[09/11] ARM: dts: rk3228-evb: Enable the internal phy for gmac

Commit Message

David Wu June 23, 2017, 5:02 a.m. UTC

This patch enables the internal phy for rk3228 evb board
by default.
To use the external 1000M phy on evb board, need to make
some switch of evb board to be on.

Signed-off-by: David Wu <[e-mail]>
---
 arch/arm/boot/dts/rk3228-evb.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

Patch

diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
index 5883433..c4002da 100644
--- a/arch/arm/boot/dts/rk3228-evb.dts
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -50,6 +50,16 @@ 
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc_phy";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &emmc {
@@ -60,6 +70,16 @@ 
 	status = "okay";
 };
 
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC_SRC>;
+	assigned-clock-rates = <50000000>;
+	clock_in_out = "output";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rmii";
+	phy-type = "internal";
+	status = "okay";
+};
+
 &tsadc {
 	status = "okay";