diff mbox

[RESEND,v9,07/12] mfd: dt-bindings: Add RK805 device tree bindings document

Message ID 1502848847-26398-1-git-send-email-chenjh@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

chenjh chenjh Aug. 16, 2017, 2 a.m. UTC 
From: Elaine Zhang <zhangqing@rock-chips.com>

Add device tree bindings documentation for Rockchip's RK805 PMIC.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
 Documentation/devicetree/bindings/mfd/rk808.txt | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 9636ae8..91b6522 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -1,11 +1,14 @@ 
 RK8XX Power Management Integrated Circuit
 
 The rk8xx family current members:
+rk805
 rk808
 rk818
 
 Required properties:
-- compatible: "rockchip,rk808", "rockchip,rk818"
+- compatible: "rockchip,rk805"
+- compatible: "rockchip,rk808"
+- compatible: "rockchip,rk818"
 - reg: I2C slave address
 - interrupt-parent: The parent interrupt controller.
 - interrupts: the interrupt outputs of the controller.
@@ -18,6 +21,14 @@  Optional properties:
 - rockchip,system-power-controller: Telling whether or not this pmic is controlling
   the system power.
 
+Optional RK805 properties:
+- vcc1-supply:  The input supply for DCDC_REG1
+- vcc2-supply:  The input supply for DCDC_REG2
+- vcc3-supply:  The input supply for DCDC_REG3
+- vcc4-supply:  The input supply for DCDC_REG4
+- vcc5-supply:  The input supply for LDO_REG1 and LDO_REG2
+- vcc6-supply:  The input supply for LDO_REG3
+
 Optional RK808 properties:
 - vcc1-supply:  The input supply for DCDC_REG1
 - vcc2-supply:  The input supply for DCDC_REG2
@@ -56,6 +67,15 @@  by a child node of the 'regulators' node.
 		/* standard regulator bindings here */
 	};
 
+Following regulators of the RK805 PMIC regulators are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK805 datasheet.
+
+	- DCDC_REGn
+		- valid values for n are 1 to 4.
+	- LDO_REGn
+		- valid values for n are 1 to 3
+
 Following regulators of the RK808 PMIC block are supported. Note that
 the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
 number as described in RK808 datasheet.