtl8211e via RGMII.

This patch create the needed emac and phy nodes.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

Patch
diff mbox

diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index bb23904847d5..dcb4fa7e6eff 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -67,6 +67,23 @@ 
 	};
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	allwinner,rx-delay-ps = <700>;
+	allwinner,tx-delay-ps = <700>;
+
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;