diff mbox

[v2] arm64: dts: ls1012a: add USB host controller nodes

Message ID 1500014949-15108-1-git-send-email-ran.wang_1@nxp.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ran Wang July 14, 2017, 6:49 a.m. UTC 
LS1012A has one USB 3.0(DWC3) controller and
one USB 2.0 controller.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
Change in v2:
		Move node usb2@8600000 to the back of sata@3200000 to keep nodes
		sorted in unit-address.

 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

Comments

Shawn Guo July 25, 2017, 8:03 a.m. UTC | #1 
On Fri, Jul 14, 2017 at 02:49:09PM +0800, Ran Wang wrote:
> LS1012A has one USB 3.0(DWC3) controller and
> one USB 2.0 controller.
> 
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index b1554cb..df83915 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -444,6 +444,15 @@ 
 				 <&clockgen 4 3>;
 		};
 
+		usb0: usb3@2f00000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x2f00000 0x0 0x10000>;
+			interrupts = <0 60 0x4>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
 		sata: sata@3200000 {
 			compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
 			reg = <0x0 0x3200000 0x0 0x10000>,
@@ -454,5 +463,13 @@ 
 			dma-coherent;
 			status = "disabled";
 		};
+
+		usb1: usb2@8600000 {
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+			reg = <0x0 0x8600000 0x0 0x1000>;
+			interrupts = <0 139 0x4>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
 	};
 };