diff mbox

[v4,06/10] ARM: mxs: add saif device

Message ID 1311050056-22295-1-git-send-email-b29396@freescale.com (mailing list archive)
State New, archived
Headers show

Commit Message

Aisheng Dong July 19, 2011, 4:34 a.m. UTC
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
---
Changes since v3:
	Drop DIGCTRL-handling based on Wolfram's comment
---
 arch/arm/mach-mxs/Kconfig                       |    1 +
 arch/arm/mach-mxs/devices-mx28.h                |    3 +
 arch/arm/mach-mxs/devices/Kconfig               |    3 +
 arch/arm/mach-mxs/devices/Makefile              |    1 +
 arch/arm/mach-mxs/devices/platform-mxs-saif.c   |   60 +++++++++++++++++++++++
 arch/arm/mach-mxs/include/mach/devices-common.h |   12 +++++
 arch/arm/mach-mxs/mach-mx28evk.c                |   15 ++++++
 7 files changed, 95 insertions(+), 0 deletions(-)

Comments

Mark Brown July 19, 2011, 2:57 p.m. UTC | #1
On Tue, Jul 19, 2011 at 12:34:16PM +0800, Dong Aisheng wrote:
> Signed-off-by: Dong Aisheng <b29396@freescale.com>
> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> Changes since v3:
> 	Drop DIGCTRL-handling based on Wolfram's comment

When reposting you should repost the whole series separately rather than
following up into the middle of the series, it makes it much easier for
people to follow what's going on.
Dong Aisheng July 20, 2011, 2:43 a.m. UTC | #2
2011/7/19 Mark Brown <broonie@opensource.wolfsonmicro.com>:
> On Tue, Jul 19, 2011 at 12:34:16PM +0800, Dong Aisheng wrote:
>> Signed-off-by: Dong Aisheng <b29396@freescale.com>
>> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
>> Cc: Sascha Hauer <s.hauer@pengutronix.de>
>> ---
>> Changes since v3:
>>       Drop DIGCTRL-handling based on Wolfram's comment
>
> When reposting you should repost the whole series separately rather than
> following up into the middle of the series, it makes it much easier for
> people to follow what's going on.
Sorry about that.
Since only one patch changed with another two for rebase, i just
resend these three.
Anyway, i think you are right.
I will resent them all.
Thanks for your suggestions.

Regards
Dong Aisheng
diff mbox

Patch

diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4cd0231..405c28d 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -48,6 +48,7 @@  config MACH_MX28EVK
 	select MXS_HAVE_PLATFORM_FLEXCAN
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
+	select MXS_HAVE_PLATFORM_MXS_SAIF
 	select MXS_OCOTP
 	help
 	  Include support for MX28EVK platform. This includes specific
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 79b9452..c0f21ce 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -45,3 +45,6 @@  extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
 
 struct platform_device *__init mx28_add_mxsfb(
 		const struct mxsfb_platform_data *pdata);
+
+extern const struct mxs_saif_data mx28_saif_data[] __initconst;
+#define mx28_add_saif(id)              mxs_add_saif(&mx28_saif_data[id])
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index acf9eea..b554371 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -23,3 +23,6 @@  config MXS_HAVE_PLATFORM_MXS_PWM
 
 config MXS_HAVE_PLATFORM_MXSFB
 	bool
+
+config MXS_HAVE_PLATFORM_MXS_SAIF
+	bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index 351915c..d3e8cc3 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -8,3 +8,4 @@  obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
 obj-y += platform-gpio-mxs.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
new file mode 100644
index 0000000..1ec965e
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
@@ -0,0 +1,60 @@ 
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_saif_data_entry_single(soc, _id)				\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _SAIF ## _id ## _BASE_ADDR,		\
+		.irq = soc ## _INT_SAIF ## _id,				\
+		.dma = soc ## _DMA_SAIF ## _id,				\
+		.dmairq = soc ## _INT_SAIF ## _id ##_DMA,		\
+	}
+
+#define mxs_saif_data_entry(soc, _id)					\
+	[_id] = mxs_saif_data_entry_single(soc, _id)
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_saif_data mx28_saif_data[] __initconst = {
+	mxs_saif_data_entry(MX28, 0),
+	mxs_saif_data_entry(MX28, 1),
+};
+#endif
+
+struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->dma,
+			.end = data->dma,
+			.flags = IORESOURCE_DMA,
+		}, {
+			.start = data->dmairq,
+			.end = data->dmairq,
+			.flags = IORESOURCE_IRQ,
+		},
+
+	};
+
+	return mxs_add_platform_device("mxs-saif", data->id, res,
+					ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index 812d7a8..a8080f4 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -92,3 +92,15 @@  struct platform_device *__init mxs_add_mxs_mmc(
 /* pwm */
 struct platform_device *__init mxs_add_mxs_pwm(
 		resource_size_t iobase, int id);
+
+/* saif */
+struct mxs_saif_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t irq;
+	resource_size_t dma;
+	resource_size_t dmairq;
+};
+
+struct platform_device *__init mxs_add_saif(
+		const struct mxs_saif_data *data);
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index eaaf6ff..1e5fda9 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -183,6 +183,18 @@  static const iomux_cfg_t mx28evk_pads[] __initconst = {
 
 	/* led */
 	MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
+
+	/* saif0 & saif1 */
+	MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
 };
 
 /* led */
@@ -392,6 +404,9 @@  static void __init mx28evk_init(void)
 
 	mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
 
+	mx28_add_saif(0);
+	mx28_add_saif(1);
+
 	/* power on mmc slot by writing 0 to the gpio */
 	ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
 			       "mmc0-slot-power");