diff mbox

[v4,2/2] mmc: sdhci-acpi: Add DMI based blacklist

Message ID c9b4cc92-a30b-670b-339d-d6c30b0b104f@intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Adrian Hunter June 19, 2017, 11:59 a.m. UTC
On 16/06/17 17:37, Hans de Goede wrote:
> Hi,
> 
> On 16-06-17 14:34, Adrian Hunter wrote:
>> On 16/06/17 15:33, Hans de Goede wrote:
>>> Hi,
>>>
>>> On 14-06-17 15:20, Hans de Goede wrote:
>>>> Hi,
>>>>
>>>> On 14-06-17 09:43, Adrian Hunter wrote:
>>>>> On 12/06/17 16:27, Hans de Goede wrote:
>>>>>> Hi,
>>>>>>
>>>>>> On 12-06-17 14:11, Adrian Hunter wrote:
>>>>>>> On 08/06/17 21:55, Hans de Goede wrote:
>>>>>>>> Add a DMI based blacklist for systems where probing some sdio
>>>>>>>> interfaces
>>>>>>>> is harmful (e.g. causes pci-e based wifi to not work).
>>>>>>>>
>>>>>>>> BugLink: https://bbs.archlinux.org/viewtopic.php?id=224086
>>>>>>>> Fixes: db52d4f8a4bd ("mmc: sdhci-acpi: support 80860F14 UID 2 SDIO
>>>>>>>> bus")
>>>>>>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>>>>>>>> ---
>>>>>>>> Changes in v2:
>>>>>>>> -Adjust for changes in mmc: sdhci-acpi: Add fix_up_power_blacklist
>>>>>>>> module
>>>>>>>> option
>>>>>>>> -Only use a single fix_up_power_dmi_blacklist for the GPDwin further
>>>>>>>> testing
>>>>>>>>     has shown that the DMI strings are unique enough that we do not
>>>>>>>> need the
>>>>>>>>     bios-date in there
>>>>>>>>
>>>>>>>> Changes in v3:
>>>>>>>> -Adjust for changes to "mmc: sdhci-acpi: Add blacklist module option"
>>>>>>>>
>>>>>>>> Changes in v4:
>>>>>>>> -Rename blacklist to dmi_probe_blacklist as it now blacklists probing,
>>>>>>>>     rather then calling acpi_device_fix_up_power.
>>>>>>>> -Also check bios-date against known bios-dates for the GPD win, to
>>>>>>>> avoid
>>>>>>>>     possible false positives due to the use of quite generic DMI
>>>>>>>> strings
>>>>>>>> -Add Fixes and BugLink tags
>>>>>>>> ---
>>>>>>>>     drivers/mmc/host/sdhci-acpi.c | 64
>>>>>>>> +++++++++++++++++++++++++++++++++++++++++++
>>>>>>>>     1 file changed, 64 insertions(+)
>>>>>>>>
>>>>>>>> diff --git a/drivers/mmc/host/sdhci-acpi.c
>>>>>>>> b/drivers/mmc/host/sdhci-acpi.c
>>>>>>>> index ecc3aefd4643..3e12a6a8ad99 100644
>>>>>>>> --- a/drivers/mmc/host/sdhci-acpi.c
>>>>>>>> +++ b/drivers/mmc/host/sdhci-acpi.c
>>>>>>>> @@ -36,6 +36,7 @@
>>>>>>>>     #include <linux/pm.h>
>>>>>>>>     #include <linux/pm_runtime.h>
>>>>>>>>     #include <linux/delay.h>
>>>>>>>> +#include <linux/dmi.h>
>>>>>>>>       #include <linux/mmc/host.h>
>>>>>>>>     #include <linux/mmc/pm.h>
>>>>>>>> @@ -83,6 +84,11 @@ struct sdhci_acpi_host {
>>>>>>>>         bool                use_runtime_pm;
>>>>>>>>     };
>>>>>>>>     +struct dmi_probe_blacklist_data {
>>>>>>>> +    const char *hid_uid;
>>>>>>>> +    const char * const *bios_dates;
>>>>>>>> +};
>>>>>>>> +
>>>>>>>>     static char *blacklist;
>>>>>>>>       static bool sdhci_acpi_compare_hid_uid(const char *match,
>>>>>>>> const char
>>>>>>>> *hid,
>>>>>>>> @@ -116,6 +122,34 @@ static bool sdhci_acpi_compare_hid_uid(const char
>>>>>>>> *match, const char *hid,
>>>>>>>>         return false;
>>>>>>>>     }
>>>>>>>>     +static const char *sdhci_acpi_get_dmi_blacklist(const struct
>>>>>>>> dmi_system_id *bl)
>>>>>>>> +{
>>>>>>>> +    const struct dmi_system_id *dmi_id;
>>>>>>>> +    const struct dmi_probe_blacklist_data *bl_data;
>>>>>>>> +    const char *bios_date;
>>>>>>>> +    int i;
>>>>>>>> +
>>>>>>>> +    dmi_id = dmi_first_match(bl);
>>>>>>>> +    if (!dmi_id)
>>>>>>>> +        return NULL;
>>>>>>>> +
>>>>>>>> +    bl_data = dmi_id->driver_data;
>>>>>>>> +
>>>>>>>> +    if (!bl_data->bios_dates)
>>>>>>>> +        return bl_data->hid_uid;
>>>>>>>> +
>>>>>>>> +    bios_date = dmi_get_system_info(DMI_BIOS_DATE);
>>>>>>>> +    if (!bios_date)
>>>>>>>> +        return NULL;
>>>>>>>> +
>>>>>>>> +    for (i = 0; bl_data->bios_dates[i]; i++) {
>>>>>>>> +        if (strcmp(bl_data->bios_dates[i], bios_date) == 0)
>>>>>>>> +            return bl_data->hid_uid;
>>>>>>>> +    }
>>>>>>>> +
>>>>>>>> +    return NULL;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>>     static inline bool sdhci_acpi_flag(struct sdhci_acpi_host *c,
>>>>>>>> unsigned
>>>>>>>> int flag)
>>>>>>>>     {
>>>>>>>>         return c->slot && (c->slot->flags & flag);
>>>>>>>> @@ -391,6 +425,33 @@ static const struct acpi_device_id
>>>>>>>> sdhci_acpi_ids[] = {
>>>>>>>>     };
>>>>>>>>     MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids);
>>>>>>>>     +const struct dmi_probe_blacklist_data gpd_win_bl_data = {
>>>>>>>> +    .hid_uid = "80860F14:2",
>>>>>>>> +    .bios_dates = (const char * const []){
>>>>>>>> +        "10/25/2016", "11/18/2016", "02/21/2017", NULL },
>>>>>>>> +};
>>>>>>>> +
>>>>>>>> +static const struct dmi_system_id dmi_probe_blacklist[] = {
>>>>>>>> +    {
>>>>>>>> +        /*
>>>>>>>> +         * Match for the GPDwin which unfortunately uses somewhat
>>>>>>>> +         * generic dmi strings, which is why we test for 4 strings
>>>>>>>> +         * and a known BIOS date.
>>>>>>>> +         * Comparing against 29 other byt/cht boards, board_name is
>>>>>>>> +         * unique to the GPDwin, where as only 2 other boards have the
>>>>>>>> +         * same board_serial and 3 others have the same board_vendor
>>>>>>>> +         */
>>>>>>>> +        .driver_data = (void *)&gpd_win_bl_data,
>>>>>>>> +        .matches = {
>>>>>>>> +            DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
>>>>>>>> +            DMI_MATCH(DMI_BOARD_NAME, "Default string"),
>>>>>>>> +            DMI_MATCH(DMI_BOARD_SERIAL, "Default string"),
>>>>>>>> +            DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
>>>>>>>> +        },
>>>>>>>
>>>>>>> To me this is matching by accident rather than by design, which is not
>>>>>>> acceptable.
>>>>>>
>>>>>> I already explained why we need this dmi quirk in your reply of v3,
>>>>>> it would have been nice if you replied there.
>>>>>
>>>>> I understand what you are saying, but that doesn't make the patch
>>>>> acceptable, so I cannot Ack it.
>>>>>
>>>>>>
>>>>>> As I already mentioned when I first submitted this patch-set this
>>>>>> patch-set fixes a regression. When I first installed Linux on this
>>>>>> system, the wifi just worked, until this commit got merged:
>>>>>>
>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=db52d4f8a4bde36263a7cc9d46ff20b243562ac9
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> So that gives us 3 options:
>>>>>
>>>>> In the absence of another solution, the options are:
>>>>>      1. get the BIOS fixed
>>>>
>>>> a. That is not going to happen (I've already contacted the vendor).
>>>> b. Even if that were to happen, almost no-one will update the BIOS, so
>>>>      this does not help
>>>>
>>>>>      2. use the module option to blacklist the bad device
>>>>
>>>> Needing to use a module-option, where before none was necessary
>>>> is still a regression. I've personally had a commit of mine
>>>> reverted by Torvalds himself because I changed something which
>>>> would require the use a of a kernel cmdline option in certain
>>>> corner-cases where no cmdline option was needed before.
>>>>
>>>> Basically your solutions boil down to my:
>>>>
>>>>>> 2) Do nothing, live with the regression.
>>>>
>>>>>> 2. is what you seem to be advocating, but since the kernel has a clear
>>>>>> no regressions policy that is not an option either
>>>>
>>>> So your advocating we just live with the REGRESSION, because that
>>>> is what this is a REGRESSION and nothing else. That is simply
>>>> not acceptable (and clearly against kernel policy).
>>>>
>>>> I've compared DMI data to 29 other boards using the same chipset
>>>> to prove the DMI match is unique, then since you are still worried
>>>> about the match being too generic I also added BIOS date checking,
>>>> which certainly makes the match more then unique enough, something to
>>>> which you've not even responded...
>>>>
>>>> In the mean time users have been suffering from this regression
>>>> for 3 months now:
>>>> https://bbs.archlinux.org/viewtopic.php?id=224086
>>>>
>>>> I've no words for this, other then that your blocking of fixing
>>>> this REGRESSION, without you even addressing my factual arguments
>>>> why this match is not too generic, vs you're feeling that it is
>>>> too generic, simply is unacceptable.
>>>
>>> To be clear, I understand that needing DMI quirks in the first place
>>> is undesirable, and that this vendor using way too generic strings
>>> is adding extra ugliness to the ugliness of needing DMI quirks in
>>> the first place, so I understand your reluctance here.
>>>
>>> But to me making this "just" work for users trumps my desire to
>>> avoid ugliness like this. I really want to see Linux used by as much
>>> users as possible and in order for that to happen we need to have
>>> Ubunutu / Fedora just work with their hardware, if users first need
>>> to google a kernel cmdline option, then they will just stop using
>>> Linux.
>>
>> Perhaps there is something else we can match on, like the presence of the
>> PCIe wifi device since we only use SDIO for wifi.  Can you send a copy of
>> the ACPI DSDT table, or an acpidump file.  Also lspci output.
> 
> Full acpidump is here:
> 
> https://fedorapeople.org/~jwrdegoede/GPDwin.acpidump.20161025
> 
> dsdt.dsl:
> 
> https://fedorapeople.org/~jwrdegoede/GPD-win/dsdt.dsl.orig
> 
> lspci -nn:
> 
> 00:00.0 Host bridge [0600]: Intel Corporation Atom/Celeron/Pentium Processor
> x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [8086:2280] (rev 20)
> 00:02.0 VGA compatible controller [0300]: Intel Corporation
> Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration
> Registers [8086:22b0] (rev 20)
> 00:0b.0 Signal processing controller [1180]: Intel Corporation
> Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management
> Controller [8086:22dc] (rev 20)
> 00:14.0 USB controller [0c03]: Intel Corporation Atom/Celeron/Pentium
> Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [8086:22b5] (rev 20)
> 00:16.0 USB controller [0c03]: Intel Corporation Device [8086:22b7] (rev 20)
> 00:1a.0 Encryption controller [1080]: Intel Corporation Atom/Celeron/Pentium
> Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine [8086:2298]
> (rev 20)
> 00:1c.0 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor
> x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 [8086:22c8] (rev 20)
> 00:1f.0 ISA bridge [0601]: Intel Corporation Atom/Celeron/Pentium Processor
> x5-E8000/J3xxx/N3xxx Series PCU [8086:229c] (rev 20)
> 01:00.0 Network controller [0280]: Broadcom Limited BCM4356 802.11ac
> Wireless Network Adapter [14e4:43ec] (rev 02)
> 
> Note that one of the issues with matching on something else
> is probe ordering, so matching on say a pci device is tricky,
> what if the pci-bus is not yet (fully) enumerated ?

The PCI bus is first enumerated when the subsystems are initialized
which is before driver initialization.

Does this work?

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Hans de Goede June 19, 2017, 2:07 p.m. UTC | #1
Hi,

On 19-06-17 13:59, Adrian Hunter wrote:
> On 16/06/17 17:37, Hans de Goede wrote:
>> Hi,
>>
>> On 16-06-17 14:34, Adrian Hunter wrote:
>>> On 16/06/17 15:33, Hans de Goede wrote:
>>>> Hi,
>>>>
>>>> On 14-06-17 15:20, Hans de Goede wrote:
>>>>> Hi,
>>>>>
>>>>> On 14-06-17 09:43, Adrian Hunter wrote:
>>>>>> On 12/06/17 16:27, Hans de Goede wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>> On 12-06-17 14:11, Adrian Hunter wrote:
>>>>>>>> On 08/06/17 21:55, Hans de Goede wrote:
>>>>>>>>> Add a DMI based blacklist for systems where probing some sdio
>>>>>>>>> interfaces
>>>>>>>>> is harmful (e.g. causes pci-e based wifi to not work).
>>>>>>>>>
>>>>>>>>> BugLink: https://bbs.archlinux.org/viewtopic.php?id=224086
>>>>>>>>> Fixes: db52d4f8a4bd ("mmc: sdhci-acpi: support 80860F14 UID 2 SDIO
>>>>>>>>> bus")
>>>>>>>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>>>>>>>>> ---
>>>>>>>>> Changes in v2:
>>>>>>>>> -Adjust for changes in mmc: sdhci-acpi: Add fix_up_power_blacklist
>>>>>>>>> module
>>>>>>>>> option
>>>>>>>>> -Only use a single fix_up_power_dmi_blacklist for the GPDwin further
>>>>>>>>> testing
>>>>>>>>>      has shown that the DMI strings are unique enough that we do not
>>>>>>>>> need the
>>>>>>>>>      bios-date in there
>>>>>>>>>
>>>>>>>>> Changes in v3:
>>>>>>>>> -Adjust for changes to "mmc: sdhci-acpi: Add blacklist module option"
>>>>>>>>>
>>>>>>>>> Changes in v4:
>>>>>>>>> -Rename blacklist to dmi_probe_blacklist as it now blacklists probing,
>>>>>>>>>      rather then calling acpi_device_fix_up_power.
>>>>>>>>> -Also check bios-date against known bios-dates for the GPD win, to
>>>>>>>>> avoid
>>>>>>>>>      possible false positives due to the use of quite generic DMI
>>>>>>>>> strings
>>>>>>>>> -Add Fixes and BugLink tags
>>>>>>>>> ---
>>>>>>>>>      drivers/mmc/host/sdhci-acpi.c | 64
>>>>>>>>> +++++++++++++++++++++++++++++++++++++++++++
>>>>>>>>>      1 file changed, 64 insertions(+)
>>>>>>>>>
>>>>>>>>> diff --git a/drivers/mmc/host/sdhci-acpi.c
>>>>>>>>> b/drivers/mmc/host/sdhci-acpi.c
>>>>>>>>> index ecc3aefd4643..3e12a6a8ad99 100644
>>>>>>>>> --- a/drivers/mmc/host/sdhci-acpi.c
>>>>>>>>> +++ b/drivers/mmc/host/sdhci-acpi.c
>>>>>>>>> @@ -36,6 +36,7 @@
>>>>>>>>>      #include <linux/pm.h>
>>>>>>>>>      #include <linux/pm_runtime.h>
>>>>>>>>>      #include <linux/delay.h>
>>>>>>>>> +#include <linux/dmi.h>
>>>>>>>>>        #include <linux/mmc/host.h>
>>>>>>>>>      #include <linux/mmc/pm.h>
>>>>>>>>> @@ -83,6 +84,11 @@ struct sdhci_acpi_host {
>>>>>>>>>          bool                use_runtime_pm;
>>>>>>>>>      };
>>>>>>>>>      +struct dmi_probe_blacklist_data {
>>>>>>>>> +    const char *hid_uid;
>>>>>>>>> +    const char * const *bios_dates;
>>>>>>>>> +};
>>>>>>>>> +
>>>>>>>>>      static char *blacklist;
>>>>>>>>>        static bool sdhci_acpi_compare_hid_uid(const char *match,
>>>>>>>>> const char
>>>>>>>>> *hid,
>>>>>>>>> @@ -116,6 +122,34 @@ static bool sdhci_acpi_compare_hid_uid(const char
>>>>>>>>> *match, const char *hid,
>>>>>>>>>          return false;
>>>>>>>>>      }
>>>>>>>>>      +static const char *sdhci_acpi_get_dmi_blacklist(const struct
>>>>>>>>> dmi_system_id *bl)
>>>>>>>>> +{
>>>>>>>>> +    const struct dmi_system_id *dmi_id;
>>>>>>>>> +    const struct dmi_probe_blacklist_data *bl_data;
>>>>>>>>> +    const char *bios_date;
>>>>>>>>> +    int i;
>>>>>>>>> +
>>>>>>>>> +    dmi_id = dmi_first_match(bl);
>>>>>>>>> +    if (!dmi_id)
>>>>>>>>> +        return NULL;
>>>>>>>>> +
>>>>>>>>> +    bl_data = dmi_id->driver_data;
>>>>>>>>> +
>>>>>>>>> +    if (!bl_data->bios_dates)
>>>>>>>>> +        return bl_data->hid_uid;
>>>>>>>>> +
>>>>>>>>> +    bios_date = dmi_get_system_info(DMI_BIOS_DATE);
>>>>>>>>> +    if (!bios_date)
>>>>>>>>> +        return NULL;
>>>>>>>>> +
>>>>>>>>> +    for (i = 0; bl_data->bios_dates[i]; i++) {
>>>>>>>>> +        if (strcmp(bl_data->bios_dates[i], bios_date) == 0)
>>>>>>>>> +            return bl_data->hid_uid;
>>>>>>>>> +    }
>>>>>>>>> +
>>>>>>>>> +    return NULL;
>>>>>>>>> +}
>>>>>>>>> +
>>>>>>>>>      static inline bool sdhci_acpi_flag(struct sdhci_acpi_host *c,
>>>>>>>>> unsigned
>>>>>>>>> int flag)
>>>>>>>>>      {
>>>>>>>>>          return c->slot && (c->slot->flags & flag);
>>>>>>>>> @@ -391,6 +425,33 @@ static const struct acpi_device_id
>>>>>>>>> sdhci_acpi_ids[] = {
>>>>>>>>>      };
>>>>>>>>>      MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids);
>>>>>>>>>      +const struct dmi_probe_blacklist_data gpd_win_bl_data = {
>>>>>>>>> +    .hid_uid = "80860F14:2",
>>>>>>>>> +    .bios_dates = (const char * const []){
>>>>>>>>> +        "10/25/2016", "11/18/2016", "02/21/2017", NULL },
>>>>>>>>> +};
>>>>>>>>> +
>>>>>>>>> +static const struct dmi_system_id dmi_probe_blacklist[] = {
>>>>>>>>> +    {
>>>>>>>>> +        /*
>>>>>>>>> +         * Match for the GPDwin which unfortunately uses somewhat
>>>>>>>>> +         * generic dmi strings, which is why we test for 4 strings
>>>>>>>>> +         * and a known BIOS date.
>>>>>>>>> +         * Comparing against 29 other byt/cht boards, board_name is
>>>>>>>>> +         * unique to the GPDwin, where as only 2 other boards have the
>>>>>>>>> +         * same board_serial and 3 others have the same board_vendor
>>>>>>>>> +         */
>>>>>>>>> +        .driver_data = (void *)&gpd_win_bl_data,
>>>>>>>>> +        .matches = {
>>>>>>>>> +            DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
>>>>>>>>> +            DMI_MATCH(DMI_BOARD_NAME, "Default string"),
>>>>>>>>> +            DMI_MATCH(DMI_BOARD_SERIAL, "Default string"),
>>>>>>>>> +            DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
>>>>>>>>> +        },
>>>>>>>>
>>>>>>>> To me this is matching by accident rather than by design, which is not
>>>>>>>> acceptable.
>>>>>>>
>>>>>>> I already explained why we need this dmi quirk in your reply of v3,
>>>>>>> it would have been nice if you replied there.
>>>>>>
>>>>>> I understand what you are saying, but that doesn't make the patch
>>>>>> acceptable, so I cannot Ack it.
>>>>>>
>>>>>>>
>>>>>>> As I already mentioned when I first submitted this patch-set this
>>>>>>> patch-set fixes a regression. When I first installed Linux on this
>>>>>>> system, the wifi just worked, until this commit got merged:
>>>>>>>
>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=db52d4f8a4bde36263a7cc9d46ff20b243562ac9
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> So that gives us 3 options:
>>>>>>
>>>>>> In the absence of another solution, the options are:
>>>>>>       1. get the BIOS fixed
>>>>>
>>>>> a. That is not going to happen (I've already contacted the vendor).
>>>>> b. Even if that were to happen, almost no-one will update the BIOS, so
>>>>>       this does not help
>>>>>
>>>>>>       2. use the module option to blacklist the bad device
>>>>>
>>>>> Needing to use a module-option, where before none was necessary
>>>>> is still a regression. I've personally had a commit of mine
>>>>> reverted by Torvalds himself because I changed something which
>>>>> would require the use a of a kernel cmdline option in certain
>>>>> corner-cases where no cmdline option was needed before.
>>>>>
>>>>> Basically your solutions boil down to my:
>>>>>
>>>>>>> 2) Do nothing, live with the regression.
>>>>>
>>>>>>> 2. is what you seem to be advocating, but since the kernel has a clear
>>>>>>> no regressions policy that is not an option either
>>>>>
>>>>> So your advocating we just live with the REGRESSION, because that
>>>>> is what this is a REGRESSION and nothing else. That is simply
>>>>> not acceptable (and clearly against kernel policy).
>>>>>
>>>>> I've compared DMI data to 29 other boards using the same chipset
>>>>> to prove the DMI match is unique, then since you are still worried
>>>>> about the match being too generic I also added BIOS date checking,
>>>>> which certainly makes the match more then unique enough, something to
>>>>> which you've not even responded...
>>>>>
>>>>> In the mean time users have been suffering from this regression
>>>>> for 3 months now:
>>>>> https://bbs.archlinux.org/viewtopic.php?id=224086
>>>>>
>>>>> I've no words for this, other then that your blocking of fixing
>>>>> this REGRESSION, without you even addressing my factual arguments
>>>>> why this match is not too generic, vs you're feeling that it is
>>>>> too generic, simply is unacceptable.
>>>>
>>>> To be clear, I understand that needing DMI quirks in the first place
>>>> is undesirable, and that this vendor using way too generic strings
>>>> is adding extra ugliness to the ugliness of needing DMI quirks in
>>>> the first place, so I understand your reluctance here.
>>>>
>>>> But to me making this "just" work for users trumps my desire to
>>>> avoid ugliness like this. I really want to see Linux used by as much
>>>> users as possible and in order for that to happen we need to have
>>>> Ubunutu / Fedora just work with their hardware, if users first need
>>>> to google a kernel cmdline option, then they will just stop using
>>>> Linux.
>>>
>>> Perhaps there is something else we can match on, like the presence of the
>>> PCIe wifi device since we only use SDIO for wifi.  Can you send a copy of
>>> the ACPI DSDT table, or an acpidump file.  Also lspci output.
>>
>> Full acpidump is here:
>>
>> https://fedorapeople.org/~jwrdegoede/GPDwin.acpidump.20161025
>>
>> dsdt.dsl:
>>
>> https://fedorapeople.org/~jwrdegoede/GPD-win/dsdt.dsl.orig
>>
>> lspci -nn:
>>
>> 00:00.0 Host bridge [0600]: Intel Corporation Atom/Celeron/Pentium Processor
>> x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [8086:2280] (rev 20)
>> 00:02.0 VGA compatible controller [0300]: Intel Corporation
>> Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration
>> Registers [8086:22b0] (rev 20)
>> 00:0b.0 Signal processing controller [1180]: Intel Corporation
>> Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management
>> Controller [8086:22dc] (rev 20)
>> 00:14.0 USB controller [0c03]: Intel Corporation Atom/Celeron/Pentium
>> Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [8086:22b5] (rev 20)
>> 00:16.0 USB controller [0c03]: Intel Corporation Device [8086:22b7] (rev 20)
>> 00:1a.0 Encryption controller [1080]: Intel Corporation Atom/Celeron/Pentium
>> Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine [8086:2298]
>> (rev 20)
>> 00:1c.0 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor
>> x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 [8086:22c8] (rev 20)
>> 00:1f.0 ISA bridge [0601]: Intel Corporation Atom/Celeron/Pentium Processor
>> x5-E8000/J3xxx/N3xxx Series PCU [8086:229c] (rev 20)
>> 01:00.0 Network controller [0280]: Broadcom Limited BCM4356 802.11ac
>> Wireless Network Adapter [14e4:43ec] (rev 02)
>>
>> Note that one of the issues with matching on something else
>> is probe ordering, so matching on say a pci device is tricky,
>> what if the pci-bus is not yet (fully) enumerated ?
> 
> The PCI bus is first enumerated when the subsystems are initialized
> which is before driver initialization.

Ok.

> Does this work?

I'm happy to report that yes it does. If you prefer this solution
then that is fine by me:

Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans



> 
> diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
> index cf66a3db71b8..ac678e9fb19a 100644
> --- a/drivers/mmc/host/sdhci-acpi.c
> +++ b/drivers/mmc/host/sdhci-acpi.c
> @@ -45,6 +45,7 @@
>   #include <asm/cpu_device_id.h>
>   #include <asm/intel-family.h>
>   #include <asm/iosf_mbi.h>
> +#include <linux/pci.h>
>   #endif
>   
>   #include "sdhci.h"
> @@ -134,6 +135,16 @@ static bool sdhci_acpi_byt(void)
>   	return x86_match_cpu(byt);
>   }
>   
> +static bool sdhci_acpi_cht(void)
> +{
> +	static const struct x86_cpu_id cht[] = {
> +		{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_AIRMONT },
> +		{}
> +	};
> +
> +	return x86_match_cpu(cht);
> +}
> +
>   #define BYT_IOSF_SCCEP			0x63
>   #define BYT_IOSF_OCP_NETCTRL0		0x1078
>   #define BYT_IOSF_OCP_TIMEOUT_BASE	GENMASK(10, 8)
> @@ -178,6 +189,45 @@ static bool sdhci_acpi_byt_defer(struct device *dev)
>   	return false;
>   }
>   
> +static bool sdhci_acpi_cht_pci_wifi(unsigned int vendor, unsigned int device,
> +				    unsigned int slot, unsigned int parent_slot)
> +{
> +	struct pci_dev *dev, *parent, *from = NULL;
> +
> +	while (1) {
> +		dev = pci_get_device(vendor, device, from);
> +		pci_dev_put(from);
> +		if (!dev)
> +			break;
> +		parent = pci_upstream_bridge(dev);
> +		if (ACPI_COMPANION(&dev->dev) && PCI_SLOT(dev->devfn) == slot &&
> +		    parent && PCI_SLOT(parent->devfn) == parent_slot &&
> +		    !pci_upstream_bridge(parent)) {
> +			pci_dev_put(dev);
> +			return true;
> +		}
> +		from = dev;
> +	}
> +
> +	return false;
> +}
> +
> +/*
> + * GPDwin uses PCI wifi which conflicts with SDIO's use of
> + * acpi_device_fix_up_power() on child device nodes. Identifying GPDwin is
> + * problematic, but since SDIO is only used for wifi, the presence of the PCI
> + * wifi card in the expected slot with an ACPI companion node, is used to
> + * indicate that acpi_device_fix_up_power() should be avoided.
> + */
> +static inline bool sdhci_acpi_no_fixup_child_power(const char *hid,
> +						   const char *uid)
> +{
> +	return sdhci_acpi_cht() &&
> +	       !strcmp(hid, "80860F14") &&
> +	       !strcmp(uid, "2") &&
> +	       sdhci_acpi_cht_pci_wifi(0x14e4, 0x43ec, 0, 28);
> +}
> +
>   #else
>   
>   static inline void sdhci_acpi_byt_setting(struct device *dev)
> @@ -189,6 +239,12 @@ static inline bool sdhci_acpi_byt_defer(struct device *dev)
>   	return false;
>   }
>   
> +static inline bool sdhci_acpi_no_fixup_child_power(const char *hid,
> +						   const char *uid)
> +{
> +	return false;
> +}
> +
>   #endif
>   
>   static int bxt_get_cd(struct mmc_host *mmc)
> @@ -389,18 +445,20 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
>   	if (acpi_bus_get_device(handle, &device))
>   		return -ENODEV;
>   
> +	hid = acpi_device_hid(device);
> +	uid = device->pnp.unique_id;
> +
>   	/* Power on the SDHCI controller and its children */
>   	acpi_device_fix_up_power(device);
> -	list_for_each_entry(child, &device->children, node)
> -		if (child->status.present && child->status.enabled)
> -			acpi_device_fix_up_power(child);
> +	if (!sdhci_acpi_no_fixup_child_power(hid, uid)) {
> +		list_for_each_entry(child, &device->children, node)
> +			if (child->status.present && child->status.enabled)
> +				acpi_device_fix_up_power(child);
> +	}
>   
>   	if (sdhci_acpi_byt_defer(dev))
>   		return -EPROBE_DEFER;
>   
> -	hid = acpi_device_hid(device);
> -	uid = device->pnp.unique_id;
> -
>   	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>   	if (!iomem)
>   		return -ENOMEM;
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Hans de Goede June 21, 2017, 8:56 a.m. UTC | #2
Hi,

On 19-06-17 16:07, Hans de Goede wrote:
> Hi,
> 
> On 19-06-17 13:59, Adrian Hunter wrote:

<snip>

>>>> Perhaps there is something else we can match on, like the presence of the
>>>> PCIe wifi device since we only use SDIO for wifi.  Can you send a copy of
>>>> the ACPI DSDT table, or an acpidump file.  Also lspci output.

<snip>

>> Does this work?
> 
> I'm happy to report that yes it does. If you prefer this solution
> then that is fine by me:
> 
> Acked-by: Hans de Goede <hdegoede@redhat.com>
> Tested-by: Hans de Goede <hdegoede@redhat.com>

So what is the plan moving forward with this ?

Yesterday I was running some tests on a GPD-win a friend recently bought and
I hit this issue again, my usb-disk with a test-install was running my solution
with the BIOS date check and that failed because his model had a new BIOS
build and thus a different date. So I believe that this patch is better
then mine as it won't break with BIOS updates and avoids us needing to
patch the quirk table all the time.

As such I would like to see us move forward with this patch and get it
merged for 4.13 (with a Cc stable) so that we can finally get this
regression fixed.

Adrian, can you do an official submission of this patch (with my ack
and tested-by) so that Ulf can merge this ?

Regards,

Hans



>> diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
>> index cf66a3db71b8..ac678e9fb19a 100644
>> --- a/drivers/mmc/host/sdhci-acpi.c
>> +++ b/drivers/mmc/host/sdhci-acpi.c
>> @@ -45,6 +45,7 @@
>>   #include <asm/cpu_device_id.h>
>>   #include <asm/intel-family.h>
>>   #include <asm/iosf_mbi.h>
>> +#include <linux/pci.h>
>>   #endif
>>   #include "sdhci.h"
>> @@ -134,6 +135,16 @@ static bool sdhci_acpi_byt(void)
>>       return x86_match_cpu(byt);
>>   }
>> +static bool sdhci_acpi_cht(void)
>> +{
>> +    static const struct x86_cpu_id cht[] = {
>> +        { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_AIRMONT },
>> +        {}
>> +    };
>> +
>> +    return x86_match_cpu(cht);
>> +}
>> +
>>   #define BYT_IOSF_SCCEP            0x63
>>   #define BYT_IOSF_OCP_NETCTRL0        0x1078
>>   #define BYT_IOSF_OCP_TIMEOUT_BASE    GENMASK(10, 8)
>> @@ -178,6 +189,45 @@ static bool sdhci_acpi_byt_defer(struct device *dev)
>>       return false;
>>   }
>> +static bool sdhci_acpi_cht_pci_wifi(unsigned int vendor, unsigned int device,
>> +                    unsigned int slot, unsigned int parent_slot)
>> +{
>> +    struct pci_dev *dev, *parent, *from = NULL;
>> +
>> +    while (1) {
>> +        dev = pci_get_device(vendor, device, from);
>> +        pci_dev_put(from);
>> +        if (!dev)
>> +            break;
>> +        parent = pci_upstream_bridge(dev);
>> +        if (ACPI_COMPANION(&dev->dev) && PCI_SLOT(dev->devfn) == slot &&
>> +            parent && PCI_SLOT(parent->devfn) == parent_slot &&
>> +            !pci_upstream_bridge(parent)) {
>> +            pci_dev_put(dev);
>> +            return true;
>> +        }
>> +        from = dev;
>> +    }
>> +
>> +    return false;
>> +}
>> +
>> +/*
>> + * GPDwin uses PCI wifi which conflicts with SDIO's use of
>> + * acpi_device_fix_up_power() on child device nodes. Identifying GPDwin is
>> + * problematic, but since SDIO is only used for wifi, the presence of the PCI
>> + * wifi card in the expected slot with an ACPI companion node, is used to
>> + * indicate that acpi_device_fix_up_power() should be avoided.
>> + */
>> +static inline bool sdhci_acpi_no_fixup_child_power(const char *hid,
>> +                           const char *uid)
>> +{
>> +    return sdhci_acpi_cht() &&
>> +           !strcmp(hid, "80860F14") &&
>> +           !strcmp(uid, "2") &&
>> +           sdhci_acpi_cht_pci_wifi(0x14e4, 0x43ec, 0, 28);
>> +}
>> +
>>   #else
>>   static inline void sdhci_acpi_byt_setting(struct device *dev)
>> @@ -189,6 +239,12 @@ static inline bool sdhci_acpi_byt_defer(struct device *dev)
>>       return false;
>>   }
>> +static inline bool sdhci_acpi_no_fixup_child_power(const char *hid,
>> +                           const char *uid)
>> +{
>> +    return false;
>> +}
>> +
>>   #endif
>>   static int bxt_get_cd(struct mmc_host *mmc)
>> @@ -389,18 +445,20 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
>>       if (acpi_bus_get_device(handle, &device))
>>           return -ENODEV;
>> +    hid = acpi_device_hid(device);
>> +    uid = device->pnp.unique_id;
>> +
>>       /* Power on the SDHCI controller and its children */
>>       acpi_device_fix_up_power(device);
>> -    list_for_each_entry(child, &device->children, node)
>> -        if (child->status.present && child->status.enabled)
>> -            acpi_device_fix_up_power(child);
>> +    if (!sdhci_acpi_no_fixup_child_power(hid, uid)) {
>> +        list_for_each_entry(child, &device->children, node)
>> +            if (child->status.present && child->status.enabled)
>> +                acpi_device_fix_up_power(child);
>> +    }
>>       if (sdhci_acpi_byt_defer(dev))
>>           return -EPROBE_DEFER;
>> -    hid = acpi_device_hid(device);
>> -    uid = device->pnp.unique_id;
>> -
>>       iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>       if (!iomem)
>>           return -ENOMEM;
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index cf66a3db71b8..ac678e9fb19a 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -45,6 +45,7 @@ 
 #include <asm/cpu_device_id.h>
 #include <asm/intel-family.h>
 #include <asm/iosf_mbi.h>
+#include <linux/pci.h>
 #endif
 
 #include "sdhci.h"
@@ -134,6 +135,16 @@  static bool sdhci_acpi_byt(void)
 	return x86_match_cpu(byt);
 }
 
+static bool sdhci_acpi_cht(void)
+{
+	static const struct x86_cpu_id cht[] = {
+		{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_AIRMONT },
+		{}
+	};
+
+	return x86_match_cpu(cht);
+}
+
 #define BYT_IOSF_SCCEP			0x63
 #define BYT_IOSF_OCP_NETCTRL0		0x1078
 #define BYT_IOSF_OCP_TIMEOUT_BASE	GENMASK(10, 8)
@@ -178,6 +189,45 @@  static bool sdhci_acpi_byt_defer(struct device *dev)
 	return false;
 }
 
+static bool sdhci_acpi_cht_pci_wifi(unsigned int vendor, unsigned int device,
+				    unsigned int slot, unsigned int parent_slot)
+{
+	struct pci_dev *dev, *parent, *from = NULL;
+
+	while (1) {
+		dev = pci_get_device(vendor, device, from);
+		pci_dev_put(from);
+		if (!dev)
+			break;
+		parent = pci_upstream_bridge(dev);
+		if (ACPI_COMPANION(&dev->dev) && PCI_SLOT(dev->devfn) == slot &&
+		    parent && PCI_SLOT(parent->devfn) == parent_slot &&
+		    !pci_upstream_bridge(parent)) {
+			pci_dev_put(dev);
+			return true;
+		}
+		from = dev;
+	}
+
+	return false;
+}
+
+/*
+ * GPDwin uses PCI wifi which conflicts with SDIO's use of
+ * acpi_device_fix_up_power() on child device nodes. Identifying GPDwin is
+ * problematic, but since SDIO is only used for wifi, the presence of the PCI
+ * wifi card in the expected slot with an ACPI companion node, is used to
+ * indicate that acpi_device_fix_up_power() should be avoided.
+ */
+static inline bool sdhci_acpi_no_fixup_child_power(const char *hid,
+						   const char *uid)
+{
+	return sdhci_acpi_cht() &&
+	       !strcmp(hid, "80860F14") &&
+	       !strcmp(uid, "2") &&
+	       sdhci_acpi_cht_pci_wifi(0x14e4, 0x43ec, 0, 28);
+}
+
 #else
 
 static inline void sdhci_acpi_byt_setting(struct device *dev)
@@ -189,6 +239,12 @@  static inline bool sdhci_acpi_byt_defer(struct device *dev)
 	return false;
 }
 
+static inline bool sdhci_acpi_no_fixup_child_power(const char *hid,
+						   const char *uid)
+{
+	return false;
+}
+
 #endif
 
 static int bxt_get_cd(struct mmc_host *mmc)
@@ -389,18 +445,20 @@  static int sdhci_acpi_probe(struct platform_device *pdev)
 	if (acpi_bus_get_device(handle, &device))
 		return -ENODEV;
 
+	hid = acpi_device_hid(device);
+	uid = device->pnp.unique_id;
+
 	/* Power on the SDHCI controller and its children */
 	acpi_device_fix_up_power(device);
-	list_for_each_entry(child, &device->children, node)
-		if (child->status.present && child->status.enabled)
-			acpi_device_fix_up_power(child);
+	if (!sdhci_acpi_no_fixup_child_power(hid, uid)) {
+		list_for_each_entry(child, &device->children, node)
+			if (child->status.present && child->status.enabled)
+				acpi_device_fix_up_power(child);
+	}
 
 	if (sdhci_acpi_byt_defer(dev))
 		return -EPROBE_DEFER;
 
-	hid = acpi_device_hid(device);
-	uid = device->pnp.unique_id;
-
 	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!iomem)
 		return -ENOMEM;