[v3] iio: dac: ds4422/ds4424 dac driver
diff mbox

Message ID 20170918221029.3610-1-Ismail.Kose@maximintegrated.com
State New
Headers show

Commit Message

Ismail Kose Sept. 18, 2017, 10:09 p.m. UTC
From: "Ismail H. Kose" <ihkose@gmail.com>

This patch provides an iio device driver for DS4422/DS4424 chips that support
two/four channel 7-bit Sink/Source Current DAC.

Signed-off-by: Ismail Kose <Ismail.Kose@maximintegrated.com>
---
v3:
	* Removed iio-map and platform file support
	* Removed ds4424.h file
	* Fixed ADC value read bug
	* Removed confused comments
	* Added device tree binding file
	* Fixed bugs in probe and read function

v2: (https://lkml.org/lkml/2017/9/14/546)
	* Fixed coding style and removed unncessary code
	* Removed min/max rfs, ifs-scale, etc values from device tree
	* Removed unused code, definitions and some comments
	* Removed regulator control and made standard structure
	* Removed data processing and channel scale
	* Removed device tree binding file

 .../devicetree/bindings/iio/dac/ds4424.txt         |  20 ++
 drivers/iio/dac/Kconfig                            |   9 +
 drivers/iio/dac/Makefile                           |   1 +
 drivers/iio/dac/ds4424.c                           | 399 +++++++++++++++++++++
 4 files changed, 429 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/dac/ds4424.txt
 create mode 100644 drivers/iio/dac/ds4424.c

Comments

Peter Meerwald-Stadler Sept. 19, 2017, 4:48 a.m. UTC | #1
> This patch provides an iio device driver for DS4422/DS4424 chips that support
> two/four channel 7-bit Sink/Source Current DAC.

some more minor comments below
 
> Signed-off-by: Ismail Kose <Ismail.Kose@maximintegrated.com>
> ---
> v3:
> 	* Removed iio-map and platform file support
> 	* Removed ds4424.h file
> 	* Fixed ADC value read bug
> 	* Removed confused comments
> 	* Added device tree binding file
> 	* Fixed bugs in probe and read function
> 
> v2: (https://lkml.org/lkml/2017/9/14/546)
> 	* Fixed coding style and removed unncessary code
> 	* Removed min/max rfs, ifs-scale, etc values from device tree
> 	* Removed unused code, definitions and some comments
> 	* Removed regulator control and made standard structure
> 	* Removed data processing and channel scale
> 	* Removed device tree binding file
> 
>  .../devicetree/bindings/iio/dac/ds4424.txt         |  20 ++
>  drivers/iio/dac/Kconfig                            |   9 +
>  drivers/iio/dac/Makefile                           |   1 +
>  drivers/iio/dac/ds4424.c                           | 399 +++++++++++++++++++++
>  4 files changed, 429 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/dac/ds4424.txt
>  create mode 100644 drivers/iio/dac/ds4424.c
> 
> diff --git a/Documentation/devicetree/bindings/iio/dac/ds4424.txt b/Documentation/devicetree/bindings/iio/dac/ds4424.txt
> new file mode 100644
> index 000000000000..840b11e1d813
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/dac/ds4424.txt
> @@ -0,0 +1,20 @@
> +Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC Device Driver
> +
> +Datasheet publicly available at:
> +https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf
> +
> +Required properties:
> +	- compatible: Must be "maxim,ds4422" or "maxim,ds4424"
> +	- reg: Should contain the DAC I2C address
> +	- maxim,rfs-resistors-ohms: Should contain reference resistor
> +
> +Optional properties:
> +	- vcc-supply: Power supply is optional. If not defined, driver will ignore it.
> +
> +Example:
> +	ds4224@10 {
> +		compatible = "maxim,ds4424";
> +		reg = <0x10>; /* When A0, A1 pins are ground */
> +		vcc-supply = "dac_vcc_3v3";
> +		maxim,rfs-resistors-ohms = <400 800 1000 1600>;
> +	};
> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> index 25bed2d7d2b9..db6ceba1c76f 100644
> --- a/drivers/iio/dac/Kconfig
> +++ b/drivers/iio/dac/Kconfig
> @@ -310,4 +310,13 @@ config VF610_DAC
>  	  This driver can also be built as a module. If so, the module will
>  	  be called vf610_dac.
>  
> +config DS4424
> +	tristate "Maxim Integrated DS4422/DS4424 DAC driver"
> +	depends on I2C
> +	help
> +	  If you say yes here you get support for Maxim chips DS4422, DS4424.
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called ds4424.

alphabetic order please

 +
>  endmenu
> diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
> index 603587cc2f07..f29f929a0587 100644
> --- a/drivers/iio/dac/Makefile
> +++ b/drivers/iio/dac/Makefile
> @@ -33,3 +33,4 @@ obj-$(CONFIG_MCP4922) += mcp4922.o
>  obj-$(CONFIG_STM32_DAC_CORE) += stm32-dac-core.o
>  obj-$(CONFIG_STM32_DAC) += stm32-dac.o
>  obj-$(CONFIG_VF610_DAC) += vf610_dac.o
> +obj-$(CONFIG_DS4424) += ds4424.o

alphabetic order please

> diff --git a/drivers/iio/dac/ds4424.c b/drivers/iio/dac/ds4424.c
> new file mode 100644
> index 000000000000..46ae28081cf0
> --- /dev/null
> +++ b/drivers/iio/dac/ds4424.c
> @@ -0,0 +1,399 @@
> +/*
> + * Maxim Integrated
> + * 7-bit, Multi-Channel Sink/Source Current DAC Driver
> + * Copyright (C) 2017 Maxim Integrated
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/err.h>
> +#include <linux/delay.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/driver.h>
> +#include <linux/iio/machine.h>
> +#include <linux/iio/consumer.h>
> +
> +#define DS4422_MAX_DAC_CHANNELS		2
> +#define DS4424_MAX_DAC_CHANNELS		4
> +
> +#define DS4424_DAC_ADDR(chan)   ((chan) + 0xf8)
> +#define DS4424_SOURCE_I		1
> +#define DS4424_SINK_I		0
> +
> +#define DS4424_CHANNEL(chan) { \
> +	.type = IIO_CURRENT, \
> +	.indexed = 1, \
> +	.output = 1, \
> +	.channel = chan, \
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> +	.address = DS4424_DAC_ADDR(chan), \

.address is not used

> +}
> +
> +/*
> + * DS4424 DAC control register 8 bits
> + * [7]		0: to sink; 1: to source
> + * [6:0]	steps to sink/source
> + * bit[7] looks like a sign bit, but the value of the register is
> + * not a two's complement code considering the bit[6:0] is a absolute
> + * distance from the zero point.
> + */
> +union ds4424_raw_data {
> +	struct {
> +		u8 dx:7;
> +		u8 source_bit:1;
> +	};
> +	u8 bits;
> +};
> +
> +enum ds4424_device_ids {
> +	ID_DS4422,
> +	ID_DS4424,
> +};
> +
> +struct ds4424_data {
> +	struct i2c_client *client;
> +	struct mutex lock;
> +	__maybe_unused uint16_t save[DS4424_MAX_DAC_CHANNELS];

save should ba uint8_t as well (to match raw)

> +	uint32_t rfs_res[DS4424_MAX_DAC_CHANNELS];
> +	struct regulator *vcc_reg;
> +	uint8_t raw[DS4424_MAX_DAC_CHANNELS];
> +};
> +
> +static const struct iio_chan_spec ds4424_channels[] = {
> +	DS4424_CHANNEL(0),
> +	DS4424_CHANNEL(1),
> +	DS4424_CHANNEL(2),
> +	DS4424_CHANNEL(3),
> +};
> +
> +static int ds4424_get_value(struct iio_dev *indio_dev,
> +			     int *val, int channel)
> +{
> +	struct ds4424_data *data = iio_priv(indio_dev);
> +	int ret;
> +
> +	mutex_lock(&data->lock);
> +	ret = i2c_smbus_read_byte_data(data->client, DS4424_DAC_ADDR(channel));
> +	if (ret < 0)
> +		goto fail;
> +
> +	*val = ret;
> +	mutex_unlock(&data->lock);
> +	return 0;
> +
> +fail:
> +	mutex_unlock(&data->lock);
> +	return ret;
> +}
> +
> +static int ds4424_set_value(struct iio_dev *indio_dev,
> +			     int val, struct iio_chan_spec const *chan)
> +{
> +	struct ds4424_data *data = iio_priv(indio_dev);
> +	int ret;
> +
> +	if (val < 0 || val > U8_MAX)
> +		return -EINVAL;

the check here is not necessary, _write_raw() already does the check

> +
> +	mutex_lock(&data->lock);
> +	ret = i2c_smbus_write_byte_data(data->client,
> +			DS4424_DAC_ADDR(chan->channel), val);
> +	if (ret < 0) {
> +		mutex_unlock(&data->lock);
> +		return ret;
> +	}
> +
> +	data->raw[chan->channel] = val;
> +	mutex_unlock(&data->lock);
> +
> +	return 0;
> +}
> +
> +static int ds4424_read_raw(struct iio_dev *indio_dev,
> +			   struct iio_chan_spec const *chan,
> +			   int *val, int *val2, long mask)
> +{
> +	union ds4424_raw_data raw;
> +	int ret;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		ret = ds4424_get_value(indio_dev, val, chan->channel);
> +		if (ret < 0) {
> +			pr_err("%s : ds4424_get_value returned %d\n",
> +							__func__, ret);
> +			return ret;
> +		}
> +		raw.bits = *val;
> +		*val = raw.dx;
> +		if (raw.source_bit == DS4424_SINK_I)
> +			*val = -*val;
> +		return IIO_VAL_INT;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int ds4424_write_raw(struct iio_dev *indio_dev,
> +			     struct iio_chan_spec const *chan,
> +			     int val, int val2, long mask)
> +{
> +	union ds4424_raw_data raw;
> +
> +	if (val2 != 0)
> +		return -EINVAL;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		if (val < S8_MIN || val > S8_MAX)

no, S8_MAX and S8_MIN is 127 and -128, resp.
-128 is wront, should be -127 I think


> +			return -EINVAL;
> +
> +		if (val > 0) {
> +			raw.source_bit = DS4424_SOURCE_I;
> +			raw.dx = val;
> +		} else {
> +			raw.source_bit = DS4424_SINK_I;
> +			raw.dx = -val;
> +		}
> +
> +		return ds4424_set_value(indio_dev, raw.bits, chan);
> +
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int ds4424_verify_chip(struct iio_dev *indio_dev)
> +{
> +	int ret = 0, val;

no need to init ret

> +
> +	ret = ds4424_get_value(indio_dev, &val, DS4424_DAC_ADDR(0));
> +	if (ret < 0)
> +		dev_err(&indio_dev->dev,
> +				"%s failed. ret: %d\n", __func__, ret);
> +
> +	return ret;
> +}
> +
> +static int __maybe_unused ds4424_suspend(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +	struct ds4424_data *data = iio_priv(indio_dev);
> +	int ret = 0;
> +	int i;
> +
> +	for (i = 0; i < indio_dev->num_channels; i++) {
> +		data->save[i] = data->raw[i];
> +		ret = ds4424_set_value(indio_dev, 0,
> +				&indio_dev->channels[i]);
> +		if (ret < 0)
> +			return ret;
> +	}
> +	return ret;
> +}
> +
> +static int __maybe_unused ds4424_resume(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +	struct ds4424_data *data = iio_priv(indio_dev);
> +	int ret = 0;
> +	int i;
> +
> +	for (i = 0; i < indio_dev->num_channels; i++) {
> +		ret = ds4424_set_value(indio_dev, data->save[i],
> +				&indio_dev->channels[i]);
> +		if (ret < 0)
> +			return ret;
> +	}
> +	return ret;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(ds4424_pm_ops, ds4424_suspend, ds4424_resume);
> +
> +static const struct iio_info ds4424_info = {
> +	.read_raw = ds4424_read_raw,
> +	.write_raw = ds4424_write_raw,
> +};
> +
> +#ifdef CONFIG_OF
> +static int ds4424_parse_dt(struct iio_dev *indio_dev)
> +{
> +	int ret;
> +	int len;
> +	int count;
> +	struct property *prop;
> +	struct ds4424_data *data = iio_priv(indio_dev);
> +	struct device_node *node = indio_dev->dev.of_node;
> +
> +	if (!node) {
> +		pr_info("%s:%d ds4424 DT not found\n", __func__, __LINE__);
> +		return -ENODEV;
> +	}
> +
> +	prop = of_find_property(node, "maxim,rfs-resistors-ohms", &len);
> +	if (!prop) {
> +		pr_err("ds4424 maxim,rfs-resistor not found in DT.\n");
> +		return -EINVAL;
> +	}
> +
> +	if (len != (DS4424_MAX_DAC_CHANNELS * sizeof(uint32_t))) {
> +		pr_err("ds4424 maxim,rfs-resistor length in DT not valid.\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = of_property_read_u32_array(node, "maxim,rfs-resistors-ohms",
> +				 data->rfs_res, DS4424_MAX_DAC_CHANNELS);
> +	if (ret < 0) {
> +		pr_err("ds4424 reading maxim,rfs-resistors from DT failed.\n");
> +		return ret;
> +	}
> +
> +	pr_info("ds4424 maxim,rfs-resistors: %d, %d, %d, %d\n",
> +			data->rfs_res[0], data->rfs_res[1],
> +			data->rfs_res[2], data->rfs_res[3]);
> +
> +	return 0;
> +}
> +#else
> +static int ds4424_parse_dt(struct iio_dev *indio_dev)
> +{
> +	return -ENODEV;
> +}
> +#endif
> +
> +static int ds4424_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	struct ds4424_data *data;
> +	struct iio_dev *indio_dev;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> +	if (!indio_dev) {
> +		dev_err(&client->dev, "iio dev alloc failed.\n");
> +		return -ENOMEM;
> +	}
> +
> +	data = iio_priv(indio_dev);
> +	i2c_set_clientdata(client, indio_dev);
> +	data->client = client;
> +	indio_dev->name = id->name;
> +	indio_dev->dev.of_node = client->dev.of_node;
> +	indio_dev->dev.parent = &client->dev;
> +
> +	if (!client->dev.of_node) {
> +		dev_err(&client->dev,
> +				"Not found DT.\n");
> +		return -EPERM;
> +	}
> +
> +	indio_dev->dev.of_node = client->dev.of_node;
> +	ret = ds4424_parse_dt(indio_dev);
> +	if (ret < 0) {
> +		dev_err(&client->dev,
> +				"%s - of_node error\n", __func__);
> +		return -EINVAL;
> +	}
> +
> +	data->vcc_reg = devm_regulator_get(&client->dev, "vcc");
> +	if (IS_ERR(data->vcc_reg)) {
> +		ret = PTR_ERR(data->vcc_reg);
> +		dev_err(&client->dev,
> +			"Failed to get vcc-supply regulator: %d\n", ret);
> +		return ret;
> +	}
> +
> +	mutex_init(&data->lock);
> +	ret = regulator_enable(data->vcc_reg);
> +	if (ret < 0) {
> +		dev_err(&client->dev,
> +				"Unable to enable the regulator.\n");
> +		return ret;
> +	}
> +
> +	usleep_range(1000, 1200);
> +	ret = ds4424_verify_chip(indio_dev);
> +	if (ret < 0)
> +		return -ENXIO;
> +
> +	switch (id->driver_data) {
> +	case ID_DS4422:
> +		indio_dev->num_channels = DS4422_MAX_DAC_CHANNELS;
> +		break;
> +	case ID_DS4424:
> +		indio_dev->num_channels = DS4424_MAX_DAC_CHANNELS;
> +		break;
> +	default:
> +		dev_err(&client->dev,
> +				"ds4424: Invalid chip id.\n");
> +		regulator_disable(data->vcc_reg);
> +		return -ENXIO;
> +	}
> +
> +	indio_dev->channels = ds4424_channels;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->info = &ds4424_info;
> +
> +	ret = iio_device_register(indio_dev);
> +	if (ret < 0) {
> +		dev_err(&client->dev,
> +				"iio_device_register failed. ret: %d\n", ret);
> +		regulator_disable(data->vcc_reg);
> +	}
> +
> +	return ret;
> +}
> +
> +static int ds4424_remove(struct i2c_client *client)
> +{
> +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +	struct ds4424_data *data = iio_priv(indio_dev);
> +
> +	iio_device_unregister(indio_dev);
> +	regulator_disable(data->vcc_reg);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id ds4424_id[] = {
> +	{ "ds4422", ID_DS4422 },
> +	{ "ds4424", ID_DS4424 },
> +	{ }
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, ds4424_id);
> +
> +static const struct of_device_id ds4424_of_match[] = {
> +	{ .compatible = "maxim,ds4422" },
> +	{ .compatible = "maxim,ds4424" },
> +	{ },
> +};
> +
> +MODULE_DEVICE_TABLE(of, ds4424_of_match);
> +
> +static struct i2c_driver ds4424_driver = {
> +	.driver = {
> +		.name	= "ds4424",
> +		.of_match_table = ds4424_of_match,
> +		.pm     = &ds4424_pm_ops,
> +	},
> +	.probe		= ds4424_probe,
> +	.remove		= ds4424_remove,
> +	.id_table	= ds4424_id,
> +};
> +module_i2c_driver(ds4424_driver);
> +
> +MODULE_DESCRIPTION("Maxim DS4424 DAC Driver");
> +MODULE_AUTHOR("Ismail H. Kose <ismail.kose@maximintegrated.com>");
> +MODULE_AUTHOR("Vishal Sood <vishal.sood@maximintegrated.com>");
> +MODULE_AUTHOR("David Jung <david.jung@maximintegrated.com>");
> +MODULE_LICENSE("GPL v2");
>
Ismail Kose Sept. 19, 2017, 6:24 a.m. UTC | #2
You can find my reply to one of your comments below. 

> -----Original Message-----
> From: Peter Meerwald-Stadler [mailto:pmeerw@pmeerw.net]
> Sent: Monday, September 18, 2017 9:49 PM
> To: Ismail Kose <Ismail.Kose@maximintegrated.com>
> Cc: ihkose@gmail.com; Jonathan Cameron <jic23@kernel.org>; Hartmut
> Knaack <knaack.h@gmx.de>; Lars-Peter Clausen <lars@metafoo.de>; Rob
> Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>;
> Maxime Roussin-Belanger <maxime.roussinbelanger@gmail.com>; Mike
> Looijmans <mike.looijmans@topic.nl>; Peter Rosin <peda@axentia.se>;
> Fabrice Gasnier <fabrice.gasnier@st.com>; Jean-Francois Dagenais
> <jeff.dagenais@gmail.com>; linux-iio@vger.kernel.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v3] iio: dac: ds4422/ds4424 dac driver
> 
> EXTERNAL EMAIL
> 
> 
> 
> > This patch provides an iio device driver for DS4422/DS4424 chips that
> > support two/four channel 7-bit Sink/Source Current DAC.
> 
> some more minor comments below
> 
> > Signed-off-by: Ismail Kose <Ismail.Kose@maximintegrated.com>
> > ---
> > v3:
> >       * Removed iio-map and platform file support
> >       * Removed ds4424.h file
> >       * Fixed ADC value read bug
> >       * Removed confused comments
> >       * Added device tree binding file
> >       * Fixed bugs in probe and read function
> >
> > v2:
> (https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flkml.
> org%2Flkml%2F2017%2F9%2F14%2F546&data=01%7C01%7CIsmail.Kose%40
> maximintegrated.com%7C1bb4c28e4d3642f3ccc508d4ff19aecb%7Cfbd909dfe
> a694788a554f24b7854ad03%7C0&sdata=ICps6DntgtUajBSjXi%2BH4oM1iFq3ia
> Wdq9aubdpU2wI%3D&reserved=0)
> >       * Fixed coding style and removed unncessary code
> >       * Removed min/max rfs, ifs-scale, etc values from device tree
> >       * Removed unused code, definitions and some comments
> >       * Removed regulator control and made standard structure
> >       * Removed data processing and channel scale
> >       * Removed device tree binding file
> >
> >  .../devicetree/bindings/iio/dac/ds4424.txt         |  20 ++
> >  drivers/iio/dac/Kconfig                            |   9 +
> >  drivers/iio/dac/Makefile                           |   1 +
> >  drivers/iio/dac/ds4424.c                           | 399 +++++++++++++++++++++
> >  4 files changed, 429 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/iio/dac/ds4424.txt
> >  create mode 100644 drivers/iio/dac/ds4424.c
> >
> > diff --git a/Documentation/devicetree/bindings/iio/dac/ds4424.txt
> > b/Documentation/devicetree/bindings/iio/dac/ds4424.txt
> > new file mode 100644
> > index 000000000000..840b11e1d813
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/dac/ds4424.txt
> > @@ -0,0 +1,20 @@
> > +Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC Device
> > +Driver
> > +
> > +Datasheet publicly available at:
> >
> +https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdata
> > +sheets.maximintegrated.com%2Fen%2Fds%2FDS4422-
> DS4424.pdf&data=01%7C01
> >
> +%7CIsmail.Kose%40maximintegrated.com%7C1bb4c28e4d3642f3ccc508d4ff
> 19ae
> >
> +cb%7Cfbd909dfea694788a554f24b7854ad03%7C0&sdata=QhkGknhcRzCmek
> %2B4Vul
> > +6gCOO8QVNMWSAzz71tP5boTc%3D&reserved=0
> > +
> > +Required properties:
> > +     - compatible: Must be "maxim,ds4422" or "maxim,ds4424"
> > +     - reg: Should contain the DAC I2C address
> > +     - maxim,rfs-resistors-ohms: Should contain reference resistor
> > +
> > +Optional properties:
> > +     - vcc-supply: Power supply is optional. If not defined, driver will ignore
> it.
> > +
> > +Example:
> > +     ds4224@10 {
> > +             compatible = "maxim,ds4424";
> > +             reg = <0x10>; /* When A0, A1 pins are ground */
> > +             vcc-supply = "dac_vcc_3v3";
> > +             maxim,rfs-resistors-ohms = <400 800 1000 1600>;
> > +     };
> > diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index
> > 25bed2d7d2b9..db6ceba1c76f 100644
> > --- a/drivers/iio/dac/Kconfig
> > +++ b/drivers/iio/dac/Kconfig
> > @@ -310,4 +310,13 @@ config VF610_DAC
> >         This driver can also be built as a module. If so, the module will
> >         be called vf610_dac.
> >
> > +config DS4424
> > +     tristate "Maxim Integrated DS4422/DS4424 DAC driver"
> > +     depends on I2C
> > +     help
> > +       If you say yes here you get support for Maxim chips DS4422, DS4424.
> > +
> > +       This driver can also be built as a module.  If so, the module
> > +       will be called ds4424.
> 
> alphabetic order please
> 
>  +
> >  endmenu
> > diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index
> > 603587cc2f07..f29f929a0587 100644
> > --- a/drivers/iio/dac/Makefile
> > +++ b/drivers/iio/dac/Makefile
> > @@ -33,3 +33,4 @@ obj-$(CONFIG_MCP4922) += mcp4922.o
> >  obj-$(CONFIG_STM32_DAC_CORE) += stm32-dac-core.o
> >  obj-$(CONFIG_STM32_DAC) += stm32-dac.o
> >  obj-$(CONFIG_VF610_DAC) += vf610_dac.o
> > +obj-$(CONFIG_DS4424) += ds4424.o
> 
> alphabetic order please
> 
> > diff --git a/drivers/iio/dac/ds4424.c b/drivers/iio/dac/ds4424.c new
> > file mode 100644 index 000000000000..46ae28081cf0
> > --- /dev/null
> > +++ b/drivers/iio/dac/ds4424.c
> > @@ -0,0 +1,399 @@
> > +/*
> > + * Maxim Integrated
> > + * 7-bit, Multi-Channel Sink/Source Current DAC Driver
> > + * Copyright (C) 2017 Maxim Integrated
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/i2c.h>
> > +#include <linux/regulator/consumer.h> #include <linux/err.h> #include
> > +<linux/delay.h> #include <linux/iio/iio.h> #include
> > +<linux/iio/driver.h> #include <linux/iio/machine.h> #include
> > +<linux/iio/consumer.h>
> > +
> > +#define DS4422_MAX_DAC_CHANNELS              2
> > +#define DS4424_MAX_DAC_CHANNELS              4
> > +
> > +#define DS4424_DAC_ADDR(chan)   ((chan) + 0xf8)
> > +#define DS4424_SOURCE_I              1
> > +#define DS4424_SINK_I                0
> > +
> > +#define DS4424_CHANNEL(chan) { \
> > +     .type = IIO_CURRENT, \
> > +     .indexed = 1, \
> > +     .output = 1, \
> > +     .channel = chan, \
> > +     .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> > +     .address = DS4424_DAC_ADDR(chan), \
> 
> .address is not used
> 
> > +}
> > +
> > +/*
> > + * DS4424 DAC control register 8 bits
> > + * [7]               0: to sink; 1: to source
> > + * [6:0]     steps to sink/source
> > + * bit[7] looks like a sign bit, but the value of the register is
> > + * not a two's complement code considering the bit[6:0] is a absolute
> > + * distance from the zero point.
> > + */
> > +union ds4424_raw_data {
> > +     struct {
> > +             u8 dx:7;
> > +             u8 source_bit:1;
> > +     };
> > +     u8 bits;
> > +};
> > +
> > +enum ds4424_device_ids {
> > +     ID_DS4422,
> > +     ID_DS4424,
> > +};
> > +
> > +struct ds4424_data {
> > +     struct i2c_client *client;
> > +     struct mutex lock;
> > +     __maybe_unused uint16_t save[DS4424_MAX_DAC_CHANNELS];
> 
> save should ba uint8_t as well (to match raw)
> 
> > +     uint32_t rfs_res[DS4424_MAX_DAC_CHANNELS];
> > +     struct regulator *vcc_reg;
> > +     uint8_t raw[DS4424_MAX_DAC_CHANNELS]; };
> > +
> > +static const struct iio_chan_spec ds4424_channels[] = {
> > +     DS4424_CHANNEL(0),
> > +     DS4424_CHANNEL(1),
> > +     DS4424_CHANNEL(2),
> > +     DS4424_CHANNEL(3),
> > +};
> > +
> > +static int ds4424_get_value(struct iio_dev *indio_dev,
> > +                          int *val, int channel) {
> > +     struct ds4424_data *data = iio_priv(indio_dev);
> > +     int ret;
> > +
> > +     mutex_lock(&data->lock);
> > +     ret = i2c_smbus_read_byte_data(data->client,
> DS4424_DAC_ADDR(channel));
> > +     if (ret < 0)
> > +             goto fail;
> > +
> > +     *val = ret;
> > +     mutex_unlock(&data->lock);
> > +     return 0;
> > +
> > +fail:
> > +     mutex_unlock(&data->lock);
> > +     return ret;
> > +}
> > +
> > +static int ds4424_set_value(struct iio_dev *indio_dev,
> > +                          int val, struct iio_chan_spec const *chan)
> > +{
> > +     struct ds4424_data *data = iio_priv(indio_dev);
> > +     int ret;
> > +
> > +     if (val < 0 || val > U8_MAX)
> > +             return -EINVAL;
> 
> the check here is not necessary, _write_raw() already does the check
> 
> > +
> > +     mutex_lock(&data->lock);
> > +     ret = i2c_smbus_write_byte_data(data->client,
> > +                     DS4424_DAC_ADDR(chan->channel), val);
> > +     if (ret < 0) {
> > +             mutex_unlock(&data->lock);
> > +             return ret;
> > +     }
> > +
> > +     data->raw[chan->channel] = val;
> > +     mutex_unlock(&data->lock);
> > +
> > +     return 0;
> > +}
> > +
> > +static int ds4424_read_raw(struct iio_dev *indio_dev,
> > +                        struct iio_chan_spec const *chan,
> > +                        int *val, int *val2, long mask) {
> > +     union ds4424_raw_data raw;
> > +     int ret;
> > +
> > +     switch (mask) {
> > +     case IIO_CHAN_INFO_RAW:
> > +             ret = ds4424_get_value(indio_dev, val, chan->channel);
> > +             if (ret < 0) {
> > +                     pr_err("%s : ds4424_get_value returned %d\n",
> > +                                                     __func__, ret);
> > +                     return ret;
> > +             }
> > +             raw.bits = *val;
> > +             *val = raw.dx;
> > +             if (raw.source_bit == DS4424_SINK_I)
> > +                     *val = -*val;
> > +             return IIO_VAL_INT;
> > +
> > +     default:
> > +             return -EINVAL;
> > +     }
> > +}
> > +
> > +static int ds4424_write_raw(struct iio_dev *indio_dev,
> > +                          struct iio_chan_spec const *chan,
> > +                          int val, int val2, long mask) {
> > +     union ds4424_raw_data raw;
> > +
> > +     if (val2 != 0)
> > +             return -EINVAL;
> > +
> > +     switch (mask) {
> > +     case IIO_CHAN_INFO_RAW:
> > +             if (val < S8_MIN || val > S8_MAX)
> 
> no, S8_MAX and S8_MIN is 127 and -128, resp.
> -128 is wront, should be -127 I think

-128 is acceptable input for the function.
0 and -128 both will have output current zero.
This should be right.

> 
> 
> > +                     return -EINVAL;
> > +
> > +             if (val > 0) {
> > +                     raw.source_bit = DS4424_SOURCE_I;
> > +                     raw.dx = val;
> > +             } else {
> > +                     raw.source_bit = DS4424_SINK_I;
> > +                     raw.dx = -val;
> > +             }
> > +
> > +             return ds4424_set_value(indio_dev, raw.bits, chan);
> > +
> > +     default:
> > +             return -EINVAL;
> > +     }
> > +}
> > +
> > +static int ds4424_verify_chip(struct iio_dev *indio_dev) {
> > +     int ret = 0, val;
> 
> no need to init ret
> 
> > +
> > +     ret = ds4424_get_value(indio_dev, &val, DS4424_DAC_ADDR(0));
> > +     if (ret < 0)
> > +             dev_err(&indio_dev->dev,
> > +                             "%s failed. ret: %d\n", __func__, ret);
> > +
> > +     return ret;
> > +}
> > +
> > +static int __maybe_unused ds4424_suspend(struct device *dev) {
> > +     struct i2c_client *client = to_i2c_client(dev);
> > +     struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > +     struct ds4424_data *data = iio_priv(indio_dev);
> > +     int ret = 0;
> > +     int i;
> > +
> > +     for (i = 0; i < indio_dev->num_channels; i++) {
> > +             data->save[i] = data->raw[i];
> > +             ret = ds4424_set_value(indio_dev, 0,
> > +                             &indio_dev->channels[i]);
> > +             if (ret < 0)
> > +                     return ret;
> > +     }
> > +     return ret;
> > +}
> > +
> > +static int __maybe_unused ds4424_resume(struct device *dev) {
> > +     struct i2c_client *client = to_i2c_client(dev);
> > +     struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > +     struct ds4424_data *data = iio_priv(indio_dev);
> > +     int ret = 0;
> > +     int i;
> > +
> > +     for (i = 0; i < indio_dev->num_channels; i++) {
> > +             ret = ds4424_set_value(indio_dev, data->save[i],
> > +                             &indio_dev->channels[i]);
> > +             if (ret < 0)
> > +                     return ret;
> > +     }
> > +     return ret;
> > +}
> > +
> > +static SIMPLE_DEV_PM_OPS(ds4424_pm_ops, ds4424_suspend,
> > +ds4424_resume);
> > +
> > +static const struct iio_info ds4424_info = {
> > +     .read_raw = ds4424_read_raw,
> > +     .write_raw = ds4424_write_raw,
> > +};
> > +
> > +#ifdef CONFIG_OF
> > +static int ds4424_parse_dt(struct iio_dev *indio_dev) {
> > +     int ret;
> > +     int len;
> > +     int count;
> > +     struct property *prop;
> > +     struct ds4424_data *data = iio_priv(indio_dev);
> > +     struct device_node *node = indio_dev->dev.of_node;
> > +
> > +     if (!node) {
> > +             pr_info("%s:%d ds4424 DT not found\n", __func__, __LINE__);
> > +             return -ENODEV;
> > +     }
> > +
> > +     prop = of_find_property(node, "maxim,rfs-resistors-ohms", &len);
> > +     if (!prop) {
> > +             pr_err("ds4424 maxim,rfs-resistor not found in DT.\n");
> > +             return -EINVAL;
> > +     }
> > +
> > +     if (len != (DS4424_MAX_DAC_CHANNELS * sizeof(uint32_t))) {
> > +             pr_err("ds4424 maxim,rfs-resistor length in DT not valid.\n");
> > +             return -EINVAL;
> > +     }
> > +
> > +     ret = of_property_read_u32_array(node, "maxim,rfs-resistors-ohms",
> > +                              data->rfs_res, DS4424_MAX_DAC_CHANNELS);
> > +     if (ret < 0) {
> > +             pr_err("ds4424 reading maxim,rfs-resistors from DT failed.\n");
> > +             return ret;
> > +     }
> > +
> > +     pr_info("ds4424 maxim,rfs-resistors: %d, %d, %d, %d\n",
> > +                     data->rfs_res[0], data->rfs_res[1],
> > +                     data->rfs_res[2], data->rfs_res[3]);
> > +
> > +     return 0;
> > +}
> > +#else
> > +static int ds4424_parse_dt(struct iio_dev *indio_dev) {
> > +     return -ENODEV;
> > +}
> > +#endif
> > +
> > +static int ds4424_probe(struct i2c_client *client,
> > +                     const struct i2c_device_id *id) {
> > +     struct ds4424_data *data;
> > +     struct iio_dev *indio_dev;
> > +     int ret;
> > +
> > +     indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> > +     if (!indio_dev) {
> > +             dev_err(&client->dev, "iio dev alloc failed.\n");
> > +             return -ENOMEM;
> > +     }
> > +
> > +     data = iio_priv(indio_dev);
> > +     i2c_set_clientdata(client, indio_dev);
> > +     data->client = client;
> > +     indio_dev->name = id->name;
> > +     indio_dev->dev.of_node = client->dev.of_node;
> > +     indio_dev->dev.parent = &client->dev;
> > +
> > +     if (!client->dev.of_node) {
> > +             dev_err(&client->dev,
> > +                             "Not found DT.\n");
> > +             return -EPERM;
> > +     }
> > +
> > +     indio_dev->dev.of_node = client->dev.of_node;
> > +     ret = ds4424_parse_dt(indio_dev);
> > +     if (ret < 0) {
> > +             dev_err(&client->dev,
> > +                             "%s - of_node error\n", __func__);
> > +             return -EINVAL;
> > +     }
> > +
> > +     data->vcc_reg = devm_regulator_get(&client->dev, "vcc");
> > +     if (IS_ERR(data->vcc_reg)) {
> > +             ret = PTR_ERR(data->vcc_reg);
> > +             dev_err(&client->dev,
> > +                     "Failed to get vcc-supply regulator: %d\n", ret);
> > +             return ret;
> > +     }
> > +
> > +     mutex_init(&data->lock);
> > +     ret = regulator_enable(data->vcc_reg);
> > +     if (ret < 0) {
> > +             dev_err(&client->dev,
> > +                             "Unable to enable the regulator.\n");
> > +             return ret;
> > +     }
> > +
> > +     usleep_range(1000, 1200);
> > +     ret = ds4424_verify_chip(indio_dev);
> > +     if (ret < 0)
> > +             return -ENXIO;
> > +
> > +     switch (id->driver_data) {
> > +     case ID_DS4422:
> > +             indio_dev->num_channels = DS4422_MAX_DAC_CHANNELS;
> > +             break;
> > +     case ID_DS4424:
> > +             indio_dev->num_channels = DS4424_MAX_DAC_CHANNELS;
> > +             break;
> > +     default:
> > +             dev_err(&client->dev,
> > +                             "ds4424: Invalid chip id.\n");
> > +             regulator_disable(data->vcc_reg);
> > +             return -ENXIO;
> > +     }
> > +
> > +     indio_dev->channels = ds4424_channels;
> > +     indio_dev->modes = INDIO_DIRECT_MODE;
> > +     indio_dev->info = &ds4424_info;
> > +
> > +     ret = iio_device_register(indio_dev);
> > +     if (ret < 0) {
> > +             dev_err(&client->dev,
> > +                             "iio_device_register failed. ret: %d\n", ret);
> > +             regulator_disable(data->vcc_reg);
> > +     }
> > +
> > +     return ret;
> > +}
> > +
> > +static int ds4424_remove(struct i2c_client *client) {
> > +     struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > +     struct ds4424_data *data = iio_priv(indio_dev);
> > +
> > +     iio_device_unregister(indio_dev);
> > +     regulator_disable(data->vcc_reg);
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct i2c_device_id ds4424_id[] = {
> > +     { "ds4422", ID_DS4422 },
> > +     { "ds4424", ID_DS4424 },
> > +     { }
> > +};
> > +
> > +MODULE_DEVICE_TABLE(i2c, ds4424_id);
> > +
> > +static const struct of_device_id ds4424_of_match[] = {
> > +     { .compatible = "maxim,ds4422" },
> > +     { .compatible = "maxim,ds4424" },
> > +     { },
> > +};
> > +
> > +MODULE_DEVICE_TABLE(of, ds4424_of_match);
> > +
> > +static struct i2c_driver ds4424_driver = {
> > +     .driver = {
> > +             .name   = "ds4424",
> > +             .of_match_table = ds4424_of_match,
> > +             .pm     = &ds4424_pm_ops,
> > +     },
> > +     .probe          = ds4424_probe,
> > +     .remove         = ds4424_remove,
> > +     .id_table       = ds4424_id,
> > +};
> > +module_i2c_driver(ds4424_driver);
> > +
> > +MODULE_DESCRIPTION("Maxim DS4424 DAC Driver");
> MODULE_AUTHOR("Ismail
> > +H. Kose <ismail.kose@maximintegrated.com>");
> > +MODULE_AUTHOR("Vishal Sood <vishal.sood@maximintegrated.com>");
> > +MODULE_AUTHOR("David Jung <david.jung@maximintegrated.com>");
> > +MODULE_LICENSE("GPL v2");
> >
> 
> --
> 
> Peter Meerwald-Stadler
> Mobile: +43 664 24 44 418
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
kbuild test robot Sept. 19, 2017, 1:34 p.m. UTC | #3
Hi Ismail,

[auto build test WARNING on iio/togreg]
[also build test WARNING on v4.14-rc1 next-20170919]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Ismail-Kose/iio-dac-ds4422-ds4424-dac-driver/20170919-205022
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: ia64-allyesconfig (attached as .config)
compiler: ia64-linux-gcc (GCC) 6.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=ia64 

All warnings (new ones prefixed by >>):

>> drivers/iio/dac/ds4424.c:62:2: warning: 'unused' attribute ignored [-Wattributes]
     __maybe_unused uint16_t save[DS4424_MAX_DAC_CHANNELS];
     ^~~~~~~~~~~~~~
   drivers/iio/dac/ds4424.c: In function 'ds4424_parse_dt':
   drivers/iio/dac/ds4424.c:232:6: warning: unused variable 'count' [-Wunused-variable]
     int count;
         ^~~~~

vim +/unused +62 drivers/iio/dac/ds4424.c

    58	
    59	struct ds4424_data {
    60		struct i2c_client *client;
    61		struct mutex lock;
  > 62		__maybe_unused uint16_t save[DS4424_MAX_DAC_CHANNELS];
    63		uint32_t rfs_res[DS4424_MAX_DAC_CHANNELS];
    64		struct regulator *vcc_reg;
    65		uint8_t raw[DS4424_MAX_DAC_CHANNELS];
    66	};
    67	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/iio/dac/ds4424.txt b/Documentation/devicetree/bindings/iio/dac/ds4424.txt
new file mode 100644
index 000000000000..840b11e1d813
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ds4424.txt
@@ -0,0 +1,20 @@ 
+Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC Device Driver
+
+Datasheet publicly available at:
+https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf
+
+Required properties:
+	- compatible: Must be "maxim,ds4422" or "maxim,ds4424"
+	- reg: Should contain the DAC I2C address
+	- maxim,rfs-resistors-ohms: Should contain reference resistor
+
+Optional properties:
+	- vcc-supply: Power supply is optional. If not defined, driver will ignore it.
+
+Example:
+	ds4224@10 {
+		compatible = "maxim,ds4424";
+		reg = <0x10>; /* When A0, A1 pins are ground */
+		vcc-supply = "dac_vcc_3v3";
+		maxim,rfs-resistors-ohms = <400 800 1000 1600>;
+	};
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index 25bed2d7d2b9..db6ceba1c76f 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -310,4 +310,13 @@  config VF610_DAC
 	  This driver can also be built as a module. If so, the module will
 	  be called vf610_dac.
 
+config DS4424
+	tristate "Maxim Integrated DS4422/DS4424 DAC driver"
+	depends on I2C
+	help
+	  If you say yes here you get support for Maxim chips DS4422, DS4424.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ds4424.
+
 endmenu
diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index 603587cc2f07..f29f929a0587 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -33,3 +33,4 @@  obj-$(CONFIG_MCP4922) += mcp4922.o
 obj-$(CONFIG_STM32_DAC_CORE) += stm32-dac-core.o
 obj-$(CONFIG_STM32_DAC) += stm32-dac.o
 obj-$(CONFIG_VF610_DAC) += vf610_dac.o
+obj-$(CONFIG_DS4424) += ds4424.o
diff --git a/drivers/iio/dac/ds4424.c b/drivers/iio/dac/ds4424.c
new file mode 100644
index 000000000000..46ae28081cf0
--- /dev/null
+++ b/drivers/iio/dac/ds4424.c
@@ -0,0 +1,399 @@ 
+/*
+ * Maxim Integrated
+ * 7-bit, Multi-Channel Sink/Source Current DAC Driver
+ * Copyright (C) 2017 Maxim Integrated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/machine.h>
+#include <linux/iio/consumer.h>
+
+#define DS4422_MAX_DAC_CHANNELS		2
+#define DS4424_MAX_DAC_CHANNELS		4
+
+#define DS4424_DAC_ADDR(chan)   ((chan) + 0xf8)
+#define DS4424_SOURCE_I		1
+#define DS4424_SINK_I		0
+
+#define DS4424_CHANNEL(chan) { \
+	.type = IIO_CURRENT, \
+	.indexed = 1, \
+	.output = 1, \
+	.channel = chan, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.address = DS4424_DAC_ADDR(chan), \
+}
+
+/*
+ * DS4424 DAC control register 8 bits
+ * [7]		0: to sink; 1: to source
+ * [6:0]	steps to sink/source
+ * bit[7] looks like a sign bit, but the value of the register is
+ * not a two's complement code considering the bit[6:0] is a absolute
+ * distance from the zero point.
+ */
+union ds4424_raw_data {
+	struct {
+		u8 dx:7;
+		u8 source_bit:1;
+	};
+	u8 bits;
+};
+
+enum ds4424_device_ids {
+	ID_DS4422,
+	ID_DS4424,
+};
+
+struct ds4424_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	__maybe_unused uint16_t save[DS4424_MAX_DAC_CHANNELS];
+	uint32_t rfs_res[DS4424_MAX_DAC_CHANNELS];
+	struct regulator *vcc_reg;
+	uint8_t raw[DS4424_MAX_DAC_CHANNELS];
+};
+
+static const struct iio_chan_spec ds4424_channels[] = {
+	DS4424_CHANNEL(0),
+	DS4424_CHANNEL(1),
+	DS4424_CHANNEL(2),
+	DS4424_CHANNEL(3),
+};
+
+static int ds4424_get_value(struct iio_dev *indio_dev,
+			     int *val, int channel)
+{
+	struct ds4424_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = i2c_smbus_read_byte_data(data->client, DS4424_DAC_ADDR(channel));
+	if (ret < 0)
+		goto fail;
+
+	*val = ret;
+	mutex_unlock(&data->lock);
+	return 0;
+
+fail:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static int ds4424_set_value(struct iio_dev *indio_dev,
+			     int val, struct iio_chan_spec const *chan)
+{
+	struct ds4424_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (val < 0 || val > U8_MAX)
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+	ret = i2c_smbus_write_byte_data(data->client,
+			DS4424_DAC_ADDR(chan->channel), val);
+	if (ret < 0) {
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+
+	data->raw[chan->channel] = val;
+	mutex_unlock(&data->lock);
+
+	return 0;
+}
+
+static int ds4424_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	union ds4424_raw_data raw;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = ds4424_get_value(indio_dev, val, chan->channel);
+		if (ret < 0) {
+			pr_err("%s : ds4424_get_value returned %d\n",
+							__func__, ret);
+			return ret;
+		}
+		raw.bits = *val;
+		*val = raw.dx;
+		if (raw.source_bit == DS4424_SINK_I)
+			*val = -*val;
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ds4424_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	union ds4424_raw_data raw;
+
+	if (val2 != 0)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (val < S8_MIN || val > S8_MAX)
+			return -EINVAL;
+
+		if (val > 0) {
+			raw.source_bit = DS4424_SOURCE_I;
+			raw.dx = val;
+		} else {
+			raw.source_bit = DS4424_SINK_I;
+			raw.dx = -val;
+		}
+
+		return ds4424_set_value(indio_dev, raw.bits, chan);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ds4424_verify_chip(struct iio_dev *indio_dev)
+{
+	int ret = 0, val;
+
+	ret = ds4424_get_value(indio_dev, &val, DS4424_DAC_ADDR(0));
+	if (ret < 0)
+		dev_err(&indio_dev->dev,
+				"%s failed. ret: %d\n", __func__, ret);
+
+	return ret;
+}
+
+static int __maybe_unused ds4424_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct ds4424_data *data = iio_priv(indio_dev);
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < indio_dev->num_channels; i++) {
+		data->save[i] = data->raw[i];
+		ret = ds4424_set_value(indio_dev, 0,
+				&indio_dev->channels[i]);
+		if (ret < 0)
+			return ret;
+	}
+	return ret;
+}
+
+static int __maybe_unused ds4424_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct ds4424_data *data = iio_priv(indio_dev);
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < indio_dev->num_channels; i++) {
+		ret = ds4424_set_value(indio_dev, data->save[i],
+				&indio_dev->channels[i]);
+		if (ret < 0)
+			return ret;
+	}
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(ds4424_pm_ops, ds4424_suspend, ds4424_resume);
+
+static const struct iio_info ds4424_info = {
+	.read_raw = ds4424_read_raw,
+	.write_raw = ds4424_write_raw,
+};
+
+#ifdef CONFIG_OF
+static int ds4424_parse_dt(struct iio_dev *indio_dev)
+{
+	int ret;
+	int len;
+	int count;
+	struct property *prop;
+	struct ds4424_data *data = iio_priv(indio_dev);
+	struct device_node *node = indio_dev->dev.of_node;
+
+	if (!node) {
+		pr_info("%s:%d ds4424 DT not found\n", __func__, __LINE__);
+		return -ENODEV;
+	}
+
+	prop = of_find_property(node, "maxim,rfs-resistors-ohms", &len);
+	if (!prop) {
+		pr_err("ds4424 maxim,rfs-resistor not found in DT.\n");
+		return -EINVAL;
+	}
+
+	if (len != (DS4424_MAX_DAC_CHANNELS * sizeof(uint32_t))) {
+		pr_err("ds4424 maxim,rfs-resistor length in DT not valid.\n");
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32_array(node, "maxim,rfs-resistors-ohms",
+				 data->rfs_res, DS4424_MAX_DAC_CHANNELS);
+	if (ret < 0) {
+		pr_err("ds4424 reading maxim,rfs-resistors from DT failed.\n");
+		return ret;
+	}
+
+	pr_info("ds4424 maxim,rfs-resistors: %d, %d, %d, %d\n",
+			data->rfs_res[0], data->rfs_res[1],
+			data->rfs_res[2], data->rfs_res[3]);
+
+	return 0;
+}
+#else
+static int ds4424_parse_dt(struct iio_dev *indio_dev)
+{
+	return -ENODEV;
+}
+#endif
+
+static int ds4424_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct ds4424_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev) {
+		dev_err(&client->dev, "iio dev alloc failed.\n");
+		return -ENOMEM;
+	}
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	indio_dev->name = id->name;
+	indio_dev->dev.of_node = client->dev.of_node;
+	indio_dev->dev.parent = &client->dev;
+
+	if (!client->dev.of_node) {
+		dev_err(&client->dev,
+				"Not found DT.\n");
+		return -EPERM;
+	}
+
+	indio_dev->dev.of_node = client->dev.of_node;
+	ret = ds4424_parse_dt(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev,
+				"%s - of_node error\n", __func__);
+		return -EINVAL;
+	}
+
+	data->vcc_reg = devm_regulator_get(&client->dev, "vcc");
+	if (IS_ERR(data->vcc_reg)) {
+		ret = PTR_ERR(data->vcc_reg);
+		dev_err(&client->dev,
+			"Failed to get vcc-supply regulator: %d\n", ret);
+		return ret;
+	}
+
+	mutex_init(&data->lock);
+	ret = regulator_enable(data->vcc_reg);
+	if (ret < 0) {
+		dev_err(&client->dev,
+				"Unable to enable the regulator.\n");
+		return ret;
+	}
+
+	usleep_range(1000, 1200);
+	ret = ds4424_verify_chip(indio_dev);
+	if (ret < 0)
+		return -ENXIO;
+
+	switch (id->driver_data) {
+	case ID_DS4422:
+		indio_dev->num_channels = DS4422_MAX_DAC_CHANNELS;
+		break;
+	case ID_DS4424:
+		indio_dev->num_channels = DS4424_MAX_DAC_CHANNELS;
+		break;
+	default:
+		dev_err(&client->dev,
+				"ds4424: Invalid chip id.\n");
+		regulator_disable(data->vcc_reg);
+		return -ENXIO;
+	}
+
+	indio_dev->channels = ds4424_channels;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &ds4424_info;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev,
+				"iio_device_register failed. ret: %d\n", ret);
+		regulator_disable(data->vcc_reg);
+	}
+
+	return ret;
+}
+
+static int ds4424_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct ds4424_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	regulator_disable(data->vcc_reg);
+
+	return 0;
+}
+
+static const struct i2c_device_id ds4424_id[] = {
+	{ "ds4422", ID_DS4422 },
+	{ "ds4424", ID_DS4424 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, ds4424_id);
+
+static const struct of_device_id ds4424_of_match[] = {
+	{ .compatible = "maxim,ds4422" },
+	{ .compatible = "maxim,ds4424" },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, ds4424_of_match);
+
+static struct i2c_driver ds4424_driver = {
+	.driver = {
+		.name	= "ds4424",
+		.of_match_table = ds4424_of_match,
+		.pm     = &ds4424_pm_ops,
+	},
+	.probe		= ds4424_probe,
+	.remove		= ds4424_remove,
+	.id_table	= ds4424_id,
+};
+module_i2c_driver(ds4424_driver);
+
+MODULE_DESCRIPTION("Maxim DS4424 DAC Driver");
+MODULE_AUTHOR("Ismail H. Kose <ismail.kose@maximintegrated.com>");
+MODULE_AUTHOR("Vishal Sood <vishal.sood@maximintegrated.com>");
+MODULE_AUTHOR("David Jung <david.jung@maximintegrated.com>");
+MODULE_LICENSE("GPL v2");