diff mbox

[v3,07/10] ARM: mxs: add sgtl5000 i2c device

Message ID 1310731780-1645-8-git-send-email-b29396@freescale.com (mailing list archive)
State New, archived
Headers show

Commit Message

Aisheng Dong July 15, 2011, 12:09 p.m. UTC
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mxs/Kconfig        |    1 +
 arch/arm/mach-mxs/mach-mx28evk.c |   17 +++++++++++++++++
 2 files changed, 18 insertions(+), 0 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 405c28d..2de2ea1 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -49,6 +49,7 @@  config MACH_MX28EVK
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
 	select MXS_HAVE_PLATFORM_MXS_SAIF
+	select MXS_HAVE_PLATFORM_MXS_I2C
 	select MXS_OCOTP
 	help
 	  Include support for MX28EVK platform. This includes specific
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 7837a87..491cf0d 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -18,6 +18,7 @@ 
 #include <linux/leds.h>
 #include <linux/irq.h>
 #include <linux/clk.h>
+#include <linux/i2c.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -186,6 +187,12 @@  static const iomux_cfg_t mx28evk_pads[] __initconst = {
 	/* led */
 	MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
 
+	/* I2C */
+	MX28_PAD_I2C0_SCL__I2C0_SCL |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_I2C0_SDA__I2C0_SDA |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+
 	/* saif0 & saif1 */
 	MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
 		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
@@ -366,6 +373,12 @@  static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
 	},
 };
 
+static struct i2c_board_info mxs_i2c0_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("sgtl5000", 0x0a),
+	},
+};
+
 static void __init mx28evk_init(void)
 {
 	int ret;
@@ -409,6 +422,10 @@  static void __init mx28evk_init(void)
 	mx28_add_saif(0);
 	mx28_add_saif(1);
 
+	mx28_add_mxs_i2c(0);
+	i2c_register_board_info(0, mxs_i2c0_board_info,
+				ARRAY_SIZE(mxs_i2c0_board_info));
+
 	/*set the saif clk mux, both saif0/saif1 use saif0 clk*/
 	__raw_writel(0x2 << 10, DIGCTRL_BASE_ADDR);