Message ID | 20171011110229.24413-5-luca@z3ntu.xyz (mailing list archive) |
---|---|
State | Accepted, archived |
Delegated to: | Andy Gross |
Headers | show |
On Wed 11 Oct 04:02 PDT 2017, Luca Weiss wrote: > This introduces the usb node which can be used e.g. for USB_ETH > Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > --- > arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 25 ++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts > index c42e70d7158f..d0a5df90b543 100644 > --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts > +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts > @@ -279,6 +279,31 @@ > pinctrl-names = "default"; > pinctrl-0 = <&sdhc1_pin_a>; > }; > + > + usb@f9a55000 { > + status = "ok"; > + > + phys = <&usb_hs1_phy>; > + phy-select = <&tcsr 0xb000 0>; > + extcon = <&smbb>, <&usb_id>; > + vbus-supply = <&chg_otg>; > + > + hnp-disable; > + srp-disable; > + adp-disable; > + > + ulpi { > + phy@a { > + status = "ok"; > + > + v1p8-supply = <&pm8941_l6>; > + v3p3-supply = <&pm8941_l24>; > + > + extcon = <&smbb>; > + qcom,init-seq = /bits/ 8 <0x1 0x64>; > + }; > + }; > + }; > }; > > &spmi_bus { > -- > 2.14.2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts index c42e70d7158f..d0a5df90b543 100644 --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts @@ -279,6 +279,31 @@ pinctrl-names = "default"; pinctrl-0 = <&sdhc1_pin_a>; }; + + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; }; &spmi_bus {
This introduces the usb node which can be used e.g. for USB_ETH Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 25 ++++++++++++++++++++++++ 1 file changed, 25 insertions(+)