OMAP: omap_device: replace pr_* prints with dev_*
diff mbox

Message ID 20110721174306.GD32058@legolas.emea.dhcp.ti.com
State New, archived
Headers show

Commit Message

Felipe Balbi July 21, 2011, 5:43 p.m. UTC
On Thu, Jul 21, 2011 at 10:39:36AM -0700, Kevin Hilman wrote:
> For consistency in kernel printk output for devices, use dev_dbg(),
> dev_warn(), dev_err() instead of pr_debug(), pr_warning() and
> pr_err(), some of which currently use direct access of name from
> platform_device and others of which use dev_name().  Using the dev_*
> versions uses the standard device naming from the driver core.
> 
> Some pr_* prints were not converted with this patch since they are
> used before the platform_device and struct device are created so
> neither the dev_* prints or dev_name() is valid.
> 
> Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
> Cc: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Kevin Hilman <khilman@ti.com>
> ---

FWIW:

Reviewed-by: Felipe Balbi <balbi@ti.com>

BTW, I tried applying this to today's linus/master, but it fails
(rejects below), are you depending on some other changes ?

Comments

Kevin Hilman July 21, 2011, 6:52 p.m. UTC | #1
On Thu, 2011-07-21 at 20:43 +0300, Felipe Balbi wrote:
> On Thu, Jul 21, 2011 at 10:39:36AM -0700, Kevin Hilman wrote:
> > For consistency in kernel printk output for devices, use dev_dbg(),
> > dev_warn(), dev_err() instead of pr_debug(), pr_warning() and
> > pr_err(), some of which currently use direct access of name from
> > platform_device and others of which use dev_name().  Using the dev_*
> > versions uses the standard device naming from the driver core.
> > 
> > Some pr_* prints were not converted with this patch since they are
> > used before the platform_device and struct device are created so
> > neither the dev_* prints or dev_name() is valid.
> > 
> > Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
> > Cc: Felipe Balbi <balbi@ti.com>
> > Signed-off-by: Kevin Hilman <khilman@ti.com>
> > ---
> 
> FWIW:
> 
> Reviewed-by: Felipe Balbi <balbi@ti.com>

Thanks.

> BTW, I tried applying this to today's linus/master, but it fails
> (rejects below), are you depending on some other changes ?

Oops, I forgot to mention it applies on top of a bunch of stuff queued
for v3.1.  Specifically, it's on top of Paul's prcm-devel-3.1 branch[1],
which Arnd has merged into the arm-soc tree.

Kevin

[1] git://git.pwsan.com/linux-2.6 prcm-devel-3.1

> --- arch/arm/plat-omap/omap_device.c
> +++ arch/arm/plat-omap/omap_device.c
> @@ -242,28 +239,27 @@
>  	if (!clk_alias || !clk_name)
>  		return;
>  
> -	pr_debug("omap_device: %s: Creating %s -> %s\n",
> -		 dev_name(&od->pdev.dev), clk_alias, clk_name);
> +	dev_dbg(&od->pdev.dev, "Creating %s -> %s\n", clk_alias, clk_name);
>  
>  	r = clk_get_sys(dev_name(&od->pdev.dev), clk_alias);
>  	if (!IS_ERR(r)) {
> -		pr_warning("omap_device: %s: alias %s already exists\n",
> -			   dev_name(&od->pdev.dev), clk_alias);
> +		dev_warn(&od->pdev.dev,
> +			 "alias %s already exists\n", clk_alias);
>  		clk_put(r);
>  		return;
>  	}
>  
>  	r = omap_clk_get_by_name(clk_name);
>  	if (IS_ERR(r)) {
> -		pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n",
> -		       dev_name(&od->pdev.dev), clk_name);
> +		dev_err(&od->pdev.dev,
> +			"omap_clk_get_by_name for %s failed\n", clk_name);
>  		return;
>  	}
>  
>  	l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev.dev));
>  	if (!l) {
> -		pr_err("omap_device: %s: clkdev_alloc for %s failed\n",
> -		       dev_name(&od->pdev.dev), clk_alias);
> +		dev_err(&od->pdev.dev,
> +			"clkdev_alloc for %s failed\n", clk_alias);
>  		return;
>  	}
>  
>

Patch
diff mbox

--- arch/arm/plat-omap/omap_device.c
+++ arch/arm/plat-omap/omap_device.c
@@ -242,28 +239,27 @@ 
 	if (!clk_alias || !clk_name)
 		return;
 
-	pr_debug("omap_device: %s: Creating %s -> %s\n",
-		 dev_name(&od->pdev.dev), clk_alias, clk_name);
+	dev_dbg(&od->pdev.dev, "Creating %s -> %s\n", clk_alias, clk_name);
 
 	r = clk_get_sys(dev_name(&od->pdev.dev), clk_alias);
 	if (!IS_ERR(r)) {
-		pr_warning("omap_device: %s: alias %s already exists\n",
-			   dev_name(&od->pdev.dev), clk_alias);
+		dev_warn(&od->pdev.dev,
+			 "alias %s already exists\n", clk_alias);
 		clk_put(r);
 		return;
 	}
 
 	r = omap_clk_get_by_name(clk_name);
 	if (IS_ERR(r)) {
-		pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n",
-		       dev_name(&od->pdev.dev), clk_name);
+		dev_err(&od->pdev.dev,
+			"omap_clk_get_by_name for %s failed\n", clk_name);
 		return;
 	}
 
 	l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev.dev));
 	if (!l) {
-		pr_err("omap_device: %s: clkdev_alloc for %s failed\n",
-		       dev_name(&od->pdev.dev), clk_alias);
+		dev_err(&od->pdev.dev,
+			"clkdev_alloc for %s failed\n", clk_alias);
 		return;
 	}