mbox series

[v3,0/7] PinePhone BT audio bringup

Message ID 20210430035859.3487-1-samuel@sholland.org (mailing list archive)
Headers show
Series PinePhone BT audio bringup | expand

Message

Samuel Holland April 30, 2021, 3:58 a.m. UTC
This series uses the additional DAIs added to the sun8i-codec driver to
add hardware routing for BT SCO (headset) audio on the PinePhone.

The BT audio connection is represented by the "dummy" bt-sco codec. The
connection to the Quectel EG-25G modem via AIF2 works as well, but I do
not include it here because there is no appropriate codec driver in
tree. We have been using an out-of-tree "dummy" codec driver for the
modem similar to bt-sco, and I'm not sure if such a driver would be
desired upstream.

Changes from v2:
  - Also accept #sound-dai-cells in the binding. Since dt-core.yaml
    already sets the type of this property, it is not possible to use
    oneOf, nor make a specific value deprecated.

Changes from v1:
  - Fixed DT binding example to follow new binding

Arnaud Ferraris (1):
  arm64: dts: allwinner: pinephone: Set audio card name

Samuel Holland (6):
  ASoC: dt-bindings: sun8i-codec: Increase #sound-dai-cells
  ARM: dts: sun8i-a33: Allow using multiple codec DAIs
  arm64: dts: allwinner: a64: Allow using multiple codec DAIs
  arm64: dts: allwinner: a64: Add pinmux nodes for AIF2/AIF3
  arm64: dts: allwinner: a64: Allow multiple DAI links
  arm64: dts: allwinner: pinephone: Add support for Bluetooth audio

 .../sound/allwinner,sun8i-a33-codec.yaml      |  8 +++-
 arch/arm/boot/dts/sun8i-a33.dtsi              |  4 +-
 .../dts/allwinner/sun50i-a64-pinephone.dtsi   | 25 +++++++++++++
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 37 ++++++++++++++-----
 4 files changed, 60 insertions(+), 14 deletions(-)

Comments

Maxime Ripard May 7, 2021, 8:09 a.m. UTC | #1
On Thu, Apr 29, 2021 at 10:58:52PM -0500, Samuel Holland wrote:
> This series uses the additional DAIs added to the sun8i-codec driver to
> add hardware routing for BT SCO (headset) audio on the PinePhone.
> 
> The BT audio connection is represented by the "dummy" bt-sco codec. The
> connection to the Quectel EG-25G modem via AIF2 works as well, but I do
> not include it here because there is no appropriate codec driver in
> tree. We have been using an out-of-tree "dummy" codec driver for the
> modem similar to bt-sco, and I'm not sure if such a driver would be
> desired upstream.

I've applied patches 1-6

Maxime
Mark Brown May 11, 2021, 8:26 a.m. UTC | #2
On Thu, 29 Apr 2021 22:58:52 -0500, Samuel Holland wrote:
> This series uses the additional DAIs added to the sun8i-codec driver to
> add hardware routing for BT SCO (headset) audio on the PinePhone.
> 
> The BT audio connection is represented by the "dummy" bt-sco codec. The
> connection to the Quectel EG-25G modem via AIF2 works as well, but I do
> not include it here because there is no appropriate codec driver in
> tree. We have been using an out-of-tree "dummy" codec driver for the
> modem similar to bt-sco, and I'm not sure if such a driver would be
> desired upstream.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/7] ASoC: dt-bindings: sun8i-codec: Increase #sound-dai-cells
      commit: 880e007f15a31f446b9e1713720c6ae5a539f3f4

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark