diff mbox

Input: elan_i2c - Make hardware buttons work properly on Asus ROG G752xx

Message ID 20170816114513.9967-1-maxime.bellenge@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Maxime Bellengé Aug. 16, 2017, 11:45 a.m. UTC
Asus ROG G752xx laptops have hardware buttons. Currently only the left button works if a finger touches the pad which is not very convenient.

I couldn't find a clear pattern based on ic type and product id to determine if the device has hardware buttons or if it is a clickpad as it is vendor dependant. So I chose to base the patch on dmi as I couldn't find any other laptop based on elan i2c and having hardware buttons.

Signed-off-by: Maxime Bellengé <maxime.bellenge@gmail.com>
---
 drivers/input/mouse/elan_i2c_core.c | 40 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)

Comments

Dmitry Torokhov Aug. 16, 2017, 6:27 p.m. UTC | #1
On Wed, Aug 16, 2017 at 01:45:13PM +0200, Maxime Bellengé wrote:
> Asus ROG G752xx laptops have hardware buttons. Currently only the left
> button works if a finger touches the pad which is not very convenient.
> 
> I couldn't find a clear pattern based on ic type and product id to
> determine if the device has hardware buttons or if it is a clickpad as
> it is vendor dependant. So I chose to base the patch on dmi as I
> couldn't find any other laptop based on elan i2c and having hardware
> buttons.
> 

KT, any feedback here?

> Signed-off-by: Maxime Bellengé <maxime.bellenge@gmail.com>
> ---
>  drivers/input/mouse/elan_i2c_core.c | 40 ++++++++++++++++++++++++++++++++++++-
>  1 file changed, 39 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
> index 3b616cb7c67f..fa417105898f 100644
> --- a/drivers/input/mouse/elan_i2c_core.c
> +++ b/drivers/input/mouse/elan_i2c_core.c
> @@ -37,6 +37,7 @@
>  #include <linux/of.h>
>  #include <linux/regulator/consumer.h>
>  #include <asm/unaligned.h>
> +#include <linux/dmi.h>
>  
>  #include "elan_i2c.h"
>  
> @@ -923,6 +924,7 @@ static void elan_report_absolute(struct elan_tp_data *data, u8 *packet)
>  	}
>  
>  	input_report_key(input, BTN_LEFT, tp_info & 0x01);
> +        input_report_key(input, BTN_RIGHT, tp_info & 0x02);
>  	input_report_abs(input, ABS_DISTANCE, hover_event != 0);
>  	input_mt_report_pointer_emulation(input, true);
>  	input_sync(input);
> @@ -960,6 +962,39 @@ static irqreturn_t elan_isr(int irq, void *dev_id)
>  }
>  
>  /*
> + * Asus ROG G752xx have hardware buttons
> + */
> + static const struct dmi_system_id elan_dmi_has_hw_buttons[] = {
> + #if defined(CONFIG_DMI) && defined(CONFIG_X86)
> + 	{
> + 		.matches = {
> + 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> + 			DMI_MATCH(DMI_PRODUCT_NAME, "G752VT"),
> + 		},
> + 	},
> + 	{
> + 		.matches = {
> + 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> + 			DMI_MATCH(DMI_PRODUCT_NAME, "G752VS"),
> + 		},
> + 	},
> +        {
> + 		.matches = {
> + 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> + 			DMI_MATCH(DMI_PRODUCT_NAME, "G752VY"),
> + 		},
> + 	},
> +        {
> + 		.matches = {
> + 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> + 			DMI_MATCH(DMI_PRODUCT_NAME, "G752VL"),
> + 		},
> + 	},
> + #endif
> + 	{ }
> + };
> +
> +/*
>   ******************************************************************
>   * Elan initialization functions
>   ******************************************************************
> @@ -991,7 +1026,10 @@ static int elan_setup_input_device(struct elan_tp_data *data)
>  
>  	__set_bit(EV_ABS, input->evbit);
>  	__set_bit(INPUT_PROP_POINTER, input->propbit);
> -	__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
> +        if (dmi_check_system(elan_dmi_has_hw_buttons)) {
> +                __set_bit(BTN_RIGHT, input->keybit);
> +        } else
> +	       __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
>  	__set_bit(BTN_LEFT, input->keybit);
>  
>  	/* Set up ST parameters */
> -- 
> 2.13.5
>
diff mbox

Patch

diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index 3b616cb7c67f..fa417105898f 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -37,6 +37,7 @@ 
 #include <linux/of.h>
 #include <linux/regulator/consumer.h>
 #include <asm/unaligned.h>
+#include <linux/dmi.h>
 
 #include "elan_i2c.h"
 
@@ -923,6 +924,7 @@  static void elan_report_absolute(struct elan_tp_data *data, u8 *packet)
 	}
 
 	input_report_key(input, BTN_LEFT, tp_info & 0x01);
+        input_report_key(input, BTN_RIGHT, tp_info & 0x02);
 	input_report_abs(input, ABS_DISTANCE, hover_event != 0);
 	input_mt_report_pointer_emulation(input, true);
 	input_sync(input);
@@ -960,6 +962,39 @@  static irqreturn_t elan_isr(int irq, void *dev_id)
 }
 
 /*
+ * Asus ROG G752xx have hardware buttons
+ */
+ static const struct dmi_system_id elan_dmi_has_hw_buttons[] = {
+ #if defined(CONFIG_DMI) && defined(CONFIG_X86)
+ 	{
+ 		.matches = {
+ 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ 			DMI_MATCH(DMI_PRODUCT_NAME, "G752VT"),
+ 		},
+ 	},
+ 	{
+ 		.matches = {
+ 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ 			DMI_MATCH(DMI_PRODUCT_NAME, "G752VS"),
+ 		},
+ 	},
+        {
+ 		.matches = {
+ 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ 			DMI_MATCH(DMI_PRODUCT_NAME, "G752VY"),
+ 		},
+ 	},
+        {
+ 		.matches = {
+ 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ 			DMI_MATCH(DMI_PRODUCT_NAME, "G752VL"),
+ 		},
+ 	},
+ #endif
+ 	{ }
+ };
+
+/*
  ******************************************************************
  * Elan initialization functions
  ******************************************************************
@@ -991,7 +1026,10 @@  static int elan_setup_input_device(struct elan_tp_data *data)
 
 	__set_bit(EV_ABS, input->evbit);
 	__set_bit(INPUT_PROP_POINTER, input->propbit);
-	__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+        if (dmi_check_system(elan_dmi_has_hw_buttons)) {
+                __set_bit(BTN_RIGHT, input->keybit);
+        } else
+	       __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
 	__set_bit(BTN_LEFT, input->keybit);
 
 	/* Set up ST parameters */