diff mbox

[v3,01/11] libmultipath: load_config: skip setting unnecessary defaults

Message ID 20170621150630.25773-2-mwilck@suse.com (mailing list archive)
State Not Applicable, archived
Delegated to: Mike Snitzer
Headers show

Commit Message

Martin Wilck June 21, 2017, 3:06 p.m. UTC 
We have the logic for setting defaults for paths and maps
in propsel.c. By pre-setting conf values with defaults in
load_config(), we generate irritating log messages like
'features = "0" (setting: multipath.conf defaults/devices section)'
if multipath.conf doesn't contain a features setting at all.

For some config settings, we need to use declare_def_snprint_defint()
now to make sure "multipathd show config" prints all defaults correctly.
To avoid confusion, we don't do this for "max_sectors", because
multipathd leaves this untouched by default.

Signed-off-by: Martin Wilck <mwilck@suse.com>
Acked-by: Benjamin Marzinski <bmarzins@redhat.com>
---
 libmultipath/config.c  | 16 ----------------
 libmultipath/dict.c    | 11 +++++++----
 libmultipath/propsel.c |  6 ++++++
 3 files changed, 13 insertions(+), 20 deletions(-)

Comments

Hannes Reinecke June 22, 2017, 6:01 a.m. UTC | #1 
On 06/21/2017 05:06 PM, Martin Wilck wrote:
> We have the logic for setting defaults for paths and maps
> in propsel.c. By pre-setting conf values with defaults in
> load_config(), we generate irritating log messages like
> 'features = "0" (setting: multipath.conf defaults/devices section)'
> if multipath.conf doesn't contain a features setting at all.
> 
> For some config settings, we need to use declare_def_snprint_defint()
> now to make sure "multipathd show config" prints all defaults correctly.
> To avoid confusion, we don't do this for "max_sectors", because
> multipathd leaves this untouched by default.
> 
> Signed-off-by: Martin Wilck <mwilck@suse.com>
> Acked-by: Benjamin Marzinski <bmarzins@redhat.com>
> ---
>  libmultipath/config.c  | 16 ----------------
>  libmultipath/dict.c    | 11 +++++++----
>  libmultipath/propsel.c |  6 ++++++
>  3 files changed, 13 insertions(+), 20 deletions(-)
> 
Reviewed-by: Hannes Reinecke <hare@suse.com>

Cheers,

Hannes
diff mbox

Patch

diff --git a/libmultipath/config.c b/libmultipath/config.c
index 6b236019..60e345b3 100644
--- a/libmultipath/config.c
+++ b/libmultipath/config.c
@@ -606,40 +606,24 @@  load_config (char * file)
 	if (!conf->verbosity)
 		conf->verbosity = DEFAULT_VERBOSITY;
 
-	conf->minio = DEFAULT_MINIO;
-	conf->minio_rq = DEFAULT_MINIO_RQ;
 	get_sys_max_fds(&conf->max_fds);
 	conf->bindings_file = set_default(DEFAULT_BINDINGS_FILE);
 	conf->wwids_file = set_default(DEFAULT_WWIDS_FILE);
 	conf->multipath_dir = set_default(DEFAULT_MULTIPATHDIR);
-	conf->features = set_default(DEFAULT_FEATURES);
-	conf->flush_on_last_del = DEFAULT_FLUSH;
 	conf->attribute_flags = 0;
 	conf->reassign_maps = DEFAULT_REASSIGN_MAPS;
 	conf->checkint = DEFAULT_CHECKINT;
 	conf->max_checkint = 0;
-	conf->pgfailback = DEFAULT_FAILBACK;
-	conf->fast_io_fail = DEFAULT_FAST_IO_FAIL;
-	conf->retain_hwhandler = DEFAULT_RETAIN_HWHANDLER;
-	conf->detect_prio = DEFAULT_DETECT_PRIO;
-	conf->detect_checker = DEFAULT_DETECT_CHECKER;
 	conf->force_sync = DEFAULT_FORCE_SYNC;
 	conf->partition_delim = DEFAULT_PARTITION_DELIM;
 	conf->processed_main_config = 0;
 	conf->find_multipaths = DEFAULT_FIND_MULTIPATHS;
 	conf->uxsock_timeout = DEFAULT_REPLY_TIMEOUT;
-	conf->uid_attribute = set_default(DEFAULT_UID_ATTRIBUTE);
 	conf->retrigger_tries = DEFAULT_RETRIGGER_TRIES;
 	conf->retrigger_delay = DEFAULT_RETRIGGER_DELAY;
 	conf->uev_wait_timeout = DEFAULT_UEV_WAIT_TIMEOUT;
-	conf->deferred_remove = DEFAULT_DEFERRED_REMOVE;
-	conf->skip_kpartx = DEFAULT_SKIP_KPARTX;
 	conf->disable_changed_wwids = DEFAULT_DISABLE_CHANGED_WWIDS;
 	conf->remove_retries = 0;
-	conf->max_sectors_kb = DEFAULT_MAX_SECTORS_KB;
-	conf->san_path_err_threshold = DEFAULT_ERR_CHECKS;
-	conf->san_path_err_forget_rate = DEFAULT_ERR_CHECKS;
-	conf->san_path_err_recovery_time = DEFAULT_ERR_CHECKS;
 
 	/*
 	 * preload default hwtable
diff --git a/libmultipath/dict.c b/libmultipath/dict.c
index 82066f67..9dc10904 100644
--- a/libmultipath/dict.c
+++ b/libmultipath/dict.c
@@ -630,7 +630,7 @@  print_fast_io_fail(char * buff, int len, void *ptr)
 }
 
 declare_def_handler(fast_io_fail, set_fast_io_fail)
-declare_def_snprint(fast_io_fail, print_fast_io_fail)
+declare_def_snprint_defint(fast_io_fail, print_fast_io_fail, DEFAULT_FAST_IO_FAIL)
 declare_ovr_handler(fast_io_fail, set_fast_io_fail)
 declare_ovr_snprint(fast_io_fail, print_fast_io_fail)
 declare_hw_handler(fast_io_fail, set_fast_io_fail)
@@ -1082,7 +1082,8 @@  declare_hw_snprint(delay_wait_checks, print_off_int_undef)
 declare_mp_handler(delay_wait_checks, set_off_int_undef)
 declare_mp_snprint(delay_wait_checks, print_off_int_undef)
 declare_def_handler(san_path_err_threshold, set_off_int_undef)
-declare_def_snprint(san_path_err_threshold, print_off_int_undef)
+declare_def_snprint_defint(san_path_err_threshold, print_off_int_undef,
+			   DEFAULT_ERR_CHECKS)
 declare_ovr_handler(san_path_err_threshold, set_off_int_undef)
 declare_ovr_snprint(san_path_err_threshold, print_off_int_undef)
 declare_hw_handler(san_path_err_threshold, set_off_int_undef)
@@ -1090,7 +1091,8 @@  declare_hw_snprint(san_path_err_threshold, print_off_int_undef)
 declare_mp_handler(san_path_err_threshold, set_off_int_undef)
 declare_mp_snprint(san_path_err_threshold, print_off_int_undef)
 declare_def_handler(san_path_err_forget_rate, set_off_int_undef)
-declare_def_snprint(san_path_err_forget_rate, print_off_int_undef)
+declare_def_snprint_defint(san_path_err_forget_rate, print_off_int_undef,
+			   DEFAULT_ERR_CHECKS)
 declare_ovr_handler(san_path_err_forget_rate, set_off_int_undef)
 declare_ovr_snprint(san_path_err_forget_rate, print_off_int_undef)
 declare_hw_handler(san_path_err_forget_rate, set_off_int_undef)
@@ -1098,7 +1100,8 @@  declare_hw_snprint(san_path_err_forget_rate, print_off_int_undef)
 declare_mp_handler(san_path_err_forget_rate, set_off_int_undef)
 declare_mp_snprint(san_path_err_forget_rate, print_off_int_undef)
 declare_def_handler(san_path_err_recovery_time, set_off_int_undef)
-declare_def_snprint(san_path_err_recovery_time, print_off_int_undef)
+declare_def_snprint_defint(san_path_err_recovery_time, print_off_int_undef,
+			   DEFAULT_ERR_CHECKS)
 declare_ovr_handler(san_path_err_recovery_time, set_off_int_undef)
 declare_ovr_snprint(san_path_err_recovery_time, print_off_int_undef)
 declare_hw_handler(san_path_err_recovery_time, set_off_int_undef)
diff --git a/libmultipath/propsel.c b/libmultipath/propsel.c
index 27f39517..c8ccede5 100644
--- a/libmultipath/propsel.c
+++ b/libmultipath/propsel.c
@@ -752,6 +752,12 @@  int select_max_sectors_kb(struct config *conf, struct multipath * mp)
 	mp_set_ovr(max_sectors_kb);
 	mp_set_hwe(max_sectors_kb);
 	mp_set_conf(max_sectors_kb);
+	mp_set_default(max_sectors_kb, DEFAULT_MAX_SECTORS_KB);
+	/*
+	 * In the default case, we will not modify max_sectors_kb in sysfs
+	 * (see sysfs_set_max_sectors_kb()).
+	 * Don't print a log message here to avoid user confusion.
+	 */
 	return 0;
 out:
 	condlog(3, "%s: max_sectors_kb = %i %s", mp->alias, mp->max_sectors_kb,