[linux-next] usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys
diff mbox

Message ID 20170629052514.12560-1-vigneshr@ti.com
State New
Headers show

Commit Message

Vignesh Raghavendra June 29, 2017, 5:25 a.m. UTC
commit f54edb539c116 ("usb: dwc3: core: initialize ULPI before trying to
get the PHY") moved call to dwc3_core_get_phy() from dwc3_probe() to
dwc3_core_init() after dwc3_core_soft_reset(). But
dwc3_core_soft_reset() calls phy_init(), therefore dwc3_core_get_phy()
needs to be called before dwc3_core_soft_reset().

Fix this by moving call to dwc3_core_get_phy() before
dwc3_core_soft_reset().

This fixes the following abort seen on DRA7xx platforms
[   24.769118] usb usb2: SerialNumber: xhci-hcd.1.auto
[   24.781144] hub 2-0:1.0: USB hub found
[   24.787836] hub 2-0:1.0: 1 port detected
[   24.809939] Unhandled fault: imprecise external abort (0x1406) at 0x00000000

Reported-by: Carlos Hernandez <ceh@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
---
 drivers/usb/dwc3/core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Vignesh Raghavendra July 11, 2017, 10:30 p.m. UTC | #1
On 6/29/2017 12:25 AM, Vignesh R wrote:
> commit f54edb539c116 ("usb: dwc3: core: initialize ULPI before trying to
> get the PHY") moved call to dwc3_core_get_phy() from dwc3_probe() to
> dwc3_core_init() after dwc3_core_soft_reset(). But
> dwc3_core_soft_reset() calls phy_init(), therefore dwc3_core_get_phy()
> needs to be called before dwc3_core_soft_reset().
> 
> Fix this by moving call to dwc3_core_get_phy() before
> dwc3_core_soft_reset().
> 
> This fixes the following abort seen on DRA7xx platforms
> [   24.769118] usb usb2: SerialNumber: xhci-hcd.1.auto
> [   24.781144] hub 2-0:1.0: USB hub found
> [   24.787836] hub 2-0:1.0: 1 port detected
> [   24.809939] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
> 
> Reported-by: Carlos Hernandez <ceh@ti.com>
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> ---

Could this be picked up for -rc1, so that we have a booting kernel for
dra7 platform? Or is this planned for -rc2?

>  drivers/usb/dwc3/core.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 326b302fc440..03474d3575ab 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -766,15 +766,15 @@ static int dwc3_core_init(struct dwc3 *dwc)
>  			dwc->maximum_speed = USB_SPEED_HIGH;
>  	}
>  
> -	ret = dwc3_core_soft_reset(dwc);
> +	ret = dwc3_core_get_phy(dwc);
>  	if (ret)
>  		goto err0;
>  
> -	ret = dwc3_phy_setup(dwc);
> +	ret = dwc3_core_soft_reset(dwc);
>  	if (ret)
>  		goto err0;
>  
> -	ret = dwc3_core_get_phy(dwc);
> +	ret = dwc3_phy_setup(dwc);
>  	if (ret)
>  		goto err0;
>  
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 326b302fc440..03474d3575ab 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -766,15 +766,15 @@  static int dwc3_core_init(struct dwc3 *dwc)
 			dwc->maximum_speed = USB_SPEED_HIGH;
 	}
 
-	ret = dwc3_core_soft_reset(dwc);
+	ret = dwc3_core_get_phy(dwc);
 	if (ret)
 		goto err0;
 
-	ret = dwc3_phy_setup(dwc);
+	ret = dwc3_core_soft_reset(dwc);
 	if (ret)
 		goto err0;
 
-	ret = dwc3_core_get_phy(dwc);
+	ret = dwc3_phy_setup(dwc);
 	if (ret)
 		goto err0;