Patchwork HID: Add driver for Retrode2 joypad adapter

login
register
mail settings
Submitter Bastien Nocera
Date June 7, 2017, 2:15 p.m.
Message ID <1496844937.11482.3.camel@hadess.net>
Download mbox | patch
Permalink /patch/9771607/
State New
Headers show

Comments

Bastien Nocera - June 7, 2017, 2:15 p.m.
This driver does 2 things:
 - Apply the MULTI_INPUT quirk to create separate joypad device nodes
   for each one of the 4 connectors.
 - Rename the input devices so that their names are different, and allow
   users to recognise which device corresponds to which physical port,
   including the SNES (Mario Paint) Mouse.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
---
 drivers/hid/Kconfig       |   8 ++++
 drivers/hid/Makefile      |   1 +
 drivers/hid/hid-ids.h     |   3 ++
 drivers/hid/hid-retrode.c | 105 ++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 117 insertions(+)
 create mode 100644 drivers/hid/hid-retrode.c

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Benjamin Tissoires - June 7, 2017, 2:28 p.m.
On Jun 07 2017 or thereabouts, Bastien Nocera wrote:
> This driver does 2 things:
>  - Apply the MULTI_INPUT quirk to create separate joypad device nodes
>    for each one of the 4 connectors.
>  - Rename the input devices so that their names are different, and allow
>    users to recognise which device corresponds to which physical port,
>    including the SNES (Mario Paint) Mouse.

Few nitpicks I didn't spot earlier (privately):

> 
> Signed-off-by: Bastien Nocera <hadess@hadess.net>
> ---
>  drivers/hid/Kconfig       |   8 ++++
>  drivers/hid/Makefile      |   1 +
>  drivers/hid/hid-ids.h     |   3 ++
>  drivers/hid/hid-retrode.c | 105 ++++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 117 insertions(+)
>  create mode 100644 drivers/hid/hid-retrode.c
> 
> diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
> index 687705c50794..d409435fc0c2 100644
> --- a/drivers/hid/Kconfig
> +++ b/drivers/hid/Kconfig
> @@ -741,6 +741,14 @@ config HID_PRIMAX
>  	Support for Primax devices that are not fully compliant with the
>  	HID standard.
>  
> +config HID_RETRODE
> +	tristate "Retrode"
> +	depends on USB_HID
> +	---help---
> +	Support for
> +
> +	  * Retrode 2 cartridge and controller adapter
> +
>  config HID_ROCCAT
>  	tristate "Roccat device support"
>  	depends on USB_HID
> diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
> index fef027bc7fa3..9ac08e7ed887 100644
> --- a/drivers/hid/Makefile
> +++ b/drivers/hid/Makefile
> @@ -81,6 +81,7 @@ hid-picolcd-$(CONFIG_DEBUG_FS)		+= hid-picolcd_debugfs.o
>  
>  obj-$(CONFIG_HID_PLANTRONICS)	+= hid-plantronics.o
>  obj-$(CONFIG_HID_PRIMAX)	+= hid-primax.o
> +obj-$(CONFIG_HID_RETRODE)	+= hid-retrode.o
>  obj-$(CONFIG_HID_ROCCAT)	+= hid-roccat.o hid-roccat-common.o \
>  	hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \
>  	hid-roccat-koneplus.o hid-roccat-konepure.o hid-roccat-kovaplus.o \
> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> index 8ca1e8ce0af2..eabf33199fb2 100644
> --- a/drivers/hid/hid-ids.h
> +++ b/drivers/hid/hid-ids.h
> @@ -383,6 +383,9 @@
>  #define USB_VENDOR_ID_FUTABA            0x0547
>  #define USB_DEVICE_ID_LED_DISPLAY       0x7000
>  
> +#define USB_VENDOR_ID_FUTURE_TECHNOLOGY	0x0403
> +#define USB_DEVICE_ID_RETRODE2		0x97c1
> +
>  #define USB_VENDOR_ID_ESSENTIAL_REALITY	0x0d7f
>  #define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
>  
> diff --git a/drivers/hid/hid-retrode.c b/drivers/hid/hid-retrode.c
> new file mode 100644
> index 000000000000..2bcc507a1f2c
> --- /dev/null
> +++ b/drivers/hid/hid-retrode.c
> @@ -0,0 +1,105 @@
> +/*
> + *  HID driver for Retrode 2 controller adapter and plug-in extensions
> + *
> + *  Copyright (c) 2017 Bastien Nocera <hadess@hadess.net>
> + */
> +
> +/*
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the Free
> + * Software Foundation; either version 2 of the License, or (at your option)
> + * any later version.
> + */
> +
> +#include <linux/input.h>
> +#include <linux/slab.h>
> +#include <linux/hid.h>
> +#include <linux/module.h>
> +#include "hid-ids.h"
> +
> +#define CONTROLLER_NAME_BASE "Retrode"
> +
> +static int retrode_input_configured(struct hid_device *hdev,
> +					struct hid_input *hi)
> +{
> +	struct hid_field *field = hi->report->field[0];
> +	const char *suffix;
> +	int number = 0;
> +	unsigned int len;
> +	char *name;
> +
> +	switch (field->report->id) {
> +	case 0:
> +		suffix = "SNES Mouse";
> +		break;
> +	case 1:
> +	case 2:
> +		suffix = "SNES";
> +		number = field->report->id;
> +		break;
> +	case 3:
> +	case 4:
> +		suffix = "Mega Drive";
> +		number = field->report->id - 2;
> +		break;
> +	default:
> +		hid_err(hdev, "Got unhandled report id %d\n", field->report->id);
> +		suffix = "Unknown";
> +	}
> +
> +	len = strlen(CONTROLLER_NAME_BASE) + strlen(suffix) +
> +			number ? 5 : 2;
> +	name = devm_kzalloc(&hi->input->dev, len, GFP_KERNEL);
> +	if (name) {
> +		if (number)
> +			sprintf(name, "%s %s #%d", CONTROLLER_NAME_BASE,
> +				suffix, number);
> +		else
> +			sprintf(name, "%s %s", CONTROLLER_NAME_BASE,
> +				suffix);
> +		hi->input->name = name;
> +	}
> +
> +	return 0;
> +}
> +
> +static int retrode_probe(struct hid_device *hdev,
> +			const struct hid_device_id *id)
> +{
> +
> +	int ret;
> +
> +	/* Has no effect on the mouse device */
> +	hdev->quirks |= HID_QUIRK_MULTI_INPUT;
> +
> +	ret = hid_parse(hdev);
> +	if (ret) {
> +		hid_err(hdev, "parse failed\n");

This error message is probably too much, just return in case of failure,
we will get an error if something wrong happens.

> +		return ret;
> +	}
> +
> +	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
> +	if (ret) {
> +		hid_err(hdev, "hw start failed\n");

Same here.

> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct hid_device_id retrode_devices[] = {
> +	{ HID_USB_DEVICE(USB_VENDOR_ID_FUTURE_TECHNOLOGY, USB_DEVICE_ID_RETRODE2) },

Aren't you missing the same entry in hid-core.c hid_have_special_driver?

Cheers,
Benjamin

> +	{ }
> +};
> +MODULE_DEVICE_TABLE(hid, retrode_devices);
> +
> +static struct hid_driver retrode_driver = {
> +	.name             = "hid-retrode",
> +	.id_table         = retrode_devices,
> +	.input_configured = retrode_input_configured,
> +	.probe            = retrode_probe,
> +};
> +
> +module_hid_driver(retrode_driver);
> +
> +MODULE_LICENSE("GPL");
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bastien Nocera - June 7, 2017, 3:42 p.m.
On Wed, 2017-06-07 at 16:28 +0200, Benjamin Tissoires wrote:
> On Jun 07 2017 or thereabouts, Bastien Nocera wrote:
<snip>
> > +		hid_err(hdev, "parse failed\n");
> 
> This error message is probably too much, just return in case of
> failure,
> we will get an error if something wrong happens.
> 
> > +		return ret;
> > +	}
> > +
> > +	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
> > +	if (ret) {
> > +		hid_err(hdev, "hw start failed\n");
> 
> Same here.

Both fixed.

> > +static const struct hid_device_id retrode_devices[] = {
> > +	{ HID_USB_DEVICE(USB_VENDOR_ID_FUTURE_TECHNOLOGY,
> > USB_DEVICE_ID_RETRODE2) },
> 
> Aren't you missing the same entry in hid-core.c
> hid_have_special_driver?

I guess I am, fixed.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 687705c50794..d409435fc0c2 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -741,6 +741,14 @@  config HID_PRIMAX
 	Support for Primax devices that are not fully compliant with the
 	HID standard.
 
+config HID_RETRODE
+	tristate "Retrode"
+	depends on USB_HID
+	---help---
+	Support for
+
+	  * Retrode 2 cartridge and controller adapter
+
 config HID_ROCCAT
 	tristate "Roccat device support"
 	depends on USB_HID
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index fef027bc7fa3..9ac08e7ed887 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -81,6 +81,7 @@  hid-picolcd-$(CONFIG_DEBUG_FS)		+= hid-picolcd_debugfs.o
 
 obj-$(CONFIG_HID_PLANTRONICS)	+= hid-plantronics.o
 obj-$(CONFIG_HID_PRIMAX)	+= hid-primax.o
+obj-$(CONFIG_HID_RETRODE)	+= hid-retrode.o
 obj-$(CONFIG_HID_ROCCAT)	+= hid-roccat.o hid-roccat-common.o \
 	hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \
 	hid-roccat-koneplus.o hid-roccat-konepure.o hid-roccat-kovaplus.o \
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 8ca1e8ce0af2..eabf33199fb2 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -383,6 +383,9 @@ 
 #define USB_VENDOR_ID_FUTABA            0x0547
 #define USB_DEVICE_ID_LED_DISPLAY       0x7000
 
+#define USB_VENDOR_ID_FUTURE_TECHNOLOGY	0x0403
+#define USB_DEVICE_ID_RETRODE2		0x97c1
+
 #define USB_VENDOR_ID_ESSENTIAL_REALITY	0x0d7f
 #define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
 
diff --git a/drivers/hid/hid-retrode.c b/drivers/hid/hid-retrode.c
new file mode 100644
index 000000000000..2bcc507a1f2c
--- /dev/null
+++ b/drivers/hid/hid-retrode.c
@@ -0,0 +1,105 @@ 
+/*
+ *  HID driver for Retrode 2 controller adapter and plug-in extensions
+ *
+ *  Copyright (c) 2017 Bastien Nocera <hadess@hadess.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include "hid-ids.h"
+
+#define CONTROLLER_NAME_BASE "Retrode"
+
+static int retrode_input_configured(struct hid_device *hdev,
+					struct hid_input *hi)
+{
+	struct hid_field *field = hi->report->field[0];
+	const char *suffix;
+	int number = 0;
+	unsigned int len;
+	char *name;
+
+	switch (field->report->id) {
+	case 0:
+		suffix = "SNES Mouse";
+		break;
+	case 1:
+	case 2:
+		suffix = "SNES";
+		number = field->report->id;
+		break;
+	case 3:
+	case 4:
+		suffix = "Mega Drive";
+		number = field->report->id - 2;
+		break;
+	default:
+		hid_err(hdev, "Got unhandled report id %d\n", field->report->id);
+		suffix = "Unknown";
+	}
+
+	len = strlen(CONTROLLER_NAME_BASE) + strlen(suffix) +
+			number ? 5 : 2;
+	name = devm_kzalloc(&hi->input->dev, len, GFP_KERNEL);
+	if (name) {
+		if (number)
+			sprintf(name, "%s %s #%d", CONTROLLER_NAME_BASE,
+				suffix, number);
+		else
+			sprintf(name, "%s %s", CONTROLLER_NAME_BASE,
+				suffix);
+		hi->input->name = name;
+	}
+
+	return 0;
+}
+
+static int retrode_probe(struct hid_device *hdev,
+			const struct hid_device_id *id)
+{
+
+	int ret;
+
+	/* Has no effect on the mouse device */
+	hdev->quirks |= HID_QUIRK_MULTI_INPUT;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		return ret;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct hid_device_id retrode_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_FUTURE_TECHNOLOGY, USB_DEVICE_ID_RETRODE2) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, retrode_devices);
+
+static struct hid_driver retrode_driver = {
+	.name             = "hid-retrode",
+	.id_table         = retrode_devices,
+	.input_configured = retrode_input_configured,
+	.probe            = retrode_probe,
+};
+
+module_hid_driver(retrode_driver);
+
+MODULE_LICENSE("GPL");