| Message ID | 1505207272-16983-2-git-send-email-chaotian.jing@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: > Change the comptiable for support of multi-platform > Add description for reg > Add description for source_cg > Add description for mediatek,latch-ck This is at least the 3rd patch with exactly the same vague subject. Please make the subject somewhat unique. > > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > --- > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- > 1 file changed, 10 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > index 4182ea3..405cd06 100644 > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt > and the properties used by the msdc driver. > > Required properties: > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" > +- compatible: value should be either of the following. > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 > +- reg: physical base address of the controller and length > - interrupts: Should contain MSDC interrupt number > -- clocks: MSDC source clock, HCLK > -- clock-names: "source", "hclk" > +- clocks: MSDC source clock, HCLK, source_cg > +- clock-names: "source", "hclk", "source_cg" All chips support source_cg? That's not backwards compatible for existing compatible strings if the driver requires it. > - pinctrl-names: should be "default", "state_uhs" > - pinctrl-0: should contain default/high speed pin ctrl > - pinctrl-1: should contain uhs mode pin ctrl > @@ -30,6 +35,8 @@ Optional properties: > - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection > If present,HS400 command responses are sampled on rising edges. > If not present,HS400 command responses are sampled on falling edges. > +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc What's a project? > + error caused by stop clock(fifo full) > > Examples: > mmc0: mmc@11230000 { > -- > 1.8.1.1.dirty >
On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: > On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: > > Change the comptiable for support of multi-platform > > Add description for reg > > Add description for source_cg > > Add description for mediatek,latch-ck > > This is at least the 3rd patch with exactly the same vague subject. > Please make the subject somewhat unique. > Thx, will change the subject at next version > > > > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > > --- > > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- > > 1 file changed, 10 insertions(+), 3 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > index 4182ea3..405cd06 100644 > > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt > > and the properties used by the msdc driver. > > > > Required properties: > > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" > > +- compatible: value should be either of the following. > > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 > > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 > > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 > > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 > > +- reg: physical base address of the controller and length > > - interrupts: Should contain MSDC interrupt number > > -- clocks: MSDC source clock, HCLK > > -- clock-names: "source", "hclk" > > +- clocks: MSDC source clock, HCLK, source_cg > > +- clock-names: "source", "hclk", "source_cg" > > All chips support source_cg? That's not backwards compatible for > existing compatible strings if the driver requires it. Not all chips support source_cg, for chips which do not support source_cg, no need source_cg here, and the driver will parse it to know if current chip support it. > > > - pinctrl-names: should be "default", "state_uhs" > > - pinctrl-0: should contain default/high speed pin ctrl > > - pinctrl-1: should contain uhs mode pin ctrl > > @@ -30,6 +35,8 @@ Optional properties: > > - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection > > If present,HS400 command responses are sampled on rising edges. > > If not present,HS400 command responses are sampled on falling edges. > > +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc > > What's a project? eg, MT2701 > > > + error caused by stop clock(fifo full) > > > > Examples: > > mmc0: mmc@11230000 { > > -- > > 1.8.1.1.dirty > >
On Thu, Sep 14, 2017 at 4:10 AM, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: >> > +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc >> >> What's a project? > eg, MT2701 Replace the word "project" with the word "system" or "SoC" in your patch. Yours, Linus Walleij
On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: >> > Change the comptiable for support of multi-platform >> > Add description for reg >> > Add description for source_cg >> > Add description for mediatek,latch-ck >> >> This is at least the 3rd patch with exactly the same vague subject. >> Please make the subject somewhat unique. >> > Thx, will change the subject at next version >> > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> >> > --- >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- >> > 1 file changed, 10 insertions(+), 3 deletions(-) >> > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt >> > index 4182ea3..405cd06 100644 >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt >> > and the properties used by the msdc driver. >> > >> > Required properties: >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" >> > +- compatible: value should be either of the following. >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 >> > +- reg: physical base address of the controller and length >> > - interrupts: Should contain MSDC interrupt number >> > -- clocks: MSDC source clock, HCLK >> > -- clock-names: "source", "hclk" >> > +- clocks: MSDC source clock, HCLK, source_cg >> > +- clock-names: "source", "hclk", "source_cg" >> >> All chips support source_cg? That's not backwards compatible for >> existing compatible strings if the driver requires it. > Not all chips support source_cg, for chips which do not support > source_cg, no need source_cg here, and the driver will parse it > to know if current chip support it. In such case you must not add add a required binding for it. I think that is what Rob is trying to point out for you. [...] Kind regards Uffe
On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote: > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: > >> > Change the comptiable for support of multi-platform > >> > Add description for reg > >> > Add description for source_cg > >> > Add description for mediatek,latch-ck > >> > >> This is at least the 3rd patch with exactly the same vague subject. > >> Please make the subject somewhat unique. > >> > > Thx, will change the subject at next version > >> > > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > >> > --- > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- > >> > 1 file changed, 10 insertions(+), 3 deletions(-) > >> > > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > >> > index 4182ea3..405cd06 100644 > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt > >> > and the properties used by the msdc driver. > >> > > >> > Required properties: > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" > >> > +- compatible: value should be either of the following. > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 > >> > +- reg: physical base address of the controller and length > >> > - interrupts: Should contain MSDC interrupt number > >> > -- clocks: MSDC source clock, HCLK > >> > -- clock-names: "source", "hclk" > >> > +- clocks: MSDC source clock, HCLK, source_cg > >> > +- clock-names: "source", "hclk", "source_cg" > >> > >> All chips support source_cg? That's not backwards compatible for > >> existing compatible strings if the driver requires it. > > Not all chips support source_cg, for chips which do not support > > source_cg, no need source_cg here, and the driver will parse it > > to know if current chip support it. > > In such case you must not add add a required binding for it. I think > that is what Rob is trying to point out for you. > > [...] > > Kind regards > Uffe The source_cg is required(MUST) at MT2712 and future SoCs, but not required(do not have it) at previous SoCs, so that put it at required properties, let the driver to handle it.
On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote: > On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote: > > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: > > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: > > >> > Change the comptiable for support of multi-platform > > >> > Add description for reg > > >> > Add description for source_cg > > >> > Add description for mediatek,latch-ck > > >> > > >> This is at least the 3rd patch with exactly the same vague subject. > > >> Please make the subject somewhat unique. > > >> > > > Thx, will change the subject at next version > > >> > > > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > > >> > --- > > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- > > >> > 1 file changed, 10 insertions(+), 3 deletions(-) > > >> > > > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > >> > index 4182ea3..405cd06 100644 > > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt > > >> > and the properties used by the msdc driver. > > >> > > > >> > Required properties: > > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" > > >> > +- compatible: value should be either of the following. > > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 > > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 > > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 > > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 > > >> > +- reg: physical base address of the controller and length > > >> > - interrupts: Should contain MSDC interrupt number > > >> > -- clocks: MSDC source clock, HCLK > > >> > -- clock-names: "source", "hclk" > > >> > +- clocks: MSDC source clock, HCLK, source_cg > > >> > +- clock-names: "source", "hclk", "source_cg" > > >> > > >> All chips support source_cg? That's not backwards compatible for > > >> existing compatible strings if the driver requires it. > > > Not all chips support source_cg, for chips which do not support > > > source_cg, no need source_cg here, and the driver will parse it > > > to know if current chip support it. > > > > In such case you must not add add a required binding for it. I think > > that is what Rob is trying to point out for you. > > > > [...] > > > > Kind regards > > Uffe > The source_cg is required(MUST) at MT2712 and future SoCs, but not > required(do not have it) at previous SoCs, so that put it at required > properties, let the driver to handle it. Any other comments about it ? still must not add a required binding for it ? if add a optional binding for it, how to add it ? as cannot duplicate "clocks" & "clock-names" in one node.
[...] >> > >> > Required properties: >> > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" >> > >> > +- compatible: value should be either of the following. >> > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 >> > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 >> > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 >> > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 >> > >> > +- reg: physical base address of the controller and length >> > >> > - interrupts: Should contain MSDC interrupt number >> > >> > -- clocks: MSDC source clock, HCLK >> > >> > -- clock-names: "source", "hclk" >> > >> > +- clocks: MSDC source clock, HCLK, source_cg >> > >> > +- clock-names: "source", "hclk", "source_cg" >> > >> >> > >> All chips support source_cg? That's not backwards compatible for >> > >> existing compatible strings if the driver requires it. >> > > Not all chips support source_cg, for chips which do not support >> > > source_cg, no need source_cg here, and the driver will parse it >> > > to know if current chip support it. >> > >> > In such case you must not add add a required binding for it. I think >> > that is what Rob is trying to point out for you. >> > >> > [...] >> > >> > Kind regards >> > Uffe >> The source_cg is required(MUST) at MT2712 and future SoCs, but not >> required(do not have it) at previous SoCs, so that put it at required >> properties, let the driver to handle it. Then you must explain that in the binding... On 29 September 2017 at 03:56, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote: >> On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote: >> > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote: >> > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: >> > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: >> > >> > Change the comptiable for support of multi-platform >> > >> > Add description for reg >> > >> > Add description for source_cg >> > >> > Add description for mediatek,latch-ck >> > >> >> > >> This is at least the 3rd patch with exactly the same vague subject. >> > >> Please make the subject somewhat unique. >> > >> >> > > Thx, will change the subject at next version >> > >> > >> > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> >> > >> > --- >> > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- >> > >> > 1 file changed, 10 insertions(+), 3 deletions(-) >> > >> > >> > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt >> > >> > index 4182ea3..405cd06 100644 >> > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt >> > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt >> > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt >> > >> > and the properties used by the msdc driver. >> > >> > > > Any other comments about it ? still must not add a required binding for > it ? if add a optional binding for it, how to add it ? as cannot > duplicate "clocks" & "clock-names" in one node. > > I suggest you keep the description of the new clock name part of the "Required properties:" header. However, after each clock name, explicit state when the clock is required/optional. Something along the lines as sdhci-msm does it. Documentation/devicetree/bindings/mmc/sdhci-msm.txt Kind regards Uffe
On Fri, 2017-09-29 at 09:56 +0800, Chaotian Jing wrote: > On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote: > > On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote: > > > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > > > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: > > > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: > > > >> > Change the comptiable for support of multi-platform > > > >> > Add description for reg > > > >> > Add description for source_cg > > > >> > Add description for mediatek,latch-ck > > > >> > > > >> This is at least the 3rd patch with exactly the same vague subject. > > > >> Please make the subject somewhat unique. > > > >> > > > > Thx, will change the subject at next version > > > >> > > > > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > > > >> > --- > > > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- > > > >> > 1 file changed, 10 insertions(+), 3 deletions(-) > > > >> > > > > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > > >> > index 4182ea3..405cd06 100644 > > > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt > > > >> > and the properties used by the msdc driver. > > > >> > > > > >> > Required properties: > > > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" > > > >> > +- compatible: value should be either of the following. > > > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 > > > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 > > > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 > > > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 > > > >> > +- reg: physical base address of the controller and length > > > >> > - interrupts: Should contain MSDC interrupt number > > > >> > -- clocks: MSDC source clock, HCLK > > > >> > -- clock-names: "source", "hclk" > > > >> > +- clocks: MSDC source clock, HCLK, source_cg > > > >> > +- clock-names: "source", "hclk", "source_cg" > > > >> > > > >> All chips support source_cg? That's not backwards compatible for > > > >> existing compatible strings if the driver requires it. > > > > Not all chips support source_cg, for chips which do not support > > > > source_cg, no need source_cg here, and the driver will parse it > > > > to know if current chip support it. > > > > > > In such case you must not add add a required binding for it. I think > > > that is what Rob is trying to point out for you. > > > > > > [...] > > > > > > Kind regards > > > Uffe > > The source_cg is required(MUST) at MT2712 and future SoCs, but not > > required(do not have it) at previous SoCs, so that put it at required > > properties, let the driver to handle it. > > Any other comments about it ? still must not add a required binding for > it ? if add a optional binding for it, how to add it ? as cannot > duplicate "clocks" & "clock-names" in one node. Chaotian, You can follow examples of scpsys [1]: - clock, clock-names: clocks according to the common clock binding. These are clocks which hardware needs to be enabled before enabling certain power domains. Required clocks for MT2701: "mm", "mfg", "ethif" Required clocks for MT6797: "mm", "mfg", "vdec" Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt" [1]: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt?h=v4.13.4 Joe.C
On Mon, 2017-10-02 at 08:53 +0200, Ulf Hansson wrote: > [...] > > >> > >> > Required properties: > >> > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" > >> > >> > +- compatible: value should be either of the following. > >> > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 > >> > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 > >> > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 > >> > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 > >> > >> > +- reg: physical base address of the controller and length > >> > >> > - interrupts: Should contain MSDC interrupt number > >> > >> > -- clocks: MSDC source clock, HCLK > >> > >> > -- clock-names: "source", "hclk" > >> > >> > +- clocks: MSDC source clock, HCLK, source_cg > >> > >> > +- clock-names: "source", "hclk", "source_cg" > >> > >> > >> > >> All chips support source_cg? That's not backwards compatible for > >> > >> existing compatible strings if the driver requires it. > >> > > Not all chips support source_cg, for chips which do not support > >> > > source_cg, no need source_cg here, and the driver will parse it > >> > > to know if current chip support it. > >> > > >> > In such case you must not add add a required binding for it. I think > >> > that is what Rob is trying to point out for you. > >> > > >> > [...] > >> > > >> > Kind regards > >> > Uffe > >> The source_cg is required(MUST) at MT2712 and future SoCs, but not > >> required(do not have it) at previous SoCs, so that put it at required > >> properties, let the driver to handle it. > > Then you must explain that in the binding... > > On 29 September 2017 at 03:56, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > > On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote: > >> On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote: > >> > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > >> > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: > >> > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: > >> > >> > Change the comptiable for support of multi-platform > >> > >> > Add description for reg > >> > >> > Add description for source_cg > >> > >> > Add description for mediatek,latch-ck > >> > >> > >> > >> This is at least the 3rd patch with exactly the same vague subject. > >> > >> Please make the subject somewhat unique. > >> > >> > >> > > Thx, will change the subject at next version > >> > >> > > >> > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > >> > >> > --- > >> > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- > >> > >> > 1 file changed, 10 insertions(+), 3 deletions(-) > >> > >> > > >> > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > >> > >> > index 4182ea3..405cd06 100644 > >> > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt > >> > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > >> > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt > >> > >> > and the properties used by the msdc driver. > >> > >> > > > > > Any other comments about it ? still must not add a required binding for > > it ? if add a optional binding for it, how to add it ? as cannot > > duplicate "clocks" & "clock-names" in one node. > > > > > > I suggest you keep the description of the new clock name part of the > "Required properties:" header. However, after each clock name, > explicit state when the clock is required/optional. Something along > the lines as sdhci-msm does it. > Documentation/devicetree/bindings/mmc/sdhci-msm.txt > > Kind regards > Uffe Thx, I will send a new series of patch v2 to review.
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt index 4182ea3..405cd06 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt and the properties used by the msdc driver. Required properties: -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" +- compatible: value should be either of the following. + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 +- reg: physical base address of the controller and length - interrupts: Should contain MSDC interrupt number -- clocks: MSDC source clock, HCLK -- clock-names: "source", "hclk" +- clocks: MSDC source clock, HCLK, source_cg +- clock-names: "source", "hclk", "source_cg" - pinctrl-names: should be "default", "state_uhs" - pinctrl-0: should contain default/high speed pin ctrl - pinctrl-1: should contain uhs mode pin ctrl @@ -30,6 +35,8 @@ Optional properties: - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection If present,HS400 command responses are sampled on rising edges. If not present,HS400 command responses are sampled on falling edges. +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc + error caused by stop clock(fifo full) Examples: mmc0: mmc@11230000 {
Change the comptiable for support of multi-platform Add description for reg Add description for source_cg Add description for mediatek,latch-ck Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> --- Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)