[2/8] drm/vc4: Fix misleading name of the continuous flag.
diff mbox

Message ID 20170627195839.3338-3-eric@anholt.net
State New
Headers show

Commit Message

Eric Anholt June 27, 2017, 7:58 p.m. UTC
The logic was all right in the end, the name was just backwards.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/vc4/vc4_dsi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Andrzej Hajda June 29, 2017, 9:03 a.m. UTC | #1
On 27.06.2017 21:58, Eric Anholt wrote:
> The logic was all right in the end, the name was just backwards.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

 --
Regards
Andrzej

Patch
diff mbox

diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index 15f6d5005ab9..629d372633e6 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -736,18 +736,18 @@  static void vc4_dsi_latch_ulps(struct vc4_dsi *dsi, bool latch)
 /* Enters or exits Ultra Low Power State. */
 static void vc4_dsi_ulps(struct vc4_dsi *dsi, bool ulps)
 {
-	bool continuous = dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS;
-	u32 phyc_ulps = ((continuous ? DSI_PORT_BIT(PHYC_CLANE_ULPS) : 0) |
+	bool non_continuous = dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS;
+	u32 phyc_ulps = ((non_continuous ? DSI_PORT_BIT(PHYC_CLANE_ULPS) : 0) |
 			 DSI_PHYC_DLANE0_ULPS |
 			 (dsi->lanes > 1 ? DSI_PHYC_DLANE1_ULPS : 0) |
 			 (dsi->lanes > 2 ? DSI_PHYC_DLANE2_ULPS : 0) |
 			 (dsi->lanes > 3 ? DSI_PHYC_DLANE3_ULPS : 0));
-	u32 stat_ulps = ((continuous ? DSI1_STAT_PHY_CLOCK_ULPS : 0) |
+	u32 stat_ulps = ((non_continuous ? DSI1_STAT_PHY_CLOCK_ULPS : 0) |
 			 DSI1_STAT_PHY_D0_ULPS |
 			 (dsi->lanes > 1 ? DSI1_STAT_PHY_D1_ULPS : 0) |
 			 (dsi->lanes > 2 ? DSI1_STAT_PHY_D2_ULPS : 0) |
 			 (dsi->lanes > 3 ? DSI1_STAT_PHY_D3_ULPS : 0));
-	u32 stat_stop = ((continuous ? DSI1_STAT_PHY_CLOCK_STOP : 0) |
+	u32 stat_stop = ((non_continuous ? DSI1_STAT_PHY_CLOCK_STOP : 0) |
 			 DSI1_STAT_PHY_D0_STOP |
 			 (dsi->lanes > 1 ? DSI1_STAT_PHY_D1_STOP : 0) |
 			 (dsi->lanes > 2 ? DSI1_STAT_PHY_D2_STOP : 0) |