[1/2] drm/vc4: Reject HDMI modes with too high of clocks.
diff mbox

Message ID 20170920225935.14566-1-eric@anholt.net
State New
Headers show

Commit Message

Eric Anholt Sept. 20, 2017, 10:59 p.m. UTC
Peter Robinson reported issues on Fedora with 4k monitors not having
their modes filtered down to 1920x1080 on Raspberry Pi.  Hopefully
this resolves that.

Cc: Peter Robinson <pbrobinson@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---

Note: This is an untested patch, since I'm away from hardware
currently.

 drivers/gpu/drm/vc4/vc4_hdmi.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Patch
diff mbox

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index fa37a1c07cf6..65826a4f208e 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -694,7 +694,22 @@  static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
 	}
 }
 
+static enum drm_mode_status
+vc5_hdmi_encoder_mode_valid(struct drm_encoder *crtc,
+			    const struct drm_display_mode *mode)
+{
+	/* HSM clock must be 108% of the pixel clock.  Additionally,
+	 * the AXI clock needs to be at least 25% of pixel clock, but
+	 * HSM ends up being the limiting factor.
+	 */
+	if (mode->clock > HSM_CLOCK_FREQ / (1000 * 108 / 100))
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
 static const struct drm_encoder_helper_funcs vc4_hdmi_encoder_helper_funcs = {
+	.mode_valid = vc5_hdmi_encoder_mode_valid,
 	.disable = vc4_hdmi_encoder_disable,
 	.enable = vc4_hdmi_encoder_enable,
 };